Subtrochanteric fracture after core decompression for osteonecrosis of the femoral head: a case report and literature review.

BACKGROUND: Osteonecrosis of the femoral head (ONFH) is a common clinical disease. Improper treatment can lead to femoral head collapse and hip joint dysfunction. Core decompression is particularly important for early ONFH. However, subtrochanteric fractures after core decompression cause some clinical problems. CASE PRESENTATION: This article describes a 34-year-old male patient with early ONFH. After core decompression, he suffered a subtrochanteric fracture of the femur while bearing weight on the affected limb when going up stairs. He was subsequently treated with open reduction and intramedullary nail fixation. CONCLUSION: When core decompression is used to treat ONFH, the location or size of the drill hole, whether a tantalum rod or bone is inserted, and partial weight-bearing of the affected limb may directly affect whether a fracture occurs after surgery. It is hoped that this case report can provide a reference for clinical orthopedic surgeons in the treatment of early ONFH.

Influence of different abutment materials on the color of implant-supported restoration: A laboratory study.

PURPOSE: To investigate the effect of different abutments and crowns on the color of implant-supported restorations. METHODS: Zirconia and lithium disilicate (e.max) disks with A2 shade were fabricated to represent two crowns. The implant abutments were untreated titanium, opaqued titanium, anodized titanium, A2 shade zirconia and white zirconia. 4.0 mm-thickness zirconia and e.max specimens were used as references respectively. The crowns were placed on tested abutments with a drop of clear glycerin between them and the color was measured using a digital spectrophotometer. CIELab values were recorded to evaluate color differences (ΔE) between tested specimens and the references. RESULTS: Titanium abutments presented higher color differences than zirconia. The ΔE values with untreated titanium were higher than those with opaqued titanium. No differences were found between untreated titanium and anodized titanium for zirconia crowns. The ΔE values of zirconia crowns showed no significant differences between shade A2 zirconia and white zirconia abutments; e.max crowns showed a significant difference. The zirconia crown ΔE values were lower than those of e.max for all titanium and A2 zirconia abutments. Lithium disilicate crowns and zirconia abutments may be more suitable for implant-supported restorations. Opaqued titanium abutment may improve color in esthetic regions when a ceramic abutment cannot be used. CLINICAL SIGNIFICANCE: Lithium disilicate crowns and zirconia abutments may be an effective method to achieve excellent color matching in esthetic regions with implant-supported restorations.

Self-powered Pt/a-Ga2O3/ITO vertical Schottky junction solar-blind photodetector with excellent detection performance.

Self-powered solar-blind photodetectors (PDs) are promising for military and civilian applications owing to convenient operation, easy preparation, and weak-light sensitivity. In the present study, the solar-blind deep-ultraviolet (DUV) photodetector based on amorphous Ga2O3 (a-Ga2O3) and with a simple vertical stack structure is proposed by applying the low-cost magnetron sputtering technology. By tuning the thickness of the amorphous Ga2O3 layer, the device exhibits excellent detection performance. Under 3 V reverse bias, the photodetector achieves a high responsivity of 671A/W, a high detectivity of 2.21 × 1015 Jones, and a fast response time of 27/11 ms. More extraordinary, with the help of the built-in electric field at the interface, the device achieves an excellent performance in detection when self-powered, with an ultrahigh responsivity of 3.69 A/W and a fast response time of 2.6/6.6 ms under 254 nm light illumination. These results demonstrate its superior performance to most of the self-powered Schottky junction UV photodetectors reported to date. Finally, the Pt/a-Ga2O3/ITO Schottky junction photodiode detector is verified as a good performer in imaging, indicating its applicability in such fields as artificial intelligence, machine vision, and solar-blind imaging.

Flavour by design: food-grade lactic acid bacteria improve the volatile aroma spectrum of oat milk, sunflower seed milk, pea milk, and faba milk towards improved flavour and sensory perception.

BACKGROUND: The global market of plant-based milk alternatives is continually growing. Flavour and taste have a key impact on consumers' selection of plant-based beverages. Unfortunately, natural plant milks have only limited acceptance. Their typically bean-like and grassy notes are perceived as "off-flavours" by consumers, while preferred fruity, buttery, and cheesy notes are missing. In this regard, fermentation of plant milk by lactic acid bacteria (LAB) appears to be an appealing option to improve aroma and taste. RESULTS: In this work, we systematically studied LAB fermentation of plant milk. For this purpose, we evaluated 15 food-approved LAB strains to ferment 4 different plant milks: oat milk (representing cereal-based milk), sunflower seed milk (representing seed-based milk), and pea and faba milk (representing legume-based milk). Using GC‒MS analysis, flavour changes during anaerobic fermentations were studied in detail. These revealed species-related and plant milk-related differences and highlighted several well-performing strains delivered a range of beneficial flavour changes. A developed data model estimated the impact of individual flavour compounds using sensory scores and predicted the overall flavour note of fermented and nonfermented samples. Selected sensory perception tests validated the model and allowed us to bridge compositional changes in the flavour profile with consumer response. CONCLUSION: Specific strain-milk combinations provided quite different flavour notes. This opens further developments towards plant-based products with improved flavour, including cheesy and buttery notes, as well as other innovative products in the future. S. thermophilus emerged as a well-performing strain that delivered preferred buttery notes in all tested plant milks. The GC‒MS-based data model was found to be helpful in predicting sensory perception, and its further refinement and application promise enhanced potential to upgrade fermentation approaches to flavour-by-design strategies.

Accuracy of immediate dental implant placement with task-autonomous robotic system and navigation system: An in vitro study.

OBJECTIVES: The aim of this study was to compare the accuracy of dental implant placement in a single tooth gap, including the postextraction site and healed site, using a task-autonomous robotic system and a dynamic navigation system. MATERIALS AND METHODS: Forty partially edentulous models requiring both immediate and conventional implant placement were randomly divided into a robotic system group and a navigation system group. The coronal, apical, and angular deviations of the implants were measured and assessed between the groups. RESULTS: The deviations in immediate implant placement were compared between the robotic system and dynamic navigation system groups, showing a mean (±SD) coronal deviation of 0.86 ± 0.36 versus 0.70 ± 0.21 mm (p = .101), a mean apical deviation of 0.77 ± 0.34 versus 0.95 ± 0.38 mm (p = .127), and a mean angular deviation of 1.94 ± 0.66° versus 3.44 ± 1.38° (p < .001). At the healed site, significantly smaller coronal deviation (0.46 ± 0.29 vs. 0.70 ± 0.30 mm, p = .005), apical deviation (0.56 ± 0.30 vs. 0.85 ± 0.25 mm, p < .001), and angular deviation (1.36 ± 0.54 vs. 1.80 ± 0.70 mm, p = .034) were found in the robotic system group than in the dynamic navigation group. CONCLUSIONS: The position in both immediate and conventional implant placement was more precise with the task-autonomous robotic system than with the dynamic navigation system. Its performance in actual clinical applications should be confirmed in further trials.

Fabricating a surgical template for guiding sinus floor elevation in the maxillary sinus septa with simultaneous implant placement: A dental technique.

The presence of sinus septa, common anatomic structures of the maxillary sinus, may increase the incidence of surgical complications during sinus floor elevation. This article introduces a digital protocol for achieving safe and precise sinus floor elevation with an individualized surgical template that combines implant placement and the lateral sinus window technique. This technique facilitates precise preplanning and preparation of the lateral osteotomy window and the implant site and reduces surgical complications, shortens surgical duration, and improves patient-related outcomes.

Endoscopic management of postoperative fistulas using purse-string suture combined with cyanoacrylate.

A 65-year-old man complained of choking and hoarseness for fifteen days, and was diagnosed with thyroid carcinoma infiltrating esophagus and trachea. Therefore, the patient underwent thyroidectomy, partial esophagectomy, and partial tracheal resection, and histopathology confirmed primary squamous cell carcinoma of the thyroid. Unfortunately, on the tenth postoperative day, an esophagogastroduodenoscopy showed a large fistula (25 mm*20 mm) in esophageal introitus, and diagnosed with tracheoesophageal fistula due to sustained choking. The patient failed to response to conservative treatment within 14 days. Consequently, endoscopic management was performed that the fistula was partly closed by purse-string suture using endoloop and hemostatic clips, then 1 ml of cyanoacrylate (Compon, China) was injected into the fistulous tract through a catheter. Interestingly, the patient's symptom was relieved after the procedure. And, esophagogastroduodenoscopy revealed healing of the fistula 14 days later.

Effects of different grafting materials on volumetric changes in the Schneiderian membrane following lateral maxillary sinus floor elevation: a preliminary study.

OBJECTIVES: To investigate the potential influence of different grafting materials on maxillary sinus membrane dimensions and ostium patency following lateral sinus floor elevation (SFE) as assessed using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 40 sinuses in 40 patients were included. Twenty sinuses were referred for SFE with deproteinized bovine bone mineral (DBBM), and the remaining 20 sinuses were grafted with calcium phosphate (CP). CBCT was performed prior to and 3 to 4 days after surgery. The dimensions of the Schneiderian membrane volume and ostium patency were evaluated, and potential relationships between volumetric changes and any associated factors were analyzed. RESULTS: The median increase in membrane-whole cavity volume ratios was 43.97% in the DBBM group and 67.58% in the CP group, demonstrating no statistically significant difference (p = 0.17). The rates of increased obstruction after SFE were 11.1% for the DBBM group versus 44.4% for the CP group (p = 0.03). The graft volume was found to be positively correlated with the postoperative membrane-whole cavity volume ratio (r = 0.79; p < 0.01) and the membrane-whole cavity volume ratio increase (r = 0.71; p < 0.01). CONCLUSIONS: The two grafting materials seem to have a similar effect on transient volumetric changes in the sinus mucosa. However, the choice of grafting material should still be made with caution since sinuses grafted using DBBM exhibited less swelling and less ostium obstruction.

Identification, characterization and functional analysis of gonadal long noncoding RNAs in a protogynous hermaphroditic teleost fish, the ricefield eel (Monopterus albus).

BACKGROUND: An increasing number of long noncoding RNAs (lncRNAs) have been found to play important roles in sex differentiation and gonad development by regulating gene expression at the epigenetic, transcriptional and posttranscriptional levels. The ricefield eel, Monopterus albus, is a protogynous hermaphroditic fish that undergoes a sequential sex change from female to male. However, the roles of lncRNA in the sex change is unclear. RESULTS: Herein, we performed RNA sequencing to analyse lncRNA expression patterns in five different stages of M. albus development to investigate the roles of lncRNAs in the sex change process. A total of 12,746 lncRNAs (1503 known lncRNAs and 11,243 new lncRNAs) and 2901 differentially expressed lncRNAs (DE-lncRNAs) were identified in the gonads. The target genes of the DE-lncRNAs included foxo1, foxm1, smad3, foxr1, camk4, ar and tgfb3, which were mainly enriched in signalling pathways related to gonadal development, such as the insulin signalling pathway, MAPK signalling pathway, and calcium signalling pathway. We selected 5 highly expressed DE-lncRNAs (LOC109952131, LOC109953466, LOC109954337, LOC109954360 and LOC109958454) for full length amplification and expression pattern verification. They were all expressed at higher levels in ovaries and intersex gonads than in testes, and exhibited specific time-dependent expression in ovarian tissue incubated with follicle-stimulating hormone (FSH) and human chorionic gonadotropin (hCG). The results of quantitative real-time PCR (qRT-PCR) analysis and a dual-luciferase assay showed that znf207, as the gene targeted by LOC109958454, was expressed in multiple tissues and gonadal developmental stages of M. albus, and its expression was also inhibited by the hormones FSH and hCG. CONCLUSIONS: These results provide new insights into the role of lncRNAs in gonad development, especially regarding natural sex changes in fish, which will be useful for enhancing our understanding of sequential hermaphroditism and sex changes in the ricefield eel (M. albus) and other teleosts.

Circular RNA expression profiles and CircSnd1-miR-135b/c-foxl2 axis analysis in gonadal differentiation of protogynous hermaphroditic ricefield eel Monopterus albus.

BACKGROUND: The expression and biological functions of circular RNAs (circRNAs) in reproductive organs have been extensively reported. However, it is still unclear whether circRNAs are involved in sex change. To this end, RNA sequencing (RNA-seq) was performed in gonads at 5 sexual stages (ovary, early intersexual stage gonad, middle intersexual stage gonad, late intersexual stage gonad, and testis) of ricefield eel, and the expression profiles and potential functions of circRNAs were studied. RESULTS: Seven hundred twenty-one circRNAs were identified, and the expression levels of 10 circRNAs were verified by quantitative real-time PCR (qRT-PCR) and found to be in accordance with the RNA-seq data, suggesting that the RNA-seq data were reliable. Then, the sequence length, category, sequence composition and the relationship between the parent genes of the circRNAs were explored. A total of 147 circRNAs were differentially expressed in the sex change process, and GO and KEGG analyses revealed that some differentially expressed (such as novel_circ_0000659, novel_circ_0004005 and novel_circ_0005865) circRNAs were closely involved in sex change. Furthermore, expression pattern analysis demonstrated that both circSnd1 and foxl2 were downregulated in the process of sex change, which was contrary to mal-miR-135b. Finally, dual-luciferase reporter assay and RNA immunoprecipitation showed that circSnd1 and foxl2 can combine with mal-miR-135b and mal-miR-135c. These data revealed that circSnd1 regulates foxl2 expression in the sex change of ricefield eel by acting as a sponge of mal-miR-135b/c. CONCLUSION: Our results are the first to demonstrate that circRNAs have potential effects on sex change in ricefield eel; and circSnd1 could regulate foxl2 expression in the sex change of ricefield eel by acting as a sponge of mal-miR-135b/c. These data will be useful for enhancing our understanding of sequential hermaphroditism and sex change in ricefield eel or other teleosts.

Co-cultures of Propionibacterium freudenreichii and Bacillus amyloliquefaciens cooperatively upgrade sunflower seed milk to high levels of vitamin B12 and multiple co-benefits.

BACKGROUND: Sunflower seeds (Helianthus annuus) display an attractive source for the rapidly increasing market of plant-based human nutrition. Of particular interest are press cakes of the seeds, cheap residuals from sunflower oil manufacturing that offer attractive sustainability and economic benefits. Admittedly, sunflower seed milk, derived therefrom, suffers from limited nutritional value, undesired flavor, and the presence of indigestible sugars. Of specific relevance is the absence of vitamin B12. This vitamin is required for development and function of the central nervous system, healthy red blood cell formation, and DNA synthesis, and displays the most important micronutrient for vegans to be aware of. Here we evaluated the power of microbes to enrich sunflower seed milk nutritionally as well as in flavor. RESULTS: Propionibacterium freudenreichii NCC 1177 showed highest vitamin B12 production in sunflower seed milk out of a range of food-grade propionibacteria. Its growth and B12 production capacity, however, were limited by a lack of accessible carbon sources and stimulants of B12 biosynthesis in the plant milk. This was overcome by co-cultivation with Bacillus amyloliquefaciens NCC 156, which supplied lactate, amino acids, and vitamin B7 for growth of NCC 1177 plus vitamins B2 and B3, potentially supporting vitamin B12 production by the Propionibacterium. After several rounds of optimization, co-fermentation of ultra-high-temperature pre-treated sunflower seed milk by the two microbes, enabled the production of 17 µg (100 g)-1 vitamin B12 within four days without any further supplementation. The fermented milk further revealed significantly enriched levels of L-lysine, the most limiting essential amino acid, vitamin B3, vitamin B6, improved protein quality and flavor, and largely eliminated indigestible sugars. CONCLUSION: The fermented sunflower seed milk, obtained by using two food-grade microbes without further supplementation, displays an attractive, clean-label product with a high level of vitamin B12 and multiple co-benefits. The secret of the successfully upgraded plant milk lies in the multifunctional cooperation of the two microbes, which were combined, based on their genetic potential and metabolic signatures found in mono-culture fermentations. This design by knowledge approach appears valuable for future development of plant-based milk products.

Influence of radiotherapy on dental implants placed in individuals before diagnosed with head and neck cancer: focus on implant-bed-specific radiation dosage.

OBJECTIVES: The influence of radiotherapy on implants placed before diagnosed as head and neck cancer (HNC) is a potentially informative but poorly explored topic. The aims of this study were to investigate the influence of implant-bed-specific radiation dose on dental implants and to evaluate the impact of these implants on radiation dosimetry. MATERIAL AND METHODS: We conducted a retrospective study with 58 irradiated patients that received dental implant restorations before undergoing radiation treatment for HNC. The radiological success rate and the peri-implant bone resorption values were measured radiographically at 1 and 3 years after radiotherapy. Patients with no implants matching tumor site and stage served as a control group (n = 58). RESULTS: The median implant-bed-specific radiation dose was 40.3 Gy, which was significantly lower than tumor bed 62.4 Gy. An implant-bed-specific radiation dose higher than 40.0 Gy showed a significantly decreased radiologic success rate when compared to lower doses. Finally, evaluation of the radiation treatment plans revealed similar radiation hot spots in the test group of patients with implants and those of the control group. CONCLUSION: Our study confirms that radiotherapy negatively worsens peri-implant bone resorption, especially for implant-bed-specific dose more than 40 Gy, and the presence of implants within the radiation fields does not alter radiation dosimetry. The findings could be clinically informative to both surgeons and radio-oncologists. CLINICAL RELEVANCE: The interactions between radiotherapy and implants placed prior to radiotherapy treatment remain a largely unexplored topic. Based on the analysis of 3-dimensional modulated radiation plans, this study demonstrates the impact of implant-bed-specific radiation dose on marginal bone resorption of implants placed pre-radiation and considers the influence of these implants on radiation dosimetry. REGISTRATION NUMBER: CHICTR2100051923: ( http://www.chictr.org.cn/usercenter.aspx ).

Expression Patterns and Gonadotropin Regulation of the TGF-ß II Receptor (Bmpr2) during Ovarian Development in the Ricefield Eel Monopterus albus.

Bmpr2 plays a central role in the regulation of reproductive development in mammals, but its role during ovarian development in fish is still unclear. To ascertain the function of bmpr2 in ovarian development in the ricefield eel, we isolated and characterized the bmpr2 cDNA sequence; the localization of Bmpr2 protein was determined by immunohistochemical staining; and the expression patterns of bmpr2 in ovarian tissue incubated with FSH and hCG in vitro were analyzed. The full-length bmpr2 cDNA was 3311 bp, with 1061 amino acids encoded. Compared to other tissues, bmpr2 was abundantly expressed in the ovary and highly expressed in the early yolk accumulation (EV) stages of the ovary. In addition, a positive signal for Bmpr2 was detected in the cytoplasm of oocytes in primary growth (PG) and EV stages. In vitro, the expression level of gdf9, the ligand of bmpr2, in the 10 ng/mL FSH treatment group was significantly higher after incubation for 4 h than after incubation for different durations. However, bmpr2 expression in the 10 ng/mL FSH treatment group at 2 h, 4 h and 10 h was significantly lower. Importantly, the expression level of bmpr2 and gdf9 in the 100 IU/mL hCG group had similar changes that were significantly decreased at 4 h and 10 h. In summary, Bmpr2 might play a pivotal role in ovarian growth in the ricefield eel, and these results provide a better understanding of the function of bmpr2 in ovarian development and the basic data for further exploration of the regulatory mechanism of gdf9 in oocyte development.

Lactic acid promotes metastatic niche formation in bone metastasis of colorectal cancer.

BACKGROUND: To investigate the effect of lactic acid (LA) on the progression of bone metastasis from colorectal cancer (CRC) and its regulatory effects on primary CD115 (+) osteoclast (OC) precursors. METHODS: The BrdU assay, Annexin-V/PI assay, TRAP staining and immunofluorescence were performed to explore the effect of LA on the proliferation, apoptosis and differentiation of OC precursors in vitro and in vivo. Flow cytometry was performed to sort primary osteoclast precursors and CD4(+) T cells and to analyze the change in the expression of target proteins in osteoclast precursors. A recruitment assay was used to test how LA and Cadhein-11 regulate the recruitment of OC precursors. RT-PCR and Western blotting were performed to analyze the changes in the mRNA and protein expression of genes related to the PI3K-AKT pathway and profibrotic genes. Safranin O-fast green staining, H&E staining and TRAP staining were performed to analyze the severity of bone resorption and accumulation of osteoclasts. RESULTS: LA promoted the expression of CXCL10 and Cadherin-11 in CD115(+) precursors through the PI3K-AKT pathway. We found that CXCL10 and Cadherin-11 were regulated by the activation of CREB and mTOR, respectively. LA-induced overexpression of CXCL10 in CD115(+) precursors indirectly promoted the differentiation of osteoclast precursors through the recruitment of CD4(+) T cells, and the crosstalk between these two cells promoted bone resorption in bone metastasis from CRC. On the other hand, Cadherin-11 mediated the adhesion between osteoclast precursors and upregulated the production of specific collagens, especially Collagen 5, which facilitated fibrotic changes in the tumor microenvironment. Blockade of the PI3K-AKT pathway efficiently prevented the progression of bone metastasis caused by lactate. CONCLUSION: LA promoted metastatic niche formation in the tumor microenvironment through the PI3K-AKT pathway. Our study provides new insight into the role of LA in the progression of bone metastasis from CRC. Video Abstract.

Genome-based selection and application of food-grade microbes for chickpea milk fermentation towards increased L-lysine content, elimination of indigestible sugars, and improved flavour.

BACKGROUND: Plant-based milk alternatives are more popular than ever, and chickpea-based milks are among the most commercially relevant products. Unfortunately, limited nutritional value because of low levels of the essential amino acid L-lysine, low digestibility and unpleasant taste are challenges that must be addressed to improve product quality and meet consumer expectations. RESULTS: Using in-silico screening and food safety classifications, 31 strains were selected as potential L-lysine producers from approximately 2,500 potential candidates. Beneficially, 30% of the isolates significantly accumulated amino acids (up to 1.4 mM) during chickpea milk fermentation, increasing the natural level by up to 43%. The best-performing strains, B. amyloliquefaciens NCC 156 and L. paracasei subsp. paracasei NCC 2511, were tested further. De novo lysine biosynthesis was demonstrated in both strains by 13C metabolic pathway analysis. Spiking small amounts of citrate into the fermentation significantly activated L-lysine biosynthesis in NCC 156 and stimulated growth. Both microbes revealed additional benefits in eliminating indigestible sugars such as stachyose and raffinose and converting off-flavour aldehydes into the corresponding alcohols and acids with fruity and sweet notes. CONCLUSIONS: B. amyloliquefaciens NCC 156 and L. paracasei subsp. paracasei NCC 2511 emerged as multi-benefit microbes for chickpea milk fermentation with strong potential for industrial processing of the plant material. Given the high number of L-lysine-producing isolates identified in silico, this concept appears promising to support strain selection for food fermentation.

Tunable electronic properties of BSe-MoS2/WS2 heterostructures for promoted light utilization.

With applications in high performance electronics, photovoltaics, and catalysis, two-dimensional (2D) transition metal dichalcogenides (TMDCs) attract extensive attention due to their extraordinary physical properties. People have focused on TMDC-based materials for years, while the low mobility greatly hinders their further application. TMDC-based heterostructures with tunable band alignment have been experimentally confirmed to be feasible for photoelectronic devices or photocatalysts. Based on the density functional theory (DFT), there are four discoveries in this work: (1) we propose two new heterostructures based on BSe and MoS2/WS2 that have quite low mismatches and intrinsic type-II alignments. (2) Even though the VBM of BSe-MoS2 are completely contributed by BSe, the heterostructure is still endowed with a lower effective mass and a better transport characteristic in comparison with pristine structures. (3) A promoted absorption ability and a better transport characteristic oppose each other and the two characteristics cannot be obtained at the same time. (4) Tension strained structures can induce promoted light absorption in the solar spectrum and the predicted efficiency of the BSe-MoS2 bilayer can be as high as ∼19.3%, when the external electric field is applied. This theoretical survey proves that BSe-MoS2/WS2 with high flexibility and tunability are potential candidates for novel electronic devices and photocatalysts.

Efficient photoelectrochemical overall water-splitting of MoS2/g-C3N4 n-n type heterojunction film.

The construction of heterojunctions has attracted considerable attention among the various strategies of water-splitting for hydrogen evolution due to their band structure advantages. In this research, we combined chemical vapor deposition and pulsed laser deposition to fabricate MoS2/g-C3N4 heterojunction films on indium-tin oxide glass substrates, and we studied the photoelectrochemical (PEC) performance. The x-ray diffraction, x-ray photoelectron spectroscopy (XPS), and scanning electron microscope characterizations suggested the successful preparation of MoS2/g-C3N4 heterojunction films. In particular, the shifts of the peak positions in the XPS spectra indicated the formation of a strong interaction between the g-C3N4 and MoS2 films. After depositing MoS2 on the g-C3N4 film, the visible-light absorption was enhanced and broadened, the electrical conductivity improved, and the intensity of the photoluminescence peak decreased. As a result, the greater generation, faster transport, and lower recombination rate of electrons and holes caused the heterojunction films to show higher PEC performance. More importantly, the obtained MoS2/g-C3N4 film was confirmed to be an n-n type heterojunction and to have a typical type-II band structure, which could indeed suppress the recombination and promote the separation, transfer, and transport of photogenerated electron-holes. Finally, the obtained MoS2/g-C3N4 film successfully achieved the overall water-splitting and the H2 evolution rate when the visible-light radiation reached 252 µmol/h.

Molecular characterization, expression, and apoptosis regulation of siva1 in protogynous hermaphrodite fish ricefield eel (Monopterus albus).

Siva1, which induces extensive apoptosis, has been well characterized. To elucidate the molecular function of Siva1 in ricefield eel, molecular characterization and phylogenetic analysis were performed, and the mRNA expression in the ovary at different developmental stages and ovary tissues exposed to H2O2 and Z-VAD-FMK in vitro were also evaluated. The results indicated that ricefield eel Siva1 was highly conserved and contains three conserved motifs, despite 83 amino acid differences upstream of the initiation codon. Phylogenetic analysis demonstrated that ricefield eel Siva1 clusters together with the Siva1 protein of the other fish, with high sequence homology with that of Lates calcarifer. Quantitative real-time polymerase chain reaction analysis showed high siva1 expression levels in the ovary and low expression levels in the liver. The higher mRNA levels of siva1 were detected in the IE and IM, and the lower siva1 mRNA levels were found in the OM, IL, and TE during gonadal development. Additionally, siva1 expression levels in the ovarian tissues were significantly increased at 1 h post incubation (hpi) with H2O2 and then significantly decreased at 2 hpi; however, siva1 expression was upregulated significantly at 4 and 8 hpi, similar to the patterns observed with caspase3, which was used as a molecular marker of apoptosis. Moreover, the siva1 mRNAs were elevated significantly than that in control groups at 1 hpi, but the expression of siva1 was down-regulated dramatically at 2, 4, and 8 hpi, which were similar with that of caspase3 expression profiles after Z-VAD-FMK incubation. What's more, Pearson's correlation coefficients showed strongly positive relationships between siva1 and caspase3. These findings suggest that Siva1 plays an important apoptosis role in gonadal development of ricefield eel.

Increased bioaffinity and anti-inflammatory activity of florfenicol nanocrystals by wet grinding method.

Context: The main objective of the current study is to improve the water solubility of florfenicol (FF) and evaluate changes in its pharmacokinetics and anti-inflammatory activity.Materials and methods: Florfenicol nanocrystals (FF-NC) were prepared by wet grinding combined with spray drying. The characterisations, pharmacokinetics, and anti-inflammatory activity of FF-NC were evaluated.Results: The particle size, polydispersity index (PDI), and zeta potential of FF-NC were 276.4 ± 19.4 nm, 0.166 ± 0.011, and -18.66 ± 5.25 mV, respectively. Compared with FF, FF-NC showed a better dissolution rate in media at different pH. Pharmacokinetic experiments showed the area under the curve (AUC0-t), maximum concentration (Cmax), and mean residence time (MRT) of FF-NC were about 4.62-fold, 2.86-fold, and 1.68-fold higher compared with FF, respectively. In vitro anti-inflammatory experiments showed that FF inhibited the secretion of tumour necrosis factor-α (TNF-α), interleukin-6 (IL-6), and synthesis of NO in a dose-dependent manner, while FF-NC showed a stronger anti-inflammatory effect than FF under the same dose.Conclusion: FF-NC are an effective way to improve the bioaffinity and anti-inflammatory effects of FF.

Brewing with malted barley or raw barley: what makes the difference in the processes?

Malted barley is the main source for fermentable sugars used by yeasts in the traditional brewing of beers but its use has been increasingly substituted by unmalted barley and other raw grain adjuncts in recent years. The incorporation of raw grains is mainly economically driven, with the added advantage of improved sustainability, by reducing reliance on the malting process and its associated cost. The use of raw grains however, especially in high proportion, requires modifications to the brewing process to accommodate the lack of malt enzymes and the differences in structural and chemical composition between malted and raw grains. This review describes the traditional malting and brewing processes for the production of full malt beer, compares the modifications to these processes, namely milling and mashing, when raw barley or other grains are used in the production of wort-a solution of fermentable extracts metabolized by yeast and converted into beer, and discusses the activity of endogenous malt enzymes and the use of commercial brewing enzyme cocktails which enable high adjunct brewing.