Pivotal role of reversible NiO6 geometric conversion in oxygen evolution.

Realizing an efficient electron transfer process in the oxygen evolution reaction by modifying the electronic states around the Fermi level is crucial in developing high-performing and robust electrocatalysts1-3. Typically, electron transfer proceeds solely through either a metal redox chemistry (an adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (a lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level), without the concurrent occurrence of both metal and oxygen redox chemistries in the same electron transfer pathway1-15. Here we report an electron transfer mechanism that involves a switchable metal and oxygen redox chemistry in nickel-oxyhydroxide-based materials with light as the trigger. In contrast to the traditional AEM and LOM, the proposed light-triggered coupled oxygen evolution mechanism requires the unit cell to undergo reversible geometric conversion between octahedron (NiO6) and square planar (NiO4) to achieve electronic states (around the Fermi level) with alternative metal and oxygen characters throughout the oxygen evolution process. Utilizing this electron transfer pathway can bypass the potential limiting steps, that is, oxygen-oxygen bonding in AEM and deprotonation in LOM1-5,8. As a result, the electrocatalysts that operate through this route show superior activity compared with previously reported electrocatalysts. Thus, it is expected that the proposed light-triggered coupled oxygen evolution mechanism adds a layer of understanding to the oxygen evolution research scene.

Unveiling the Pivotal Role of dx2-y2 Electronic States in Nickel-Based Hydroxide Electrocatalysts for Methanol Oxidation.

The anodic methanol oxidation reaction (MOR) plays a crucial role in coupling with the cathodic hydrogen evolution reaction (HER) and enables the sustainable production of the high-valued formate. Nickel-based hydroxide (Ni(OH)2) as MOR electrocatalyst has attracted enormous attention. However, the key factor determining the intrinsic catalytic activity remains unknown, which significantly hinders the further development of Ni(OH)2 electrocatalyst. Here, we found that the d x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ electronic state within antibonding bands plays a decisive role in the whole MOR process. The onset potential depends on the deprotonation ability (Ni2+ to Ni3+), which was closely related to the band center of d x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital. The closer of d x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital to the Fermi level showed the stronger the deprotonation ability. Meanwhile, in the high potential region, the broadening of d x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ orbital would facilitate the electron transfer from methanol to catalysts (Ni3+ to Ni2+), further enhancing the catalytic properties. Our work for the first time clarifies the intrinsic relationship between d x 2 - y 2 ${{d}_{{x}^{2}-{y}^{2}}}$ electronic state and the MOR activities, which adds a new layer of understanding to the methanol electrooxidation research scene.

Origin of Surface Reconstruction in Lattice Oxygen Oxidation Mechanism Based-Transition Metal Oxides: A Spontaneous Chemical Process.

A fundamental understanding of surface reconstruction process is pivotal to developing highly efficient lattice oxygen oxidation mechanism (LOM) based electrocatalysts. Traditionally, the surface reconstruction in LOM based metal oxides is believed as an irreversible oxygen redox behavior, due to the much slower rate of OH- refilling than that of oxygen vacancy formation. Here, we found that the surface reconstruction in LOM based metal oxides is a spontaneous chemical reaction process, instead of an electrochemical reaction process. During the chemical process, the lattice oxygen atoms were attacked by adsorbed water molecules, leading to the formation of hydroxide ions (OH- ). Subsequently, the metal-site soluble atoms leached from the oxygen-deficient surface. This work also suggests that the enhancement of surface hydrophilicity could accelerate the surface reconstruction process. Hence, such a finding could add a new layer for the understanding of surface reconstruction mechanism.

Accelerated Surface Reconstruction through Regulating the Solid-Liquid Interface by Oxyanions in Perovskite Electrocatalysts for Enhanced Oxygen Evolution.

A comprehensive understanding of surface reconstruction was critical to developing high performance lattice oxygen oxidation mechanism (LOM) based perovskite electrocatalysts. Traditionally, the primary determining factor of the surface reconstruction process was believed to be the oxygen vacancy formation energy. Hence, most previous studies focused on optimizing composition to reduce the oxygen vacancy formation energy, which in turn facilitated the surface reconstruction process. Here, for the first time, we found that adding oxyanions (SO4 2- , CO3 2- , NO3 - ) into the electrolyte could effectively regulate the solid-liquid interface, significantly accelerating the surface reconstruction process and enhancing oxygen evolution reaction (OER) activities. Further studies indicated that the added oxyanions would adsorb onto the solid-liquid interface layer, disrupting the dynamic equilibrium between the adsorbed OH- ions and the OH- ions generated during surface reconstruction process. As such, the OH- ions generated during surface reconstruction process could be more readily released into the electrolyte, thereby leading to an acceleration of the surface reconstruction. Thus, it was expected that our finding would provide a new layer of understanding to the surface reconstruction process in LOM-based perovskite electrocatalysts.

Highly Potent and Low-Volume Concentration Additives for Durable Aqueous Zinc Batteries: Machine Learning-Enabled Performance Rationalization.

The essential virtues of aqueous zinc battery chemistry stem from the energy-dense zinc metal anode and mild aqueous electrolytes. Yet, their incompatibility - as exposed by zinc's corrosion and associated dendrite problem - poses a challenge to achieving improved cycle life under practically relevant parameters. While electrolyte additives are a scalable strategy, additives that can function at low volume concentrations remain elusive. Here, through screening alkanol and alkanediol chemistries, 1,2-butanediol and pentanediol are unveiled as highly potent additives, which operate at a practical 1 volume% concentration owing to their ability to furnish dynamic solid-electrolyte interphase through pronounced interfacial filming. This unique mechanistic action renders effective corrosion and dendrite mitigation, resulting in up to five to twenty-fold zinc cyclability enhancement with a high Coulombic efficiency (up to 99.9%) and improved full-cell performance under demanding conditions, including at elevated temperatures. A machine learning-based analysis is presented to rationalize the additive performance relative to critical physicochemical descriptors, which can pave the way for a rational approach to efficient additive discoveries.

Understanding the Origin of Reconstruction in Transition Metal Oxide Oxygen Evolution Reaction Electrocatalysts.

Electrochemical water splitting to generate hydrogen energy fills a gap in the intermittency issues for wind and sunlight power. Transition metal (TM) oxides have attracted significant interest in water oxidation due to their availability and excellent activity. Typically, the transitional metal oxyhydroxides species derived from these metal oxides are often acknowledged as the real catalytic species, due to the irreversible structural reconstruction. Hence, in order to innovatively design new catalyst, it is necessary to provide a comprehensive understanding for the origin of surface reconstruction. In this review, the most recent developments in the reconstruction of transition metal-based oxygen evolution reaction electrocatalysts were introduced, and various chemical driving forces behind the reconstruction mechanism were discussed. At the same time, specific strategies for modulating pre-catalysts to achieve controllable reconfiguration, such as metal substituting, increase of structural defect sites, were summarized. At last, the issues for the further understanding and optimization of transition metal oxides compositions based on structural reconstruction were provided.

High-spin Co3+ in cobalt oxyhydroxide for efficient water oxidation.

Cobalt oxyhydroxide (CoOOH) is a promising catalytic material for oxygen evolution reaction (OER). In the traditional CoOOH structure, Co3+ exhibits a low-spin state configuration ([Formula: see text]), with electron transfer occurring in face-to-face [Formula: see text] orbitals. In this work, we report the successful synthesis of high-spin state Co3+ CoOOH structure, by introducing coordinatively unsaturated Co atoms. As compared to the low-spin state CoOOH, electron transfer in the high-spin state CoOOH occurs in apex-to-apex [Formula: see text] orbitals, which exhibits faster electron transfer ability. As a result, the high-spin state CoOOH performs superior OER activity with an overpotential of 226 mV at 10 mA cm-2, which is 148 mV lower than that of the low-spin state CoOOH. This work emphasizes the effect of the spin state of Co3+ on OER activity of CoOOH based electrocatalysts for water splitting, and thus provides a new strategy for designing highly efficient electrocatalysts.

Optimization of Sodium Storage Performance by Structure Engineering in Nickel-Cobalt-Sulfide.

The development of high-performance electrode materials is crucial for the advancement of sodium ion batteries (SIBs), and NiCo2 S4 has been identified as a promising anode material due to its high theoretical capacity and abundant redox centers. However, its practical application in SIBs is hampered by issues such as severe volume variations and poor cycle stability. Herein, the Mn-doped NiCo2 S4 @graphene nanosheets (GNs) composite electrodes with hollow nanocages were designed using a structure engineering method to relieve the volume expansion and improve the transport kinetics and conductivity of the NiCo2 S4 electrode during cycling. Physical characterization and electrochemical tests, combined with density functional theory (DFT) calculations indicate that the resulting 3 % Mn-NCS@GNs electrode demonstrates excellent electrochemical performance (352.9 mAh g-1 at 200 mA g-1 after 200 cycles, and 315.3 mAh g-1 at 5000 mA g-1 ). This work provides a promising strategy for enhancing the sodium storage performance of metal sulfide electrodes.

Key role of eg* band broadening in nickel-based oxyhydroxides on coupled oxygen evolution mechanism.

A coupled oxygen evolution mechanism (COM) during oxygen evolution reaction (OER) has been reported in nickel oxyhydroxides (NiOOH)-based materials by realizing eg* band (3d electron states with eg symmetry) broadening and light irradiation. However, the link between the eg* band broadening extent and COM-based OER activities remains unclear. Here, Ni1-xFexOOH (x = 0, 0.05, 0,2) are prepared to investigate the underlying mechanism governing COM-based activities. It is revealed that in low potential region, realizing stronger eg* band broadening could facilitate the *OH deprotonation. Meanwhile, in high potential region where the photon utilization is the rate-determining step, a stronger eg* band broadening would widen the non-overlapping region between dz2 and a1g* orbitals, thereby enhancing photon utilization efficiency. Consequently, a stronger eg* band broadening could effectuate more efficient OER activities. Moreover, we demonstrate the universality of this concept by extending it to reconstruction-derived X-NiOOH (X = NiS2, NiSe2, Ni4P5) with varying extent of eg* band broadening. Such an understanding of the COM would provide valuable guidance for the future development of highly efficient OER electrocatalysts.

Understanding of Oxygen Redox in the Oxygen Evolution Reaction.

The electron-transfer process during the oxygen evolution reaction (OER) often either proceeds solely via a metal redox chemistry (adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level). Unlike the AEM, the LOM involves oxygen redox chemistry instead of metal redox, which leads to the formation of a direct oxygen-oxygen (OO) bond. As a result, such a process is able to bypass the rate-determining step, that is, OO bonding, in AEM, which highlights the critical advantage of LOM as compared to the conventional AEM. Thus, it has been well reported that LOM-based catalysts are able to demonstrate higher OER activities as compared to AEM-based catalysts. Here, a comprehensive understanding of the oxygen redox in LOM and all documented and possible characterization techniques that can be used to identify the oxygen redox are reviewed. This review will interpret the origins of oxygen redox in the reported LOM-based electrocatalysts and the underlying science of LOM-induced surface reconstruction in transition metal oxides. Finally, perspectives on the future development of LOM electrocatalysts are also provided.

Visible or Near-Infrared Light Self-Powered Photodetectors Based on Transparent Ferroelectric Ceramics.

Transparent ferroelectrics, with promising prospects in transparent optoelectronic devices, have unique advantages in self-powered photodetection. The self-powered photodetectors based on the photovoltaic effect have quicker responses and higher stability compared with those based on the pyroelectric effect. However, the ferroelectric ceramics previously applied are always opaque and have no infrared light-stimulated photovoltaic effect. Thus, it would be very meaningful to design photodetectors based on infrared light-stimulated photovoltaic effect and/or transparent ferroelectric ceramics. In this work, highly optical transparent pristine lead lanthanum zirconate titanate (PLZT) and band gap-engineered Ni-doped PLZT ceramics with excellent piezoelectric/ferroelectric properties were prepared by hot-pressing sintering. Stable and excellent photovoltaic performance was obtained for pristine PLZT and band gap-engineered PLZT. The value of short-circuit current density is at least 2 orders of magnitude larger than those in PLZT reported in previous works. The transparent PLZT and Ni-doped PLZT ferroelectric ceramics are applied as self-powered photodetectors for the first time for 405 nm and near-infrared light, respectively. The devices based on PLZT under 405 nm light exhibit high detectivity (7.15 × 107 Jones) and quick response (9.5 ms for rise and 11.5 ms for decay), and those devices based on Ni-doped PLZT, under near-infrared light filtered from AM 1.5 G simulated sunlight, also exhibit high detectivity (6.86 × 107 Jones) and short response time (8.5 ms), both presenting great potential for future transparent photodetectors.

Design for Highly Piezoelectric and Visible/Near-Infrared Photoresponsive Perovskite Oxides.

Defect-engineered perovskite oxides that exhibit ferroelectric and photovoltaic properties are promising multifunctional materials. Though introducing gap states by transition metal doping on the perovskite B-site can obtain low bandgap (i.e., 1.1-3.8 eV), the electrically leaky perovskite oxides generally lose piezoelectricity mainly due to oxygen vacancies. Therefore, the development of highly piezoelectric ferroelectric semiconductor remains challenging. Here, inspired by point-defect-mediated large piezoelectricity in ferroelectrics especially at the morphotropic phase boundary (MPB) region, an efficient strategy is proposed by judiciously introducing the gap states at the MPB where defect-induced local polar heterogeneities are thermodynamically coupled with the host polarization to simultaneously achieve high piezoelectricity and low bandgap. A concrete example, Ni2+ -mediated (1-x)Na0.5 Bi0.5 TiO3 -xBa(Ti0.5 Ni0.5 )O3-δ (x = 0.02-0.08) composition is presented, which can show excellent piezoelectricity and unprecedented visible/near-infrared light absorption with a lowest ever bandgap ≈0.9 eV at room temperature. In particular, the MPB composition x = 0.05 shows the best ferroelectricity/piezoelectricity (d33 = 151 pC N-1 , Pr = 31.2 µC cm-2 ) and a largely enhanced photocurrent density approximately two orders of magnitude higher compared with classic ferroelectric (Pb,La)(Zr,Ti)O3 . This research provides a new paradigm for designing highly piezoelectric and visible/near-infrared photoresponsive perovskite oxides for solar energy conversion, near-infrared detection, and other multifunctional applications.