Tuning Iron Active Sites of FeOOH via Al3+ and Heteroatom Doping-Induced Asymmetric Oxygen Vacancy Electronic Structure for Efficient Alkaline Water Splitting.

Oxygen evolution reaction is the essential anodic reaction for water splitting. Designing tunable electronic structures to overcome its slow kinetics is an effective strategy. Herein, the molecular ammonium iron sulfate dodecahydrate is employed as the precursor to synthesize the C, N, S triatomic co-doped Fe(Al)OOH on Ni foam (C,N,S-Fe(Al)OOH-NF) with asymmetric electronic structure. Both in situ oxygen vacancies and their special electronic configuration enable the electron transfer between the d-p orbitals and get the increase of OER activity. Density functional theory calculation further indicates the effect of electronic structure on catalytic activity and stability at the oxygen vacancies. In alkaline solution, the catalyst C,N,S-Fe(Al)OOH-NF shows good catalytic activity and stability for water splitting. For OER, the overpotential of 10 mA cm-2 is 264 mV, the tafel slope is 46.4 mV dec-1, the HER overpotential of 10 mA cm-2 is 188 mV, the tafel slope is 59.3 mV dec-1. The stability of the catalyst can maintain ≈100 h. This work has extraordinary implications for understanding the mechanistic relationship between electronic structure and catalytic activity for designing friendly metal (oxy)hydroxide catalysts.

Continuous Ultrathin Zwitterionic Covalent Organic Framework Membrane Via Surface-Initiated Polymerization Toward Superior Water Retention.

Efficient construction of proton transport channels in proton exchange membranes maintaining conductivity under varied humidity is critical for the development of fuel cells. Covalent organic frameworks (COFs) hold great potential in providing precise and fast ion transport channels. However, the preparation of continuous free-standing COF membranes retaining their inherent structural advantages to realize excellent proton conduction performance is a major challenge. Herein, a zwitterionic COF material bearing positive ammonium ions and negative sulphonic acid ions is developed. Free-standing COF membrane with adjustable thickness is constructed via surface-initiated polymerization of COF monomers. The porosity, continuity, and stability of the membranes are demonstrated via the transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) characterization. The rigidity of the COF structure avoids swelling in aqueous solution, which improves the chemical stability of the proton exchange membranes and improves the performance stability. In the higher humidity range (50-90%), the prepared zwitterionic COF membrane exhibits superior capability in retaining the conductivity compared to COF membrane merely bearing sulphonic acid group. The established strategy shows the potential for the application of zwitterionic COF in the proton exchange membrane fuel cells.

Synthesis of {AlMo14O44}-Based Supramolecular Structures with High Proton Conductivity.

Polyoxometalates (POMs) are esteemed for their remarkable stability and exceptionally high proton conductivity, rendering them ripe for extensive exploration owing to their research significance. Herein, we synthesized two bimolybdenum-capped {AlMoVI8MoV6O44} cluster-based coordination polymers through a solvothermal method. Single-crystal X-ray diffraction analysis elucidates that H[(H2bimb)3(AlMoVI8MoV6O44)] [bimb = 1,4-bis(imidazole-1-ylmethyl)benzene, compound 1] is the POMs-organic supramolecular structure. The introduction of zinc ions into the reaction environment facilitated the connection of initially dispersed ligands, which yielded the well-ordered structure H3[Zn2(bimb)4(AlMoVI8MoV6O44)]·4H2O (compound 2) with a layer distance of 11.8 Å. The proton conductivities (σ) of two compounds were measured under conditions of 85 °C and 98% relative humidity (RH), resulting in values of 3.89 × 10-2 and 4.76 × 10-2 S·cm-1, respectively. This study presents a novel approach to fabricating POMs as proton conductors through structural design and manufacturing adjustments.

Ultrathin Free-Standing Porous Aromatic Framework Membranes for Efficient Anion Transport.

Porous aromatic frameworks (PAFs) show promising potential in anionic conduction due to their high stability and customizable functionality. However, the insolubility of most PAFs presents a significant challenge in their processing into membranes and subsequent applications. In this study, continuous PAF membranes with adjustable thickness were successfully created using liquid-solid interfacial polymerization. The rigid backbone and the stable C-C coupling endow PAF membrane with superior chemical and dimensional stabilities over most conventional polymer membranes. Different quaternary ammonium functionalities were anchored to the backbone through flexible alkyl chains with tunable length. The optimal PAF membrane exhibited an OH- conductivity of 356.6 mS ⋅ cm-1 at 80 °C and 98 % relative humidity. Additionally, the PAF membrane exhibited outstanding alkaline stability, retaining 95 % of its OH- conductivity after 1000 hours in 1 M NaOH. To the best of our knowledge, this is the first application of PAF materials in anion exchange membranes, achieving the highest OH- conductivity and exceptional chemical/dimensional stability. This work provides the possibility for the potential of PAF materials in anionic conductive membranes.

Multi-Template-Guided Synthesis of High-Dimensional Molecular Assemblies for Humidity Gradient-Based Power Generators.

Systematically orchestrating fundamental building blocks into intricate high-dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi-template-guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi-dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4- {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8- {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12- {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16- {P8Mo48}). Among these structures, the hydrophilic-hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient-based power generators (HGPGs). The Te4Mo24-PVDF-based HGPG (PVDF=Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open-circuit voltage of 0.51 V and a current density of 77.8 nA cm-2 at room temperature and 90 % relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

Controllable Transition Metal-Directed Assembly of [Mo2O2S2]2+ Building Blocks into Smart Molecular Humidity-Responsive Actuators.

Smart molecular actuators have become a cutting-edge theme due to their ability to convert chemical energy into mechanical energy under external stimulations. However, realizing actuation at the molecular level and elucidating the mechanisms for actuating still remain challenging. Herein, we design and fabricate a novel nanoscaled polyoxometalate-based humidity-responsive molecular actuator {Bi8Mo48} through the assembly of [Mo2O2S2]2+ units, transition metals, and flexible phosphonic acid ligands. {Bi8Mo48} exhibits a semi-flexible cage-like architecture with oxygen-rich surfaces and highly negative charges 72-. The nanoscaled molecular actuator shows reversible expansion and contraction behavior under humidity variations due to lattice expansion and contraction induced by hydrogen bonding and solvation interactions between {Bi8Mo48} and water molecules. Molecular dynamics simulation was further employed to study these processes, which provides a fundamental understanding for the mechanism of humidity actuation at the molecular level.

Synthesis of Phosphovanadate-Based Porous Inorganic Frameworks with High Proton Conductivity.

Materials with high proton conductivity have attracted significant attention for their wide-ranging applications in proton exchange membrane fuel cells. However, the design of new and efficient porous proton-conducting materials remains a challenging task. The structure-controllable and highly stable metal phosphates can be synthesized into layer or frame networks to provide proton transport capabilities. Herein, we have successfully synthesized three isomorphic metal phosphovanadates, namely, H2(C2H10N2)2[MII(H2O)2(VIVO)8(OH)4(PO4)4(HPO4)4] (C2H8N2 = 1,2-ethylenediamine; M = Co, Ni, and Cu), by the hydrothermal method employing ethylenediamine as a template. These pure inorganic open frameworks exhibit a cavity width ranging from 6.4 to 7.5 Å. Remarkably, the proton conductivity of compounds 1-3 can reach 1 × 10-2 S·cm-1 at 85 °C and 97% relative humidity (RH), and they can remain stable at high temperatures as well as long-term stability. This work provides a novel strategy for the development and design of porous proton-conducting materials.

Constructing Oxygen Vacancies via Engineering Heterostructured Fe3 C/Fe3 O4 Catalysts for Electrochemical Ammonia Synthesis.

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing pathway to convert N2 into NH3 . However, significant kinetic barriers of the NRR at low temperatures in desirable aqueous electrolytes remain a grand challenge due to the inert N≡N bond of the N2 molecule. Herein, we propose a unique strategy for in situ oxygen vacancy construction to address the significant trade-off between N2 adsorption and NH3 desorption by building a hollow shell structured Fe3 C/Fe3 O4 heterojunction coated with carbon frameworks (Fe3 C/Fe3 O4 @C). In the heterostructure, the Fe3 C triggers the oxygen vacancies of the Fe3 O4 component, which are likely active sites for the NRR. The design could optimize the adsorption strength of the N2 and Nx Hy intermediates, thus boosting the catalytic activity for the NRR. This work highlights the significance of the interaction between defect and interface engineering for regulating electrocatalytic properties of heterostructured catalysts for the challenging NRR. It could motivate an in-depth exploration to advance N2 reduction to ammonia.

Designed Tetranuclear Iron-oxo Clusters with Redox Activity for High-Performance Lithium Storage.

Polyoxometalates (POMs) are considered as promising catalysts with unique redox activity at the molecular level for energy storage. However, eco-friendly iron-oxo clusters with special metal coordination structures have rarely been reported for Li-ion storage. Herein, three novel redox-active tetranuclear iron-oxo clusters have been synthesized using the solvothermal method with different ratios of Fe3+ and SO4 2- . Further, they can serve as anode materials for Li-ion batteries. Among them, cluster H6 [Fe4 O2 (H2 O)2 (SO4 )7 ]⋅H2 O, the stable structure extended by SO4 2- with a unique 1D pore, displays a specific discharge capacity of 1784 mAh g-1 at 0.2 C and good cycle performance (at 0.2 C and 4 C). This is the first instance of inorganic iron-oxo clusters being used for Li-ion storage. Our findings present a new molecular model system with a well-defined structure and offer new design concepts for the practical application of studying the multi-electron redox activity of iron-oxo clusters.

Space-Confined Nucleation of Semimetal-Oxo Clusters within a [H7P8W48O184]33- Macrocycle: Synthesis, Structure, and Enhanced Proton Conductivity.

Spatially confined assembly of semimetallic oxyanions (AsO33- and SbO33-) within a [H7P8W48O184]33- (P8W48) macrocycle has afforded three nanoscale polyanions, [{AsIII5O4(OH)3}2(P8W48O184)]32- (As10), [(SbIIIOH)4(P8W48O184)]32- (Sb4), and [(SbIIIOH)8(P8W48O184)]24- (Sb8), which were crystallized as the hydrated mixed-cation salts (Me2NH2)13K7Na2Li10[{AsIII5O4(OH)3}2(P8W48O184)]·32H2O (DMA-KNaLi-As10), K20Li12[(SbIIIOH)4(P8W48O184)]·52H2O (KLi-Sb4), and (Me2NH2)8K6Na5Li5[(SbIIIOH)8(P8W48O184)]·65H2O (DMA-KNaLi-Sb8), respectively. A multitude of solid- and solution-state physicochemical techniques were employed to systematically characterize the structure and composition of the as-made compounds. The polyanion of As10 represents the first example of a semimetal-oxo cluster-substituted P8W48 and accommodates the largest AsIII-oxo cluster in polyoxometalates (POMs) reported to date. The number of incorporated SbO33- groups in Sb4 and Sb8 could be customized by a simple variation of SbIII-containing precursors. Encapsulation of semimetallic oxyanions inside P8W48 sets out a valid strategy not only for the development of host-guest assemblies in POM chemistry but also for their function expansion in emerging applications such as proton-conducting materials, for which DMA-KNaLi-As10 showcases an outstanding conductivity of 1.2 × 10-2 S cm-1 at 85 °C and 70% RH.

Molecular Iron Oxide Clusters Boost the Oxygen Reduction Reaction of Platinum Electrocatalysts at Near-Neutral pH.

The oxygen reduction reaction (ORR) is a key energy conversion process, which is critical for the efficient operation of fuel cells and metal-air batteries. Here, we report the significant enhancement of the ORR-performance of commercial platinum-on-carbon electrocatalysts when operated in aqueous electrolyte solutions (pH 5.6), containing the polyoxoanion [Fe28 (µ3 -O)8 (L-(-)-tart)16 (CH3 COO)24 ]20- . Mechanistic studies provide initial insights into the performance-improving role of the iron oxide cluster during ORR. Technological deployment of the system is demonstrated by incorporation into a direct formate microfluidic fuel cell (DFMFC), where major performance increases are observed when compared with reference electrolytes. The study provides the first examples of iron oxide clusters in electrochemical energy conversion and storage.

Surface-Mediated Construction of an Ultrathin Free-Standing Covalent Organic Framework Membrane for Efficient Proton Conduction.

As a new class of crystalline porous organic materials, covalent organic frameworks (COFs) have attracted considerable attention for proton conduction owing to their regular channels and tailored functionality. However, most COFs are insoluble and unprocessable, which makes membrane preparation for practical use a challenge. In this study, we used surface-initiated condensation polymerization of a trialdehyde and a phenylenediamine for the synthesis of sulfonic COF (SCOF) coatings. The COF layer thickness could be finely tuned from 10 to 100 nm by controlling the polymerization time. Moreover, free-standing COF membranes were obtained by sacrificing the bridging layer without any decomposition of the COF structure. Benefiting from the abundant sulfonic acid groups in the COF channels, the proton conductivity of the SCOF membrane reached 0.54 S cm-1 at 80 °C in pure water. To our knowledge, this is one of the highest values for a pristine COF membrane in the absence of additional additives.

Precise Molecular-Level Modification of Nafion with Bismuth Oxide Clusters for High-performance Proton-Exchange Membranes.

Fabricating proton exchange membranes (PEMs) with high ionic conductivity and ideal mechanical robustness through regulation of the membrane microstructures achieved by molecular-level hybridization remains essential but challenging for the further development of high-performance PEM fuel cells. In this work, by precisely hybridizing nano-scaled bismuth oxide clusters into Nafion, we have fabricated the high-performance hybrid membrane, Nafion-Bi12 -3 %, which showed a proton conductivity of 386 mS cm-1 at 80 °C in aqueous solution with low methanol permeability, and conserved the ideal mechanical and chemical stabilities as PEMs. Moreover, molecular dynamics (MD) simulation was employed to clarify the structural properties and the assembly mechanisms of the hybrid membrane on the molecular level. The maximum current density and power density of Nafion-Bi12 -3 % for direct methanol fuel cells reached to 432.7 mA cm-2 and 110.2 mW cm-2 , respectively. This work provides new insights into the design of versatile functional polymer electrolyte membranes through polyoxometalate hybridization.

Cationic Covalent Organic Frameworks: A Simple Platform of Anionic Exchange for Porosity Tuning and Proton Conduction.

Mimicking proton conduction mechanism of Nafion to construct novel proton-conducting materials with low cost and high proton conductivity is of wide interest. Herein, we have designed and synthesized a cationic covalent organic framework with high thermal and chemical stability by combining a cationic monomer, ethidium bromide (EB) (3,8-diamino-5-ethyl-6-phenylphenanthridinium bromide), with 1,3,5-triformylphloroglucinol (TFP) in Schiff base reactions. This is the first time that the stable cationic crystalline frameworks allowed for the fabrication of a series of charged COFs (EB-COF:X, X = F, Cl, Br, I) through ion exchange processes. Exchange of the extra framework ions can finely modulate the COFs' porosity and pore sizes at nanoscale. More importantly, by introducing PW12O40(3-) into this porous cationic framework, we can greatly enhance the proton conductivity of ionic COF-based material. To the best of our knowledge, EB-COF:PW12 shows the best proton conductivity at room temperature among ever reported porous organic materials.

A polyoxometalate-encapsulating cationic metal-organic framework as a heterogeneous catalyst for desulfurization.

A new cationic triazole-based metal-organic framework encapsulating Keggin-type polyoxometalates, with the molecular formula [Co(BBPTZ)3][HPMo12O40]⋅24 H2O [compound 1; BBPTZ = 4,4'-bis(1,2,4-triazol-1-ylmethyl)biphenyl] is hydrothermally synthesized and characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction, and single-crystal X-ray diffraction. The structure of compound 1 contains a non-interpenetrated 3D CdSO4 (cds)-type framework with two types of channels that are interconnected with each other; straight channels that are occupied by the Keggin-type POM anions, and wavelike channels that contain lattice water molecules. The catalytic activity of compound 1 in the oxidative desulfurization reaction indicates that it is not only an effective and size-selective heterogeneous catalyst, but it also exhibits distinct structural stability in the catalytic reaction system.

Multifunctional Polyoxometalates-Based Ionohydrogels toward Flexible Electronics.

Multifunctional flexible electronics present tremendous opportunities in the rapidly evolving digital age. One potential avenue to realize this goal is the integration of polyoxometalates (POMs) and ionic liquid-based gels (ILGs), but the challenge of macrophase separation due to poor compatibility, especially caused by repulsion between like-charged units, poses a significant hurdle. Herein, the possibilities of producing diverse and homogenous POMs-containing ionohydrogels by nanoconfining POMs and ionic liquids (ILs) within an elastomer-like polyzwitterionic hydrogel using a simple one-step random copolymerization method, are expanded vastly. The incorporation of polyzwitterions provides a nanoconfined microenvironment and effectively modulates excessive electrostatic interactions in POMs/ILs/H2O blending system, facilitating a phase transition from macrophase separation to a submillimeter scale worm-like microphase-separation system. Moreover, combining POMs-reinforced ionohydrogels with a developed integrated self-powered sensing system utilizing strain sensors and Zn-ion hybrid supercapacitors has enabled efficient energy storage and detection of external strain changes with high precision. This work not only provides guidelines for manipulating morphology within phase-separation gelation systems, but also paves the way for developing versatile POMs-based ionohydrogels for state-of-the-art smart flexible electronics.

The assembly of [Mo2O2S2]2+ based on polydentate phosphonate templates and their proton conductivity.

The assembly of [Mo2O2S2]2+ units depends on the configuration of polydentate phosphonic acid templates, leading to novel topologies with enhanced nuclearity and complexity. The variation of the assembled structures also gives rise to distinct proton-conducting properties.

Complex phase transitions and phase engineering in the aqueous solution of an isopolyoxometalate cluster.

Inorganic salts usually demonstrate simple phasal behaviors in dilute aqueous solution mainly involving soluble (homogeneous) and insoluble (macrophase separation) scenarios. Herein, we report the discovery of complex phase behavior involving multiple phase transitions of clear solution - macrophase separation - gelation - solution - macrophase separation in the dilute aqueous solutions of a structurally well-defined molecular cluster [Mo7O24]6- macroanions with the continuous addition of Fe3+. No chemical reaction was involved. The transitions are closely related to the strong electrostatic interaction between [Mo7O24]6- and their Fe3+ counterions, the counterion-mediated attraction and the consequent charge inversion, leading to the formation of linear/branched supramolecular structures, as confirmed by experimental results and molecular dynamics simulations. The rich phase behavior demonstrated by the inorganic cluster [Mo7O24]6- expands our understanding of nanoscale ions in solution.

N, F Codoped FeOOH Nanosheets with Intercalated Carbonate Anions Rich in Oxygen Defects for Enhanced Alkaline Electrocatalytic Water Splitting.

Alkaline water splitting is a highly efficient and clean technology for hydrogen energy generation. However, in alkaline solutions, most catalysts suffer from extreme instability. Herein, a cross-nanostructured N, F, and CO32- codoped iron oxyhydroxide composite (N,F-FeO(OH)-CO3-NF) rich in oxygen defects is designed for water splitting in the alkaline solution. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations show that the introduction of F and CO32- can induce electron redistribution around the active center Fe, accelerate the four-electron transfer process, and optimize the d-band center, thereby improving the efficiency and stability of HER and OER. In a 1 M KOH solution, N,F-FeO(OH)-CO3-NF only needs the overpotential of 248 mV for OER and the overpotential of 199 mV for HER to reach the current density of 10 mA·cm-2. Meanwhile, it can reach 100 mA·cm-2 current density at 1.55 V vs RHE and maintains a current density of 10 mA·cm-2 for 120 h in a two-electrode electrolytic water device. Compared with bulk hydroxides, the heteroatom and anion codoped composite hydroxides are more stable and have dual functions in the electrolyte solution. This is of great significance for designing a new stable water-splitting electrocatalyst.

Syntheses of cucurbit[6]uril-based metal-organic rotaxane networks by the anion regulation strategy and their proton conduction properties.

Two new cucurbit[6]uril (CB[6])-based metal-organic rotaxane networks (MORNs) were successfully obtained by tuning the coordination sphere of metal copper clusters. Compounds 1 and 2 exhibited relatively high proton conductivity at 85 °C and 97% relative humidity (RH), providing great promise for fuel cell electrolyte materials.