RESUMEN
For most imaging systems, there is a trade-off between spatial resolution, temporal resolution, and signal-to-noise ratio. Such a trade-off is particularly severe in single-pixel imaging systems, given the limited throughput of the only one available pixel. Here we report a real-time single-pixel imaging method that can adaptively balance the spatial resolution, temporal resolution, and signal-to-noise ratio of the imaging system according to the changes in the target scene. When scene changes are detected, the dynamic imaging mode will be activated. The temporal resolution will be given high priority and real-time single-pixel imaging will be conducted at a video frame rate (30â frames/s) to visualize the object motion. When no scene changes are detected, the static imaging mode will be activated. The spatial resolution and the signal-to-noise ratio will be progressively built up to resolve fine structures and to improve image quality. The proposed method not only adds practicability to single-pixel imaging, but also generates a new, to the best of our knowledge, insight in data redundancy reduction and information capacity improvement for other computational imaging schemes.
RESUMEN
We propose a differential phase contrast microscopy that enables single-shot phase imaging for unstained biological samples. The proposed approach employs a ring-shaped LED array for polarisation multiplexing illumination and a polarisation camera for image acquisition. As such, multiple images of different polarisation angles can be simultaneously captured with a single shot. Through polarisation demultiplexing, the sample phase can therefore be recovered from the single-shot measurement. Both simulations and experiments demonstrate the effectiveness of the approach. We also demonstrate that ring-shaped illumination enables higher contrast and lower-distortion imaging results than disk-shaped illumination does. The proposed single-shot approach potentially enables phase contrast imaging for live cell samples in vitro. Lay Description: We propose a microscopy that enables imaging of transparent samples, unstained cells, etc. We demonstrate that the proposed method enables higher contrast and lower-distortion imaging results than conventional methods, and significantly improves imaging efficiency. The proposed method potentially enables dynamic imaging for live cell samples in vitro.
RESUMEN
Programmable aperture light-field photography enables the acquisition of angular information without compromising spatial resolution. However, direct current (DC) background noise is unavoidable in images recorded by programmable aperture light-field photography, leading to reducing the contrast of reconstructed images. In addition, it requires sacrificing temporal resolution to obtain angular information, making it a challenge to capture dynamic scenes. In this paper, we propose programmable aperture light-field photography using differential high-speed aperture coding. This method effectively reduces DC noise and produces high-contrast refocused images. Furthermore, we build a light-field camera based on a 1250 Hz spatial light modulator and a 1250 fps high-speed camera, achieving dynamic light-field photography at 1110(H)×800(V) resolution and 24 fps. Our results demonstrate significant improvements in image contrast and exhibit considerable promise for diverse applications.
RESUMEN
Single-pixel microscopy enables observation of micro samples in invisible wave bands. Finding the focus position is essential to capture a clear image of a sample but could be difficult for single-pixel microscopy particularly in invisible wave bands. It is because the structured patterns projected onto the sample would be invisible and searching for the focus position manually could be exhausting. Here, we report an autofocus method for Fourier single-pixel microscopy. The reported method allows one to find the focus position without recording or reconstructing a complete image. The focus position is determined by the magnitude summation of a small number of Fourier coefficients, which enables fast autofocus. The reported method is experimentally demonstrated in imaging various objects in both visible and near-infrared wave bands. The method adds practicability to a single-pixel microscopy.
RESUMEN
Fourier single-pixel imaging (FSI) uses Fourier basis patterns for spatial light modulation to acquire the Fourier spectrum of the object image. The object image can be reconstructed via an inverse Fourier transform. However, the Fourier basis patterns are inherently gray scale, which results in the difficulty that the patterns can hardly be generated at a high speed by using a commonly used spatial light modulator-digital micromirrors device. To tackle this problem, fast FSI, which uses upsampled and dithered Fourier basis patterns to approximate the gray scale patterns, has been reported, but the achievable spatial resolution has to be sacrificed in the pattern upsampling process. Here we propose a method that can achieve not only full-resolution but also full-field-of-view and high-quality FSI. The key to the proposed method is to use a new, to the best of our knowledge, error diffusion dithering algorithm combined with two different scanning strategies to generate two sets of binarized Fourier basis patterns for spatial light modulation. As a result, two images with a sub-pixel shift from each other are reconstructed. It results in the final high-quality reconstruction by synthesizing the two images. We experimentally demonstrate the method can produce a high-quality 1024 × 768-pixel and full resolution image with a digital micromirror device with 1024 × 768 micromirrors.
RESUMEN
Autofocusing is widely used in applications where sharp image acquisition or projection is needed. Here we report an active autofocusing method for sharp image projection. The method works with wide-field structured illumination and single-pixel detection. To find the focus position, the method illuminates the target object with a set of 3-step phase-shifting Fourier basis patterns repeatedly and collects the backscattered light by using a single-pixel detector through a grating. Dual modulation-dynamic modulation by the time-varying structured illumination and static modulation by the grating-embeds the depth information for the target object in the resulting single-pixel measurements. As such, the focus position can be determined by recovering the Fourier coefficients from the single-pixel measurements and searching for the coefficient with the maximum magnitude. High-speed spatial light modulation not only enables rapid autofocusing but also makes the method work even when the lens system is in continuous motion or the focal length of the lens is continuously adjusted. We experimentally validate the reported method in a self-built digital projector and demonstrate the application of the method in Fourier single-pixel imaging.
RESUMEN
LED array microscopes have the advantages of miniaturisation and low cost. It has been demonstrated that LED array microscopes outperform Köhler illumination microscopes in some applications. A LED array allows for a large numerical aperture of illumination. The larger numerical aperture of illumination brings the higher spatial resolution, but the lower image contrast as well. Therefore, there is a tradeoff between resolution and contrast for LED array microscopes. The Fourier ptychographic algorithm can overcome this tradeoff by increasing image contrast without sacrificing spatial resolution. However, the Fourier ptychographic algorithm requires acquisition of multiple images, which is time-consuming and results in live sample imaging challenging. To solve this problem, we develop contrast-enhanced, single-shot LED array microscopy based on the Fourier ptychographic algorithm and deep learning. The sample to be imaged is under illumination by all LEDs of the array simultaneously. The image captured is fed to several trained convolutional neural networks to generate the same number of images that are required by the Fourier ptychographic algorithm. We experimentally present that the image contrast of the final reconstruction is remarkably improved in comparison with the image captured. The proposed method can also produce chromatic-aberration-free results, even when an objective without aberration correction is used. We believe the method might provide live sample imaging with a low-cost approach.
RESUMEN
Multi-angle structured illumination lensless (MASIL) microscopy enables high-resolution image recovery over a large field of view. Successful image recovery of MASIL microscopy, however, relies on an accurate knowledge of the multi-angle illumination. System misalignments and slight deviations from the true illumination angle may result in image artifacts in reconstruction. Here we report a MASIL microscopy system that is robust against illumination misalignment. To calibrate the illumination angles, we design and use a double-sided mask, which is a glass wafer fabricated with a ring-array pattern on the upper surface and a disk-array pattern on the lower surface. As such, the illumination angles can be decoded from the captured images by estimating the relative displacement of the two patterns. We experimentally demonstrate that this system can achieve successful image recovery without any prior knowledge of the illumination angles. The reported approach provides a simple yet robust resolution for wide-field lensless microscopy. It can solve the LED array misalignment problem and calibrate angle-varied illumination for a variety of applications.
RESUMEN
Fourier single-pixel imaging (FSI) allows an image to be reconstructed by acquiring the Fourier spectrum of the image using a single-pixel detector. Fast FSI is typically achieved by acquiring a truncated Fourier spectrum, that is, only low-frequency Fourier coefficients are acquired, with the high-frequency coefficients discarded. However, the truncation of the Fourier spectrum leads to undesirable ringing artifacts in the resulting image. Ringing artifacts produce false edges in the image and reduce the image contrast, resulting in image quality degeneration. The artifact is particularly severe in dynamic FSI, where the sampling ratio is generally ultra-low. We propose an effective and fast deringing algorithm to achieve ringing-free fast FSI. The algorithm eliminates ringing artifacts through 2D sub-pixel shifting and preserves image details through image fusion. Both static and dynamic imaging results demonstrate that the proposed method can reconstruct ringing-free images from under-sampled data in FSI. The deringing algorithm not only provides FSI with the capability of fast high-quality single-pixel imaging but also might prove its applicability in other areas, such as Fourier-based data compression algorithms.
RESUMEN
Lensless microscopy technique enables high-resolution image recovery over a large field of view. By integrating the concept of phase retrieval, it can also retrieve the lost phase information from intensity-only measurements. Here we report a mask-modulated lensless imaging platform based on translated structured illumination. In the reported platform, we sandwich the object in-between a coded mask and a naked image sensor for lensless data acquisition. An LED array is used to provide angle-varied illumination for projecting a translated structured pattern without involving mechanical scanning. For different LED elements, we acquire the lensless intensity data for recovering the complex-valued object. In the reconstruction process, we employ the regularized ptychographic iterative engine and implement an up-sampling process in the reciprocal space. As demonstrated by experimental results, the reported platform is able to recover complex-valued object images with higher resolution and better quality than previous implementations. Our approach may provide a cost-effective solution for high-resolution and wide field-of-view ptychographic imaging without involving mechanical scanning.
RESUMEN
Object classification generally relies on image acquisition and subsequent analysis. Real-time classification of fast-moving objects is a challenging task. Here we propose an approach for real-time classification of fast-moving objects without image acquisition. The key to the approach is to use structured illumination and single-pixel detection to acquire the object features directly. A convolutional neural network (CNN) is trained to learn the object features. The "learned" object features are then used as structured patterns for structured illumination. Object classification can be achieved by picking up the resulting light signals by a single-pixel detector and feeding the single-pixel measurements to the trained CNN. In our experiments, we show that accurate and real-time classification of fast-moving objects can be achieved. Potential applications of the proposed approach include rapid classification of flowing cells, assembly-line inspection, and aircraft classification in defense applications. Benefiting from the use of a single-pixel detector, the approach might be applicable for hidden moving object classification.
RESUMEN
Light-field microscopy is a scanless volumetric imaging technique. Conventional color light microscope employs a micro-lens array at the image plane and samples the spatial, angular, and color information by a pixelated two-dimensional (2D) sensor (such as CCD). However, the space bandwidth product of the pixelated 2D sensor is a fixed value determined by its parameters, leading to the trade-offs between the spatial, angular, and color resolutions. In addition, the inherent chromatic aberration of the micro-lens array also reduces the viewing quality. Here we propose full-color light-field microscopy via single-pixel imaging that can distribute the sampling tasks of the spatial, angular, and color information to both illumination and detection sides, rather than condense on the detection side. Therefore, the space bandwidth product of the light-field microscope is increased and the spatial resolution of the reconstructed light-field can be improved. In addition, the proposed method can reconstruct full-color light-field without using a micro-lens array, thereby the chromatic aberration induced by the micro-lens array is avoided. Because distributing the three sampling tasks to both the illumination and detection sides has different possible sampling schemes, we present two sampling schemes and compare their advantages and disadvantages via several experiments. Our work provides insight for developing a high-resolution full-color light-field microscope. It may find potential applications in the biomedical and material sciences.
RESUMEN
Real-time 3-D tracking of a fast-moving object has found important applications in industry, traffic control, sports, biomedicine, defense, etc. However, it is difficult to adopt typical image-based object tracking systems in a fast-moving object tracking in real time and for a long duration, because reliable and robust image processing and analysis algorithms are often computationally exhausted, and limited storage and bandwidth can hardly fulfill the great demand of high-speed photography. Here we report an image-free 3-D tracking approach. The approach uses only two single-pixel detectors and a high-speed spatial light modulator for data acquisition. By illuminating the target moving object with six single-period Fourier basis patterns, the approach is able to analytically calculate the position of the object with the corresponding single-pixel measurements. The approach is low-cost, and data- and computation-efficient. We experimentally demonstrate that the proposed approach can detect and track a fast-moving object at a frame rate of 1666 frames per second by using a 10,000 Hz digital micromirror device. Benefiting from the wide working spectrum of single-pixel detectors, the reported approach might be applicable for hidden fast-moving object tracking.
RESUMEN
Single-pixel imaging is a novel, to the best of our knowledge, computational imaging scheme, but a large number of measurements are typically required in data acquisition. Full-color single-pixel imaging takes many more measurements than does monochromatic single-pixel imaging. Utilizing the fact that human eyes have a poorer spatial resolution to blues than reds and greens, we propose to sample the blue component of color images with an ultra-low sampling ratio so as to reduce the number of measurements. We demonstrate our method with simulations and experiments, concluding that 95% of the measurements can be reduced in the acquisition of the blue component of natural color images in the size of 256×256 pixels, and the resulting images are without remarkable visual loss. Moreover, utilizing the sparsity of natural images, the sampling ratios of the red and green components can be reduced to 15% and 50%, respectively. This Letter may generate a new insight of how to optimize the imaging efficiency by utilizing human vision properties. The proposed method can be adopted by other full-color computational imaging techniques.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Visión Ocular , Color , HumanosRESUMEN
Differential measurement has strong anti-interference ability. We report the first, to the best of our knowledge, experimental demonstration of differential self-mixing interference signals using a randomly polarized laser for differential self-mixing interferometry (SMI). In the differential SMI system, the detection light can be divided into interference signals of $p$p-polarized and $s$s-polarized light with identical intensity and pi-shift phase difference. By exploiting such a new experimental phenomenon, we propose a noise-robust and low-cost self-mixing interferometer. Experiments show that the proposed approach can effectively suppress both periodic and aperiodic noise. Thus, the reported phenomenon and approach has a good application prospect in self-mixing interferometers.
RESUMEN
The existing lens correction methods deal with the distortion correction by one or more specific image distortion models. However, distortion determination may fail when an unsuitable model is used. So, methods based on the distortion model would have some drawbacks. A model-free lens distortion correction based on the phase analysis of fringe-patterns is proposed in this paper. Firstly, the mathematical relationship of the distortion displacement and the modulated phase of the sinusoidal fringe-pattern are established in theory. By the phase demodulation analysis of the fringe-pattern, the distortion displacement map can be determined point by point for the whole distorted image. So, the image correction is achieved according to the distortion displacement map by a model-free approach. Furthermore, the distortion center, which is important in obtaining an optimal result, is measured by the instantaneous frequency distribution according to the character of distortion automatically. Numerical simulation and experiments performed by a wide-angle lens are carried out to validate the method.
RESUMEN
Single-pixel imaging commonly uses a spatial light modulator (SLM) to encode a scene's spatial information into a one-dimensional light signal sequence so that a single-pixel detector can be used to capture a scene. Digital micromirror device, liquid crystal on silicon, or light emitted diode matrix is a common choice of SLM, but it requires a certain lens system in order to project the structured light pattern that is generated by the SLM onto the scene. Using a lens would not only lead to aberration but also result in difficulty for establishing a compact imaging system. Therefore, we propose to use a liquid crystal display (LCD) as an intensity-only SLM to conduct structured illumination. As such, single-pixel imaging can be performed in a lensless way. As an instance of the proposed technique, a small-size and multi-functional scanner is designed and established to prove the lensless single-pixel imaging concept. As experimentally demonstrated, the single-pixel scanner can not only achieve grayscale and true-color scanning as a typical scanner does, but also achieve distinctive functionalities, such as accurate optical character recognition from under-sampled data, on-the-fly encryption, and genuine document identification. This compact scanner is as thin as 2.48 millimeters. The proposed lensless single-pixel imaging technique might find applications in various fields.
RESUMEN
Real-time detection and tracking for fast moving object has important applications in various fields. However, available methods, especially low-cost ones, can hardly achieve real-time and long-duration object detection and tracking. Here we report an image-free and cost-effective method for detecting and tracking a fast moving object in real time and for long duration. The method employs a spatial light modulator and a single-pixel detector for data acquisition. It uses Fourier basis patterns to illuminate the target moving object and collects the resulting light signal with a single-pixel detector. The proposed method is able to detect and track the object with the single-pixel measurements directly without image reconstruction. The detection and tracking algorithm of the proposed method is computationally efficient. We experimentally demonstrate that the method can achieve a temporal resolution of 1,666 frames per second by using a 10,000 Hz digital micro-mirror device. The latency time of the method is on the order of microseconds. Additionally, the method acquires only 600 bytes of data for each frame. The method therefore allows fast moving object detection and tracking in real time and for long duration. This image-free approach might open up a new avenue for spatial information acquisition in a highly efficient manner.
RESUMEN
Reflected light microscope is a tool for imaging opaque specimens. However, most of the existing reflected light microscopes can only obtain the two-dimensional image of the specimen. Here we demonstrate that with the help of single-pixel imaging, we can develop a reflection light-field microscopy for volumetric imaging. Importantly, using single-pixel imaging, we can digitally adjust the size of the aperture diaphragm of the proposed reflection light-field microscope for changing the depth of field and for achieving three-dimensional differential phase-contrast imaging in an arbitrary direction, without a hardware change. Our approach may benefit various reflective specimens with wide depth information in the semiconductor industry and material science.
RESUMEN
Measurement of steep acylindrical surface has the difficulty with respect to its large localized slope, which may lead to irresolvable fringe densities in off-axis subapertures. To address this problem, we analyze the departure of off-axis acylindrical subapertures, and propose a measurement strategy by yawing the cylinder null. When the cylinder null is yawed with different angles, variable mounts of acylindrical wavefronts are generated to compensate most of the aberrations for different off-axis subapertures. Thus, the fringe densities are drastically reduced within the vertical dynamic range of interferometers. To connect all subaperture together, we also propose an acylindrical stitching approach. Experimental results demonstrate that an acylindrical lens with a departure of up to 81µm from the best-fitting cylinder can be measured using the proposed method. More importantly, it does not require an additional reconfigurable optical null, making the measurement system simple and inexpensive.