RESUMEN
BACKGROUND: Although hydraulic support can help enterprises in their production activities, it can also cause fatal accidents. METHODS: This study established a composite risk-assessment method for hydraulic support failure in the mining industry. The key basic event of hydraulic support failure was identified based on fault tree analysis and gray relational analysis, and the evolution mechanism of hydraulic support failure was investigated based on chaos theory, a synthetic theory model, and cause-and-effect-layer-of-protection analysis (LOPA). RESULTS: After the basic events of hydraulic support failure are identified based on fault tree analysis, structure importance (SI), probability importance (PI), critical importance (CI), and Fussell-Vesely importance (FVI) can be calculated. In this study, we proposed the Fussell-Vesely-Xu importance (FVXI) to reflect the comprehensive impact of basic event occurrence and nonoccurrence on the occurrence probability of the top event. Gray relational analysis was introduced to determine the integrated importance (II) of basic events and identify the key basic events. According to chaos theory, hydraulic support failure is the result of cross-coupling and infinite amplification of faults in the employee, object, environment, and management subsystems, and the evolutionary process has an obvious butterfly effect and inherent randomness. With the help of the synthetic theory model, we investigated the social and organizational factors that may lead to hydraulic support failure. The key basic event, jack leakage, was analyzed in depth based on cause-and-effect-LOPA, and corresponding independent protection layers (IPLs) were identified to prevent jack leakage. IMPLICATIONS: The implications of these findings with respect to hydraulic support failure can be regarded as the foundation for accident prevention in practice.
Asunto(s)
Salud Laboral , Accidentes , Probabilidad , Medición de RiesgoRESUMEN
The original PRIDE Inspector tool was developed as an open source standalone tool to enable the visualization and validation of mass-spectrometry (MS)-based proteomics data before data submission or already publicly available in the Proteomics Identifications (PRIDE) database. The initial implementation of the tool focused on visualizing PRIDE data by supporting the PRIDE XML format and a direct access to private (password protected) and public experiments in PRIDE.The ProteomeXchange (PX) Consortium has been set up to enable a better integration of existing public proteomics repositories, maximizing its benefit to the scientific community through the implementation of standard submission and dissemination pipelines. Within the Consortium, PRIDE is focused on supporting submissions of tandem MS data. The increasing use and popularity of the new Proteomics Standards Initiative (PSI) data standards such as mzIdentML and mzTab, and the diversity of workflows supported by the PX resources, prompted us to design and implement a new suite of algorithms and libraries that would build upon the success of the original PRIDE Inspector and would enable users to visualize and validate PX "complete" submissions. The PRIDE Inspector Toolsuite supports the handling and visualization of different experimental output files, ranging from spectra (mzML, mzXML, and the most popular peak lists formats) and peptide and protein identification results (mzIdentML, PRIDE XML, mzTab) to quantification data (mzTab, PRIDE XML), using a modular and extensible set of open-source, cross-platform libraries. We believe that the PRIDE Inspector Toolsuite represents a milestone in the visualization and quality assessment of proteomics data. It is freely available at http://github.com/PRIDE-Toolsuite/.
Asunto(s)
Biología Computacional/métodos , Bases de Datos de Proteínas , Proteoma/metabolismo , Proteómica/métodos , Programas Informáticos , Internet , Reproducibilidad de los Resultados , Espectrometría de Masas en TándemRESUMEN
The PRoteomics IDEntifications (PRIDE) database is one of the world-leading data repositories of mass spectrometry (MS)-based proteomics data. Since the beginning of 2014, PRIDE Archive (http://www.ebi.ac.uk/pride/archive/) is the new PRIDE archival system, replacing the original PRIDE database. Here we summarize the developments in PRIDE resources and related tools since the previous update manuscript in the Database Issue in 2013. PRIDE Archive constitutes a complete redevelopment of the original PRIDE, comprising a new storage backend, data submission system and web interface, among other components. PRIDE Archive supports the most-widely used PSI (Proteomics Standards Initiative) data standard formats (mzML and mzIdentML) and implements the data requirements and guidelines of the ProteomeXchange Consortium. The wide adoption of ProteomeXchange within the community has triggered an unprecedented increase in the number of submitted data sets (around 150 data sets per month). We outline some statistics on the current PRIDE Archive data contents. We also report on the status of the PRIDE related stand-alone tools: PRIDE Inspector, PRIDE Converter 2 and the ProteomeXchange submission tool. Finally, we will give a brief update on the resources under development 'PRIDE Cluster' and 'PRIDE Proteomes', which provide a complementary view and quality-scored information of the peptide and protein identification data available in PRIDE Archive.
Asunto(s)
Bases de Datos de Proteínas , Espectrometría de Masas , Proteómica , Péptidos/química , Proteínas/química , Proteínas/metabolismo , Programas Informáticos , Interfaz Usuario-ComputadorRESUMEN
The HUPO Proteomics Standards Initiative has developed several standardized data formats to facilitate data sharing in mass spectrometry (MS)-based proteomics. These allow researchers to report their complete results in a unified way. However, at present, there is no format to describe the final qualitative and quantitative results for proteomics and metabolomics experiments in a simple tabular format. Many downstream analysis use cases are only concerned with the final results of an experiment and require an easily accessible format, compatible with tools such as Microsoft Excel or R. We developed the mzTab file format for MS-based proteomics and metabolomics results to meet this need. mzTab is intended as a lightweight supplement to the existing standard XML-based file formats (mzML, mzIdentML, mzQuantML), providing a comprehensive summary, similar in concept to the supplemental material of a scientific publication. mzTab files can contain protein, peptide, and small molecule identifications together with experimental metadata and basic quantitative information. The format is not intended to store the complete experimental evidence but provides mechanisms to report results at different levels of detail. These range from a simple summary of the final results to a representation of the results including the experimental design. This format is ideally suited to make MS-based proteomics and metabolomics results available to a wider biological community outside the field of MS. Several software tools for proteomics and metabolomics have already adapted the format as an output format. The comprehensive mzTab specification document and extensive additional documentation can be found online.
Asunto(s)
Bases de Datos de Proteínas , Programas Informáticos , Acceso a la Información , Espectrometría de Masas , Metabolómica , Proteómica , Interfaz Usuario-ComputadorRESUMEN
mzTab is the most recent standard format developed by the Proteomics Standards Initiative. mzTab is a flexible tab-delimited file that can capture identification and quantification results coming from MS-based proteomics and metabolomics approaches. We here present an open-source Java application programming interface for mzTab called jmzTab. The software allows the efficient processing of mzTab files, providing read and write capabilities, and is designed to be embedded in other software packages. The second key feature of the jmzTab model is that it provides a flexible framework to maintain the logical integrity between the metadata and the table-based sections in the mzTab files. In this article, as two example implementations, we also describe two stand-alone tools that can be used to validate mzTab files and to convert PRIDE XML files to mzTab. The library is freely available at http://mztab.googlecode.com.
Asunto(s)
Espectrometría de Masas/métodos , Proteómica/métodos , Programas Informáticos , Metabolómica/métodos , Interfaz Usuario-ComputadorRESUMEN
Excessive cavity pressure may result in a sand casting explosion, and corresponding measures should be adopted to prevent these consequences. In this study, the pressure variations in the cavity were first investigated based upon on-site testing by taking the resin contents into consideration, and then the evolution characteristics of sand casting explosion accidents were analyzed in depth by system dynamics, chaos theory, and the bow-tie model. When the resin contents are 1.3 wt%, 1.4 wt%, and 1.5 wt%, the pressures of the gas vent increase by 27.0 Pa, 32.8 Pa, and 35.6 Pa, respectively. To reduce the pressure of the cavity, the resin content should be reduced. The evolutionary process of sand casting explosion accidents has a noticeable butterfly effect and randomness, whose occurrence is comprehensively affected by human, object, environment, management and emergency subsystems. The leading causes of sand casting explosion accidents mainly include the extensive gas evolution characteristics of foundry sand, cavity exhaust blockage, and inadequate safety monitoring. The leading consequences of sand casting explosion accidents mainly include casualties, secondary disasters, and social panic. The implications of these findings concerning sand casting explosion accidents can be regarded as the foundation for accident prevention in practice.
RESUMEN
Introduction: The incorporation of green manures substantially enhances the conversion of external phosphorus (P) fertilizers and soil-reserved P into forms readily available to plants. The study aims to evaluate the influence of green manure additions on soil phosphorus dynamics and citrus growth, considering different green manure species and initial soil phosphorus levels. Additionally, the research seeks to elucidate the microbiological mechanisms underlying the observed effects. Methods: A citrus pot experiment was conducted under both P-surplus (1.50 g·P·kg-1) and P-deficient (0.17 g·P·kg-1) soils with incorporating legume (Leg), non-legume (Non-Leg) or no green manure residues (CK), and 18O-P labeled KH2PO4 (0.5 g, containing 80 δ18Op) was additionally introduced to trace the turnover characteristics of chemical P fertilizer mediated by soil microorganisms. Results and discussion: In P-surplus soil, compared with the CK treatment, the Leg treatment significantly increased soil H2O-Pi (13.6%), NaHCO3-Po (8.9%), NaOH-Pi (9.5%) and NaOH-Po (30.0%) content. It also promoted rapid turnover of P sources into H2O-Pi and NaHCO3-Pi pools by enhancing the phoC (576.6%) gene abundance. In contrast, the Non-Leg treatment significantly augmented soil H2O-Pi (9.2%) and NaHCO3-Po (8.5%) content, facilitating the turnover of P sources into NaHCO3-Pi pools. Under P-deficient soil conditions, compared with the CK treatment, the Leg treatment notably raised soil H2O-Pi (150.0%), NaHCO3-Pi (66.3%), NaHCO3-Po (34.8%) and NaOH-Pi (59.0%) content, contributing to the transfer of P sources into NaHCO3-Pi and NaOH-Pi pools. This effect was achieved through elevated ALP (33.8%) and ACP (12.9%) activities and increased pqqC (48.1%), phoC (42.9%), phoD (21.7%), and bpp (27.4%) gene abundances. The Non-Leg treatment, on the other hand, led to significant increases in soil NaHCO3-Pi (299.0%) and NaHCO3-Po (132.6%) content, thereby facilitating the turnover of P sources into NaHCO3-Pi and NaOH-Pi pools, except for the phoC gene abundance. Both Leg and Non-Leg treatments significantly improved citrus growth (7.3-20.0%) and P uptake (15.4-42.1%) in P-deficient soil but yielded no substantial effects in P-surplus soil. In summary, introducing green manure crops, particularly legume green manure, emerges as a valuable approach to enhance soil P availability and foster fruit tree growth in orchard production.
RESUMEN
Total leaf area per plant is an important measure of the photosynthetic capacity of an individual plant that together with plant density drives the canopy leaf area index, that is, the total leaf area per unit ground area. Because the total number of leaves per plant (or per shoot) varies among conspecifics and among mixed species communities, this variation can affect the total leaf area per plant and per canopy but has been little studied. Previous studies have shown a strong linear relationship between the total leaf area per plant (or per shoot) (A T) and the total number of leaves per plant (or per shoot) (N T) on a log-log scale for several growth forms. However, little is known whether such a scaling relationship also holds true for bamboos, which are a group of Poaceae plants with great ecological and economic importance in tropical, subtropical, and warm temperate regions. To test whether the scaling relationship holds true in bamboos, two dwarf bamboo species (Shibataea chinensis Nakai and Sasaella kongosanensis 'Aureostriatus') with a limited but large number of leaves per culm were examined. For the two species, the leaves from 480 and 500 culms, respectively, were sampled and A T was calculated by summing the areas of individual leaves per culm. Linear regression and correlation analyses reconfirmed that there was a significant log-log linear relationship between A T and N T for each species. For S. chinensis, the exponent of the A T versus N T scaling relationship was greater than unity, whereas that of S. kongosanensis 'Aureostriatus' was smaller than unity. The coefficient of variation in individual leaf area increased with increasing N T for each species. The data reconfirm that there is a strong positive power-law relationship between A T and N T for each of the two species, which may reflect adaptations of plants in response to intra- and inter-specific competition for light.
RESUMEN
This study focused on the extreme heavy rainstorm that occurred in Zhengzhou in July 2021; approximately 380 people were killed or missing as a result of this storm. To investigate the evolution behaviors of this rainstorm and take corresponding prevention measures, several methods and models were adopted, including cloud modeling, preliminary hazard analysis (PHA), fault tree analysis (FTA), bow-tie modeling, and chaos theory. The main reasons for this rainstorm can be divided into the following three aspects: force majeure, such as terrain and extreme weather conditions, issues with city construction, and insufficient emergency rescue. The secondary disasters caused by this rainstorm mainly include urban water logging, river flooding, and mountain torrents and landslides. The main causes of the subway line-5 accident that occurred can be described as follows: the location of the stabling yard was low, the relevant rules and regulations of the subway were not ideal, insufficient attention was given to the early warning information, and the emergency response mechanism was not ideal. Rainstorms result from the cross-coupling of faults in humans, objects, the environment, and management subsystems, and the evolution process shows an obvious butterfly effect. To prevent disasters caused by rainstorms, the following suggestions should be adopted: vigorously improve the risk awareness and emergency response capabilities of leading cadres, improve the overall level of urban disaster prevention and mitigation, reinforce the existing reservoirs in the city, strengthen the construction of sponge cities, and improve the capacity of urban disaster emergency rescue.
RESUMEN
The outbreak of Coronavirus Disease 2019 (COVID-19) at the end of 2019 turned into a global pandemic. To help analyze the spread and evolution of the virus, we collated and analyzed data related to the viral genome, sequence variations, and locations in temporal and spatial distribution from GISAID. Information from the Wikipedia web page and published research papers were categorized and mined to extract epidemiological data, which was then integrated with the public dataset. Genomic and epidemiological data were matched with public information, and the data quality was verified by manual curation. Finally, an online database centered on virus genomic information and epidemiological data can be freely accessible at https://www.biosino.org/kgcov/ , which is helpful to identify relevant knowledge and devising epidemic prevention and control policies in collaboration with disease control personnel.
Asunto(s)
COVID-19 , COVID-19/epidemiología , COVID-19/genética , Brotes de Enfermedades , Genómica , Humanos , Pandemias , SARS-CoV-2RESUMEN
Background: Construction activities not only provide the necessary conditions for citizens to live, but also cause fatal accidents. Methods: This study aimed to reveal the characteristics of fatal accidents in the construction industry in China based on statistical data. From 2010 to 2019, there were 6005 fatal accidents in China's construction industry causing 7275 deaths. The important features of these fatal accidents, such as the type, time of occurrence, site location, severity, and geographical region of the accident, were carefully analyzed. Results: There were 258 major and severe construction accidents causing 1037 deaths, accounting for 4.3% and 14.25% of the total number of construction accidents and deaths in this period, respectively. As an important finding, more deaths occurred in August and on Mondays. The greatest number of construction accidents took place along openings and edges, accounting for 22.9% of all fatal accidents. Taking into account their economic development level and number of employees, Qinghai and Hainan experienced a higher mortality rate than Jiangsu. Falls from a high place were the dominant type of construction accident, accounting for 51.66% of all accidents. However, collapses were the primary type of major and severe construction accident, accounting for 60.09% of such accidents. The predicted number of construction deaths in 2020 is 887 according to the GM(1,1) model. Corresponding safety measures should be adopted to improve the working environment of the construction industry. Implications: The implications of these results with respect to the characteristics of construction accidents can be regarded as the foundation for accident prevention in practice.
Asunto(s)
Industria de la Construcción , Prevención de Accidentes , Accidentes , Accidentes de Trabajo , China/epidemiología , Lugar de TrabajoRESUMEN
The metallurgical industry is a significant component of the national economy. The main purpose of this study was to establish a composite risk analysis method for fatal accidents in the metallurgical industry. We collected 152 fatal accidents in the Chinese metallurgical industry from 2001 to 2018, including 141 major accidents, 10 severe accidents, and 1 extraordinarily severe accident, together resulting in 731 deaths. Different from traffic or chemical industry accidents, most of the accidents in the metallurgical industry are poisoning and asphyxiation accidents, which account for 40% of the total number of fatal accidents. As the original statistical data of fatal accidents in the metallurgical industry have irregular fluctuations, the traditional prediction methods, such as linear or quadratic regression models, cannot be used to predict their future characteristics. To overcome this issue, the grey interval predicting method and the GM(1,1) model of grey system theory are introduced to predict the future characteristics of fatal accidents in the metallurgical industry. Different from a fault tree analysis or event tree analysis, the bow tie model integrates the basic causes, possible consequences, and corresponding safety measures of an accident in a transparent diagram. In this study, the bow tie model was used to identify the causes and consequences of fatal accidents in the metallurgical industry; then, corresponding safety measures were adopted to reduce the risk.
Asunto(s)
Accidentes de Trabajo , Liberación de Peligros Químicos , Metalurgia , Accidentes de Trabajo/mortalidad , China , HumanosRESUMEN
Safety assessment of a casting workshop will provide a clearer understanding of the important safety level required for a foundry. The main purpose of this study was to construct a composite safety assessment method to protect employee health using the cloud model and cause and effect-Layer of Protection Analysis (LOPA). In this study, the weights of evaluation indicators were determined using the subjective analytic hierarchy process and objective entropy weight method respectively. Then, to obtain the preference coefficient of the integrated weight more precisely, a new algorithm was proposed based on the least square method. Next, the safety level of the casting workshop was presented based on the qualitative and quantitative analysis of the cloud model, which realized the uncertainty conversion between qualitative concepts and their corresponding quantitative values, as well as taking the fuzziness and randomness into account; the validity of cloud model evaluation was validated by grey relational analysis. In addition, cause and effect was used to proactively identify factors that may lead to accidents. LOPA was used to correlate corresponding safety measures to the identified risk factors. 6 causes and 19 sub-causes that may contribute to accidents were identified, and 18 potential remedies, or independent protection layers (IPLs), were described as ways to protect employee health in foundry operations. A mechanical manufacturing business in Hunan, China was considered as a case study to demonstrate the applicability and benefits of the proposed safety assessment approach.
Asunto(s)
Salud Laboral , Algoritmos , China , Modelos Teóricos , IncertidumbreRESUMEN
Glycosyltransferases (GTs), a large class of carbohydrate-active enzymes, adds glycosyl moieties to various substrates to generate multiple bioactive compounds, including natural products with pharmaceutical or agrochemical values. Here, we first collected comprehensive information on GTs, including amino acid sequences, coding region sequences, available tertiary structures, protein classification families, catalytic reactions and metabolic pathways. Then, we developed sequence search and molecular docking processes for GTs, resulting in a GTs database (GTDB). In the present study, 520 179 GTs from approximately 21 647 species that involved in 394 kinds of different reactions were deposited in GTDB. GTDB has the following useful features: (i) text search is provided for retrieving the complete details of a query by combining multiple identifiers and data sources; (ii) a convenient browser allows users to browse data by different classifications and download data in batches; (iii) BLAST is offered for searching against pre-defined sequences, which can facilitate the annotation of the biological functions of query GTs; and lastly, (iv) GTdock using AutoDock Vina performs docking simulations of several GTs with the same single acceptor and displays the results based on 3Dmol.js allowing easy view of models.
Asunto(s)
Bases de Datos de Proteínas , Glicosiltransferasas , Secuencia de Aminoácidos , Ontología de Genes , Simulación del Acoplamiento Molecular , Anotación de Secuencia Molecular , Programas Informáticos , Interfaz Usuario-ComputadorRESUMEN
Determining the quality of red wine is based on many qualitative and quantitative factors. Compared with other evaluation methods, the cloud model has an uncertainty transformation between a qualitative concept and its corresponding quantitative value, and the uncertainty transformation included fuzziness and randomness, which is suitable for solving the complexity of red wine evaluation. This study introduced the cloud model into quality evaluation of red wine for the first time, and a novel algorithm of comprehensive cloud model was proposed based on an addition algorithm of two cloud models. Furthermore, to validate the cloud model adopted in our red wine evaluation system, we used the gray relational analysis and fuzzy evaluation method. The evaluation result for the red wine sample was Good, and the result confirmed that our cloud model can be used to evaluate the quality of red wine. PRACTICAL APPLICATIONS: In 2013, China surpassed France to become the largest country of red wine consumption in the world. Red wine is made by a natural fermentation process. There are several components that make up red wine, but the most abundant is grape juice. Ethyl alcohol is the second most abundant element and it is made naturally by the fermentation of the sugar in grape. There are more than 1,000 remaining components in the recipe for red wine, where 300 are comparatively important. Although the proportion of these components is not high, they are important factors in determining the quality of red wine. Sensory evaluation is the most common method used to determine the quality of red wine. This work has identified a cloud model that can be used, based on sensory evaluation, to determine the quality of red wine.
Asunto(s)
Vino/análisis , Algoritmos , China , Etanol/análisis , Control de Calidad , Vitis/químicaRESUMEN
Due to a wide range of applications, sand casting occupies an important position in modern casting practice. The main purpose of this study was to optimize the performance parameters of sand casting based on grey relational analysis and predict the missing data using back propagation (BP) neural network. First, the influence of human factors was eliminated by adopting the objective entropy weight method, which also saved manpower. The larger variation degree in the evaluation indicators, indicating that the evaluated projects had good discrimination in this regard, the larger weight should be given to these evaluation indicators. Second, the performance parameters of sand casting were optimized based on grey relational analysis, providing a reference for sand milling. The larger the grey relational degree, the closer the evaluated project was to the ideal project. Third, this paper provided a new method for determining the number of hidden neurons in a network according to the mean square error of training samples, and venting quality was predicted based on BP neural network. The relevant theory was deduced before predicting missing data, such that there will be a general understanding regarding the prediction principle of BP neural network. Fourth, to demonstrate the validity of BP neural network adopted in the process of missing data prediction, grey system theory was applied to compare the result of missing data prediction.
RESUMEN
BACKGROUND: The most renowned biological ontology, Gene Ontology (GO) is widely used for annotations of genes and gene products of different organisms. However, there are shortcomings in the Resource Description Framework (RDF) data file provided by the GO consortium: 1) Lack of sufficient semantic relationships between pairs of terms coming from the three independent GO sub-ontologies, that limit the power to provide complex semantic queries and inference services based on it. 2) The term-centric view of GO annotation data and the fact that all information is stored in a single file. This makes attempts to retrieve GO annotations based on big volume datasets unmanageable. 3) No support of GOSlim. RESULTS: We propose a RDF model, GORouter, which encodes heterogeneous original data in a uniform RDF format, creates additional ontology mappings between GO terms, and introduces a set of inference rulebases. Furthermore, we use the Oracle Network Data Model (NDM) as the native RDF data repository and the table function RDF_MATCH to seamlessly combine the result of RDF queries with traditional relational data. As a result, the scale of GORouter is minimized; information not directly involved in semantic inference is put into relational tables. CONCLUSION: Our work demonstrates how to use multiple semantic web tools and techniques to provide a mixture of semantic query and inference solutions of GO and its associations. GORouter is licensed under Apache License Version 2.0, and is accessible via the website: http://www.scbit.org/gorouter/.
Asunto(s)
Sistemas de Administración de Bases de Datos , Bases de Datos Genéticas , Genes/genética , Almacenamiento y Recuperación de la Información/métodos , Modelos Genéticos , Procesamiento de Lenguaje Natural , Algoritmos , Programas InformáticosRESUMEN
In neuroscience research, multiple electrodes are used to record simultaneous spiking activity of many neurons lossless in real time. Accordingly, to analyze the data from multiple electrodes, many algorithms and computer programs have been developed. Since these programs are developed by commercial companies or academic institutes independently, the lack of common standard makes the talks between them difficult. In one integrative analysis, when several of them are needed, neuroscience researchers are usually exhausted by the program switching and data transformation. In this paper, we developed an integrative workflow-based platform for multiple neural spike train data analysis, namely MEA-Platform. MEA-Platform is a Java-based software platform, which provides (1) a general application development interface to integrate or bridge other programs and (2) a workflow mechanism to operate them and make them talk easily. At the moment, many algorithms and tools abstracted from MEA-Tools, Spike manager and DATA-MEAns are integrated. They together provide comprehensive functionalities of data normalization, statistics and result reporting, which are indispensable for a complete analysis of multiple neural spike train data. Because the interface developed is very general and flexible, new analysis tools can be integrated effectively as required. MEA-Platform implies an ideal environment for integrative neuroscience research.
Asunto(s)
Potenciales de Acción/fisiología , Algoritmos , Electrofisiología/métodos , Neuronas/fisiología , Neurofisiología/métodos , Procesamiento de Señales Asistido por Computador , Programas Informáticos/normas , Animales , Electrofisiología/instrumentación , Humanos , Neurofisiología/instrumentación , Diseño de Software , Validación de Programas de ComputaciónRESUMEN
To effectively control air pollution, it is necessary to obtain a preliminary assessment of air quality. The purpose of this study was to introduce a cloud model method in air pollution assessment. First, the standard cloud models of air pollution indicators were obtained, and the calculating process of numerical characteristics employed by the standard cloud model was explained. Second, the levels of air pollution indicators were presented based on the qualitative and quantitative analysis of cloud models, which realized the uncertainty conversion between qualitative concepts and their corresponding quantitative values, as well as taking the fuzziness and randomness into account. Air quality assessment results including SO2, NO2, CO, O3, PM10 and PM2.5 were analysed. Third, the cloud model adopted in the assessment process of air quality was validated by grey relational analysis, and the results confirmed the validity of cloud model assessment. Fourth, the air pollution level of the air quality index (AQI) was determined, and the fuzziness and randomness of the assessment results were thoroughly analysed by taking entropy and hyper entropy into consideration. Fifth, seasonal variations in different air pollution indicators were analysed to proffer a series of recommendations for government policy decision-makers and travellers. The cloud model provided a new method for air quality assessment.