Immunotactoid hepatopathy: A novel entity with histologically proven recurrence post liver transplantation.

Immunotactoid deposition is a rare fibrillary deposition disease that is primarily seen in the kidney and is associated with paraproteinemia. Here, we report a case of hepatic immunotactoid deposition in a 67-year-old male with a history of smoldering myeloma and chronic kidney disease who underwent liver transplantation for metabolic dysfunction-related cirrhosis. Immunotactoid deposition was first identified in the explanted liver and recurred in the allograft within only 7 weeks following transplantation, presenting as ascites with normal liver function tests. The patient's posttransplant course was complicated by proteinuria and renal failure requiring dialysis. Histologic examination of both native and allograft livers demonstrated pink amorphous material occupying sinusoidal spaces that were Congo-red negative and immunoglobulin M Kappa-restricted. Electron microscopy revealed characteristic deposits of electron-dense bundles of hollow microtubules with a 40 nm diameter within the sinusoids and space of Disse, consistent with immunotactoids. Therapy of the patient's underlying plasma-cell dyscrasia utilizing a daratumumab-based regimen showed decreased serum paraproteins, resolution of ascites, and improved kidney function, no longer requiring dialysis, without inducing rejection. The patient continues to respond to treatment 10 months posttransplant.

Regulating the Surface State of Carbon Dots as Ultrahigh-Capacity Adsorbents for Water Treatment.

Adsorption is one of the most widely researched and highly effective methods for mitigating the environmental threat posed by recalcitrant dyes in aqueous solutions. This paper presents a solvent-free synthesis method for the rapid and large-scale production of nitrogen (N) and phosphorus (P) co-doped carbon dots (N, P-CDs) which possess specific surface states and outstanding dye adsorption properties. Compared to the undoped CDs, the N, P-CDs not only exhibit a higher yield of solid-state luminescence but also endow them with the efficient adsorption and removal of Congo red (CR) from water. Due to the synergistic effects of π-π stacking, hydrogen bonding and electrostatic attraction, the N, P-CDs exhibit an ultra-high adsorption capacity (3118.87 mg g-1) and a removal efficiency (97.4%, at 500 mg L-1) for CR, and also display excellent selective adsorption in both single-dye and dual-dye systems. This method offers a rational strategy for synthesizing novel CDs-based adsorbents for CR, which provides a demonstration for future dye adsorption studies and practical wastewater treatment applications of CDs.

Screening different solid supports for Pseudomonas aeruginosa biofilm formation and determining its efficiency for decolorization and degradation of congo red.

A global water crisis is emerging due to increasing levels of contaminated water and decreasing clean water supply on Earth. This study aims to address the removal of azo dye from wastewater to enable its reuse. Recently, utilizing microorganisms has been proven to be a practical choice for the remediation of azo dyes in wastewater. Hence, in this study, we employed a preformed biofilm of Pseudomonas aeruginosa on a solid support (called substrate) to degrade azo dyes. This process offers several advantages, such as stability, substrate portability, more biofilm production in less time, and efficient utilization of enzymes for remediation. From 50 ppm of initial Congo Red concentration, 75.74% decolorization was achieved within ten h using a preformed biofilm on a coverslip. A maximum of 52.27% decolorization was achieved using biofilm during its formation after 72 h of incubation. The Fourier-transform infrared (FTIR) spectroscopic analysis of Congo Red dye before and after remediation revealed a significant change in peak intensity, indicating dye degradation. Phytotoxicity studies performed by seed germination with Vigna radiata revealed that, after 5-7 days, almost 40% more seeds with longer root and shoot lengths were germinated in the presence of treated dye compared to the untreated one. This data indicated that the harmful Congo Red was successfully degraded to a non-toxic product by Pseudomonas aeruginosa biofilm grown on a glass substrate.

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action.

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

Bio-based composite from chitosan waste and clay for effective removal of Congo red dye from contaminated water: Experimental studies and theoretical insights.

Water pollution due to dyes in the textile industry is a serious environmental problem. During the finishing stage, Congo red (CR) dye, water-soluble, is released into wastewater, polluting the water body. This study explores the effectiveness of utilizing a composite composed of Safi raw clay and chitosan to remove an anionic dye from synthetic wastewater. The chitosan was extracted from crab shells. Its removal performance was compared to that of natural clay. Both the composite and raw clay were used to remove target pollutant. The effects of the chitosan load in the composite, size particles, initial dye concentration, contact time, pH, and temperature on the dye's elimination were tested in batch modes. The composite with 30% (w/w) of chitosan exhibited the highest dye removal. At pH 2, an adsorption capacity of 84.74 mg/g was achieved, indicating that the grafting of the polymer onto clay surface enhances its efficacity and stability in acidic environments. This finding was supported by characterization data obtained from X-ray diffraction (XRD), scanning electron microscopy (SEM), dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) analyses. Under optimized conditions of 20 mg dose, pH 2, 30 min of reaction time, and 20 mg/L of dye concentration, about 92% of dye removal was achieved. The Langmuir isotherm model represents dye adsorption by the composite, while dye removal was controlled by pseudo-second-order model. Thermodynamic data of the adsorption (ΔH = +8.82 kJ/mol; ΔG <0) suggested that the dye adsorption was spontaneous and endothermic. The findings provide insights into the dye elimination by the adsorbent, indicating that the removal occurred via attractive colombic forces, as confirmed by density functional theory (DFT) analysis. Overall, the composite of natural clays and chitosan waste is a promising and innovative adsorbent for treating wastewater containing recalcitrant dyes.

Pyto-Architechture of Ag, Au and Ag-Au bi-metallic nanoparticles using waste orange peel extract for enable carcinogenic Congo red dye degradation.

Ecologically inspired to develop silver, gold and silver/gold bimetallic nanoparticles from discarded orange peel extract. The plant-derived compounds included in discarded orange peel extract have been accountable for the development of Ag, Au and Ag-Au bimetallic nanoparticles, that might be used in the biosynthetic process. The qualitative assessment of developed silver, gold and silver/gold bimetallic nanoparticles has been performed by UV-visible, XRD pattern, FT IR analysis, TEM/HRTEM, EDX and BET isotherm analysis. In this investigation, the photocatalytic effect of developed silver, gold and silver/gold bimetallic nanoparticles on Congo red dye breakdown efficiency was achieved at 96%, 94%, and 99.2%, respectively. Due to prolonged electron-hole recombination process was investigated using UV irradiation and reused for up to 5 consecutive runs without significant loss of photocatalytic activity. Moreover, silver, gold, and silver/gold bimetallic nanoparticles manufactured in an environmentally benign manner could potentially contribute to the ecological cleanup.

Green waste immobilized Ag/Cu feather like Bi-matrix on garment dye decomposes and their bio-efficacy.

This paper describes a simple phyto-remediation of feather-like silver/copper bi-matrix (BMs) was constructed by employing pommagrant waste peel (PWP) extract as crucial role of reducing agent and chelating agents. Numerous strategies, including UV-Visible, XRD, SEM-EDX, and TEM and BET isotherm were used to analysis the optical, structural, surface area and functional properties. Ag/Cu BPNMs of TEM characterization shows feather-like architectural features with constrained size and shape. The Ag/Cu co-catalytic nanoparticles have a particle size of 34-64 nm. The photocatalytic efficiency of Ag/Cu BMs was investigated using a garment dye, Congo red (CR), at successive time intervals under halogen lamp exposure. For Ag/Cu bimetallic nanoparticles, the photocatalytic degradation rate was recorded to be 100% after 40 min which is caused by adsorption of Congo red dye molecules on Ag/Cu and their degradation by reactive oxygen species (ROS). ROS are free hydroxyl radicals such as •OH and O2• ions that have high oxidizing capacity. The developed Ag/Cu BMs shown effective bacteriostatic action against many infections.

Benign-by-design plant extract-mediated preparation of copper oxide nanoparticles for environmentally related applications.

A facile, cost-competitive, scalable and novel synthetic approach is used to prepare copper oxide (CuO) nanoparticles (NPs) using Betel leaf (Piper betle) extracts as reducing, capping, and stabilizing agents. CuO-NPs were characterized using various analytical techniques, including Fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), as well as photoluminescence (PL) measurements. The activity of CuO-NPs was investigated towards Congo red dye degradation, supercapacitor energy storage and antibacterial activity. A maximum of 89% photodegradation of Congo red dye (CR) was obtained. The nanoparticle modified electrode also exhibited a specific capacitance (Csp) of 179 Fg-1. Furthermore, the antibacterial potential of CuO NPs was evaluated against Bacillus subtilis and Pseudomonas aeruginosa, both strains displaying high antibacterial performance.

Unveiling the remarkable simultaneous adsorption-photocatalytic potential of Ag nanoparticles-anchored phosphotungestic acid loaded ZIF-8 for Congo red removal.

This research paper presents a direct approach to synthesize AgNPs deposited on polyoxometalate/ZIF-8 on-site (referred to as AgNPS@PW@ZIF-8) to develop a highly efficient photocatalyst in the water treatment. Phosphotungestic acid (PW) serves a multi-purpose in this context: it acts as a bridge layer between AgNPs and Zeolitic Imidazolate Framework-8 (ZIF-8), a local reducing agent, and a catalyst for electron transfer during the photocatalysis process. A comprehensive characterization of the resulting nanostructure was performed utilizing an array of techniques, such as XRD, FTIR, EDX, TEM, BET, Raman, and TGA. The nanostructure that was created exhibited effective removal of Congo red at different pH levels via a combination of simultaneous adsorption and photocatalysis. After 60 min at pH 7, the dye molecules were completely eliminated in the presence of 0.5 g/L AgNPS@PW@ZIF-8 at room temperature. The charge transfer can be facilitated by the PW bridge layer connecting AgNPs and ZIF-8, owing to the photoactive characteristics and strong electron transfer capabilities of PW molecules. Strong electron transferability of PW between Ag nanoparticles and ZIF-8 facilitates charge transfer and significantly improves the photocatalytic performance of ZIF-8. Moreover, the nanostructure demonstrated great structural stability and recyclability, sustaining a high efficiency of removal throughout five consecutive cycles through the implementation of a simple procedure. Widespread applications of the developed nanostructure in aquatic environments for adsorption and photocatalytic reactions are possible.

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study.

Wastewater textile dye treatment is a challenge that requires the development of eco-friendly technology to avoid the alarming problems associated with water scarcity and health-environment. This study investigated the potential of phengite clay as naturally low-cost abundant clay from Tamgroute, Morocco (TMG) that was activated with a 0.1 M NaOH base (TMGB) after calcination at 850 °C for 3 h (TMGC) before its application in the Congo red (CR) anionic dye from the aqueous solution. The effect of various key operational parameters: adsorbent dose, contact time, dye concentration, pH, temperature, and the effect of salts, was studied by a series of adsorption experiments in a batch system, which affected the adsorption performance of TMG, TMGC, and TMGB for CR dye removal. In addition, the properties of adsorption kinetics, isotherms, and thermodynamics were also studied. Experimental results showed that optimal adsorption occurred at an acidic pH. At a CR concentration of 100 mg L-1, equilibrium elimination rates were 68%, 38%, and 92% for TMG, TMGC, and TMGB, respectively. The adsorption process is rapid, follows pseudo-second-order kinetics, and is best described by a Temkin and Langmuir isotherm. The thermodynamic parameters indicated that the adsorption of CR onto TMGB is endothermic and spontaneous. The experimental values of CR adsorption on TMGB are consistent with the predictions of the response surface methodology. These led to a maximum removal rate of 99.97% under the following conditions: pH = 2, TMGB dose of 7 g L-1, and CR concentration of 50 mg L-1. The adsorbent TMGB's relatively low preparation cost of around $2.629 g-1 and its ability to regenerate in more than 6 thermal calcination cycles with a CR removal rate of around 56.98%, stimulate its use for textile effluent treatment on a pilot industrial scale.

Enterocolic granulomatous phlebitis associated with epidermal growth factor-containing fibulin-like extracellular matrix protein 1 deposition and focal amyloid properties: A case report.

A woman in her 60s with rheumatoid arthritis was admitted with fever and abdominal pain. Laparoscopic examination with the differential diagnosis of peritoneal neoplasm and infection revealed granulomatous phlebitis in the resected greater omentum. Amorphous eosinophilic deposits observed in the resected tissue exhibited focal, weak positivity for Congo red but were strongly positive for thioflavin S, confirming their focal amyloid properties. Marked degeneration of elastic fibers was also evident. Electron microscopy revealed deposits around the affected elastic fibers. Immunohistochemistry revealed the deposition of epidermal growth factor-containing fibulin-like extracellular matrix protein 1 (EFEMP1) along with T-cell-predominant lymphocytic inflammation. The definitive diagnosis was granulomatous enterocolic lymphocytic phlebitis (ELP) associated with EFEMP1 deposition exhibiting focal amyloid properties (EFEMP1/AEFEMP1), supported by proteomics analysis. This type of vasculitis is similar to amyloid-ß-related angiitis of the central nervous system. Thus, we speculate that granulomatous ELP also results from an immune response that recognizes EFEMP1/AEFEMP1 deposits as foreign material and attempts to remove them. Confirmation of EFEMP1/AEFEMP1 deposition with Congo red staining is challenging, particularly in the presence of inflammation, and warrants comprehensive evaluation.

Classification of amyloidosis and protein misfolding disorders in animals 2024: A review on pathology and diagnosis.

Amyloidosis is a group of diseases in which proteins become amyloid, an insoluble fibrillar aggregate, resulting in organ dysfunction. Amyloid deposition has been reported in various animal species. To diagnose and understand the pathogenesis of amyloidosis, it is important to identify the amyloid precursor protein involved in each disease. Although 42 amyloid precursor proteins have been reported in humans, little is known about amyloidosis in animals, except for a few well-described amyloid proteins, including amyloid A (AA), amyloid light chain (AL), amyloid ß (Aß), and islet amyloid polypeptide-derived amyloid. Recently, several types of novel amyloidosis have been identified in animals using immunohistochemistry and mass spectrometry-based proteomic analysis. Certain species are predisposed to specific types of amyloidosis, suggesting a genetic background for its pathogenesis. Age-related amyloidosis has also emerged due to the increased longevity of captive animals. In addition, experimental studies have shown that some amyloids may be transmissible. Accurate diagnosis and understanding of animal amyloidosis are necessary for appropriate therapeutic intervention and comparative pathological studies. This review provides an updated classification of animal amyloidosis, including associated protein misfolding disorders of the central nervous system, and the current understanding of their pathogenesis. Pathologic features are presented together with state-of-the-art diagnostic methods that can be applied for routine diagnosis and identification of novel amyloid proteins in animals.

Synergistic degradation of Congo Red by hybrid advanced oxidation via ultraviolet light, persulfate, and hydrodynamic cavitation.

In the present study, hybrid activation of sodium peroxydisulfate (PS) by hydrodynamic cavitation and ultraviolet radiation was investigated for Congo Red (CR) degradation. Experiments were conducted using the Box-Benken design on inlet pressure (2-6 bar), PS concentration (0-50 mg. L-1) and UV radiation power (0-32 W). According to the results, at the optimum point where the pressure, PS concentration and UV radiation power were equal to 4.5 bar, 30 mg. L-1 and 16 W respectively, 92.01% of decolorization was achieved. Among the investigated processes, HC/UV/PS was the best process with the rate constant and synergetic coefficient of 38.6 × 10-3 min-1 and 2.76, respectively. At the optimum conditions, increasing the pollutant concentration from 20 mg. L-1 to 80 mg. L-1 decrease degradation rate from 92.01 to 45.21. Presence of natural organic mater (NOM) in all concentrations inhibited the CR degradation. Quenching experiments revealed that in the HC/UV/PS hybrid AOP free radicals accounted for 63.4% of the CR degradation, while the contribution of sulfate (SRs) and hydroxyl radicals (HRs) was 53.1% and 46.9%, respectively.

Sorption Behavior of Azo Dye Congo Red onto Activated Biochar from Haematoxylum campechianum Waste: Gradient Boosting Machine Learning-Assisted Bayesian Optimization for Improved Adsorption Process.

This work aimed to describe the adsorption behavior of Congo red (CR) onto activated biochar material prepared from Haematoxylum campechianum waste (ABHC). The carbon precursor was soaked with phosphoric acid, followed by pyrolysis to convert the precursor into activated biochar. The surface morphology of the adsorbent (before and after dye adsorption) was characterized by scanning electron microscopy (SEM/EDS), BET method, X-ray powder diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) and, lastly, pHpzc was also determined. Batch studies were carried out in the following intervals of pH = 4-10, temperature = 300.15-330.15 K, the dose of adsorbent = 1-10 g/L, and isotherms evaluated the adsorption process to determine the maximum adsorption capacity (Qmax, mg/g). Kinetic studies were performed starting from two different initial concentrations (25 and 50 mg/L) and at a maximum contact time of 48 h. The reusability potential of activated biochar was evaluated by adsorption-desorption cycles. The maximum adsorption capacity obtained with the Langmuir adsorption isotherm model was 114.8 mg/g at 300.15 K, pH = 5.4, and a dose of activated biochar of 1.0 g/L. This study also highlights the application of advanced machine learning techniques to optimize a chemical removal process. Leveraging a comprehensive dataset, a Gradient Boosting regression model was developed and fine-tuned using Bayesian optimization within a Python programming environment. The optimization algorithm efficiently navigated the input space to maximize the removal percentage, resulting in a predicted efficiency of approximately 90.47% under optimal conditions. These findings offer promising insights for enhancing efficiency in similar removal processes, showcasing the potential of machine learning in process optimization and environmental remediation.

Clinicopathological Appearance of Epidermal Growth-Factor-Containing Fibulin-like Extracellular Matrix Protein 1 Deposition in the Lower Gastrointestinal Tract: An Autopsy-Based Study.

This study examined the patterns of epidermal growth-factor-containing fibulin-like extracellular matrix protein 1 (EFEMP1) deposition in the small intestine and colon to evaluate the association between the histopathological severity of EFEMP1 deposition and constipation and determine the colocalization of amyloid transthyretin (ATTR) and EFEMP1 deposits. In 40 older cases (≥80 years of age), EFEMP1 deposition in the small intestine initiated in the submucosal and subserous vessels, subserous interstitium, and serosa (early stage), progressing to the muscularis propria and peri-Auerbach plexus area (intermediate stage), and finally spreading diffusely to other areas, excluding the mucosa and muscularis mucosa (advanced stage). The colon had a similar pattern of progression. During the middle-to-advanced stages, amyloid formation was observed in some vascular and serous deposits. A subgroup of cases was identified in which EFEMP1 deposition was the only presumed cause of constipation. Additionally, we demonstrated the colocalization of ATTR and EFEMP1 deposition. Apple-green birefringence was detected under polarized light only in approximately one-half of the cases in the small intestine and one-third of the cases in the colon. These findings strongly suggest that EFEMP1 deposits are correlated with pathological conditions of the lower gastrointestinal tract. As the histopathological diagnosis using Congo red-stained specimens is challenging, the combined use of elastic fiber staining and EFEMP1 immunohistochemistry is recommended to identify EFEMP1 deposition.

Reconstructing Kaolinite Compounds for Remarkably Enhanced Adsorption of Congo Red.

Organic dyes are widely used in many important areas, but they also bring many issues for water pollution. To address the above issues, a reconstructed kaolinite hybrid compound (γ-AlOOH@A-Kaol) was obtained from raw kaolinite (Kaol) in this work. The product was then characterized by X-ray diffraction (XRD), Fourier-transform infrared (ATR-FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM), and the absorption properties of γ-AlOOH@A-Kaol for congo red were further studied. The results demonstrated that flower-like γ-AlOOH with nanolamellae were uniformly loaded on the surface of acid-treated Kaol with a porous structure (A-Kaol). In addition, the surface area (36.5 m2/g), pore volume (0.146 cm3/g), and pore size (13.0 nm) of γ-AlOOH@A-Kaol were different from those of A-Kaol (127.4 m2/g, 0.127 cm3/g, and 4.28 nm, respectively) and γ-AlOOH (34.1 m2/g, 0.315 cm3/g, and 21.5 nm, respectively). The unique structure could significantly enhance the sorption capacity for congo red, which could exceed 1000 mg/g. The reasons may be ascribed to the abundant groups of -OH, large specific surface area, and porous structure of γ-AlOOH@A-Kaol. This work provides an efficient route for comprehensive utilization and production of Kaol-based compound materials that could be used in the field of environmental conservation.

Activated Iron-Porous Carbon Nanomaterials as Adsorbents for Methylene Blue and Congo Red.

The adsorption properties of microporous carbon materials modified with iron citrate were investigated. The carbon materials were produced based on resorcinol-formaldehyde resin, treated in a microwave assisted solvothermal reactor, and next carbonized in the tube furnace at a temperature of 700 °C under argon atmosphere. Iron citrate was applied as a modifier, added to the material precursor before the synthesis in the reactor, in the quantity enabling to obtain the nanocomposites with C:Fe mass ratio equal to 10:1. Some samples were additionally activated using potassium oxalate or potassium hydroxide. The phase composition of the produced nanocomposites was determined using the X-ray diffraction method. Scanning and transmission electron microscopy was applied to characterize the changes in samples' morphology resulting from the activation process and/or the introduction of iron into the carbon matrix. The adsorption of nitrogen from gas phase and dyes (methylene blue and congo red) from water solution on the obtained materials was investigated. In the case of methylene blue, the adsorption equilibrium isotherms followed the Langmuir isotherm model. However, in the case of congo red, a linear dependency of adsorption and concentration in a broad equilibrium concentration range was found and well-described using the Henry equation. The most efficient adsorption of methylene blue was noticed for the sample activated with potassium hydroxide and modified with iron citrate, and a maximum adsorption capacity of 696 mg/g was achieved. The highest congo red adsorption was noticed for the non-activated sample modified with iron citrate, and the partition coefficient for this material equaled 171 dm3/g.

Fabrication of an Fe-Doped ZIF-67 Derived Magnetic Fe/Co/C Composite for Effective Removal of Congo Red.

The dyes in printing and dyeing wastewater are harmful to the human body and the environment. It is essential to develop practical and effective adsorbents to deal with them. In this study, an Fe-doped, ZIF-67 derived Fe/Co/C composite material with strong magnetism was successfully synthesized. The effects of pH, initial concentration, and adsorption time on the properties of the adsorbent were investigated. To further improve the removal efficiency and enhance the practicality, potassium peroxymonosulfate (PMS) was added to the system due to its Fenton-like effect. Then, an Fe/Co/C composite was used with PMS to remove Congo red (CR) with a 98% removal of 250 mg·L-1. Moreover, for its high saturation magnetization of 85.4 emu·g-1, the Fe/Co/C composite can be easily recovered by applying a magnetic field, solving the problem that powdery functional materials are difficult to recover and, thus, avoiding secondary pollution. Furthermore, since the composite material was doped before carbonization, this synthetic strategy is flexible and the required metal elements can be added at will to achieve different purposes. This study demonstrates that this Fe-doped, ZIF-67 derived magnetic material has potential application prospects for dye adsorption.

Insights into Transfer of Supramolecular Doxorubicin/Congo Red Aggregates through Phospholipid Membranes.

Doxorubicin (DOX) is a commonly used chemotherapeutic drug, from the anthracycline class, which is genotoxic to neoplastic cells via a DNA intercalation mechanism. It is effective and universal; however, it also causes numerous side effects. The most serious of them are cardiotoxicity and a decrease in the number of myeloid cells. For this reason, targeted DOX delivery systems are desirable, since they would allow lowering the drug dose and therefore limiting systemic side effects. Recently, synthetic dyes, in particular Congo red (CR), have been proposed as possible DOX carriers. CR is a planar molecule, built of a central biphenyl moiety and two substituted naphthalene rings, connected with diazo bonds. In water, it forms elongated ribbon-shaped supramolecular structures, which are able to selectively interact with immune complexes. In our previous studies, we have shown that CR aggregates can intercalate DOX molecules. In this way, they preclude DOX precipitation in water solutions and increase its uptake by MCF7 breast cancer cells. In the present work, we further explore the interactions between DOX, CR, and their aggregates (CR/DOX) with phospholipid membranes. In addition to neutral molecules, the protonated doxorubicin form, DXP, is also studied. Molecular dynamics simulations are employed to study the transfer of CR, DOX, DXP, and their aggregates through POPC bilayers. Interactions of CR, DOX, and CR/DOX with model monolayers are studied with Langmuir trough measurements. This study shows that CR may support the transfer of doxorubicin molecules into the bilayer. Both electrostatic and van der Waals interactions with lipids are important in this respect. The former promote the initial stages of the insertion process, the latter keep guest molecules inside the bilayer.

Study of the Preparation and Performance of TiO2-Based Magnetic Regenerative Adsorbent.

Against the backdrop of "carbon neutrality", the green treatment of dye wastewater is particularly important. Currently, the adsorption method shows strong application prospects. Therefore, selecting efficient and recyclable adsorbents is of significant importance. TiO2 is an excellent adsorbent, but its difficult recovery often leads to secondary pollution. γ-Fe2O3-modified coal-series kaolin exhibits both excellent adsorption properties and rapid separation through magnetic separation technology. By utilizing the synergistic effects of both, TiO2/-γFe2O3 coal-series kaolin, magnetic adsorbent regeneration materials were prepared using coprecipitation method and characterized. The influencing factors of this functional material on the adsorption of Congo red dye and its regeneration performance are discussed. The experimental results indicated that the specific surface area, pore volume and Ms value of this functional material are 127.5 m2/g, 0.38 cm3/g, and 13.4 emu/g, respectively. It exhibits excellent adsorption characteristics towards Congo red, with an adsorption rate reaching 96.8% within 10 min, conforming to the pseudo-second-order kinetic model, and demonstrating Langmuir IV-type monolayer adsorption. After the adsorption of Congo red, magnetic separation shows superior efficiency. Furthermore, treatment of the adsorbed composite with EDTA allows for recycling, with adsorption rates still above 91% after three cycles, indicating an excellent regeneration capability.