Quasi-open Cu(I) sites for efficient CO separation with high O2/H2O tolerance.

Carbon monoxide (CO) separation relies on chemical adsorption but suffers from the difficulty of desorption and instability of open metal sites against O2, H2O and so on. Here we demonstrate quasi-open metal sites with hidden or shielded coordination sites as a promising solution. Possessing the trigonal coordination geometry (sp2), Cu(I) ions in porous frameworks show weak physical adsorption for non-target guests. Rational regulation of framework flexibility enables geometry transformation to tetrahedral geometry (sp3), generating a fourth coordination site for the chemical adsorption of CO. Quantitative breakthrough experiments at ambient conditions show CO uptakes up to 4.1 mmol g-1 and CO selectivity up to 347 against CO2, CH4, O2, N2 and H2. The adsorbents can be completely regenerated at 333-373 K to recover CO with a purity of >99.99%, and the separation performances are stable in high-concentration O2 and H2O. Although CO leakage concentration generally follows the structural transition pressure, large amounts (>3 mmol g-1) of ultrahigh-purity (99.9999999%, 9N; CO concentration < 1 part per billion) gases can be produced in a single adsorption process, demonstrating the usefulness of this approach for separation applications.

Isomeric Porous Cu(I) Triazolate Frameworks Showing Periodic and Aperiodic Flexibility for Efficient CO Separation.

Guest-induced (crystal-to-crystal) transformation, i.e., periodic flexibility, is a typical feature of molecule-based crystalline porous materials, but its role for adsorptive separation is controversial. On the other hand, aperiodic flexibility is rarely studied. This work reports a pair of isomeric Cu(I) triazolate frameworks, namely, α-[Cu(fetz)] (MAF-2Fa) and ß-[Cu(fetz)] (MAF-2Fb), which show typical periodic and aperiodic flexibility for CO chemical adsorption, respectively. Quantitative mixture breakthrough experiments show that, while MAF-2Fa exhibits high adsorption capacity at high pressures but negligible adsorption below the threshold pressure and with leakage concentrations of 3-8%, MAF-2Fb exhibits relatively low adsorption capacity at high pressures but no leakage (residual CO concentration <1 ppb). Tandem connection of MAF-2Fa and MAF-2Fb can combine their advantages of high CO adsorption capacities at high and low pressures, respectively. MAF-2Fa and MAF-2Fb can both keep the separation performances unchanged at high relative humidities, but only MAF-2Fb shows a unique coadsorption behavior at a relative humidity of 82%, which can be used to improve purification performances.

Characteristics of tandem repeat inheritance and sympathetic nerve involvement in GAA-FGF14 ataxia.

BACKGROUND: Intronic GAA repeat expansion ([GAA] ≥250) in FGF14 is associated with the late-onset neurodegenerative disorder, spinocerebellar ataxia 27B (SCA27B, GAA-FGF14 ataxia). We aim to determine the prevalence of the GAA repeat expansion in FGF14 in Chinese populations presenting late-onset cerebellar ataxia (LOCA) and evaluate the characteristics of tandem repeat inheritance, radiological features and sympathetic nerve involvement. METHODS: GAA-FGF14 repeat expansion was screened in an undiagnosed LOCA cohort (n = 664) and variations in repeat-length were analyzed in families of confirmed GAA-FGF14 ataxia patients. Brain magnetic resonance imaging (MRI) was used to evaluate the radiological feature in GAA-FGF14 ataxia patients. Clinical examinations and sympathetic skin response (SSR) recordings in GAA-FGF14 patients (n = 16) were used to quantify sympathetic nerve involvement. RESULTS: Two unrelated probands (2/664) were identified. Genetic screening for GAA-FGF14 repeat expansion was performed in 39 family members, 16 of whom were genetically diagnosed with GAA-FGF14 ataxia. Familial screening revealed expansion of GAA repeats in maternal transmissions, but contraction upon paternal transmission. Brain MRI showed slight to moderate cerebellar atrophy. SSR amplitude was lower in GAA-FGF14 patients in pre-symptomatic stage compared to healthy controls, and further decreased in the symptomatic stage. CONCLUSIONS: GAA-FGF14 ataxia was rare among Chinese LOCA cases. Parental gender appears to affect variability in GAA repeat number between generations. Reduced SSR amplitude is a prominent feature in GAA-FGF14 patients, even in the pre-symptomatic stage.

Three-Step Ferroelastic Transitions from Hexagonal to Triclinic Phases in a Hybrid Perovskite: (1-Fluoromethyl-1-methylpyrrolidine)[CdCl3].

Hybrid ferroelastic crystals have emerged as a hot research topic in recent years owing to their prospective applications in piezoelectric sensors, mechanical switches, and optoelectronic devices. Nevertheless, most of the documented materials exhibit one-step or two-step ferroelastic phase transition(s), and those with multistep ferroelastic transitions are extremely scarce. We present a new hexagonal molecular perovskite based on a fluoro-substituted flexible cyclic ammonium cation, (1-fluoromethyl-1-methylpyrrolidine)[CdCl3] (1), undergoing unusual three-step ferroelastic phase transitions from hexagonal paraelastic phase to orthorhombic, monoclinic, and triclinic ferroelastic phases at 388, 376, and 311 K, respectively, with Aizu notation of 6/mmmFmmm, mmmF2/m, and 2/mF-1, featuring spontaneous strain of 0.002, 0.023, and 0.110, respectively. Furthermore, variable-temperature single-crystal diffraction reveals that the phase-transition mechanism in 1 principally originates from intriguing dynamic change of organic cations and synchronous displacement of inorganic chains. This scarce instance of multistep hybrid ferroelastic provides important clues for finding advanced ferroelastic materials.

Spin-State Control in Dysprosium(III) Metallacrown Magnets via Thioacetal Modification.

Integrating controllable spin states into single-molecule magnets (SMMs) enables precise manipulation of magnetic interactions at a molecular level, but remains a synthetic challenge. Herein, we developed a 3d-4f metallacrown (MC) magnet [DyNi5(quinha)5(Clsal)2(py)8](ClO4) ⋅ 4H2O (H2quinha=quinaldichydroxamic acid, HClsal=5-chlorosalicylaldehyde) wherein a square planar NiII is stabilized by chemical stacking. Thioacetal modification was employed via post-synthetic ligand substitutions and yielded [DyNi5(quinha)5(Clsaldt)2(py)8](ClO4) ⋅ 3H2O (HClsaldt=4-chloro-2-(1,3-dithiolan-2-yl)phenol). Thanks to the additional ligations of thioacetal onto the NiII site, coordination-induced spin state switching (CISSS) took place with spin state altering from low-spin S=0 to high-spin S=1. The synergy of CISSS effect and magnetic interactions results in distinct energy splitting and magnetic dynamics. Magnetic studies indicate prominent enhancement of reversal barrier from 57 cm-1 to 423 cm-1, along with hysteresis opening and an over 200-fold increment in coercive field at 2 K. Ab initio calculations provide deeper insights into the exchange models and rationalize the relaxation/tunnelling pathways. These results demonstrate here provide a fire-new perspective in modulating the magnetization relaxation via the incorporation of controllable spin states and magnetic interactions facilitated by the CISSS approach.

Molecular Design of a Metal-Nitrosyl Ferroelectric with Reversible Photoisomerization.

The development of photo-responsive ferroelectrics whose polarization may be remotely controlled by optical means is of fundamental importance for basic research and technological applications. Herein, we report the design and synthesis of a new metal-nitrosyl ferroelectric crystal (DMA)(PIP)[Fe(CN)5(NO)] (1) (DMA = dimethylammonium, PIP = piperidinium) with potential phototunable polarization via a dual-organic-cation molecular design strategy. Compared to the parent non-ferroelectric (MA)2[Fe(CN)5(NO)] (MA = methylammonium) material with a phase transition at 207 K, the introduction of larger dual organic cations both lowers the crystal symmetry affording robust ferroelectricity and increases the energy barrier of molecular motions, endowing 1 with a large polarization of up to 7.6 µC cm-2 and a high Curie temperature (Tc) of 316 K. Infrared spectroscopy shows that the reversible photoisomerization of the nitrosyl ligand is accomplished by light irradiation. Specifically, the ground state with the N-bound nitrosyl ligand conformation can be reversibly switched to both the metastable state I (MSI) with isonitrosyl conformation and the metastable state II (MSII) with side-on nitrosyl conformation. Quantum chemistry calculations suggest that the photoisomerization significantly changes the dipole moment of the [Fe(CN)5(NO)]2- anion, thus leading to three ferroelectric states with different values of macroscopic polarization. Such optical accessibility and controllability of different ferroelectric states via photoinduced nitrosyl linkage isomerization open up a new and attractive route to optically controllable macroscopic polarization.

Nonlinear Optical Glass-Ceramic From a New Polar Phase-Transition Organic-Inorganic Hybrid Crystal.

Melt-quenched glasses of organic-inorganic hybrid crystals, i.e., hybrid glasses, have attracted increasing attention as an emerging class of hybrid materials with beneficial processability and formability in the past years. Herein, we present a new hybrid crystal, (Ph3 PEt)3 [Ni(NCS)5 ] (1, Ph3 PEt+ =ethyl(triphenyl)phosphonium), crystallizing in a polar space group P1 and exhibiting thermal-induced reversible crystal-liquid-glass-crystal transitions with relatively low melting temperature of 132 °C, glass-transition temperature of 40 °C, and recrystallization on-set temperature of 78 °C, respectively. Taking advantage of such mild conditions, we fabricated an unprecedented hybrid glass-ceramic thin film, i.e., a thin glass uniformly embedding inner polar micro-crystals, which exhibits a much enhanced intrinsic second-order nonlinear optical effect, being ca. 25.6 and 3.1 times those of poly-crystalline 1 and KH2 PO4 , respectively, without any poling treatments.

Insights into the Molecular Dynamics of Quasi-Spherical (Chloromethyl)triethylammonium Confined in a Weakly Bound Ionic Cocrystal.

Here, we report a weakly bound ionic cocrystal, (Et3NCH2Cl)2[ZnCl4], which undergoes a reversible structural phase transition owing to the switched molecular dynamics of the quasi-spherical (Et3NCH2Cl)+ cation from static to dynamic. Interestingly, a unique rolling and moving mechanism is uncovered for such a cation in the high-temperature phase, where its two methylene groups exhibit different kinetic energy barriers. This study provides a meaningful insight into the solid-state molecular dynamics of large-size quasi-spherical molecules that contain both a rigid core and flexible shell.

Silver(I)-Based Molecular Perovskite Energetic Compounds with Exceptional Thermal Stability and Energetic Performance.

In recent years, molecular perovskite energetic materials have attracted more attention because of their simple synthesis processes, high thermal stabilities, excellent performances, and great significance as a design platform for energetic materials. To explore the possibility of the application of molecular perovskite energetic materials in heat-resistant explosives, four silver(I)-based molecular perovskite energetic compounds, (H2A)[Ag(ClO4)3], where H2A = piperazine-1,4-diium (H2pz2+) for PAP-5, 1-methyl-piperazine-1,4-diium (H2mpz2+) for PAP-M5, homopiperazine-1,4-diium (H2hpz2+) for PAP-H5, and 1,4-diazabicyclo[2.2.2]octane-1,4-diium (H2dabco2+) for DAP-5, were synthesized by a one-pot self-assembly strategy and structurally characterized. The single-crystal structures indicated that PAP-5, PAP-M5, and DAP-5 possess cubic perovskite structures while PAP-H5 possesses a hexagonal perovskite structure. Differential thermal analyses showed that their onset decomposition temperatures are >308.3 °C. For PAP-5 and DAP-5, they have not only exceptional calculated detonation parameters (D values of 8.961 and 8.534 km s-1 and P values of 42.4 and 37.9 GPa, respectively) but also the proper mechanical sensitivity (impact sensitivities of ≤10 J for PAP-5 and 3 J for DAP-5 and friction sensitivities of ≤5N for both PAP-5 and DAP-5) and thus are of interest as potential heat-resistant primary explosive components.

Above-Room-Temperature Ferroelastic Phase Transitions in Two Tetrafluoroborate-Based Hexagonal Molecular Perovskites.

ABX3-type molecular perovskites provide an important platform to tune phase transitions, via judiciously choosing A-, B-, and X-site components, to approach advanced functional materials for applications. Although tetrafluoroborate can act as X-site component to assemble ten instances of ABX3 molecular perovskites, only two of them possess hexagonal perovskite structures. Herein, we report two tetrafluoroborate-based hexagonal molecular perovskites, A[Na(BF4)3], by judiciously choosing two different A-site cations: 1-methyl-1,4-diazabicyclo[2.2.2]octane-1,4-diium (Hmdabco2+) for 1 and 1-methylpiperazine-1,4-diium (H2mpz2+) for 2. They have high-temperature phases in the same space group (P63/mmc) revealing highly disordered A-site cations. Upon cooling, 1 undergoes two-step P63/mmc ↔ P3̅c1 ↔ P21/n transitions at 344 and 338 K, respectively, including a ferroelastic one (3̅mF2/m) accompanied by a spontaneous strain of 0.013. In contrast, the smaller H2mpz2+ cation with more adoptable conformations induces a one-step sharp P63/mmc ↔ P21/c ferroelastic transition (6/mmmF2/m(s)) at 418 K in 2, leading to more significant symmetry breaking and a considerable spontaneous strain of 0.129. This study provides important clues to modulate structural phase transitions by tuning diverse components for the multicomponent dense hybrid crystals.

Reversible Switchability of Magnetic Anisotropy and Magnetodielectric Effect Induced by Intermolecular Motion.

Introducing magnetic switchability into artificial molecular machines is fascinating for precise control of magnetism via external stimuli. Herein, a field-induced CoII single-molecule magnet was found to exhibit the reversible switch of Jahn-Teller distortion near room temperature, along with thermal conformational motion of the 18-crown-6 rotor, which pulls the coordinated H2 O to rotate through intermolecular hydrogen bonds and triggers a single-crystal-to-single-crystal phase transition with Twarm =282 K and Tcool =276 K. Interestingly, the molecular magnetic anisotropy probed by single-crystal angular-resolved magnetometry revealed the reorientation of easy axis by 14.6°. Moreover, ON/OFF negative magnetodielectric effects were respectively observed in the high-/low-temperature phase, which manifests the spin-lattice interaction in the high-temperature phase could be stronger, in accompanied by the hydrogen bonding between the rotating 18-crown-6 and the coordinated H2 O.

An Exceptional Thermally Induced Four-State Nonlinear Optical Switch Arising from Stepwise Molecular Dynamic Changes in a New Hybrid Salt.

Switching materials in channels of nonlinear optics (NLOs) are of particular interest in NLO material science. Numerous crystalline NLO switches based on structural phase transition have emerged, but most of them reveal a single-step switch between two different second-harmonic-generation (SHG) states, and only very rare cases involve three or more SHG states. Herein, we report a new organic-inorganic hybrid salt, (Me3 NNH2 )2 [CdI4 ], which is an unprecedented case of a reversible three-step NLO switch between SHG-silent, -medium, -low, and -high states, with high contrasts of 25.5/4.3/9.2 in a temperature range of 213-303 K. By using the combined techniques of variable-temperature X-ray single-crystal structural analyses, dielectric constants, solid-state 13 C nuclear magnetic resonance spectroscopy, and Hirshfeld surface analyses, we disclose that this four-state switchable SHG behavior is highly associated with the stepwise-changed molecular dynamics of the polar organic cations. This finding demonstrates well the complexity of molecular dynamics in simple hybrid salts and their potential in designing new advanced multistep switching materials.

Hybrid Germanium Bromide Perovskites with Tunable Second Harmonic Generation.

Ge-based hybrid perovskite materials have demonstrated great potential for second harmonic generation (SHG) due to the geometry and lone-pair induced non-centrosymmetric structures. Here, we report a new family of hybrid 3D Ge-based bromide perovskites AGeBr3 , A=CH3 NH3 (MA), CH(NH2 )2 (FA), Cs and FAGe0.5 Sn0.5 Br3 , crystallizing in polar space groups. These compounds exhibit tunable SHG responses, where MAGeBr3 shows the strongest SHG intensity (5×potassium dihydrogen phosphate, KDP). Structural and theoretical analysis indicate the high SHG efficiency is attributed to the displacement of Ge2+ along [111] direction and the relatively strong interactions between lone pair electrons of Ge2+ and polar MA cations along the c-axis. This work provides new structural insights for designing and fine-tuning the SHG properties in hybrid metal halide materials.

Photoresponsive Organic-Inorganic Hybrid Ferroelectric Designed at the Molecular Level.

Molecular ferroelectrics are becoming an important area of research due to their ability to form a variety of structures exhibiting the desired properties. However, the precise control over the assembly of molecular building blocks for the design and synthesis of photoresponsive molecular ferroelectrics remains a considerable challenge. Here, we report a new hybrid high-temperature ferroelectric, (Me2NH2)[NaFe(CN)5(NO)], by judiciously assembling inorganic photochromic nitroprusside anion, as the framework building block, and polar organic cation Me2NH2+, as the dipole-moment carrier, into the crystal lattice. Ferroelectricity arises through the synergetic ordering of Me2NH2+ below 408 K. Piezoresponse force microscopy witnessed the presence of 180° ferroelectric domains and evidenced polarization switching by repeatedly applying an external electric field. Irradiation of the N-bound nitrosyl ligand (ground state) leads to two different conformations: isonitrosyl O-bound (metastable state I) and side-on nitrosyl conformation (metastable state II). Such photoisomerization realized in solid-state molecular ferroelectrics allows for the photoswitching between the ferroelectric ground state and the metastable state. These results pave the way for new design approaches toward developing next-generation photostimulated ferroelectric materials at the molecular level.

Supercooling Behavior and Dipole-Glass-like Relaxation in a Three-Dimensional Water Framework.

The dynamic behaviors of a new type of three-dimensional (3D) water framework symbiotic with 1D stacking organic guests, including an order-disorder transition of hydrogen atoms, a supercooling phenomenon during phase transition, and a dipole-glass-like relaxation behavior due to locally trapped water molecules, are presented. This extremely scarce 3D water framework, together with the rich dynamic behaviors it exhibits, provides new clues to design new ice-like models for promoting the fundamental understanding of the dynamic behavior of water in diverse solid-states.

Partially Fluorinated Cu(I) Triazolate Frameworks with High Hydrophobicity, Porosity, and Luminescence Sensitivity.

Solvothermal reactions of 3-methyl-5-trifluoromethyl-1,2,4-triazole (Hfmtz) with Cu(CH3COO)2 at 120 °C in the presence of Cl- generate two partially fluorinated coordination polymers: i.e., [Cu4Cl(fmtz)3] (1 or MAF-51) and [Cu7Cl(fmtz)6] (2 or MAF-52). Single-crystal X-ray diffraction revealed 1 to have a three-dimensional (3D) nonporous structure with pcu topology consisting of 6-connected Cu4(µ4-Cl) clusters and 2 to possess a highly porous (void ratio 48%) 3D bnn network consisting of 5-connected Cu5(µ5-Cl) clusters. Benefiting from the hydrophobic pendant groups, complete coordination of the ligand N atoms, and strong M-N coordination bonds, 1 and 2 possess high water stability (exposed to water for at least 1 year) and hydrophobicity (water contact angles of 141° and 148°, respectively). The N2 sorption isotherm of activated 2 gave Langmuir/BET surface areas of 1023/848 m2 g-1 and a pore volume of 0.365 cm3 g-1. Moreover, 2 can adsorb large amounts of benzene and methanol but barely adsorb water. Both 1 and 2 show phosphorescence of Cu(I) complexes, but only that of porous 2 is sensitive to O2, showing a linear Stern-Volmer response below 1 mbar with an ultrahigh Ksv value of 5234 bar-1 and ultralow limit of detection of 1.9 ppm.

Molecular Dynamics, Phase Transition and Frequency-Tuned Dielectric Switch of an Ionic Co-Crystal.

Dielectric switches that can be converted between high and low dielectric states by thermal stimuli have attracted much interest owing to their many potential applications. Currently one main drawback for practical application lies in the non-tunability of their switch temperatures (TS ). We report here an ionic co-crystal (Me3 NH)4 [Ni(NCS)6 ] that contains a multiply rotatable Me3 NH+ ion and a solely rotatable one due to a more spacious supramolecular cage for the former one. This compound undergoes an isostructural order-disorder phase transition and it can function as a frequency-tuned dielectric switch with highly adjustable TS , which is further revealed by the variable-temperature structure analyses and molecular dynamics simulations. In addition, the distinct arrangements and molecular dynamics of two coexisting Me3 NH+ ions confined in different lattice spaces as well as the notable offset effect on the promoting/hindering of dipolar reorientation after dielectric transition provide a rarely observed but fairly good model for understanding and modulating the dipole motion in crystalline environment.

Electrochemical Exfoliation of Pillared-Layer Metal-Organic Framework to Boost the Oxygen Evolution Reaction.

Two-dimensional (2D) materials and ultrathin nanosheets are advantageous for elevating the catalysis performance and elucidating the catalysis mechanism of heterogeneous catalysts, but they are mostly restricted to inorganic or organic materials based on covalent bonds. We report an electrochemical/chemical exfoliation strategy for synthesizing metal-organic 2D materials based on coordination bonds. A catechol functionalized ligand is used as the redox active pillar to construct a pillared-layer framework. When the 3D pillared-layer MOF serves as an electrocatalyst for water oxidation (pH 13), the pillar ligands can be oxidized in situ and removed. The remaining ultrathin (2 nm) nanosheets of the metal-organic layers are an efficient catalyst with overpotentials as low as 211 mV at 10 mA cm-2 and a turnover frequency as high as 30 s-1 at an overpotential of 300 mV.

Crystalline Supramolecular Gyroscope with a Water Molecule as an Ultrasmall Polar Rotator Modulated by Charge-Assisted Hydrogen Bonds.

A new strategy for the construction of crystalline molecular rotors is presented. The combination of a conformation-modifiable macrocyclic host and two cooperative guests affords one supramolecular gyroscope-like compound, (t-BuNH3)(18-crown-6)[ZnCl3(H2O)], in which the coordinated water molecule functions as an ultrasmall polar rotator, revealed by its significant dielectric relaxation and the molecular dynamics simulations. In addition, such a compound can reversibly undergo a polar-to-polar phase transition triggered by the changed conformation of the 18-crown-6 host, leading to a switchable on/off rotation of water molecule, well controlled by strength and direction of charge-assisted hydrogen bonds.

A Molecular Perovskite with Switchable Coordination Bonds for High-Temperature Multiaxial Ferroelectrics.

The underlying phase transitions of ferroelectric mechanisms in molecular crystals are mainly limited to order-disorder and displacive types that are not involved in breaking of the chemical bonds. Here, we show that the bond-switching transition under ambient pressure is designable in molecular crystals, and demonstrate how to utilize the weaker and switchable coordination bonds in a novel molecular perovskite, [(CH3)3NOH]2[KFe(CN)6] (TMC-1), to afford a scarce multiaxial ferroelectrics with a high Curie temperature of 402 K and 24 equivalent ferroelectric directions (more than BaTiO3). The high-quality thin films of TMC-1 can be easily fabricated by a simple solution process, and to reveal perfect ferroelectric properties at both macroscopic and microscopic scales, suggesting TMC-1 as a promising candidate for applications in next-generation flexible electronics. The presented molecular assembly strategy, together with the achieved bond-switching ferroelectric mechanism, opens a new avenue for designing advanced ferroelectric materials.