Dislocation-induced stop-and-go kinetics of interfacial transformations.

Most engineering materials are based on multiphase microstructures produced either through the control of phase equilibria or by the fabrication of different materials as in thin-film processing. In both processes, the microstructure relaxes towards equilibrium by mismatch dislocations (or geometric misfit dislocations) across the heterophase interfaces1-5. Despite their ubiquitous presence, directly probing the dynamic action of mismatch dislocations has been unachievable owing to their buried nature. Here, using the interfacial transformation of copper oxide to copper as an example, we demonstrate the role of mismatch dislocations in modulating oxide-to-metal interfacial transformations in an intermittent manner, by which the lateral flow of interfacial ledges is pinned at the core of mismatch dislocations until the dislocation climbs to the new oxide/metal interface location. Together with atomistic calculations, we identify that the pinning effect is associated with the non-local transport of metal atoms to fill vacancies at the dislocation core. These results provide mechanistic insight into solid-solid interfacial transformations and have substantial implications for utilizing structural defects at buried interfaces to modulate mass transport and transformation kinetics.

Tuning the surface reactivity of oxides by peroxide species.

The Mars-van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.

Composition-dependent ordering transformations in Pt-Fe nanoalloys.

SignificanceDynamically understanding the microscopic processes governing ordering transformations has rarely been attained. The situation becomes even more challenging for nanoscale alloys, where the significantly increased surface-area-to-volume ratio not only opens up a variety of additional freedoms to initiate an ordering transformation but also allows for kinetic interplay between the surface and bulk due to their close proximity. We provide direct evidence of the microscopic processes controlling the ordering transformation through the surface-bulk interplay in Pt-Fe nanoalloys and new features rendered by variations in alloy composition and chemical stimuli. These results provide a mechanistic detail of ordering transformation phenomena which are widely relevant to nanoalloys as chemical ordering occurs in most multicomponent materials under suitable environmental bias.

Randomly Layered Superstructure of In2O3 Truncated Nano-Octahedra and Its High-Pressure Behavior.

This study outlines the preparation and characterization of a unique superlattice composed of indium oxide (In2O3) vertex-truncated nano-octahedra, along with an exploration of its response to high-pressure conditions. Transmission electron microscopy and scanning transmission electron microscopy were employed to determine the average circumradius (15.2 nm) of these vertex-truncated building blocks and their planar superstructure. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined using synchrotron-based wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice composed of random layers in alignment with a p31m planar symmetry as discerned by SAXS. Notably, the SAXS data also unveiled a pressure-induced, irreversible translation of octahedra and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation of the superlattice cell parameter induced by pressure. This research signifies a noteworthy advancement in deciphering the intricate behaviors of 2D superlattices under a high pressure.

Atomic Dynamics of Multi-Interfacial Migration and Transformations.

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H2 gas, a reaction pathway of CuO → monoclinic m-Cu4 O3 → Cu2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu2 O/m-Cu4 O3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu4 O3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu2 O and m-Cu4 O3 , and activate the interfacial transformations. These results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

Sex differences in mortality and liver-related events in non-alcoholic fatty liver disease: A systematic review and meta-analysis.

BACKGROUND & AIMS: Many systematic reviews explore the association of non-alcoholic fatty liver disease (NAFLD) with mortality, but none of them explores sex-based differences in detail. We aimed to assess whether NAFLD is associated with cause-specific mortality, all-cause mortality, and cancer incidence in both men and women. METHODS: The PubMed, Embase, and Medline databases were searched from inception through April 2023 for eligible studies. We separately pooled relative risks (RRs) for men and women using a random effects model. Subsequently, the RRs and 95% CIs (confidence intervals) in each study were used to calculate the women-to-men ratio of RRs (RRR). Furthermore, subgroup analyses were performed to explore the robustness of outcomes. The random-effects model was employed to conduct sensitivity analyses to determine the impact of specific studies on the overall findings. RESULTS: The meta-analysis included nine cohort studies comprising 557 614 patients with NAFLD were chosen. Women were 44% more likely than men to get cancer among those with NAFLD (RRR: 1.44; 95% CI: 1.02-2.04; p = .039). However, no sex-related differences were observed between NAFLD and all-cause mortality (RRR: 1.06; 95% CI: 0.56-2.01; p = .861), liver-related mortality (RRR: 1.06; 95% CI: 0.02-69.82; p = .977), cardiovascular mortality (RRR: 1; 95% CI: 0.65-1.53; p = .987) and liver cancer (RRR: 0.76; 95% CI: 0.43-1.36; p = .36). CONCLUSIONS: There may be sex variations between NAFLD and the risk of cancer, with the connection being stronger in females than in males.

Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation.

Layered lithium transition metal oxides derived from LiMO2 (M = Co, Ni, Mn, etc.) have been widely adopted as the cathodes of Li-ion batteries for portable electronics, electric vehicles, and energy storage. Oxygen loss in the layered oxides is one of the major factors leading to cycling-induced structural degradation and its associated fade in electrochemical performance. Herein, we review recent progress in understanding the phenomena of oxygen loss and the resulting structural degradation in layered oxide cathodes. We first present the major driving forces leading to the oxygen loss and then describe the associated structural degradation resulting from the oxygen loss. We follow this analysis with a discussion of the kinetic pathways that enable oxygen loss, and then we address the resulting electrochemical fade. Finally, we review the possible approaches toward mitigating oxygen loss and the associated electrochemical fade as well as detail novel analytical methods for probing the oxygen loss.

Improving Oxygen Reduction Performance of Surface-Layer-Controlled Pt-Ni Nano-Octahedra via Gaseous Etching.

This study demonstrates an atomic composition manipulation on Pt-Ni nano-octahedra to enhance their electrocatalytic performance. By selectively extracting Ni atoms from the {111} facets of the Pt-Ni nano-octahedra using gaseous carbon monoxide at an elevated temperature, a Pt-rich shell is formed, resulting in an ∼2 atomic layer Pt-skin. The surface-engineered octahedral nanocatalyst exhibits a significant enhancement in both mass activity (∼1.8-fold) and specific activity (∼2.2-fold) toward the oxygen reduction reaction compared with its unmodified counterpart. After 20,000 potential cycles of durability tests, the surface-etched Pt-Ni nano-octahedral sample shows a mass activity of 1.50 A/mgPt, exceeding the initial mass activity of the unetched counterpart (1.40 A/mgPt) and outperforming the benchmark Pt/C (0.18 A/mgPt) by a factor of 8. DFT calculations predict this improvement with the Pt surface layers and support these experimental observations. This surface-engineering protocol provides a promising strategy for developing novel electrocatalysts with improved catalytic features.

Atomistic Origins of Reversible Noncatalytic Gas-Solid Interfacial Reactions.

Noncatalytic gas-solid reactions are a large group of heterogeneous reactions that are usually assumed to occur irreversibly because of the strong driving force to favor the forward direction toward the product formation. Using the example of Ni oxidation into NiO with CO2, herein, we demonstrate the existence of the reverse element that results in the NiO reduction from the countering effect of the gaseous product of CO. Using in situ electron microscopy observations and atomistic modeling, we show that the oxidation process occurs via preferential CO2 adsorption along step edges that results in step-flow growth of NiO layers, and the presence of Ni atoms on the flat NiO surface promotes the nucleation of NiO layers. Simultaneously, the NiO reduction happens via preferential step-edge adsorption of CO that leads to the receding motion of atomic steps, and the presence of Ni vacancies in the NiO surface facilitates the CO-adsorption-induced surface pitting. Temperature and CO2 pressure effect maps are constructed to illustrate the spatiotemporal dynamics of the competing NiO redox reactions. These results demonstrate the rich gas-solid surface reaction dynamics induced by the coexisting forward and reverse reaction elements and have practical applicability in manipulating gas-solid reactions via controlling the gas environment or atomic structure of the solid surface to steer the reaction toward the desired direction.

Synthesis of Core@Shell Cu-Ni@Pt-Cu Nano-Octahedra and Their Improved MOR Activity.

Fabrication of 3d metal-based core@shell nanocatalysts with engineered Pt-surfaces provides an effective approach for improving the catalytic performance. The challenges in such preparation include shape control of the 3d metallic cores and thickness control of the Pt-based shells. Herein, we report a colloidal seed-mediated method to prepare octahedral CuNi@Pt-Cu core@shell nanocrystals using CuNi octahedral cores as the template. By precisely controlling the synthesis conditions including the deposition rate and diffusion rate of the shell-formation through tuning the capping ligand, reaction temperature, and heating rate, uniform Pt-based shells can be achieved with a thickness of <1 nm. The resultant carbon-supported CuNi@Pt-Cu core@shell nano-octahedra showed superior activity in electrochemical methanol oxidation reaction (MOR) compared with the commercial Pt/C catalysts and carbon-supported CuNi@Pt-Cu nano-polyhedron counterparts.

Tuning the surface composition of Cu3Au binary alloy.

Using ambient-pressure X-ray photoelectron spectroscopy, here we report the real-time monitoring of dynamic surface composition evolution of Cu3Au(100) in response to the imposed environmental stimuli. Segregation of Au to the pristine surface under ultrahigh vacuum annealing leads to the phase separation with pure Au at the surface and alloyed Au in the subsurface. Upon switching to an oxidizing atmosphere, oxygen adsorption drives the surface segregation of Cu along with inward migration of pure Au to the subsurface. Switching to a H2 atmosphere results in oxygen loss from the oxygenated surface, thereby promoting Au surface segregation and reverting the surface to the pristine state with the Au termination. These measurements demonstrated the tunability of the surface composition of the binary alloy by utilizing the interplay between the tendency of segregating a more noble constituent to the surface and the tendency to segregate the more reactive one with the chemical stimuli.

Ultra-Microtome for the Preparation of TEM Specimens from Battery Cathodes.

With the wide application of ultra-microtome sectioning in the preparation of transmission electron microscopy (TEM) specimens with bio- and organic materials, here, we report an ultra-microtome-based method for the preparation of TEM specimens from cathodes of Li-ion batteries. The ultra-microtome sectioning reduces the sample thickness to tens of nanometers and yields atomic resolution from the core region of particles of hundreds of nanometers. Analysis indicates that the mechanical cross-sectioning introduces no observable microstructural artifacts or structural damage, such as microcracking and nanoporosity. These results demonstrate the high efficiency of the ultra-microtome approach in preparing well-thinned specimens of particulate materials that allow for atomic-scale TEM imaging of a large number of sectioned particles in one single TEM specimen, thereby providing statistically significant results of the TEM analysis.

Atomic-Scale Mechanism of Unidirectional Oxide Growth.

A fundamental knowledge of the unidirectional growth mechanisms is required for precise control on size, shape, and thereby functionalities of nanostructures. The oxidation of many metals results in oxide nanowire growth with a bicrystal grain boundary along the axial direction. Using transmission electron microscopy that spatially and temporally resolves CuO nanowire growth during the oxidation of copper, here we provide direct evidence of the correlation between unidirectional crystal growth and bicrystal grain boundary diffusion. Based on atomic scale observations of the upward growth at the nanowire tip, oscillatory downward growth of atomic layers on the nanowire sidewall and the parabolic kinetics of lengthening, bicrystal grain boundary diffusion is the mechanism by which Cu ions are delivered from the nanowire root to the tip. Together with density-functional theory calculations, we further show that the asymmetry in the corner-crossing barriers promotes the unidirectional oxide growth by hindering the transport of Cu ions from the nanowire tip to the sidewall facets. We expect the broader applicability of these results in manipulating the growth of nanostructured oxides by controlling the bicrystal grain boundary structure that favors anisotropic diffusion for unidirectional, one-dimensional crystal growth for nanowires or isotropic diffusion for two-dimensional platelet growth.

Atomic origins of water-vapour-promoted alloy oxidation.

The presence of water vapour, intentional or unavoidable, is crucial to many materials applications, such as in steam generators, turbine engines, fuel cells, catalysts and corrosion1-4. Phenomenologically, water vapour has been noted to accelerate oxidation of metals and alloys5,6. However, the atomistic mechanisms behind such oxidation remain elusive. Through direct in situ atomic-scale transmission electron microscopy observations and density functional theory calculations, we reveal that water-vapour-enhanced oxidation of a nickel-chromium alloy is associated with proton-dissolution-promoted formation, migration, and clustering of both cation and anion vacancies. Protons derived from water dissociation can occupy interstitial positions in the oxide lattice, consequently lowering vacancy formation energy and decreasing the diffusion barrier of both cations and anions, which leads to enhanced oxidation in moist environments at elevated temperatures. This work provides insights into water-vapour-enhanced alloy oxidation and has significant implications in other material and chemical processes involving water vapour, such as corrosion, heterogeneous catalysis and ionic conduction.

Dislocation nucleation facilitated by atomic segregation.

Surface segregation-the enrichment of one element at the surface, relative to the bulk-is ubiquitous to multi-component materials. Using the example of a Cu-Au solid solution, we demonstrate that compositional variations induced by surface segregation are accompanied by misfit strain and the formation of dislocations in the subsurface region via a surface diffusion and trapping process. The resulting chemically ordered surface regions acts as an effective barrier that inhibits subsequent dislocation annihilation at free surfaces. Using dynamic, atomic-scale resolution electron microscopy observations and theory modelling, we show that the dislocations are highly active, and we delineate the specific atomic-scale mechanisms associated with their nucleation, glide, climb, and annihilation at elevated temperatures. These observations provide mechanistic detail of how dislocations nucleate and migrate at heterointerfaces in dissimilar-material systems.

MicroRNA-191 acts as a tumor promoter by modulating the TET1-p53 pathway in intrahepatic cholangiocarcinoma.

Current treatment of intrahepatic cholangiocarcinoma (ICC) remains ineffective because knowledge of ICC carcinogenesis is unclear. Increasing evidence suggests that microRNAs (miRNAs), including miR-191, play an important role in tumorigenesis; but expression and biological functions of miR-191 in ICC remain to be established. This study investigated the functions and underlying mechanisms of miR-191 in ICC. ICC miRNA profiles were generated in five pairs of ICC and matched to normal bile duct tissues by next-generation sequencing technology; ICC miRNA profiles were verified in 18 pairs of ICC tissues and normal bile duct tissues by quantitative RT-PCR. The miR-191-associated mechanisms in ICC were investigated in vitro and in vivo, and clinical outcomes associated with miR-191 were correlated in 84 patients. Our results showed that miR-191 expression was significantly increased in ICC compared with the adjacent normal bile duct tissues (P < 0.001). Overexpression of miR-191 promoted proliferation, invasion, and migration of cholangiocarcinoma cells in vitro and in vivo. The elevated miR-191 expression reduced the expression level of ten-eleven translocation 1 (TET1)-a direct target gene of miR-191 in ICC, which catalyzes demethylation. The reduced TET1 expression level allowed the methylated CpG-rich regions at the p53 gene transcription start site stay methylated, leading to reduced p53 expression level, which compromises p53's anticancer vigor. Finally, miR-191 was found to be an independent risk factor for poor prognosis in patients with ICC (overall survival, hazard ratio = 3.742, 95% confidence interval 2.080-6.733, P < 0.001; disease-free survival, hazard ratio = 2.331, 95% confidence interval 1.346-4.037, P = 0.003). CONCLUSION: Our results suggest that overexpressed miR-191 is associated with ICC progression through the miR-191/TET1/p53 pathway. (Hepatology 2017;66:136-151).

Oxidation-driven surface dynamics on NiAl(100).

Atomic steps, a defect common to all crystal surfaces, can play an important role in many physical and chemical processes. However, attempts to predict surface dynamics under nonequilibrium conditions are usually frustrated by poor knowledge of the atomic processes of surface motion arising from mass transport from/to surface steps. Using low-energy electron microscopy that spatially and temporally resolves oxide film growth during the oxidation of NiAl(100) we demonstrate that surface steps are impermeable to oxide film growth. The advancement of the oxide occurs exclusively on the same terrace and requires the coordinated migration of surface steps. The resulting piling up of surface steps ahead of the oxide growth front progressively impedes the oxide growth. This process is reversed during oxide decomposition. The migration of the substrate steps is found to be a surface-step version of the well-known Hele-Shaw problem, governed by detachment (attachment) of Al atoms at step edges induced by the oxide growth (decomposition). By comparing with the oxidation of NiAl(110) that exhibits unimpeded oxide film growth over substrate steps we suggest that whenever steps are the source of atoms used for oxide growth they limit the oxidation process; when atoms are supplied from the bulk, the oxidation rate is not limited by the motion of surface steps.

Comparative Study of the Oxidation of NiAl(100) by Molecular Oxygen and Water Vapor Using Ambient-Pressure X-ray Photoelectron Spectroscopy.

The oxidation behavior of NiAl(100) by molecular oxygen and water vapor under a near-ambient pressure of 0.2 Torr is monitored using ambient-pressure X-ray photoelectron spectroscopy. O2 exposure leads to the selective oxidation of Al at temperatures ranging from 40 to 500 °C. By contrast, H2O exposure results in the selective oxidation of Al at 40 and 200 °C, and increasing the oxidation temperature above 300 °C leads to simultaneous formation of both Al and Ni oxides. These results demonstrate that the O2 oxidation forms a nearly stoichiometric Al2O3 structure that provides improved protection to the metallic substrate by barring the outward diffusion of metals. By contrast, the H2O oxidation results in the formation of a defective oxide layer that allows outward diffusion of Ni at elevated temperatures for simultaneous NiO formation.

Optimal combination of gemcitabine, sorafenib, and S-1 shows increased efficacy in treating cholangiocarcinoma in vitro and in vivo.

Cholangiocarcinoma (CCA) is one of the most difficult cancers to treat and lacks an established standard chemotherapy regimen. This study evaluated the effects of different combinations of gemcitabine, sorafenib, and S-1 on CCA cells to identify the optimal drug combination. A fractional factorial design method was applied in drug combination experiments to determine the optimal combination of these three drugs (gemcitabine=1.4 mmol/l, sorafenib=0.03 mmol/l, S-1=0.185 mmol/l). We constructed a mathematical model with a small number of runs (Y=1.14-0.377A-23.0B-1.81C+0.084A+109B+6.06C+3.83AB+0.175AC-40.4BC) to predict the efficacy of combinations of the drugs. The optimal combination can significantly inhibit the AKT/mTOR pathway, and thus CCA cell proliferation, and can induce cell apoptosis. In vivo, this combination (gemcitabine=1.4 mmol/l, sorafenib=0.03 mmol/l, S-1=0.185 mmol/l) can significantly inhibit tumor growth. The present study showed that the mathematical model was reliable and could predict the efficacy of the different drug combinations. The optimal combination of these drugs may aid the development of a promising standard chemotherapy regimen for CCA.

What Happens to LiMnPO4 upon Chemical Delithiation?

Olivine MnPO4 is the delithiated phase of the lithium-ion-battery cathode (positive electrode) material LiMnPO4, which is formed at the end of charge. This phase is metastable under ambient conditions and can only be produced by delithiation of LiMnPO4. We have revealed the manganese dissolution phenomenon during chemical delithiation of LiMnPO4, which causes amorphization of olivine MnPO4. The properties of crystalline MnPO4 obtained from carbon-coated LiMnPO4 and of the amorphous product resulting from delithiation of pure LiMnPO4 were studied and compared. The phosphorus-rich amorphous phases in the latter are considered to be MnHP2O7 and MnH2P2O7 from NMR, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analysis. The thermal stability of MnPO4 is significantly higher under high vacuum than at ambient condition, which is shown to be related to surface water removal.