Mycoplasma gallisepticum produces a histone-like protein that recognizes base mismatches in DNA.

Mycoplasmas are the smallest known microorganisms, with drastically reduced genome sizes. One of the essential biochemical pathways lost in mycoplasmas is methylation-mediated DNA repair (MMR), which is responsible for correction of base substitutions, insertions, and deletions in both bacteria and higher organisms. We found that the histone-like protein encoded by the himA/hup_2 gene of Mycoplasma gallisepticum (mgHU) recognizes typical MMR substrates, in contrast to homologues from other species. The recognition of substitution mismatches is sequence-dependent, with affinities decreasing in the following order: CC > CT = TT > AA = AC. Insertions or deletions of one nucleotide are also specifically recognized with the following sequence-dependent preference: A = T > C. One-nucleotide lesions involving guanine are bound only weakly, and this binding is indistinguishable from binding to intact DNA. Although mgHU is dissimilar to Escherichia coli HU, expression in a slow-growing hupAB E. coli strain restores wild-type growth. The results indicate that mgHU executes all essential functions of bacterial architectural proteins. The origin and the possible role of enhanced specificity for typical MMR substrates are discussed.

Effect of Thermomechanical Treatment on Structure and Functional Fatigue Characteristics of Biodegradable Fe-30Mn-5Si (wt %) Shape Memory Alloy.

The Fe-Mn-Si shape memory alloys are considered promising materials for the biodegradable bone implant application since their functional properties can be optimized to combine bioresorbability with biomechanical and biochemical compatibility with bone tissue. The present study focuses on the fatigue and corrosion fatigue behavior of the thermomechanically treated Fe-30Mn-5Si (wt %) alloy compared to the conventionally quenched alloy because this important functionality aspect has not been previously studied. Hot-rolled and water-cooled, cold-rolled and annealed, and conventionally quenched alloy samples were characterized by X-ray diffraction, transmission electron microscopy, tensile fatigue testing in air atmosphere, and bending corrosion fatigue testing in Hanks' solution. It is shown that hot rolling at 800 °C results in the longest fatigue life of the alloy both in air and in Hanks' solution. This advantage results from the formation of a dynamically recrystallized γ-phase grain structure with a well-developed dislocation substructure. Another important finding is the experimental verification of Young's modulus anomalous temperature dependence for the studied alloy system, its minimum at a human body temperature, and corresponding improvement of the biomechanical compatibility. The idea was realized by lowering Ms temperature down to the body temperature after hot rolling at 800 °C.

Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants.

Metastable near-beta Ti-21.8Nb-6Zr and Ti-19.7Nb-5.8Ta (at%) alloys were subjected to a thermomechanical treatment comprising cold rolling (CR) with a true strain of e = 0.3 and post-deformation annealing (PDA) in the 500-900°C temperature range to ensure the superelastic behavior which is important for bone implants. It was found that PDA resulted in formation of about 1-2 µm-thick oxide layer on the Ti-Nb-Zr and Ti-Nb-Ta alloy samples; the layer was mainly composed of TiO2 , in rutile and anatase modifications. The structure, the phase and chemical compositions, and some surface-sensitive properties of the alloys were compared to those of Ti-50.7Ni and Ti-Grade2 reference materials. These surface layers (especially that of the Ti-Nb-Zr alloy) demonstrated a promising combination of high cohesion strength (load causing surface layer fracture is over 25 N), hardness (∼12 GPa), and hydrophilicity (contact angle ∼40°). Surface modification by controlled oxidation during air annealing increases corrosion resistance and enhances in vivo osteoinductive properties of Ti-Nb-Zr alloys by changing the surface microrelief, increasing the surface wettability, and improving the mechanical characteristics, thus laying the foundation for the development of medical implants with prolonged service life. So, it was confirmed that the same thermomechanical treatment, which creates conditions for the superelastic behavior of the bulk metal (CR: e = 0.3 + PDA = 500-700°C for 1 hr), would also create a strong, protective and biocompatible layer on the implant surface.

The Electrochemical and Mechanical Behavior of Bulk and Porous Superelastic Ti‒Zr-Based Alloys for Biomedical Applications.

Titanium alloys are well recognized as appropriate materials for biomedical implants. These devices are designed to operate in quite aggressive human body media, so it is important to study the corrosion and electrochemical behavior of the novel materials alongside the underlying chemical and structural features. In the present study, the prospective Ti‒Zr-based superelastic alloys (Ti-18Zr-14Nb, Ti-18Zr-15Nb, Ti-18Zr-13Nb-1Ta, atom %) were analyzed in terms of their phase composition, functional mechanical properties, the composition and structure of surface oxide films, and the corresponding corrosion and electrochemical behavior in Hanks' simulated biological solution. The electrochemical parameters of the Ti-18Zr-14Nb material in bulk and foam states were also compared. The results show a significant difference in the functional performance of the studied materials, with different composition and structure states. In particular, the positive effect of the thermomechanical treatment regime, leading to the formation of a favorable microstructure on the corrosion resistance, has been revealed. In general, the Ti-18Zr-15Nb alloy exhibits the optimum combination of functional characteristics in Hanks' solution, while the Ti-18Zr-13Nb-1Ta alloy shows the highest resistance to the corrosion environment. The Ti-18Zr-14Nb-based foam material exhibits slightly lower passivation kinetics as compared to its bulk equivalent.

Cell Guidance on Nanostructured Metal Based Surfaces.

Metal surface nanostructuring to guide cell behavior is an attractive strategy to improve parts of medical implants, lab-on-a-chip, soft robotics, self-assembled microdevices, and bionic devices. Here, we discus important parameters, relevant trends, and specific examples of metal surface nanostructuring to guide cell behavior on metal-based hybrid surfaces. Surface nanostructuring allows precise control of cell morphology, adhesion, internal organization, and function. Pre-organized metal nanostructuring and dynamic stimuli-responsive surfaces are used to study various cell behaviors. For cells dynamics control, the oscillating stimuli-responsive layer-by-layer (LbL) polyelectrolyte assemblies are discussed to control drug delivery, coating thickness, and stiffness. LbL films can be switched "on demand" to change their thickness, stiffness, and permeability in the dynamic real-time processes. Potential applications of metal-based hybrids in biotechnology and selected examples are discussed.

Ultrasound-driven titanium modification with formation of titania based nanofoam surfaces.

Titanium has been widely used as biomaterial for various medical applications because of its mechanical strength and inertness. This on the other hand makes it difficult to structure it. Nanostructuring can improve its performance for advanced applications such as implantation and lab-on-chip systems. In this study we show that a titania nanofoam on titanium can be formed under high intensity ultrasound (HIUS) treatment in alkaline solution. The physicochemical properties and morphology of the titania nanofoam are investigated in order to find optimal preparation conditions for producing surfaces with high wettability for cell culture studies and drug delivery applications. AFM and contact angle measurements reveal, that surface roughness and wettability of the surfaces depend nonmonotonously on ultrasound intensity and duration of treatment, indicating a competition between HIUS induced roughening and smoothening mechanisms. We finally demonstrate that superhydrophilic bio-and cytocompatible surfaces can be fabricated with short time ultrasonic treatment.

The Role of Titanium Surface Nanostructuring on Preosteoblast Morphology, Adhesion, and Migration.

Surface structuring of titanium-based implants is known to modulate the behavior of adherent cells, but the influence of different nanotopographies is poorly understood. The aim is to investigate preosteoblast proliferation, adhesion, morphology, and migration on surfaces with similar surface chemistry but distinct nanotopographical features. Sonochemical treatment and anodic oxidation are employed to fabricate disordered, mesoporous titania (TMS) and ordered titania nanotubular (TNT) topographies on titanium, respectively. Morphological evaluation reveals that cells are polygonal and well-spread on TMS, but display an elongated, fibroblast-like morphology on TNT surfaces, while they are much flatter on glass. Both nanostructured surfaces impair cell adhesion, but TMS is more favorable for cell growth due to its support of cell attachment and spreading in contrast to TNT. A quantitative wound healing assay in combination with live-cell imaging reveals that cell migration on TMS surfaces has a more collective character than on other surfaces, probably due to a closer proximity between neighboring migrating cells on TMS. The results indicate distinctly different cell adhesion and migration on ordered and disordered titania nanotopographies, providing important information that can be used in optimizing titanium-based scaffold design to foster bone tissue growth and repair while allowing for the encapsulation of drugs into porous titania layer.

Switching the Stiffness of Polyelectrolyte Assembly by Light to Control Behavior of Supported Cells.

Polyelectrolyte block copolymer micelles assembled thin film is switched in response to local photocatalytic reactions on titanium dioxide, resulting in a layer of variable height, stiffness in response to visible light irradiation. Preosteoblasts migrate toward stiffer side of the substrates.