Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3.

The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.

Creating Atomically Iridium-Doped PdOx Nanoparticles for Efficient and Durable Methane Abatement.

The urgent environmental concern of methane abatement, attributed to its high global warming potential, necessitates the development of methane oxidation catalysts (MOC) with enhanced low-temperature activity and durability. Herein, an iridium-doped PdOx nanoparticle supported on silicalite-1 zeolite (PdIr/S-1) catalyst was synthesized and applied for methane catalytic combustion. Comprehensive characterizations confirmed the atomically dispersed nature of iridium on the surface of PdOx nanoparticles, creating an Ir4f-O-Pdcus microstructure. The atomically doped Ir transferred more electrons to adjacent oxygen atoms, modifying the electronic structure of PdOx and thus enhancing the redox ability of the PdIr/S-1 catalysts. This electronic modulation facilitated methane adsorption on the Pd site of Ir4f-O-Pdcus, reducing the energy barrier for C-H bond cleavage and thereby increasing the reaction rate for methane oxidation. Consequently, the optimized PdIr0.1/S-1 showed outstanding low-temperature activity for methane combustion (T50 = 276 °C) after aging and maintained long-term stability over 100 h under simulated exhaust conditions. Remarkably, the novel PdIr0.1/S-1 catalyst demonstrated significantly enhanced activity even after undergoing harsh hydrothermal aging at 750 °C for 16 h, significantly outperforming the conventional Pd/Al2O3 catalyst. This work provides valuable insights for designing efficient and durable MOC catalysts, addressing the critical issue of methane abatement.

Combined Experimental and Density Functional Theory Study on the Mechanism of the Selective Catalytic Reduction of NO with NH3 over Metal-Free Carbon-Based Catalysts.

Metal-free carbon-based catalysts are attracting much attention in the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR). However, the mechanism of the NH3-SCR reaction on carbon-based catalysts is still controversial, which severely limits the development of carbon-based SCR catalysts. Herein, we successfully reconstructed carbon-based catalysts through oxidation treatment with nitric acid, thereby enhancing their low-temperature activity in NH3-SCR. Combining experimental results and density functional theory (DFT) calculations, we proposed a previously unreported NH3-SCR reaction mechanism over carbon-based catalysts. We demonstrated that C-OH and C-O-C groups not only effectively activate NH3 but also remarkedly promote the decomposition of intermediate NH2NO. This study enhances the understanding of the NH3-SCR mechanism on carbon-based catalysts and paves the way to develop low-temperature metal-free SCR catalysts.

Precisely Identifying the Sources of Magnetic Particles by Hierarchical Classification-Aided Isotopic Fingerprinting.

Magnetic particles (MPs), with magnetite (Fe3O4) and maghemite (γ-Fe2O3) as the most abundant species, are ubiquitously present in the natural environment. MPs are among the most applied engineered particles and can be produced incidentally by various human activities. Identification of the sources of MPs is crucial for their risk assessment and regulation, which, however, is still an unsolved problem. Here, we report a novel approach, hierarchical classification-aided stable isotopic fingerprinting, to address this problem. We found that naturally occurring, incidental, and engineered MPs have distinct Fe and O isotopic fingerprints due to significant Fe/O isotope fractionation during their generation processes, which enables the establishment of an Fe-O isotopic library covering complex sources. Furthermore, we developed a three-level machine learning model that not only can distinguish the sources of MPs with a high precision (94.3%) but also can identify the multiple species (Fe3O4 or γ-Fe2O3) and synthetic routes of engineered MPs with a precision of 81.6%. This work represents the first reliable strategy for the precise source tracing of particles with multiple species and complex sources.

Efficient Pt/KFI zeolite catalysts for the selective catalytic reduction of NOx by hydrogen.

Aiming at purification of NOx from hydrogen internal combustion engines (HICEs), the hydrogen selective catalytic reduction (H2-SCR) reaction was investigated over a series of Pt/KFI zeolite catalysts. H2 can readily reduce NOx to N2 and N2O while O2 inhibited the deNOx efficiency by consuming the reductant H2. The Pt/KFI zeolite catalysts with Pt loading below 0.1 wt.% are optimized H2-SCR catalysts due to its suitable operation temperature window since high Pt loading favors the H2-O2 reaction which lead to the insufficient of reactants. Compared to metal Pt0 species, Ptδ+ species showed lower activation energy of H2-SCR reaction and thought to be as reasonable active sites. Further, Eley-Rideal (E-R) reaction mechanism was proposed as evidenced by the reaction orders in kinetic studies. Last, the optimized reactor was designed with hybrid Pt/KFI catalysts with various Pt loading which achieve a high NOx conversion in a wide temperature range.

Design of Ca-type todorokite catalysts with highly active for the selective reduction of NOx by NH3 at low temperatures.

Ca-type todorokite catalysts were designed and prepared by a simple redox method and applied to the selective reduction of NOx by NH3 (NH3-SCR) for the first time. Compared with the Na-type manjiroite prepared by the same method, the todorokite catalysts with different Mn/Ca ratios showed greatly improved catalytic activity for NOx reduction. Among them, Mn8Ca4 catalyst exhibited the best NH3-SCR performance, achieving 90% NOx conversion within temperature range of 70-275°C and having a high sulphur resistance. Compared to the Na-type manjiroite sample, Ca-type todorokite catalysts possessed an increased size of tunnel, resulting in a larger specific surface area. As increased the amounts of Ca doping, the Na content in Ca-type todorokite catalysts significantly decreased, providing larger amounts of Brønsted acid sites for NH3 adsorption to produce NH4+. The NH4+ species were highly active for reaction with NO + O2, playing a determining role in NH3-SCR process at low temperatures. Meanwhile, larger amounts of surface adsorbed oxygen contained over the Ca-doping samples than that over Na-type manjiroite, promoting the oxidation of NO and fast SCR processes. Over the Ca-type todorokite catalysts, furthermore, nitrates produced during the flow of NO + O2, were more active for reaction with NH3 than that over Na-type manjiroite, benefiting the occurrence of NH3-SCR process. This study provides novel insights into the design of NH3-SCR catalysts with high performance.

Identification of Direct Anchoring Sites for Monoatomic Dispersion of Precious Metals (Pt, Pd, Ag) on CeO2 Support.

Monoatomic dispersion of precious metals on the surface of CeO2 nanocrystals is a highly practical approach for dramatically reducing the usage of precious metals while exploiting the unique properties of single-atom catalysts. However, the specific atomic sites for anchoring precious metal atoms on the CeO2 support and underlying chemical mechanism remain partially unknown. Herein, we show that the terminal hydroxyls on the (100) surface are the most stable sites for anchoring Ag atoms on CeO2 , indicating that CeO2 nanocubes are the most efficient substrates to achieve monoatomic dispersion of Ag. Importantly, the newly identified chemical mechanism for single-metal-atom dispersion on CeO2 nanocubes appears to be generic and can thus be extended to other precious metals (Pt and Pd). In fact, our experiments also show that atomically dispersed Pt/Pd species exhibit morphology- and temperature-dependent CO selectivity in the catalytic CO2 hydrogenation reaction.

Mechanistic Insight into the Promotion of the Low-Temperature NH3-Selective Catalytic Reduction Activity over MnxCe1-xOy Catalysts: A Combined Experimental and Density Functional Theory Study.

CeO2 has attracted much attention in the field of selective catalytic reduction of NO with NH3 (NH3-SCR). However, poor low-temperature activity and a narrow operation window restrict the industrial application of Ce-based oxide catalysts. Herein, the low-temperature NH3-SCR activity of Ce-based oxide catalysts was dramatically improved by Mn doping, and the mechanism was elucidated at the atomic level by experimental measurements and density functional theory calculations. We found that the addition of Mn significantly promoted the formation of surface oxygen vacancies. The oxygen vacancies easily captured O2 in air and formed active oxygen species (superoxide and peroxide) on the surface. The surface active oxygen species efficiently oxidized NO into NO2 and then facilitated the "fast SCR" reaction. This study provides atomic-level insights into the promotion of the NH3-SCR activity over Mn-Ce composite oxides and is beneficial for the development of low-temperature Ce-based catalysts.

Insight into the Promotion Effect of Trace Pd Doping on the Catalytic Performance of Ag/Al2O3 for C3H6-SCR of NOx.

The mechanistic cause of the enhancement of the C3H6-SCR activity of Ag/Al2O3 by trace Pd doping and the corresponding structure-property relationship were investigated. Pd doping enhanced the water resistance of Ag/Al2O3 for C3H6-SCR by changing the reaction pathway. Under wet conditions, a series of in situ DRIFT studies indicated that the production of an active acetate intermediate on Ag/Al2O3 was suppressed during the partial oxidation of C3H6, while trace Pd doping promoted the formation of another active intermediate, an enolic species. Furthermore, a pathway for the formation of enolic species by the reaction of acrylate with hydroxyl species was proposed. DFT calculations revealed that the surface of Ag clusters was easily covered by hydroxyl in the presence of water vapor, which could inhibit the formation of acetates. Doping with Pd facilitated the activation of acrylate which might further react with hydroxyl species to form enolic species. These findings can be helpful for the future design of efficient HC-SCR catalysts.

In Situ Synthesis of Encapsulated Pd@silicalite-2 for Highly Stable Methane Catalytic Combustion.

Methane emissions from vehicles have made a significant contribution to the greenhouse effect, primarily due to its high global warming potential. Supported noble metal catalysts are widely employed in catalytic combustion of methane in vehicles, but they still face challenges such as inadequate low-temperature activity and deactivation due to sintering under harsh operating conditions. In the present work, a series of encapsulated structured catalysts with palladium nanoparticles confined in hydrophobic silicalite-2 were prepared by an in situ synthesis method. Based on various characterization methods, including XRD, HR-TEM, XPS, H2-TPR, O2-TPD, H2O-TPD, CH4-TPR, Raman, and in situ DRIFTS-MS, it was confirmed that PdOx nanoparticles were mainly encapsulated inside the silicalite-2 zeolite, which further maintained the stability of the nanoparticles under harsh conditions. Specifically, the 3Pd@S-2 sample exhibited high catalytic activity for methane oxidation even after harsh hydrothermal aging at 750 °C for 16 h and maintained long-term stability at 400 °C for 130 h during wet methane combustion. In situ Raman spectroscopy has confirmed that PdOx species act as active species for methane oxidation. During this reaction, methane reacts with PdOx to produce CO2 and H2O, while simultaneously reducing PdOx to metallic Pd species, which is further reoxidized by oxygen to replenish the PdOx catalyst.

Hydrothermal Aging Alleviates the Phosphorus Poisoning of Cu-SSZ-39 Catalysts for NH3-SCR Reaction.

As a new type of catalyst with the potential for commercial application in NOx removal from diesel engine exhausts, Cu-SSZ-39 catalysts must have excellent resistance to complex and harsh conditions. In this paper, the effects of phosphorus on Cu-SSZ-39 catalysts before and after hydrothermal aging treatment were investigated. Compared with fresh Cu-SSZ-39 catalysts, phosphorus poisoning significantly decreased the low-temperature NH3-SCR catalytic activity. However, such activity loss was alleviated by further hydrothermal aging treatment. To reveal the reason for this interesting result, a variety of characterization techniques including NMR, H2-TPR, X-ray photoelectron spectroscopy, NH3-TPD, and in situ DRIFTS measurements were employed. It was found that Cu-P species produced by phosphorus poisoning decreased the redox ability of active copper species, resulting in the observed low-temperature deactivation. After hydrothermal aging treatment, however, Cu-P species partly decomposed with the formation of active CuOx species and a release of active copper species. As a result, the low-temperature NH3-SCR catalytic activity of Cu-SSZ-39 catalysts was recovered.

Insights into SO2 Poisoning Mechanisms of Fresh and Hydrothermally Aged Cu-KFI Catalysts for NH3-SCR Reaction.

The complex poisoning of Cu-KFI catalysts by SO2 and hydrothermal aging (HTA) was investigated. The low-temperature activity of Cu-KFI catalysts was restrained by the formation of H2SO4 and then CuSO4 after sulfur poisoning. Hydrothermally aged Cu-KFI exhibited better SO2 resistance than fresh Cu-KFI since HTA significantly reduced the number of Brønsted acid sites, which were considered to be the H2SO4 storage sites. The high-temperature activity of SO2-poisoned Cu-KFI was basically unchanged compared to the fresh catalyst. However, SO2 poisoning promoted the high-temperature activity of hydrothermally aged Cu-KFI since it triggered CuOx into CuSO4 species, which was considered as an important role in the NH3-SCR reaction at high temperatures. In addition, hydrothermally aged Cu-KFI catalysts were more easily regenerated after SO2 poisoning than fresh Cu-KFI on account of the instability of CuSO4.

Insight into the Mechanism and Kinetics of the Heterogeneous Reaction between SO2 and NO2 on Diesel Black Carbon under Light Irradiation.

The heterogeneous oxidation of SO2 by NO2 has been extensively proposed as an important pathway of sulfate production during haze events in China. However, the kinetics and mechanism of oxidation of SO2 by NO2 on the surface of complex particles remain poorly understood. Here, we systematically explore the mechanism and kinetics of the reaction between SO2 and NO2 on diesel black carbon (DBC) under light irradiation. The experimental results prove that DBC photochemistry can not only significantly promote the heterogeneous reduction of NO2 to produce HONO via transferring photoinduced electrons but also indirectly promote OH radical formation. These reduction products of NO2 as well as NO2 itself greatly promote the heterogeneous oxidation of SO2 on DBC. NO2 oxidation, HONO oxidation, and the surface photo-oxidation process are proven to be three major surface oxidation pathways of SO2. The kinetics results indicate that the surface photooxidation pathway accounts for the majority of the total SO2 uptake (∼63%), followed by the HONO oxidation pathway (∼27%) and direct oxidation by NO2 (∼10%). This work highlights the significant synergistic roles of DBC, NO2, and light irradiation in enhancing the atmospheric oxidation capacity and promoting the heterogeneous formation of sulfate.

Nano-sized alumina supported palladium catalysts for methane combustion with excellent thermal stability.

Pd/Al2O3 catalysts supported on Al2O3 of different particle sizes were synthesized and applied in methane combustion. These catalysts were systematically characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), high resolution-transmission electron microscopy (HR-TEM), high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), H2-temperature-programmed reduction (H2-TPR), O2-temperature-programmed oxidation (O2-TPO), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS). The characterization results indicated that nano-sized Al2O3 enabled the uniform dispersion of palladium nanoparticles, thus contributing to the excellent catalytic performance of these nano-sized Pd/Al2O3 catalysts. Among them, Pd/Al2O3-nano-10 (Pd/Al2O3 supported by alumina with an average particle size of 10 nm) showed superior catalytic activity and stability for methane oxidation under harsh practical conditions. It maintained excellent catalytic performance for methane oxidation for 50 hr and remained stable even after harsh hydrothermal aging in 10 vol.% steam at 800°C for 16 hr. Characterization results revealed that the strong metal-support interactions and physical barriers provided by Al2O3-nano-10 suppressed the coalescence ripening of palladium species, and thus contributed to the superior sintering resistance of the Pd/Al2O3-nano-10 catalyst.

Advances in emission control of diesel vehicles in China.

Diesel vehicles have caused serious environmental problems in China. Hence, the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard. To fulfill this stringent legislation, two major technical routes, including the exhaust gas recirculation (EGR) and high-efficiency selective catalytic reduction (SCR) routes, have been developed for diesel engines. Moreover, complicated aftertreatment technologies have also been developed, including use of a diesel oxidation catalyst (DOC) for controlling carbon monoxide (CO) and hydrocarbon (HC) emissions, diesel particulate filter (DPF) for particle mass (PM) emission control, SCR for the control of NOx emission, and an ammonia slip catalyst (ASC) for the control of unreacted NH3. Due to the stringent requirements of the China VI standard, the aftertreatment system needs to be more deeply integrated with the engine system. In the future, aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.

Dynamic Change of Active Sites of Supported Vanadia Catalysts for Selective Catalytic Reduction of Nitrogen Oxides.

Selective catalytic reduction of NOx by ammonia (NH3-SCR) on V2O5/TiO2 catalysts is a widely used commercial technology in power plants and diesel vehicles due to its high elimination efficiency for NOx removal. However, the mechanistic aspects of the NH3-SCR reaction, especially the active sites on the V2O5/TiO2 catalysts, are still a puzzle. Herein, using combined operando spectroscopy and density functional theory calculations, we found that the reactivity of the Lewis acid site was significantly overestimated due to its conversion to the Brønsted acid site. Such interconversion makes it challenging to measure the intrinsic reactivity of different acid sites accurately. In contrast, the abundant V-OH Brønsted acid sites govern the overall NOx reduction rate in realistic exhaust containing water vapor. Moreover, the vanadia species cycle between V5+═O and V4+-OH during NOx reduction, and the re-oxidation of V4+ species to form V5+ is the rate-determining step.

Si/Al Ratio Determines the SCR Performance of Cu-SSZ-13 Catalysts in the Presence of NO2.

A comparative study was performed to investigate the NH3-selective catalytic reduction (SCR) reaction activity of Cu-SSZ-13 zeolites having Si/Al ratios (SARs) of 5, 18, and 30. Remarkably, the Cu-SSZ-13 zeolite catalysts exhibited completely opposite behaviors as a function of SAR under standard SCR (SSCR) and fast SCR (FSCR) reaction atmospheres. Under SSCR conditions, the NOx conversion increased as expected with the decreasing SAR. Under FSCR conditions, however, the NOx conversion decreased as the SAR decreased, contrary to expectations. In this study, based on characterization of the catalysts by X-ray diffraction, transmission electron microscopy, electron paramagnetic resonance, H2-temperature-programmed reduction, temperature-programmed desorption, and diffuse reflectance infrared Fourier transform spectroscopy, together with theoretical calculations, the authors found that the amount of Brønsted acid sites goes up while the SAR goes down, leading to an increase in the accumulation of NH4NO3 under FSCR reaction conditions. Moreover, the accumulated NH4NO3 is of greater stability for those low SAR Cu-SSZ-13 catalysts. These two reasons cause the FSCR performance of Cu-SSZ-13 to decrease with a decrease in SAR. As a result, the NO2 effect on SCR activity changes from promotion to inhibition as the SAR decreases.

Influence of NOx on the activity of Pd/θ-Al2O3 catalyst for methane oxidation: Alleviation of transient deactivation.

Alumina supported Pd catalyst (Pd/Al2O3) is active for complete oxidation of methane, while often suffers transient deactivation during the cold down process. Herein, heating and cooling cycle tests between 200 and 900°C and isothermal experiments at 650°C were conducted to investigate the influence of NOx on transient deactivation of Pd/θ-Al2O3 catalyst during the methane oxidation. It was found that the co-fed of NO alleviated transient deactivation in the cooling ramp from 800 to 500°C, which was resulted from the in situ formation of NO2 during the process of methane oxidation. Over the Pd/θ-Al2O3, thermogravimetric analysis and O2 temperature programmed oxidation measurements confirmed that transient deactivation was due to the decomposition of PdO particles and the hysteresis of Pd reoxidation, while the metal Pd entities were less active for methane oxidation than the PdO ones. CO pulse chemisorption and scanning transmission electron microscopy characterizations rule out the NO2 effect on Pd size change. Powder X-ray diffraction and X-ray photoelectron spectroscopy characterizations were used to obtain palladium status of Pd/θ-Al2O3 before and after reactions, indicating that in lean conditions at 650°C, the presence of NO2 increases the content of active PdO on the catalyst surface, thus benefits methane oxidation. Homogeneous reaction between CH4, O2, and NOx may be partially responsible for the alleviation above 650°C. The interesting research of alleviation in transient deactivation by NOx, the components co-existing in exhausts, are of great significance for the application.

Adsorption-Induced Active Vanadium Species Facilitate Excellent Performance in Low-Temperature Catalytic NOx Abatement.

Vanadia-based catalysts have been widely used for catalyzing various reactions, including their long-standing application in the deNOx process. It has been commonly considered that various vanadium species dispersed on supports with a large surface area act as the catalytically active sites. However, the role of crystalline V2O5 in selective catalytic reduction of NOx with NH3 (NH3-SCR) remains unclear. In this study, a catalyst with low vanadia loading was synthesized, in which crystalline V2O5 was deposited on a TiO2 support that had been pretreated at a high temperature. Surprisingly, the catalyst, which had a large amount of crystalline V2O5, showed excellent low-temperature NH3-SCR activity. For the first time, crystalline V2O5 on low-vanadium-loading catalysts was found to be transformed to polymeric vanadyl species by the adsorption of NH3. The generated active polymeric vanadyl species played a crucial role in NH3-SCR, leading to remarkably enhanced catalytic performance at low temperatures. This new finding provides a fundamental understanding of the metal oxide-catalyzed chemical reaction and has important implications for the development and commercial applications of NH3-SCR catalysts.

Synergistic Effects of Multicomponents Produce Outstanding Soot Oxidation Activity in a Cs/Co/MnOx Catalyst.

The control of soot emission from diesel vehicles is of extraordinary importance to the environment, and catalytic removal of soot is a highly effective and clean method. Here, we report a novel, non-noble metal catalyst for application in the catalytic combustion of soot with superb activity and resistance to H2O and SO2. MnOx oxide was prepared via a hydrothermal method, and then, Cs and Co were loaded on MnOx by impregnation. The 5%Cs/1%Co/MnOx catalyst displayed excellent catalytic activity with values of T10 (332 °C), T50 (371 °C), and T90 (415 °C) under loose contact. The as-prepared catalysts were investigated by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), H2 temperature-programmed reduction (TPR), O2 temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS). The results suggest that, after the introduction of Cs and Co into the MnOx oxide, more NO2 molecules take part in soot oxidation, exhibiting higher NO2 utilization efficiency; this is due to the synergistic effects of multiple components (Cs, Co, and Mn) promoting the generation of more surface-active oxygen and then accelerating the reaction between NO2 and soot. This study provides significant insights into the development of high-efficiency catalysts for soot oxidation, and the developed 5%Cs/1%Co/MnOx catalyst is a promising candidate for application in diesel particulate filters.