The behavior of thermally modified wood after exposure in maritime/industrial and urban environments.

Natural and thermally modified Pine, Ash, and Acacia woods were exposed in two different environments: urban and maritime/industrial. The weathering effects were evaluated during 24 months regarding color, chemical, and structural changes. In all wood species, thermal modification induced color, chemical, and structural changes. All woods became darker (Pine ΔL*: -32.01; Ash ΔL*: -36.83; Acacia ΔL*: -27.50), total extractives content increased (Pine: 19 %; Ash: 32 % and Acacia: 18 %), and the samples presented deformation and damaged cells. Total lignin was not significantly changed, although there were detected changes in lignin, namely the reduction of G-units in Pine (≈2 %) and reduction of S/G ratio in Acacia (≈0.04 %). Ash remained almost the same. After weathering, modified woods suffered fewer color changes, indicating that the thermal modification could improve the resistance to color change. Acacia wood, when exposed to maritime/industrial conditions, revealed a higher color change (ΔE: 35.7 at 24 months) when compared with urban conditions (ΔE: 23.5 at 24 months). Delignification, possibly caused by photodegradation, occurred in all wood samples, and the loss of extractive happened, perhaps caused by rain. Modified woods were slightly less resistant to weathering in maritime/industrial environments. Some structural damage, namely cracked cells, the appearance of molds, blue staining, and particle deposition, was observed. The thermal modification enables color stabilization but does not seem to improve the weathering resistance in all studied wood species. Exposure to the different environments did not lead to significant differences in the morphology and chemical composition of the three natural and modified wood species.

Chemical composition of heartwood and sapwood of Tectona grandis characterized by CG/MS-PY.

Teak wood has chemical compounds that can be used for pharmaceutical and textile industries, in addition, this compounds are related to resistance to biodeterioration, color and modification processes. Heartwood and sapwood of T. grandis (teak), 15 years-old, were characterized by Py-CG/MS analysis and syringyl (S)/guaiacyl (G) ratio was evaluated. Heartwood and sapwood were pyrolyzed at 550 °C and 62 and 51 compounds were identified from them, respectively. The acetic acid (10%) and levoglucosan (26.65%) were the most abundant compound in the sapwood and heartwood, respectively. The high acetic acid content enhances the use of teak wood to production of artificial essences for perfumery, paints, dyes. While levoglucosan can be used in the manufacture of epoxy resins, antiparasitic and insecticides. The organic compounds identified include 2-methylanthraquinone as one of the main component responsible for the resistance of the teak wood to biological factors (fungi and termites). The syringyl (S)/guaiacyl (G) ratio of heartwood and sapwood was 0.51 and 0.50, respectively.

Quality of Pinus sp. pellets with kraft lignin and starch addition.

Pellets are widely used for power generation because they use renewable raw material with easy storage, transport and high energy density. However, the structural fragility, disintegrating during handling, transport and storage, is one of the main problems of pellets, but the addition of binders/additives can minimize this fragility. The objective of this study was to evaluate the properties of wood pellets with the addition of starch (corn and wheat) and kraft lignin in different proportions. Pellets were produced with the addition of starch (wheat and corn) and kraft lignin in the proportions of 1, 2, 3, 4 and 5% in relation to the mass of wood particles of Pinus sp., with 12% moisture (dry basis), classified in 3 and 1 mm sieves and compacted in a pelleting press in the laboratory, according to European standard EN 14961-2. Physical and mechanical properties of the pellets were evaluated and their densitometric profiles obtained from the Faxitron LX-60 X-ray equipment. Corn starch and kraft lignin additives at 4% improved pellet properties (density, fines and hardness), reducing their losses during handling, storage and transport.