Chemical Etching, Thermally Driven Combination Strategy to Fabricate Superhydrophobic Fe-Based Amorphous Coatings with Excellent Anticorrosion Property: Based on Hydroxylation Effect.

Fe-based amorphous coatings are ideal materials for surface protection due to their outstanding mechanical properties and corrosion resistance. However, coating defects are inevitably formed during the preparation of coatings by thermal spray technology, which seriously affects the corrosion performance. Inspired by bionics, conceiving superhydrophobic surfaces with liquid barrier properties has become a new idea for the corrosion protection of metal surfaces. In this work, based on surface hydroxylation, we designed a superhydrophobic Fe-based amorphous coating with corrosion resistance by chemical etching combined with a thermally driven preparation strategy. The obtained superhydrophobic coatings exhibit liquid repellency (contact angle >150°) and excellent corrosion resistance (corrosion current density and passive current density reduced by 3 orders of magnitude). The results revealed that the superhydrophobic behavior stems from the construction of hydroxyl-induced surface micro-/nanomultilevel aggregates (cluster structures). The hydrophobic agent layer deposited on the surface of cluster aggregates and the nanoparticle elements that constitute the clusters dominate the corrosion resistance of the coating. This work provides an effective guide to the design of high-corrosion-resistant Fe-based amorphous alloy coatings and promotes their engineering applications.

Chemical Synthesis of Proteins Using an o-Nitrobenzyl Group as a Robust Temporary Protective Group for N-Terminal Cysteine Protection.

We report here a robust and practical strategy for chemical protein synthesis using an o-nitrobenzyl group as a temporary protective group for an N-terminal cysteine residue of intermediate hydrazide fragments. By reinvestigating the photoremoval of an o-nitrobenzyl group, we establish a robust and reliable strategy for its quantitative photodeprotection. The o-nitrobenzyl group is completely stable to oxidative NaNO2 treatment and has been applied to the convergent chemical synthesis of programmed death ligand 1 fragment, providing a practical avenue for hydrazide-based native chemical ligation.

Spiral molecules with antimalarial activities: A review.

Malaria is a prevalent fatal disease in tropical and subtropical regions around the world. Combinations of Artemisinin, folate antagonists, quinolines, and antibiotics are major choices in clinics. Currently, wide range of parasite's resistance necessitates the search for chemical compounds with new structures and novel antimalarial targets. The literature review was performed covering the relevant literatures published from 1966 to 2021. On the basis of structural classification (spiro-peroxides, spiroindolones, spirocyclohexadienones et al.), different types of molecules were summarized with resources, anti-malarial activities, structure-activity relationship, target introductions, resistance, development progress, and synthetic strategies, for the purpose of providing comprehensive information for developing antimalarial drugs to overcome drug resistance and highlighting the importance of the spiral structure in medicinal chemistry.

Structure and function relationship of murine insulin-like peptide 5 (INSL5): free C-terminus is essential for RXFP4 receptor binding and activation.

Insulin-like peptide 5 (INSL5) is a member of insulin/relaxin superfamily of peptides. It has recently been identified as the cognate ligand for the G-protein-coupled receptor, RXFP4. Although the complete physiological role of this naturally occurring peptide is still under investigation, there is evidence that it acts to both stimulate appetite and activate colon motility. This suggests that both agonists and antagonists of the peptide may have potential therapeutic applications. To further investigate the physiological role of this peptide and because of the ready availability of the mouse as an experimental animal, the preparation of mouse INSL5 was undertaken. Because of its complex structure and the intractable nature of the two constituent chains, different solid phase synthesis strategies were investigated, including the use of a temporary B-chain solubilizing tag. Unfortunately, none provided significantly improved yield of purified mouse INSL5 which reflects the complexity of this peptide. In addition to the native peptide, two mouse INSL5 analogues were also prepared. One had its two chains as C-terminal amides, and the other contained a europium chelate monolabel for use in RXFP4 receptor assays. It was found that the INSL5 amide was substantially less potent than the native acid form. A similar observation was made for the human peptide acid and amide, highlighting the necessity for free C-terminal carboxylates for function. Two additional human INSL5 analogues were prepared to further investigate the necessity of a free C-terminal. The results together provide a first insight into the mechanism whereby INSL5 binds to and activates RXFP4.

Effect of helix-promoting strategies on the biological activity of novel analogues of the B-chain of INSL3.

Insulin-like 3 (INSL3) is a novel circulating peptide hormone that is produced by testicular Leydig cells and ovarian thecal and luteal cells. In males, INSL3 is responsible for testicular descent during foetal life and suppresses germ cell apoptosis in adult males, whereas in females, it causes oocyte maturation. Antagonists of INSL3 thus have significant potential clinical application as contraceptives in both males and females. Previous work has shown that the INSL3 receptor binding region is largely confined to the B-chain central alpha-helix of the hormone and a conformationally constrained analogue of this has modest receptor binding and INSL3 antagonist activity. In the present study, we have employed and evaluated several approaches for increasing the alpha-helicity of this peptide in order to better present the key receptor binding residues and increase its affinity for the receptor. Analogues of INSL3 with higher alpha-helicity generally had higher receptor binding affinity although other structural considerations limit their effectiveness.

Use of a temporary "solubilizing" peptide tag for the Fmoc solid-phase synthesis of human insulin glargine via use of regioselective disulfide bond formation.

Solid-phase peptide synthesis has been refined to a stage where efficient preparation of long and complex peptides is now achievable. However, the postsynthesis handling of poorly soluble peptides often remains a significant hindrance to their purification and further use. Several synthetic schemes have been developed for the preparation of such peptides containing modifications to aid their solubility. However, these require the use of complex chemistry or yield non-native sequences. We describe a simple approach based on the use of penta-lysine "tags" that are linked to the C-terminus of the peptide of interest via a base-labile linker. After ready purification of the now freely solubilized peptide, the "tag" is removed by simple, brief base treatment giving the native sequence in much higher overall yield. The applicability of the method was demonstrated by the novel preparation of insulin glargine via solid-phase synthesis of each of the two chains--including the notoriously poorly soluble A-chain--followed by their combination in solution via regioselective disulfide bond formation. At the conclusion of the chain combination, the solubilizing peptide tag was removed from the A-chain to provide synthetic human glargine in nearly 10% overall yield. This approach should facilitate the development of new insulin analogues as well as be widely applicable to the improved purification and acquisition of otherwise poorly soluble synthetic peptides.

Solid phase synthesis and structural analysis of novel A-chain dicarba analogs of human relaxin-3 (INSL7) that exhibit full biological activity.

Replacement of disulfide bonds with non-reducible isosteres can be a useful means of increasing the in vivo stability of a protein. We describe the replacement of the A-chain intramolecular disulfide bond of human relaxin-3 (H3 relaxin, INSL7), an insulin-like peptide that has potential applications in the treatment of stress and obesity, with the physiologically stable dicarba bond. Solid phase peptide synthesis was used to prepare an A-chain analogue in which the two cysteine residues that form the intramolecular bond were replaced with allylglycine. On-resin microwave-mediated ring closing metathesis was then employed to generate the dicarba bridge. Subsequent cleavage of the peptide from the solid support, purification of two isomers and their combination with the B-chain via two intermolecular disulfide bonds, then furnished two isomers of dicarba-H3 relaxin. These were characterized by CD spectroscopy, which suggested a structural similarity to the native peptide. Additional analysis by solution NMR spectroscopy also identified the likely cis/trans form of the analogs. Both peptides demonstrated binding affinities that were equivalent to native H3 relaxin on RXFP1 and RXFP3 expressing cells. However, although the cAMP activity of the analogs on RXFP3 expressing cells was similar to the native peptide, the potency on RXFP1 expressing cells was slightly lower. The data confirmed the use of a dicarba bond as a useful isosteric replacement of the disulfide bond.

Synthesis, conformation, and activity of human insulin-like peptide 5 (INSL5).

Insulin-like peptide 5 (INSL5) was first identified through searches of the expressed sequence tags (EST) databases. Primary sequence analysis showed it to be a prepropeptide that was predicted to be processed in vivo to yield a two-chain sequence (A and B) that contained the insulin-like disulfide cross-links. The high affinity interaction between INSL5 and the receptor RXFP4 (GPCR142) coupled with their apparent coevolution and partially overlapping tissue expression patterns strongly suggest that INSL5 is an endogenous ligand for RXFP4. Given that the primary function of the INSL5-RXFP4 pair remains unknown, an effective means of producing sufficient quantities of this peptide and its analogues is needed to systematically investigate its structural and biological properties. A combination of solid-phase peptide synthesis methods together with regioselective disulfide bond formation were used to obtain INSL5. Both chains were unusually resistant to standard synthesis protocols and required highly optimized conditions for their acquisition. In particular, the use of a strong tertiary amidine, DBU, as N(alpha)-deprotection base was required for the successful assembly of the B chain; this highlights the need to consider incomplete deprotection rather than acylation as a cause of failed synthesis. Following sequential disulfide bond formation and chain combination, the resulting synthetic INSL5, which was obtained in good overall yield, was shown to possess a similar secondary structure to human relaxin-3 (H3 relaxin). The peptide was able to inhibit cAMP activity in SK-N-MC cells that expressed the human RXFP4 receptor with a similar activity to H3 relaxin. In contrast, it had no activity on the human RXFP3 receptor. Synthetic INSL5 demonstrates equivalent activity to the recombinant-derived peptide, and will be an important tool for the determination of its biological function.

Solid-phase synthesis of europium-labeled human INSL3 as a novel probe for the study of ligand-receptor interactions.

An efficient solid-phase synthesis protocol has been developed which, together with regioselective sequential formation of the three disulfide bonds, enabled the preparation of specifically monolanthanide (europium)-labeled human insulin-like peptide 3 (INSL3) for the study of its interaction with its G-protein-coupled receptor, RXFP2, via time-resolved fluorometry. A commercially available chelator, diethylene triamine pentaacetic acid (DTPA), was coupled to the N-terminus of the INSL3 A-chain on the solid phase, and then a coordination complex between europium ion and DTPA was formed using EuCl 3 to protect the chelator from production of an unidentified adduct during subsequent combination of the A- and B-chains. The labeled peptide was purified in high yield using high-performance liquid chromatography with nearly neutral pH buffers to prevent the liberation of Eu (3+) from the chelator. Using time-resolved fluorometry, saturation binding assays were undertaken to determine the binding affinity (p K d) of labeled INSL3 for RXFP2 in HEK-293T cells stably expressing RXFP2. The dissociation constant of DTPA-labeled INSL3 (9.05 +/- 0.03, n = 3) that was obtained from saturation binding experiments was comparable to that of (125)I-labeled INSL3 (9.59 +/- 0.09, n = 3). The receptor binding affinity (p K i) of human INSL3 was determined to be 9.27 +/- 0.06, n = 3, using Eu-DTPA-INSL3 as a labeled ligand, which again is similar to that obtained when (125)I-INSL3 was used as labeled ligand (9.34 +/- 0.02, n = 4). This novel lanthanide-coordinated, DTPA-labeled INSL3 has excellent sensitivity, stability, and high specific activity, properties that will be particularly beneficial in high-throughput screening of INSL3 analogues in structure-activity studies.

Defining the LGR8 residues involved in binding insulin-like peptide 3.

The peptide hormone insulin-like peptide 3 (INSL3) is essential for testicular descent and has been implicated in the control of adult fertility in both sexes. The human INSL3 receptor leucine-rich repeat-containing G protein-coupled receptor 8 (LGR8) binds INSL3 and relaxin with high affinity, whereas the relaxin receptor LGR7 only binds relaxin. LGR7 and LGR8 bind their ligands within the 10 leucine-rich repeats (LRRs) that comprise the majority of their ectodomains. To define the primary INSL3 binding site in LGR8, its LRRs were first modeled on the crystal structure of the Nogo receptor (NgR) and the most likely binding surface identified. Multiple sequence alignment of this surface revealed the presence of seven of the nine residues implicated in relaxin binding to LGR7. Replacement of these residues with alanine caused reduced [(125)I]INSL3 binding, and a specific peptide/receptor interaction point was revealed using competition binding assays with mutant INSL3 peptides. This point was used to crudely dock the solution structure of INSL3 onto the LRR model of LGR8, allowing the prediction of the INSL3 Trp-B27 binding site. This prediction was then validated using mutant INSL3 peptide competition binding assays on LGR8 mutants. Our results indicated that LGR8 Asp-227 was crucial for binding INSL3 Arg-B16, whereas LGR8 Phe-131 and Gln-133 were involved in INSL3 Trp-B27 binding. From these two defined interactions, we predicted the complete INSL3/LGR8 primary binding site, including interactions between INSL3 His-B12 and LGR8 Trp-177, INSL3 Val-B19 and LGR8 Ile-179, and INSL3 Arg-B20 with LGR8 Asp-181 and Glu-229.

Synthesis and circular dichroism spectroscopic investigations of oligomeric beta-peptoids with alpha-chiral side chains.

Biomimetic oligomers are of large interest both as targets for combinatorial and parallel synthetic efforts and as foldamers. For example, shorter peptoid derivatives of beta-peptides, i.e., oligo-N-substituted beta-Ala, have been described as potential lead structures. Herein, we describe a solid-phase synthetic route to beta-peptoids with alpha-chiral aromatic N-substituents up to 11 residues long. Furthermore, the folding propensities of these oligomers were investigated by circular dichroism (CD) spectroscopy.

Poly-N-methylated alpha-peptides: synthesis and X-ray structure determination of beta-strand forming foldamers.

The first high resolution X-ray structure determination of poly-N-methylated alpha-peptides, a class of peptides widely used in biomedical research, is described; it shows that these molecules adopt a beta-strand conformation.

A novel immunostimulator, N-[alpha-O-benzyl-N-(acetylmuramyl)-L-alanyl-D-isoglutaminyl]-N6-trans-(m-nitrocinnamoyl)-L-lysine, and its adjuvancy on the hepatitis B surface antigen.

N(2)-[alpha-O-benzyl-N-(acetylmuramyl)-L-alanyl-D-isoglutaminyl]-N(6)-trans-(m-nitrocinnamoyl)-L-lysine (muramyl dipeptide C, or MDP-C) has been synthesized as a novel, nonspecific immunomodulator. The present study shows that MDP-C induces strong cytolytic activity by macrophages on P388 leukemia cells and cytotoxic activity by cytotoxic T lymphocytes (CTLs) on P815 mastocytoma cells. Our results also indicate that MDP-C is an effective stimulator for production of interleukin-2 and interleukin-12 by murine bone marrow derived dendritic cells (BMDCs) and production of interferon-gamma by CTLs. Additionally, MDP-C increases the expression levels of several surface molecules, including CD11c, MHC class I, and intercellular adhesion molecule-1 in BMDCs. Moreover, MDP-C remarkably enhances the immune system's responsiveness to hepatitis B surface antigen (HBsAg) in hepatitis B virus transgenic mice for both antibody production and specific HBsAg T-cell responses ex vivo. Our results indicate that MDP-C is an apyrogenic, nonallergenic, and low-toxicity immunostimulator with great potential for diagnostic, immunotherapeutic, and prophylactic applications in diseases such as hepatitis B and cancers.

Minimum active structure of insulin-like peptide 5.

Insulin-like peptide 5 (INSL5) is a complex two-chain peptide hormone constrained by three disulfide bonds in a pattern identical to insulin. High expression of INSL5 in the colon suggests roles in activation of colon motility and appetite control. A more recent study indicates it may have significant roles in the regulation of insulin secretion and ß-cell homeostasis. This peptide thus has considerable potential for the treatment of eating disorders, obesity, and/or diabetes. However, the synthesis of INSL5 is extremely challenging either by chemical or recombinant means. The A-chain is very poorly soluble and the B-chain is highly aggregating in nature which, together, makes their postsynthesis handling and purification very difficult. Given these difficulties, we have developed a highly active INSL5 analogue that has a much simpler structure with two disulfide bonds and is thus easier to assemble compared to native INSL5. This minimized peptide represents an attractive new mimetic for investigating the functional role of INSL5.

Minimization of human relaxin-3 leading to high-affinity analogues with increased selectivity for relaxin-family peptide 3 receptor (RXFP3) over RXFP1.

Relaxin-3 is a neuropeptide that is implicated in the regulation of stress responses and memory. The elucidation of its precise physiological role(s) has, however, been hampered by cross-activation of the relaxin-2 receptor, RXFP1, in the brain. The current study undertook to develop analogues of human relaxin-3 (H3 relaxin) that can selectively bind and activate its receptor, RXFP3. We developed a high-affinity selective agonist (analogue 2) by removal of the intra-A chain disulfide bond and deletion of 10 residues from the N terminus of the A chain. Further truncation of this analogue from the C terminus of the B chain to Cys(B22) and addition of an Arg(B23) led to a high-affinity, RXFP3-selective, competitive antagonist (analogue 3). Central administration of analogue 2 in rats increased food intake, which was blocked by prior coadministration of analogue 3. These novel RXFP3-selective peptides represent valuable pharmacological tools to study the physiological roles of H3 relaxin/RXFP3 systems in the brain and important leads for the development of novel compounds for the treatment of affective and cognitive disorders.

Design and development of analogues of dimers of insulin-like peptide 3 B-chain as high-affinity antagonists of the RXFP2 receptor.

Insulin-like peptide 3 (INSL3) is one of 10 members of the human relaxin-insulin superfamily of peptides. It is a peptide hormone that is expressed by fetal and postnatal testicular Leydig cells and postnatal ovarian thecal cells. It mediates testicular descent during fetal life and suppresses sperm apoptosis in adult males, whereas, in females, it causes oocyte maturation. INSL3 has also been shown to promote thyroid tumor growth and angiogenesis in human. These actions of INSL3 are mediated through its G protein-coupled receptor, RXFP2. INSL3, a two-chained peptide, binds to its receptor primarily via its B-chain, whereas elements of the A-chain are essential for receptor activation. In an attempt to design a high-affinity antagonist with potential clinical application as an anticancer agent as well as a contraceptive, we have previously prepared a synthetic parallel dimer of INSL3 B-chain and demonstrated that it binds to RXFP2 with high affinity. In this work, we undertook full pharmacological characterization of this peptide and show that it can antaogonize INSL3-mediated cAMP signaling through RXFP2. Further refinement by truncation of 18 residues yielded a minimized analogue that retained full binding affinity and INSL3 antagonism. It is an attractive lead peptide for in vivo evaluation as an inhibitor of male and female fertility and of INSL3-mediated carcinogenesis.

Peptide-based leptin receptor antagonists for cancer treatment and appetite regulation.

Leptin, a multifunctional hormone, controls various processes in both the central nervous system and in peripheral tissues. Because of the presence of multiple leptin/receptor (ObR) interaction sites and diverse leptin activities, the literature lacks truly monofunctional leptin protein derivatives or fragments. To date, selective ObR antagonists have not been reported. We developed short, pharmacologically advantageous peptide analogs of ObR-binding site III of leptin that acted as selective ObR inhibitors without any partial agonistic activity. These reduced leptin-dependent growth and signaling in cancer cell lines at picomolar and low nanomolar concentrations. In immunocompromised mice the peptides suppressed the growth of rapidly proliferating orthotopic human breast cancer xenografts by 50% when administered either intraperitoneally (i.p.) or subcutaneously (s.c.) for 38 days at a 0.1 mg/kg/day dose. The peptides were distributed to the brain, and when added to growing C57BL/6 normal mice i.p., s.c., or orally, the lead antagonist accelerated normal weight increase without producing any toxic effects. Weight gain increases could not be observed after 10-12 days of treatment indicating that the mice became resistant to the central nervous system activity of leptin antagonists. However, in normal growing rats the intranasal administration at 0.1 mg/kg/day for 20 days resulted in a 2% net total body weight gain without signs of resistance induction. In addition to the potential of these peptides in drug development against primary and metastatic tumors and cachexia, our data confirm that resistance to leptin resides at the blood-brain barrier.

Role of the intra-A-chain disulfide bond of insulin-like peptide 3 in binding and activation of its receptor, RXFP2.

INSL3 is a member of the insulin-IGF-relaxin superfamily and plays a key role in male fetal development and in adult germ cell maturation. It is the cognate ligand for RXFP2, a leucine-rich repeat containing G-protein coupled receptor. To date, and in contrast to our current knowledge of the key structural features that are required for the binding of INSL3 to RXFP2, comparatively little is known about the key residues that are required to elicit receptor activation and downstream cell signaling. Early evidence suggests that these are contained principally within the A-chain. To further explore this hypothesis, we have undertaken an examination of the functional role of the intra-A-chain disulfide bond. Using solid-phase peptide synthesis together with regioselective disulfide bond formation, two analogs of human INSL3 were prepared in which the intra-chain disulfide bond was replaced, one in which the corresponding Cys residues were substituted with the isosteric Ser and the other in which the Cys were removed altogether. Both of these peptides retained nearly full RXFP2 receptor binding but were devoid of cAMP activity (receptor activation), indicating that the intra-A-chain disulfide bond makes a significant contribution to the ability of INSL3 to act as an RXFP2 agonist. Replacement of the disulfide bond with a metabolically stable dicarba bond yielded two isomers of INSL3 that each exhibited bioactivity similar to native INSL3. This study highlights the critical structural role played by the intra-A-chain disulfide bond of INSL3 in mediating agonist actions through the RXFP2 receptor.

The chemical synthesis of relaxin and related peptides.

Successful methods for the chemical assembly of insulin-like peptides allow the detailed study of their structure and function relationships. However, the two-chain, three-disulfide bond structure of this family of peptides, which includes relaxin, has long represented a significant challenge with respect to their chemical synthesis. Early efforts involved the random combination of the two synthetic S-reduced chains under oxidizing conditions to spontaneously form the three disulfide bonds. Such an approach, while generally effective for native sequences, is critically dependent upon the presence of intact secondary structures within the individual chains which guide the subsequent folding and oxidation pathway. This limitation prevents the use of this approach for the preparation of analogs in which these secondary elements are either absent or modified. Nowadays, the use of highly efficient solid-phase peptide synthesis methodologies together with selective S-thiol-protecting groups allows the acquisition of individual chains that can be combined by effective sequential chemically directed formation of each of the three disulfide bonds. These approaches have allowed the high-yield assembly of an array of insulin-like peptides which, in turn, has provided considerable and valuable structural and biological information.

The structural and functional role of the B-chain C-terminal arginine in the relaxin-3 peptide antagonist, R3(BDelta23-27)R/I5.

Relaxin-3, a member of the insulin superfamily, is involved in regulating stress and feeding behavior. It is highly expressed in the brain and is the endogenous ligand for the receptor RXFP3. As relaxin-3 also interacts with the relaxin receptor RXFP1, selective agonists and antagonists are crucial for studying the physiological function(s) of the relaxin-3/RXFP3 pair. The analog R3(BDelta23-27)R/I5, in which a C-terminally truncated human relaxin-3 (H3) B-chain is combined with the INSL5 A-chain, is a potent selective RXFP3 antagonist and has an Arg residue remaining on the B-chain C-terminus as a consequence of the recombinant protein production process. To investigate the role of this residue in the RXFP3 receptor binding and activation, the analogs R3(BDelta23-27)R/I5 and R3(BDelta23-27)R containing the B-chain C-terminal Arg as well as R3(BDelta23-27)/I5 and R3(BDelta23-27), both lacking the Arg, were chemically assembled and their secondary structure and receptor activity assessed. The peptides generally had a similar conformation but those with the extra Arg residue displayed a significantly increased affinity for the RXFP3. Interestingly, in contrast to R3(BDelta23-27)R and R3(BDelta23-27)R/I5, the peptide R3(BDelta23-27) is a weak agonist. This suggests that the C-terminal Arg, although increasing the affinity, alters the manner in which the peptide binds to the receptor and thereby prevents activation, giving R3(BDelta23-27)R/I5 its potent antagonistic activity.