Protecting an artificial savanna as a nature-based solution to restore carbon and biodiversity in the Democratic Republic of the Congo.

A large share of the global forest restoration potential is situated in artificial 'unstable' mesic African savannas, which could be restored to higher carbon and biodiversity states if protected from human-induced burning. However, uncertainty on recovery rates in protected unstable savannas impedes science-informed forest restoration initiatives. Here, we quantify the forest restoration success of anthropogenic fire exclusion within an 88-ha mesic artificial savanna patch in the Kongo Central province of the Democratic Republic of the Congo (DR Congo). We found that aboveground carbon recovery after 17 years was on average 11.40 ± 0.85 Mg C ha-1 . Using a statistical model, we found that aboveground carbon stocks take 112 ± 3 years to recover to 90% of aboveground carbon stocks in old-growth forests. Assuming that this recovery trajectory would be representative for all unstable savannas, we estimate that they could have a total carbon uptake potential of 12.13 ± 2.25 Gt C by 2100 across DR Congo, Congo and Angola. Species richness recovered to 33.17% after 17 years, and we predicted a 90% recovery at 54 ± 2 years. In contrast, we predicted that species composition would recover to 90% of old-growth forest composition only after 124 ± 3 years. We conclude that the relatively simple and cost-efficient measure of fire exclusion in artificial savannas is an effective nature-based solution to climate change and biodiversity loss. However, more long-term and in situ monitoring efforts are needed to quantify variation in long-term carbon and diversity recovery pathways. Particular uncertainties are spatial variability in socio-economics and growing conditions as well as the effects of projected climate change.

Natural forest regeneration through fire protection is a less imminent threat for truly stable savannas than afforestation.

African bistable savannas have important biodiversity value and merit conservation. At the same time, forest restoration is a nature-based solution that can be used to increase biodiversity, carbon stocks, and human well-being. Here we describe an experiment based on natural forest regeneration through the exclusion of anthropogenic fire. We show that it is easier to let nature do its work instead of channeling it into an artificial man-made ecosystem through human-induced burning or planting. We emphasize that nature-based solutions must be biome-appropriate and the choice between restoring forests or protecting savannas requires a thorough understanding of the local context.

Earlier onset and slower heartwood investment in faster-growing trees of African tropical species.

BACKGROUND AND AIMS: Heartwood plays an important role in maintaining the structural integrity of trees. While, its formation has long be thought to be solely driven by internal ageing processes, more recent hypotheses suggest that heartwood formation acts as a regulator of the tree water balance by modulating sapwood quantities. Testing both hypotheses would shed light on the potential ecophysiological nature of heartwood formation, a very common process in trees. METHODS: We measured heartwood and sapwood quantities, xylem conduits and growth ring width and number on 406 stems of Pericopsis elata with ages ranging from 2 to 237 years. A subset of 17 trees with similar ages but varying growth rate were sampled in a shaded (slower growth) and sun-exposed (faster growth) site. We used regression analysis and structural equations modelling to investigate the dynamics and drivers of heartwood formation. KEY RESULTS: We found a positive effect of growth rate on the probability of heartwood occurrence, suggesting an earlier heartwood onset in faster-growing stems. After this onset age, heartwood area increases with stem diameter and age. Despite the similar heartwood production per unit stem diameter increment, shaded trees produce heartwood faster than sun-exposed trees. Tree age and hydraulics showed similar direct effects on heartwood and sapwood area of sun-exposed trees, suggesting their mutual role in driving the heartwood dynamics of sun-exposed trees. However, for shaded trees, only tree hydraulics showed a direct effect, suggesting its prominent role over age in driving the heartwood dynamics in limited growing conditions. The positive relationship between growth rate and maximum stomatal conductance supports this conclusion. CONCLUSIONS: Heartwood area increases as the tree ages but at a slower rate in trees where water demand is balanced by a sufficient water supply. Our findings suggest that heartwood formation is not only a structural but also a functional process.

Inter-individual variability in spring phenology of temperate deciduous trees depends on species, tree size and previous year autumn phenology.

We explored the inter-individual variability in bud-burst and its potential drivers, in homogeneous mature stands of temperate deciduous trees. Phenological observations of leaves and wood formation were performed weekly from summer 2017 to summer 2018 for pedunculate oak, European beech and silver birch in Belgium. The variability of bud-burst was correlated to previous' year autumn phenology (i.e. the onset of leaf senescence and the cessation of wood formation) and tree size but with important differences among species. In fact, variability of bud-burst was primarily related to onset of leaf senescence, cessation of wood formation and tree height for oak, beech and birch, respectively. The inter-individual variability of onset of leaf senescence was not related to the tree characteristics considered and was much larger than the inter-individual variability in bud-burst. Multi-species multivariate models could explain up to 66% of the bud-burst variability. These findings represent an important advance in our fundamental understanding and modelling of phenology and tree functioning of deciduous tree species.

Environmental drivers interactively affect individual tree growth across temperate European forests.

Forecasting the growth of tree species to future environmental changes requires a better understanding of its determinants. Tree growth is known to respond to global-change drivers such as climate change or atmospheric deposition, as well as to local land-use drivers such as forest management. Yet, large geographical scale studies examining interactive growth responses to multiple global-change drivers are relatively scarce and rarely consider management effects. Here, we assessed the interactive effects of three global-change drivers (temperature, precipitation and nitrogen deposition) on individual tree growth of three study species (Quercus robur/petraea, Fagus sylvatica and Fraxinus excelsior). We sampled trees along spatial environmental gradients across Europe and accounted for the effects of management for Quercus. We collected increment cores from 267 trees distributed over 151 plots in 19 forest regions and characterized their neighbouring environment to take into account potentially confounding factors such as tree size, competition, soil conditions and elevation. We demonstrate that growth responds interactively to global-change drivers, with species-specific sensitivities to the combined factors. Simultaneously high levels of precipitation and deposition benefited Fraxinus, but negatively affected Quercus' growth, highlighting species-specific interactive tree growth responses to combined drivers. For Fagus, a stronger growth response to higher temperatures was found when precipitation was also higher, illustrating the potential negative effects of drought stress under warming for this species. Furthermore, we show that past forest management can modulate the effects of changing temperatures on Quercus' growth; individuals in plots with a coppicing history showed stronger growth responses to higher temperatures. Overall, our findings highlight how tree growth can be interactively determined by global-change drivers, and how these growth responses might be modulated by past forest management. By showing future growth changes for scenarios of environmental change, we stress the importance of considering multiple drivers, including past management and their interactions, when predicting tree growth.

Advanced X-ray CT scanning can boost tree ring research for earth system sciences.

BACKGROUND AND AIMS: Tree rings, as archives of the past and biosensors of the present, offer unique opportunities to study influences of the fluctuating environment over decades to centuries. As such, tree-ring-based wood traits are capital input for global vegetation models. To contribute to earth system sciences, however, sufficient spatial coverage is required of detailed individual-based measurements, necessitating large amounts of data. X-ray computed tomography (CT) scanning is one of the few techniques that can deliver such data sets. METHODS: Increment cores of four different temperate tree species were scanned with a state-of-the-art X-ray CT system at resolutions ranging from 60 µm down to 4.5 µm, with an additional scan at a resolution of 0.8 µm of a splinter-sized sample using a second X-ray CT system to highlight the potential of cell-level scanning. Calibration-free densitometry, based on full scanner simulation of a third X-ray CT system, is illustrated on increment cores of a tropical tree species. KEY RESULTS: We show how multiscale scanning offers unprecedented potential for mapping tree rings and wood traits without sample manipulation and with limited operator intervention. Custom-designed sample holders enable simultaneous scanning of multiple increment cores at resolutions sufficient for tree ring analysis and densitometry as well as single core scanning enabling quantitative wood anatomy, thereby approaching the conventional thin section approach. Standardized X-ray CT volumes are, furthermore, ideal input imagery for automated pipelines with neural-based learning for tree ring detection and measurements of wood traits. CONCLUSIONS: Advanced X-ray CT scanning for high-throughput processing of increment cores is within reach, generating pith-to-bark ring width series, density profiles and wood trait data. This would allow contribution to large-scale monitoring and modelling efforts with sufficient global coverage.

Asynchronous leaf and cambial phenology in a tree species of the Congo Basin requires space-time conversion of wood traits.

BACKGROUND AND AIMS: Wood traits are increasingly being used to document tree performance. In the Congo Basin, however, weaker seasonality causes asynchrony of wood traits between trees. Here, we monitor growth and phenology data to date the formation of traits. METHODS: For two seasons, leaf and cambial phenology were monitored on four Terminalia superba trees (Mayombe) using cameras, cambial pinning and dendrometers. Subsequently, vessel lumen and parenchyma fractions as well as high-resolution isotopes (δ13C/δ18O) were quantified on the formed rings. All traits were dated and related to weather data. KEY RESULTS: We observed between-tree differences in green-up of 45 d, with trees flushing before and after the rainy season. The lag between green-up and onset of xylem formation was 59 ± 21 d. The xylem growing season lasted 159 ± 17 d with between-tree differences of up to 53 d. Synchronized vessel, parenchyma and δ13C profiles were related to each other. Only parenchyma fraction and δ13C were correlated to weather variables, whereas the δ18O pattern showed no trend. CONCLUSIONS: Asynchrony of leaf and cambial phenology complicates correct interpretation of environmental information recorded in wood. An integrated approach including high-resolution measurements of growth, stable isotopes and anatomical features allows exact dating of the formation of traits. This methodology offers a means to explore the asynchrony of growth in a rainforest and contribute to understanding this aspect of forest resilience.

The effect of polyploidization on tree hydraulic functioning.

PREMISE OF THE STUDY: Recent research has highlighted the importance of living tissue in wood. Polyploidization can impact amounts and arrangements of living cells in wood, potentially leading to increased drought tolerance. Tetraploid variants were created from the apple cultivar Malus ×domestica 'Gala' (Gala-4x), and their vulnerability to drought-induced cavitation and their hydraulic capacitance were compared to those of their diploid predecessors (Gala-2x). Assuming a positive correlation between polyploidy and drought tolerance, we hypothesized lower vulnerability and higher capacitance for the tetraploid. METHODS: Vulnerability to drought-induced cavitation and the hydraulic capacitance were quantified through acoustic emission and continuous weighing of shoots during a bench-top dehydration experiment. To underpin the hydraulic trait results, anatomical variables such as vessel area, conduit diameter, cell wall reinforcement, and ray and vessel-associated parenchyma were measured. KEY RESULTS: Vulnerability to drought-induced cavitation was intrinsically equal for both ploidy variants, but Gala-4x proved to be more vulnerable than Gala-2x during the early phase of desiccation as was indicated by its significantly lower air entry value. Higher change in water content of the leafy shoot, higher amount of parenchyma, and larger vessel area and size resulted in a significantly higher hydraulic capacitance and efficiency for Gala-4x compared to Gala-2x. CONCLUSIONS: Both ploidy variants were typified as highly sensitive to drought-induced cavitation, with no significant difference in their overall drought vulnerability. But, when water deficit is short and moderate, Gala-4x may delay a drought-induced decrease in performance by trading hydraulic safety for increased release of capacitively stored water from living tissue.

The Salivary Protein Repertoire of the Polyphagous Spider Mite Tetranychus urticae: A Quest for Effectors.

The two-spotted spider mite Tetranychus urticae is an extremely polyphagous crop pest. Alongside an unparalleled detoxification potential for plant secondary metabolites, it has recently been shown that spider mites can attenuate or even suppress plant defenses. Salivary constituents, notably effectors, have been proposed to play an important role in manipulating plant defenses and might determine the outcome of plant-mite interactions. Here, the proteomic composition of saliva from T. urticae lines adapted to various host plants-bean, maize, soy, and tomato-was analyzed using a custom-developed feeding assay coupled with nano-LC tandem mass spectrometry. About 90 putative T. urticae salivary proteins were identified. Many are of unknown function, and in numerous cases belonging to multimembered gene families. RNAseq expression analysis revealed that many genes coding for these salivary proteins were highly expressed in the proterosoma, the mite body region that includes the salivary glands. A subset of genes encoding putative salivary proteins was selected for whole-mount in situ hybridization, and were found to be expressed in the anterior and dorsal podocephalic glands. Strikingly, host plant dependent expression was evident for putative salivary proteins, and was further studied in detail by micro-array based genome-wide expression profiling. This meta-analysis revealed for the first time the salivary protein repertoire of a phytophagous chelicerate. The availability of this salivary proteome will assist in unraveling the molecular interface between phytophagous mites and their host plants, and may ultimately facilitate the development of mite-resistant crops. Furthermore, the technique used in this study is a time- and resource-efficient method to examine the salivary protein composition of other small arthropods for which saliva or salivary glands cannot be isolated easily.

A field-to-desktop toolchain for X-ray CT densitometry enables tree ring analysis.

BACKGROUND AND AIMS: Disentangling tree growth requires more than ring width data only. Densitometry is considered a valuable proxy, yet laborious wood sample preparation and lack of dedicated software limit the widespread use of density profiling for tree ring analysis. An X-ray computed tomography-based toolchain of tree increment cores is presented, which results in profile data sets suitable for visual exploration as well as density-based pattern matching. METHODS: Two temperate (Quercus petraea, Fagus sylvatica) and one tropical species (Terminalia superba) were used for density profiling using an X-ray computed tomography facility with custom-made sample holders and dedicated processing software. KEY RESULTS: Density-based pattern matching is developed and able to detect anomalies in ring series that can be corrected via interactive software. CONCLUSIONS: A digital workflow allows generation of structure-corrected profiles of large sets of cores in a short time span that provide sufficient intra-annual density information for tree ring analysis. Furthermore, visual exploration of such data sets is of high value. The dated profiles can be used for high-resolution chronologies and also offer opportunities for fast screening of lesser studied tropical tree species.

Charcoal-inferred Holocene fire and vegetation history linked to drought periods in the Democratic Republic of Congo.

The impact of Holocene drought events on the presumably stable Central African rainforest remains largely unexplored, in particular the significance of fire. High-quality sedimentary archives are scarce, and palynological records mostly integrate over large regional scales subject to different fire regimes. Here, we demonstrate a direct temporal link between Holocene droughts, palaeofire and vegetation change within present-day Central African rainforest, using records of identified charcoal fragments extracted from soil in the southern Mayumbe forest (Democratic Republic of Congo). We find three distinct periods of local palaeofire occurrence: 7.8-6.8 ka BP, 2.3-1.5 ka BP, 0.8 ka BP - present. These periods are linked to well-known Holocene drought anomalies: the 8.2 ka BP event, the 3rd millennium BP rainforest crisis and the Mediaeval Climate Anomaly. During and after these Holocene droughts, the Central African rainforest landscape was characterized by a fragmented pattern with fire-prone open patches. Some fires occurred during the drought anomalies although most fires seem to lag behind them, which suggests that the open patches remained fire-prone after the actual climate anomalies. Charcoal identifications indicate that mature rainforest patches did persist through the Early to Mid-Holocene climatic transition, the subsequent Holocene thermal optimum and the third millennium BP rainforest crisis, until 0.8 ka BP. However, disturbance and fragmentation were probably more prominent near the boundary of the southern Mayumbe forest. Furthermore, the dominance of pioneer and woodland savanna taxa in younger charcoal assemblages indicates that rainforest regeneration was hampered by increasingly severe drought conditions after 0.8 ka BP. These results support the notion of a dynamic forest ecosystem at multicentury time scales across the Central African rainforest.

Non-destructive wood identification using X-ray µCT scanning: which resolution do we need?

BACKGROUND: Taxonomic identification of wood specimens provides vital information for a wide variety of academic (e.g. paleoecology, cultural heritage studies) and commercial (e.g. wood trade) purposes. It is generally accomplished through the observation of key anatomical features. Classic methodologies mostly require destructive sub-sampling, which is not always acceptable. X-ray computed micro-tomography (µCT) is a promising non-destructive alternative since it allows a detailed non-invasive visualization of the internal wood structure. There is, however, no standardized approach that determines the required resolution for proper wood identification using X-ray µCT. Here we compared X-ray µCT scans of 17 African wood species at four resolutions (1 µm, 3 µm, 8 µm and 15 µm). The species were selected from the Xylarium of the Royal Museum for Central Africa, Belgium, and represent a wide variety of wood-anatomical features. RESULTS: For each resolution, we determined which standardized anatomical features can be distinguished or measured, using the anatomical descriptions and microscopic photographs on the Inside Wood Online Database as a reference. We show that small-scale features (e.g. pits and fibres) can be best distinguished at high resolution (especially 1 µm voxel size). In contrast, large-scale features (e.g. vessel porosity or arrangement) can be best observed at low resolution due to a larger field of view. Intermediate resolutions are optimal (especially 3 µm voxel size), allowing recognition of most small- and large-scale features. While the potential for wood identification is thus highest at 3 µm, the scans at 1 µm and 8 µm were successful in more than half of the studied cases, and even the 15 µm resolution showed a high potential for 40% of the samples. CONCLUSIONS: The results show the potential of X-ray µCT for non-destructive wood identification. Each of the four studied resolutions proved to contain information on the anatomical features and has the potential to lead to an identification. The dataset of 17 scanned species is made available online and serves as the first step towards a reference database of scanned wood species, facilitating and encouraging more systematic use of X-ray µCT for the identification of wood species.

Historical tree phenology data reveal the seasonal rhythms of the Congo Basin rainforest.

Tropical forest phenology directly affects regional carbon cycles, but the relation between species-specific and whole-canopy phenology remains largely uncharacterized. We present a unique analysis of historical tropical tree phenology collected in the central Congo Basin, before large-scale impacts of human-induced climate change. Ground-based long-term (1937-1956) phenological observations of 140 tropical tree species are recovered, species-specific phenological patterns analyzed and related to historical meteorological records, and scaled to characterize stand-level canopy dynamics. High phenological variability within and across species and in climate-phenology relationships is observed. The onset of leaf phenophases in deciduous species was triggered by drought and light availability for a subset of species and showed a species-specific decoupling in time along a bi-modal seasonality. The majority of the species remain evergreen, although central African forests experience relatively low rainfall. Annually a maximum of 1.5% of the canopy is in leaf senescence or leaf turnover, with overall phenological variability dominated by a few deciduous species, while substantial variability is attributed to asynchronous events of large and/or abundant trees. Our results underscore the importance of accounting for constituent signals in canopy-wide scaling and the interpretation of remotely sensed phenology signals.

Postprocessing method for reducing phase effects in reconstructed microcomputed-tomography data.

With increased resolution in x-ray computed tomography, refraction adds increasingly to the attenuation signal. Though potentially beneficial, the artifacts caused by refraction often need to be removed from the image. In this paper, we propose a postprocessing method, based on deconvolution, that is able to remove these artifacts after conventional reconstruction. This method poses two advantages over existing projection-based (preprocessing) phase-retrieval or phase-removal algorithms. First, evaluation of the parameters can be done very quickly, improving the overall speed of the method. Second, postprocessing methods can be applied when projection data is not available, which occurs in several commercial systems with closed software or when projection data has been deleted. It is shown that the proposed method performs comparably to state-of-the-art methods in terms of image quality.

Tree Core Analysis with X-ray Computed Tomography.

An X-ray computed tomography (CT) toolchain is presented to obtain tree-ring width (TRW), maximum latewood density (MXD), other density parameters, and quantitative wood anatomy (QWA) data without the need for labor-intensive surface treatment or any physical sample preparation. The focus here is on increment cores and scanning procedures at resolutions ranging from 60 µm down to 4 µm. Three scales are defined at which wood should be looked at: (i) inter-ring scale, (ii) ring scale, i.e., tree-ring analysis and densitometry scale, as well as (iii) anatomical scale, the latter approaching the conventional thin-section quality. Custom-designed sample holders for each of these scales enable high-throughput scanning of multiple increment cores. A series of software routines were specifically developed to efficiently treat three-dimensional X-ray CT images of the tree cores for TRW and densitometry. This work briefly explains the basic principles of CT, which are needed for a proper understanding of the protocol. The protocol is presented for some known species that are commonly used in dendrochronology. The combination of rough density estimates, TRW and MXD data, as well as quantitative anatomy data, allows us to broaden and deepen current analyses for climate reconstructions or tree response, as well as further develop the field of dendroecology/climatology and archeology.

Heading for a fall: The fate of old wind-thrown beech trees (Fagus sylvatica) is detectable in their growth pattern.

Common beech (Fagus sylvatica) is one of the most important deciduous tree species in European forests. However, climate-change-induced drought may threaten its dominant position. The Sonian Forest close to Brussels (Belgium) is home to some of the largest beech trees in the world. This UNESCO world heritage site is famous for its high density of very large beech trees as a result of its climatic suitability, fertile soil conditions, and past management. Here we utilized tree-ring data from increment cores to investigate the growth of these old and monumental beech trees, evaluating their growth trends, response to past climate, and the effect of mast years on 39 living and 16 recently wind-thrown trees. Our analysis reveals that the sampled trees were generally sensitive to spring and summer droughts but recovered quickly after such an extreme climatic event. The growth trend of living trees has remained high and only shows a slight, statistically insignificant, decline over the past 50 years. Although the overall growth rate remains strong (BAI 50 cm2/year), the past five decades have shown strong inter-annual growth variations due to frequent and more intense droughts combined with an increased frequency of mast years. We also found notable differences in growth patterns between the living trees and those that had recently been wind-thrown. While there were no significant differences between living and wind-thrown trees in response to droughts, heatwaves, or mast years when examining year-to-year growth changes, the wind-thrown trees did exhibit considerably lower overall growth rates and a significant downward trend in growth (BAI -0.57 cm2/year). This difference in growth trends has been apparent since at least the 1980s. Overall, the findings of this study can provide valuable insights for understanding the long-term dynamics of lowland beech forests and their responses to climate change.

SmartWoodID-an image collection of large end-grain surfaces to support wood identification systems.

Wood identification is a key step in the enforcement of laws and regulations aimed at combatting illegal timber trade. Robust wood identification tools, capable of distinguishing a large number of timbers, depend on a solid database of reference material. Reference material for wood identification is typically curated in botanical collections dedicated to wood consisting of samples of secondary xylem of lignified plants. Specimens from the Tervuren Wood Collection, one of the large institutional wood collections around the world, are used as a source of tree species data with potential application as timber. Here, we present SmartWoodID, a database of high-resolution optical scans of the end-grain surfaces enriched with expert wood anatomical descriptions of macroscopic features. These can serve as annotated training data to develop interactive identification keys and artificial intelligence for computer vision-based wood identification. The first edition of the database consists of images of 1190 taxa, with a focus on potential timber species from the Democratic Republic of the Congo with at least four different specimens per species included. Database URL https://hdl.handle.net/20.500.12624/SmartWoodID_first_edition.

Fluctuations of cambial activity in relation to precipitation result in annual rings and intra-annual growth zones of xylem and phloem in teak (Tectona grandis) in Ivory Coast.

BACKGROUND AND AIMS: Teak forms xylem rings that potentially carry records of carbon sequestration and climate in the tropics. These records are only useful when the structural variations of tree rings and their periodicity of formation are known. METHODS: The seasonality of ring formation in mature teak trees was examined via correlative analysis of cambial activity, xylem and phloem formation, and climate throughout 1·5 years. Xylem and phloem differentiation were visualized by light microscopy and scanning electron microscopy. KEY RESULTS: A 3 month dry season resulted in semi-deciduousness, cambial dormancy and formation of annual xylem growth rings (AXGRs). Intra-annual xylem and phloem growth was characterized by variable intensity. Morphometric features of cambium such as cambium thickness and differentiating xylem layers were positively correlated. Cambium thickness was strongly correlated with monthly rainfall (R(2) = 0·7535). In all sampled trees, xylem growth zones (XGZs) were formed within the AXGRs during the seasonal development of new foliage. When trees achieved full leaf, the xylem in the new XGZs appeared completely differentiated and functional for water transport. Two phloem growth rings were formed in one growing season. CONCLUSIONS: The seasonal formation pattern and microstructure of teak xylem suggest that AXGRs and XGZs can be used as proxies for analyses of the tree history and climate at annual and intra-annual resolution.

Whole genome duplication of wild-type and CINNAMYL ALCOHOL DEHYDROGENASE1-downregulated hybrid poplar reduces biomass yield and causes a brittle apex phenotype in field-grown wild types.

The potential of whole genome duplication to increase plant biomass yield is well-known. In Arabidopsis tetraploids, an increase in biomass yield was accompanied by a reduction in lignin content and, as a result, a higher saccharification efficiency was achieved compared with diploid controls. Here, we evaluated whether the results obtained in Arabidopsis could be translated into poplar and whether the enhanced saccharification yield upon alkaline pretreatment of hairpin-downregulated CINNAMYL ALCOHOL DEHYDROGENASE1 (hpCAD) transgenic poplar could be further improved upon a whole genome duplication. Using a colchicine treatment, wild-type (WT) Populus tremula x P. alba cv. INRA 717-1B4, a commonly used model clone in tree biotechnology research, and hpCAD tetraploids were generated and grown in the greenhouse. In parallel, WT tetraploid poplars were grown in the field. In contrast to Arabidopsis, a whole genome duplication of poplar had a negative impact on the biomass yield of both greenhouse- and field-grown trees. Strikingly, field-grown WT tetraploids developed a brittle apex phenotype, i.e., their tip broke off just below the apex. In addition, the chromosome doubling altered the biomass composition of field-grown, but not of greenhouse-grown tetraploid poplars. More specifically, the lignin content of field-grown tetraploid poplars was increased at the expense of matrix polysaccharides. This increase in lignin deposition in biomass is likely the cause of the observed brittle apex phenotype, though no major differences in stem anatomy or in mechanical properties could be found between di- and tetraploid WT poplars grown in the field. Finally, without biomass pretreatment, the saccharification efficiency of greenhouse- and field-grown WT diploids was not different from that of tetraploids, whereas that of greenhouse-grown hpCAD tetraploids was higher than that of greenhouse-grown diploids. Upon alkaline pretreatment, the saccharification yield of diploids was similar to that of tetraploids for all genotypes and growth conditions tested. This study showed that a whole genome duplication in hybrid WT and hpCAD poplar did neither result in further improvements in biomass yield, nor in improved biomass composition and, hence, saccharification performance.

Detecting thin adhesive coatings in wood fiber materials with laboratory-based dual-energy computed tomography (DECT).

The distribution and good spreading of adhesive resins is critical for the wood-based panels industry. Full 3D non-destructive characterization is necessary, but methods are limited due to the chemical similarities between the resins and the wood fibers. For X-ray microtomography ([Formula: see text]CT), the doping of the resin with a highly attenuating contrast agent is necessary to visualize the resin distribution. However, the attenuation signal remains hard to segment clearly due to partial volume effects in the image, and phase mixing in the material. To help in the identification of the doped resin, dual-energy X-ray CT (DECT) is used to exploit the contrast agent's K-edge, based on simulations which take into account the polychromatic properties of the X-ray tube and detector response. The contrast agent's identification with DECT is validated with elemental mapping using scanning electron microscopy combined with energy-dispersive spectroscopy (SEM-EDX) on the surface of a wood-based panel sample, using data fusion between DECT and SEM-EDX. Overall, DECT results here in the first 3D identification of doped resin inside wood fiberboards, guiding the industry's efforts in further improving the durability of wood-based panels.