RESUMEN
Biochar has emerged as a versatile and efficient multi-functional material, serving as both an adsorbent and catalyst in removing emerging pollutants (EPs) from aquatic matrices. However, pristine biochar's catalytic and adsorption capabilities are hindered by its poor surface functionality and small pore size. Addressing these limitations involves the development of functionalized biochar, a strategic approach aimed at enhancing its physicochemical properties and improving adsorption and catalytic efficiencies. Despite a growing interest in this field, there is a notable gap in existing literature, with no review explicitly concentrating on the efficacy of biochar-based functional materials (BCFMs) for removing EPs in aquatic environments. This comprehensive review aims to fill this void by delving into the engineering considerations essential for designing BCFMs with enhanced physiochemical properties. The focus extends to understanding the treatment efficiency of EPs through mechanisms such as adsorption or catalytic degradation. The review systematically outlines the underlying mechanisms involved in the adsorption and catalytic degradation of EPs by BCFMs. By shedding light on the prospects of BCFMs as a promising multi-functional material, the review underscores the imperative for sustained research efforts. It emphasizes the need for continued exploration into the practical implications of BCFMs, especially under environmentally relevant pollutant concentrations. This holistic approach seeks to contribute to advancing knowledge and applying biochar-based solutions in addressing the challenges posed by emerging pollutants in aquatic ecosystems.
Asunto(s)
Carbón Orgánico , Contaminantes Químicos del Agua , Carbón Orgánico/química , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Adsorción , CatálisisRESUMEN
The yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites with Co3 O4 as the core, Fe3 O4 /C as the shell, and a cavity structure were synthesized by the hard template method. The physical and chemical properties of the composites were characterized by SEM, TEM, XRD, TGA, XPS, BET, and VSM. The specific surface area of yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites is 175.9â m2 â g-1 , showing superparamagnetic properties. The yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites were used as heterogeneous Fenton catalysts to activate peroxymonosulfate (PMS) to degrade MB, which showed high catalytic degradation performance. The degradation rate of MB reached 100 % within 30â min under the circumstances of the yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites dosage of 0.1â g L-1 , the PMS dosage of 1.0â g L-1 , the initial MB concentration of 100â mg L-1 , an initial pH of 5.5, and a temperature of 30±2 °C. The enhanced catalytic performance of the yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites can be attributed to the synergistic effect of the two catalytically active materials and the middle cavity. The effects of different operating parameters and co-existing anion species on MB degradation were also investigated. Electron paramagnetic resonance (EPR) analysis and quenching experiments confirmed that the formation of SO4 â - in the yolk-shell Co3 O4 @Fe3 O4 /C/PMS system contributes to MB degradation. In addition, yolk-shell Co3 O4 @Fe3 O4 /C nanocomposites can be easily separated from the pollutant solution under the action of an external magnetic field, and the degradation rate of MB can still reach 98 % after five cycles, indicating that it has good stability and reusability and has broad application prospects in the field of water purification.
RESUMEN
Current methods for evaluating catalytic degradation reactions of environmental pollutants primarily rely on chromatography that often suffers from intermittent analysis, a long turnaround period, and complex sample pretreatment. Herein, we propose a quantitative time-resolved visualization method to evaluate the progress of catalytic degradation reactions by integrating sample pretreatment [single-drop microextraction, (SDME)], fluorescence sensing, and a smartphone detection platform. The dechlorination reaction of chlorobenzene derivatives was first investigated to validate the feasibility of this approach, in which SDME plays a critical role in direct sample pretreatment, and inorganic CsPbBr3 perovskite encapsulated in a metal-organic framework (MOF-5) was utilized as the fluorescent chromogenic agent (FLCA) in SDME to realize fast in situ colorimetric detection via the color switching from green (CsPbBr3) to blue (chlorine lead bromide, inorganic CsPbCl3 perovskite). The smartphone, which can calculate the B/G value of FLCA, serves as a data output window for quantitative time-resolved visualization. Further, a [Eu(PMA)]n (PMA= pyromellitic acid) fluorescent probe was constructed to use as an FLCA for the in situ evaluation of cinnamaldehyde and p-nitrophenol catalytic reduction. This approach not only minimizes the utilization of organic solvents and achieves quantitively efficient time-resolved visualization but also provides a feasible method for in situ monitoring of the progress of catalytic degradation reactions.
Asunto(s)
Contaminantes Ambientales , Fluorescencia , Óxidos , SolventesRESUMEN
Persulfate activation is a forceful method for eliminating organic pollutants from coal chemical wastewater. In this study, an in-situ synthesis method was used to fabricate an iron-chitosan-derived biochar (Fe-CS@BC) nanocomposite catalyst using chitosan as a template. Fe was successfully imprinted into the newly synthesized catalyst. The Fe-CS@BC can activate persulfate to effectively degrade phenol. This point was confirmed by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The impact of various parameters on the removal rate was investigated in a single factor experiment. In Fe-CS@BC/PDS system, 95.96% of phenol (significantly higher than the original biochar of 34.33%) was removed within 45 min and 54.39% TOC within 2 h. The system showed superior efficiency over a broad pH value band from 3 to 9 and has a high degradation rate at ambient temperature. Free radical quenching experiment, EPR experiment and LSV experiment confirmed that multiple free radicals (including 1O2, SO4â¢-, O2â¢- and â¢OH) and electron transfer pathway combined to enhance phenol decomposition. Finally, the activation mechanism of persulfate by Fe-CS@BC was proposed to provide logical guidance on the treatment of organic pollutants in coal chemical wastewater.
Asunto(s)
Quitosano , Contaminantes Químicos del Agua , Hierro/química , Aguas Residuales , Contaminantes Químicos del Agua/análisis , Fenoles , Fenol , Fenómenos MagnéticosRESUMEN
Mismanagement of plastic waste results in its ubiquitous presence in the environment. Despite being durable and persistent materials, plastics are reduced by weathering phenomena into debris with a particle size down to nanometers. The fate and ecotoxicological effects of these solid micropollutants are not fully understood yet, but they are raising increasing concerns for the environment and people's health. Even if different current technologies have the potential to remove plastic particles, the efficiency of these processes is modest, especially for nanoparticles. Metal-organic frameworks (MOFs) are crystalline nano-porous materials with unique properties, have unique properties, such as strong coordination bonds, large and robustus porous structures, high accessible surface areas and adsorption capacity, which make them suitable adsorbent materials for micropollutants. This review examines the preliminary results reported in literature indicating that MOFs are promising adsorbents for the removal of plastic particles from water, especially when MOFs are integrated in porous composite materials or membranes, where they are able to assure high removal efficiency, superior water flux and antifouling properties, even in the presence of other dissolved co-pollutants. Moreover, a recent trend for the alternative preparation of MOFs starting from plastic waste, especially polyethylene terephthalate, as a sustainable source of organic linkers is also reviewed, as it represents a promising route for mitigating the impact of the costs deriving from the widescale MOFs production and application. This connubial between MOFs and plastic has the potential to contribute at implementing a more effective waste management and the circular economy principles in the polymer life cycle.
RESUMEN
The aqueous Trigonella foenum-graecum L. leaf extract belonging to variety HM 444 was used as reducing agent for silver nanoparticles (AgNPs) synthesis. UV-Visible spectroscopy, Particle size analyser (PSA), Field emission scanning electron microscopy coupled to energy dispersive X-ray spectroscopy (FESEM-EDX) and High-resolution transmission electron microscopy (HRTEM) were used to characterize AgNPs. Selected area electron diffraction (SAED) confirmed the formation of metallic Ag. Fourier Transform Infrared Spectroscopy (FTIR) was done to find out the possible phytochemicals responsible for stabilization and capping of the AgNPs. The produced AgNPs had an average particle size of 21 nm, were spherical in shape, and monodispersed. It showed catalytic degradation of Methylene blue (96.57%, 0.1665 ± 0.03 min-1), Methyl orange (71.45%, 0.1054 ± 0.002 min-1), and Rhodamine B (92.72%, 0.2004 ± 0.01 min-1). The produced AgNPs were excellent solid bio-based sensors because they were very sensitive to Hg2+ and Fe3+ metal ions with a detection limit of 11.17 µM and 195.24 µM, respectively. From the results obtained, it was suggested that aqueous leaf extract demonstrated a versatile and cost-effective method and should be utilized in future as green technology for the fabrication of nanoparticles.
Asunto(s)
Mercurio , Nanopartículas del Metal , Trigonella , Colorantes/metabolismo , Plata/química , Trigonella/química , Colorimetría , Nanopartículas del Metal/química , Espectroscopía Infrarroja por Transformada de Fourier , Mercurio/metabolismo , Tecnología Química Verde/métodos , Extractos Vegetales/química , Difracción de Rayos XRESUMEN
This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO32- increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO32-, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min-1, being 685% greater than that in the absence of CO32- (0.315 min-1). The comparison of dominated active species and 4-MP degradation pathways in both CO32--free and CO32--containing systems suggested that more CO3â¢-/1O2 was produced in the case of CO32-deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO32- enabled the effective reduction of Cu2+ to Cu+. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σp of the aromatic phenolics and the logarithm of k in the CO32--containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.
Asunto(s)
Fenoles , Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/análisis , Peróxidos , Carbonatos/químicaRESUMEN
Wastewater containing an azo dye Orange G (OG) causes massive environmental pollution, thus it is critical to develop a highly effective, environmental-friendly, and reusable catalyst in peroxymonosulfate (PMS) activation for OG degradation. In this work, we successfully applied a magnetic MnFe2O4/α-MnO2 hybrid fabricated by a simple hydrothermal method for OG removal in water. The characteristics of the hybrid were investigated by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller method, vibrating sample magnetometry, electron paramagnetic resonance, thermogravimetric analysis, and X-ray photoelectron spectroscopy. The effects of operational parameters (i.e., catalytic system, catalytic dose, solution pH, and temperature) were investigated. The results exhibited that 96.8% of OG degradation was obtained with MnFe2O4/α-MnO2(1:9)/PMS system in 30 min regardless of solution pH changes. Furthermore, the possible reaction mechanism of the coupling system was proposed, and the degradation intermediates of OG were identified by mass spectroscopy. The radical quenching experiments and EPR tests demonstrated that SO4â¢Ì¶, O2â¢Ì¶, and 1O2 were the primary reactive oxygen species responsible for the OG degradation. The hybrid also displayed unusual stability with less than 30% loss in the OG removal after four sequential cycles. Overall, magnetic MnFe2O4/α-MnO2 hybrid could be used as a high potential activator of PMS to remove orange G and maybe other dyes from wastewater.
Asunto(s)
Compuestos de Manganeso , Aguas Residuales , Compuestos Azo/química , Colorantes , Fenómenos Magnéticos , Compuestos de Manganeso/química , Óxidos , Peróxidos/química , Especies Reactivas de Oxígeno , AguaRESUMEN
High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment. In this study, N/Cu co-doped ZnS nanosphere photocatalyst (N/Cu-ZnS) is synthesized by a hydrothermal method for the first time. After doping, the texture of nanosphere becomes loose, the nanometer diameter is reduced, making the specific surface area of catalyst increased from 34.73 to 101.59 m2/g. The characterization results show that more ZnS (111) crystal planes are exposed by N/Cu co-doping; the calculations of density functional theory show that N/Cu co-doping can increase the catalytic activity of the ZnS (111) crystal plane, enhance the adsorption capacity of (111) crystal plane to O2, and promote the generation of â¢O2-. The energy levels of the introduced impurities can be hybridized with the energy levels of S and Zn at the top of valence band and the bottom of conduction band, which makes the band gap narrower, thus enhancing the absorption of visible light. Compared with pure ZnS, the degradation rates of 2,4-dichlorophenol (2,4-DCP) and tetracycline (TC) by N/Cu-ZnS under visible light (>420 nm) are increased by 83.7 and 51 times, respectively. In this research, a promising photocatalyst for photocatalytic degradation of organic pollutants in wastewater is provided.
Asunto(s)
Contaminantes Ambientales , Luz , Compuestos de Zinc/química , CatálisisRESUMEN
Carbonized polymer dots (CPDs) have received tremendous attention during the last decade due to their excellent fluorescent properties and catalytic performance. Doping CPDs with transition metal atoms accelerates the local electron flow in CPDs and improves the fluorescent properties and catalytic performance of the CPDs. However, the binding sites and the formation mechanisms of the transition-metal-atom-doped CPDs remain inconclusive. In this work, Mn2+ -ion-doped CPDs (Mn-CPDs) are synthesized by the hydrothermal method. The Mn2+ ions form MnO bonds that bridge the sp2 domains of carbon cores and increases the effective sp2 domains in the Mn-CPDs, which redshifts the fluorescence emission peak of the Mn-CPDs slightly. The Mn2+ ions form covalent bonds in the CPDs and remedy the oxygen vacancies of the CPDs, which cuts off the non-radiative-recombination process of the Mn-CPDs and increases the quantum yield of the Mn-CPDs to 70%. Furthermore, the MnO bonds accelerate the electron flow between adjacent sp2 domains and enhances the electron transport in the Mn-CPDs. Thus, the Mn-CPDs demonstrate excellent catalytic performance to activate hydrogen peroxide (H2 O2 ) and produce hydroxyl radicals (â¢OH) to degrade methylene blue (MB) and rhodamine B (RhB).
Asunto(s)
Polímeros , Puntos Cuánticos , Carbono/química , Transporte de Electrón , Fluorescencia , Polímeros/química , Puntos Cuánticos/químicaRESUMEN
Micro/nanoscale robotics has received great attention in many important fields. However, it is still a great challenge to construct nanorobots simultaneously possessing multifunctionality, well-controlled directionality, and fast and durable motion as well as fully compatible and biodegradable components. Here, a hierarchical, asymmetric, hollow, catalytic, magnetic, and mesoporous nanorobot has been fabricated through a multistep interfacial superassembly strategy. The multilayer composites consist of hollow silica nanoflasks sequentially coated with a highly magnetic responsive Fe3 O4 layer, a mesoporous silica layer with homogeneous vertical channels, and a layer of catalytic gold nanoparticles on both the inner and outer surfaces. Furthermore, para-nitrophenol was used as a model pollutant to trigger self-motility of the nanoflasks by confined catalytic degradation (CCD). We found that the bottleneck morphology and mesoporous surface both improved the catalytic nanoparticle loading capability and CCD effect, thus enabling efficient self-motility and a durable movement capacity of â¼100â h. In addition, the catalytic performance was improved by 180 % compared with that of solid spherical nanoparticles.
Asunto(s)
Oro , Nanopartículas del Metal , Catálisis , Fenómenos Magnéticos , Dióxido de SilicioRESUMEN
The development of catalysts with high chlorine resistance for volatile organic compound (VOC) degradation is of great significance to achieve air purification. Herein, Pd@ZrO2 catalysts with monodispersed Pd atoms coordinated with Cl were prepared using an in situ grown Zr-based metal-organic framework (MOF) as the sacrifice templates to enhance the chlorine resistance for VOC elimination. The residual Cl species from the Zr-MOF coordinated with Pd, forming Pd1-Cl species during the pyrolysis. Meanwhile, abundant oxygen vacancies (VO) were generated, which enhanced the adsorption and activation of gaseous oxygen molecules, accelerating the degradation of VOCs. In addition, the Pd@ZrO2 catalysts exhibited satisfactory water resistance, long-term stability, and great resistance to CO and dichloromethane (DCM) for VOC elimination. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results elucidated that the generation of Pd1-Cl species in Pd@ZrO2 suppressed the absorption of DCM, releasing more active sites for toluene and its intermediate adsorption. Simultaneously, the monodispersed Pd atoms and VO improved the reactivity of gaseous oxygen molecule adsorption and dissociation, boosting the deep decomposition of toluene and its intermediates. This work may provide a new strategy for rationally designing high-chlorine resistance catalysts for VOC elimination to improve the atmospheric environment.
RESUMEN
In recent days, the usage of biological and non-biological pollutants increased which poses a significant threat to environmental and biological systems. Therefore, the present aim is to develop effective methods to treat such pollutants by using highly stable and small-sized Schiff base ligand capped silver nanoparticles (AgNPs) with a face-centered cubic (fcc) crystalline structure and the size range is 5-10 nm. The potent role of the resulting synthesized AgNPs was found to be on multiple platforms such as catalyst, sensor, antioxidant, and antimicrobial disinfectant. The synthesized AgNPs were characterized through UV-vis spectroscopy, PL, FTIR, XRD, SEM, and TEM. The FTIR spectrum of AgNPs exhibited the interacted functional groups of Schiff base and size was estimated by XRD and TEM. AgNPs were able to catalytically degrade approximately 95% of methylene blue (MB), rhodamine B (RhB), and eosin Y (EY) dyes within 80 min of reaction time using NaBH4. The fluorometric sensor studies of synthesized AgNPs showed selective sensing of the potentially hazardous Fe2+ ion in water. As an antimicrobial agent, the AgNPs are effective against both Gram-positive and Gram-negative bacteria; as well as fungi, with the zones of clearance as approximately compatible with standard drugs. The AgNPs displayed a greater ability to scavenge free radicals, especially DPPH when compared with AgNPs and ascorbic acid. Thus, the results of this study validate the triple role of AgNPs derived via a simple synthesis as a catalyst, sensor, antioxidant, and antimicrobial agent for effective environmental remediation.
Asunto(s)
Antiinfecciosos , Desinfectantes , Contaminantes Ambientales , Nanopartículas del Metal , Plata/química , Antibacterianos/química , Nanopartículas del Metal/química , Antioxidantes/farmacología , Azul de Metileno/química , Bases de Schiff/farmacología , Ligandos , Eosina Amarillenta-(YS)/farmacología , Bacterias Gramnegativas , Extractos Vegetales/química , Bacterias Grampositivas , Antiinfecciosos/farmacología , Antiinfecciosos/química , Colorantes/química , Agua , Ácido Ascórbico , Desinfectantes/farmacologíaRESUMEN
The frequent use of antibiotics allows them to enter aqueous environments via wastewater, and many types of antibiotics accumulate in the environment due to difficult degradation, causing a threat to environmental health. It is crucial to adopt effective technical means to remove antibiotics in aqueous environments. The Fenton reaction, as an effective organic pollution treatment technology, is particularly suitable for the treatment of antibiotics, and at present, it is one of the most promising advanced oxidation technologies. Specifically, rapid Fenton oxidation, which features high removal efficiency, thorough reactions, negligible secondary pollution, etc., has led to many studies on using the Fenton reaction to degrade antibiotics. This paper summarizes recent progress on the removal of antibiotics in aqueous environments by Fenton and Fenton-like reactions. First, the applications of various Fenton and Fenton-like oxidation technologies to the removal of antibiotics are summarized; then, the advantages and disadvantages of these technologies are further summarized. Compared with Fenton oxidation, Fenton-like oxidations exhibit milder reaction conditions, wider application ranges, great reduction in economic costs, and great improved cycle times, in addition to simple and easy recycling of the catalyst. Finally, based on the above analysis, we discuss the potential for the removal of antibiotics under different application scenarios. This review will enable the selection of a suitable Fenton system to treat antibiotics according to practical conditions and will also aid the development of more advanced Fenton technologies for removing antibiotics and other organic pollutants.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Antibacterianos , Catálisis , Peróxido de Hidrógeno , Oxidación-Reducción , Aguas Residuales , AguaRESUMEN
In this study, low-cost and easily obtained biochar was chosen to prepare nickel-modified biochar materials (Ni/BC) through a one-step activation pyrolysis method. Characterization with X-ray diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy proved the existence of Ni0 and NiO nanocrystals in Ni/BC catalyst. The optimal Ni0.5/BC exhibited excellent peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation efficiency toward bisphenol A (BPA) degradation. The Ni0.5/BC (0.03 g) reacted with 1.0 g L-1 PMS or PDS could completely remove 20 mg L-1 BPA in 10 min with the first-order kinetic constants (k1) of 0.322 min-1 (PMS) and 0.336 min-1 (PDS). More importantly, the composite has better structural and functional attributes for the BPA degradation with universal applicability at wide pH and temperature range, proving as a better degradation mediator with high adaptation for numerous organic pollutants. Catalytic activity decreased slightly even after 4 cycles. Based on the quenching experiment and electron paramagnetic resonance, it was found that SO4â¢-, â¢OH and 1O2 were the dominant active species in BPA degradation process. Therefore, this work not only supplies a promising catalyst for the removal of organic contaminants, but also is beneficial for the further development of alternative catalysts for sulfate radical based advanced oxidation processes.
Asunto(s)
Carbón Orgánico , Níquel , Carbón Orgánico/química , Compuestos de BencidriloRESUMEN
In this study, pristine biochar (BC), ball milling biochar (MBC), Fe3O4 modified BC (Fe3O4@BC), and Fe3O4 modified MBC (Fe3O4@MBC) were prepared to compare the Bisphenol A (BPA) removal efficiency by activating persulfate (PDS). All catalysts exhibited excellent degradation rather than adsorption in the PDS system, and Fe3O4@MBC800 had the best BPA removal efficiency, with 96.73% degradation and negligible 1.43% adsorption due to the synergistic effect between MBC800 and Fe3O4 particles. Radical quenching experiments and electron paramagnetic resonance analysis indicated radical pathways, namely, SO4â- and âOH, O2â-, and non-radical pathway (1O2) involving BPA degradation. The abundant oxygen-containing groups, increased graphitization and mesopores of MBC800, and Fe3+/Fe2+ conversion of Fe3O4 particles facilitated PDS activation to produce reactive oxygen species. In addition, the superior electrochemical performance accelerated the electron transfer between the catalyst and PDS, promoting BPA degradation in the Fe3O4@MBC800/PDS system. More importantly, Fe3O4@MBC800 is resistant to environmental interference, including pH, anions, cations, and humic acid, and has good catalytic reusability and stability, which fulfills the requirements of engineering applications. Therefore, Fe3O4 loaded on ball-milled biochar provides a convenient strategy for preparing environmentally friendly, economical, and efficient carbon-based catalysts to remove organic contaminants.
Asunto(s)
Contaminantes Químicos del Agua , Compuestos de Bencidrilo/análisis , Carbón Orgánico , Fenoles , Contaminantes Químicos del Agua/análisisRESUMEN
Wastewater from the textile industries contaminates the natural water and affects the aquatic environment, soil fertility and biological ecosystem through discharge of different hazardous effluents. Therefore, it is essential to remove such dissolved toxic materials from water by applying more efficient techniques. We performed a comparative study on the removal of rhodamine B (RhB) and Nile blue (NB) from water through a catalytic/photocatalytic approach while using a CuO-SiO2 based nanocomposite. The CuO-SiO2 nanocomposite was synthesized through a sol-gel process using copper nitrate dihydrate and tetraethylorthosilicate as CuO and SiO2 precursors, respectively, with ammonia solution as the precipitating agent. The synthesized nanocomposites were characterized, for their structure, morphology, crystallinity, stability, surface area, pore size and pore volume, by using a scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) techniques. The CuO-SiO2 nanocomposite was used for potential environmental applications in the terms of its catalytic and photocatalytic activities toward the degradation of rhodamine B (RhB) and Nile blue (NB) dyes, in the presence and absence of light, while monitoring the degradation process of dyes by UV-Visible spectroscopy. The catalytic efficiency of the same composite was studied and discussed in terms of changes in the chemical structures of dyes and other experimental conditions, such as the presence and absence of light. Moreover, the composite showed 85% and 90% efficiency towards the removal of rhodamine B and Nile blue dyes respectively. Thus, the CuO-SiO2 nanocomposite showed better efficiency toward removal of Nile blue as compared to rhodamine B dye while keeping other experimental variables constant. This can be attributed to the structure-property relationships and compatibility of a catalyst with the molecular structures of dyes.
Asunto(s)
Colorantes , Dióxido de Silicio , Cobre , Ecosistema , Oxazinas , Rodaminas , AguaRESUMEN
The meso-tetrakis(4-(trifluoromethyl)phenyl)porphyrinato cobalt(II) complex [Co(TMFPP)] was synthesised in 93% yield. The compound was studied by 1H NMR, UV-visible absorption, and photoluminescence spectroscopy. The optical band gap Eg was calculated to 2.15 eV using the Tauc plot method and a semiconducting character is suggested. Cyclic voltammetry showed two fully reversible reduction waves at E1/2 = -0.91 V and E1/2 = -2.05 V vs. SCE and reversible oxidations at 0.30 V and 0.98 V representing both metal-centred (Co(0)/Co(I)/Co(II)/Co(III)) and porphyrin-centred (Por2-/Por-) processes. [Co(TMFPP)] is a very active catalyst for the electrochemical formation of H2 from DMF/acetic acid, with a Faradaic Efficiency (FE) of 85%, and also catalysed the reduction of CO2 to CO with a FE of 90%. Moreover, the two triarylmethane dyes crystal violet and malachite green were decomposed using H2O2 and [Co(TMFPP)] as catalyst with an efficiency of more than 85% in one batch.
RESUMEN
Herein, we found that anthraquinone (AQ) acted as a catalyst for the rapid and effective removal of triphenylmethane dye containing tertiary amino group (TDAG). Results showed that AQ had an enhanced catalytic reactivity towards the removal of TDAG compared to hydro-quinone, which was further proved and explained using density functional theory (DFT) calculations. AQs could achieve a TDAG removal efficiency and rate of approximately 100% and 0.3583 min-1, respectively, within 20 min. Quenching experiments and electron paramagnetic resonance (EPR) tests indicated that the superoxide radical (O2â¢-) generated through the catalytic reduction of an oxygen molecule (O2) by AQ contributed to the effective removal of the TDAG. In addition, it was found that the electrophilic attack of the O2â¢- radical on the TDAG was the driving force for the dye degradation process. Decreasing the pH led to protonation of the substituted group of AG, which resulted in formation of an electron deficient center in the TDAG molecule (TDAG-EDC+) through delocalization of the π electron. Therefore, the possibility of the electrophilic attack for the dye by the negative O2â¢- radical was significantly enhanced. This study revealed that the H+ and the O2â¢- generated by the catalytic reduction of O2 have synergistic effects that led to a significant increase in the dye removal rate and efficiency, which were higher than those obtained through persulfate oxidation.
Asunto(s)
Antraquinonas , Colorantes , Antraquinonas/química , Catálisis , Colorantes/química , Oxidación-Reducción , Compuestos de TritiloRESUMEN
Nerve agents are tetrahedral organophosphorus compounds (OPs) that were developed in the last century to irreversibly inhibit acetylcholinesterase (AChE) and therefore impede neurological signaling in living organisms. Exposure to OPs leads to a rapid development of symptoms from excessive salivation, nasal congestion and chest pain to convulsion and asphyxiation which if left untreated may lead to death. These potent toxins are prepared on a large scale from inexpensive staring materials, making it feasible for terrorist groups or states to use them against military and civilians. The existing antidotes provide limited protection and are difficult to apply to a large number of affected individuals. While new prophylactics are currently being developed, there is still need for therapeutics capable of both preventing and reversing the effects of OP poisoning. In this review, we describe how the science of molecular recognition can expand the pallet of tools for rapid and safe sequestration of nerve agents.