DeepMiceTL: a deep transfer learning based prediction of mice cardiac conduction diseases using early electrocardiograms.

Cardiac conduction disease is a major cause of morbidity and mortality worldwide. There is considerable clinical significance and an emerging need of early detection of these diseases for preventive treatment success before more severe arrhythmias occur. However, developing such early screening tools is challenging due to the lack of early electrocardiograms (ECGs) before symptoms occur in patients. Mouse models are widely used in cardiac arrhythmia research. The goal of this paper is to develop deep learning models to predict cardiac conduction diseases in mice using their early ECGs. We hypothesize that mutant mice present subtle abnormalities in their early ECGs before severe arrhythmias present. These subtle patterns can be detected by deep learning though they are hard to be identified by human eyes. We propose a deep transfer learning model, DeepMiceTL, which leverages knowledge from human ECGs to learn mouse ECG patterns. We further apply the Bayesian optimization and $k$-fold cross validation methods to tune the hyperparameters of the DeepMiceTL. Our results show that DeepMiceTL achieves a promising performance (F1-score: 83.8%, accuracy: 84.8%) in predicting the occurrence of cardiac conduction diseases using early mouse ECGs. This study is among the first efforts that use state-of-the-art deep transfer learning to identify ECG patterns during the early course of cardiac conduction disease in mice. Our approach not only could help in cardiac conduction disease research in mice, but also suggest a feasibility for early clinical diagnosis of human cardiac conduction diseases and other types of cardiac arrythmias using deep transfer learning in the future.

Callous-unemotional traits and pre-ejection period in response to reward.

Callous-unemotional (CU) traits have important utility in distinguishing individuals exhibiting more severe and persistent antisocial behavior, and our understanding of reward processing and CU traits contributes to behavioral modification. However, research on CU traits often investigated reward alongside punishment and examined solely on average reward reactivity, neglecting the reward response pattern over time such as habituation. This study assessed individuals' pre-ejection period (PEP), a sympathetic nervous system cardiac-linked biomarker with specificity to reward, during a simple reward task to investigate the association between CU traits and both average reward reactivity and reward response pattern over time (captured as responding trajectory). A heterogeneous sample of 126 adult males was recruited from a major metropolitan area in the US. Participants reported their CU traits using the Inventory of Callous-Unemotional Traits and completed a simple reward task while impedance cardiography and electrocardiogram were recorded to derive PEP. The results revealed no significant association between average PEP reward reactivity and CU traits. However, CU traits predicted both linear and quadratic slopes of the PEP reactivity trajectory: individuals with higher CU traits had slower habituation initially, followed by a rapid habituation in later blocks. Findings highlight the importance of modeling the trajectory of PEP reward response when studying CU traits. We discussed the implications of individuals with high CU traits having the responding pattern of slower initial habituation followed by rapid habituation to reward and the possible mechanisms.

Exploring a new frontier in cardiac diagnosis: ECG analysis enhanced by machine learning and parametric quartic spline modeling.

The heart's study holds paramount importance in human physiology, driving valuable research in cardiovascular health. However, assessing Electrocardiogram (ECG) analysis techniques poses challenges due to noise and artifacts in authentic recordings. The advent of machine learning systems for automated diagnosis has heightened the demand for extensive data, yet accessing medical data is hindered by privacy concerns. Consequently, generating artificial ECG signals faithful to real ones is a formidable task in biomedical signal processing. This paper introduces a method for ECG signal modeling using parametric quartic splines and generating a new dataset based on the modeled signals. Additionally, it explores ECG classification using three machine learning techniques facilitated by Orange software, addressing both normal and abnormal sinus rhythms. The classification enables early detection and prediction of heart-related ailments, facilitating timely clinical interventions and improving patient outcomes. The assessment of synthetic signal quality is conducted through power spectrum analysis and cross-correlation analysis, power spectrum analysis of both real and synthetic ECG waves provides a quantitative assessment of their frequency content, aiding in the validation and evaluation of synthetic ECG signal generation techniques. Cross-correlation analysis revealing a robust correlation coefficient of 0.974 and precise alignment with a negligible time lag of 0.000 s between the synthetic and real ECG signals. Overall, the adoption of quartic spline interpolation in ECG modeling enhances the precision, smoothness, and fidelity of signal representation, thereby improving the effectiveness of diagnostic and analytical tasks in cardiology. Three prominent machine learning algorithms, namely Decision Tree, Logistic Regression, and Gradient Boosting, effectively classify the modeled ECG signals with classification accuracies of 0.98620, 0.98965, and 0.99137, respectively. Notably, all models exhibit robust performance, characterized by high AUC values and classification accuracy. While Gradient Boosting and Logistic Regression demonstrate marginally superior performance compared to the Decision Tree model across most metrics, all models showcase commendable efficacy in ECG signal classification. The study underscores the significance of accurate ECG modeling in health sciences and biomedical technology, offering enhanced accuracy and flexibility for improved cardiovascular health understanding and diagnostic tools.

Comparative analysis of parametric B-spline and Hermite cubic spline based methods for accurate ECG signal modeling.

Analyzing Electrocardiogram (ECG) signals is imperative for diagnosing cardiovascular diseases. However, evaluating ECG analysis techniques faces challenges due to noise and artifacts in actual signals. Machine learning for automatic diagnosis encounters data acquisition hurdles due to medical data privacy constraints. Addressing these issues, ECG modeling assumes a crucial role in biomedical and parametric spline-based methods have garnered significant attention for their ability to accurately represent the complex temporal dynamics of ECG signals. This study conducts a comparative analysis of two parametric spline-based methods-B-spline and Hermite cubic spline-for ECG modeling, aiming to identify the most effective approach for accurate and reliable ECG representation. The Hermite cubic spline serves as one of the most effective interpolation methods, while B-spline is an approximation method. The comparative analysis includes both qualitative and quantitative evaluations. Qualitative assessment involves visually inspecting the generated spline-based models, comparing their resemblance to the original ECG signals, and employing power spectrum analysis. Quantitative analysis incorporates metrics such as root mean square error (RMSE), Percentage Root Mean Square Difference (PRD) and cross correlation, offering a more objective measure of the model's performance. Preliminary results indicate promising capabilities for both spline-based methods in representing ECG signals. However, the analysis unveils specific strengths and weaknesses for each method. The B-spline method offers greater flexibility and smoothness, while the cubic spline method demonstrates superior waveform capturing abilities with the preservation of control points, a critical aspect in the medical field. Presented research provides valuable insights for researchers and practitioners in selecting the most appropriate method for their specific ECG modeling requirements. Adjustments to control points and parameterization enable the generation of diverse ECG waveforms, enhancing the versatility of this modeling technique. This approach has the potential to extend its utility to other medical signals, presenting a promising avenue for advancing biomedical research.

Why do we keep missing left circumflex artery myocardial infarctions?

BACKGROUND: Diagnosis of left circumflex artery (LCx) myocardial infarctions via 12­lead electrocardiogram (ECG) has posed a challenge to healthcare professionals for many years. METHODS AND RESULTS: A retrospective observational study was performed to analyze patients admitted with myocardial infarction. The study used electronic medical records and specific ICD-10 codes to identify eligible patients, resulting in 2032 encounters. After independent adjudication of cardiac biomarkers, coronary angiography, and electrocardiographic changes, a final patient population of 58 encounters with acute occlusion myocardial infarction (OMI) with a culprit LCx lesion was established. OMI was defined as a lesion with either thrombolysis in myocardial infarction flow (TIMI) 0-2 or TIMI 3 with Troponin I > 1 ng/mL (Reference range 0.00-0.03 ng/mL). ECGs of these patients were then independently evaluated and grouped into 8 different classifications based on the presence or absence of ST elevation and/or depression in corresponding leads. ECG patterns and anatomical characteristics (proximal or distal to the first obtuse marginal artery) of the LCx lesions were then correlated. The appropriateness of triage and delay in reperfusion therapy were also assessed. Those with a left dominant or codominant circulation, and with LCx lesions proximal to the first obtuse marginal artery, were more likely to present with no or subtle ST-segment changes that led to delays in reperfusion therapy. CONCLUSIONS: Patients with left or codominant coronary artery circulation, with OMI proximal to the first obtuse marginal artery, may be less likely to have "classic" findings of ST-segment elevation on ECG due to cancellation forces in the limb leads.

An Optimal, Power Efficient, Internet of Medical Things Framework for Monitoring of Physiological Data Using Regression Models.

The sensors used in the Internet of Medical Things (IoMT) network run on batteries and need to be replaced, replenished or should use energy harvesting for continuous power needs. Additionally, there are mechanisms for better utilization of battery power for network longevity. IoMT networks pose a unique challenge with respect to sensor power replenishment as the sensors could be embedded inside the subject. A possible solution could be to reduce the amount of sensor data transmission and recreate the signal at the receiving end. This article builds upon previous physiological monitoring studies by applying new decision tree-based regression models to calculate the accuracy of reproducing data from two sets of physiological signals transmitted over cellular networks. These regression analyses are then executed over three different iteration varieties to assess the effect that the number of decision trees has on the efficiency of the regression model in question. The results indicate much lower errors as compared to other approaches indicating significant saving on the battery power and improvement in network longevity.

Characterization of Heart Diseases per Single Lead Using ECG Images and CNN-2D.

Cardiopathy has become one of the predominant global causes of death. The timely identification of different types of heart diseases significantly diminishes mortality risk and enhances the efficacy of treatment. However, fast and efficient recognition necessitates continuous monitoring, encompassing not only specific clinical conditions but also diverse lifestyles. Consequently, an increasing number of studies are striving to automate and progress in the identification of different cardiopathies. Notably, the assessment of electrocardiograms (ECGs) is crucial, given that it serves as the initial diagnostic test for patients, proving to be both the simplest and the most cost-effective tool. This research employs a customized architecture of Convolutional Neural Network (CNN) to forecast heart diseases by analyzing the images of both three bands of electrodes and of each single electrode signal of the ECG derived from four distinct patient categories, representing three heart-related conditions as well as a spectrum of healthy controls. The analyses are conducted on a real dataset, providing noteworthy performance (recall greater than 80% for the majority of the considered diseases and sometimes even equal to 100%) as well as a certain degree of interpretability thanks to the understanding of the importance a band of electrodes or even a single ECG electrode can have in detecting a specific heart-related pathology.

QRS Detector Performance Evaluation Aware of Temporal Accuracy and Presence of Noise.

Algorithms for QRS detection are fundamental in the ECG interpretive processing chain. They must meet several challenges, such as high reliability, high temporal accuracy, high immunity to noise, and low computational complexity. Unfortunately, the accuracy expressed by missed or redundant events statistics is often the only parameter used to evaluate the detector's performance. In this paper, we first notice that statistics of true positive detections rely on researchers' arbitrary selection of time tolerance between QRS detector output and the database reference. Next, we propose a multidimensional algorithm evaluation method and present its use on four example QRS detectors. The dimensions are (a) influence of detection temporal tolerance, tested for values between 8.33 and 164 ms; (b) noise immunity, tested with an ECG signal with an added muscular noise pattern and signal-to-noise ratio to the effect of "no added noise", 15, 7, 3 dB; and (c) influence of QRS morphology, tested on the six most frequently represented morphology types in the MIT-BIH Arrhythmia Database. The multidimensional evaluation, as proposed in this paper, allows an in-depth comparison of QRS detection algorithms removing the limitations of existing one-dimensional methods. The method enables the assessment of the QRS detection algorithms according to the medical device application area and corresponding requirements of temporal accuracy, immunity to noise, and QRS morphology types. The analysis shows also that, for some algorithms, adding muscular noise to the ECG signal improves algorithm accuracy results.

Multi-center atrial fibrillation electrocardiogram (ECG) classification using Fourier space convolutional neural networks (FD-CNN) and transfer learning.

There has been a proliferation of machine learning (ML) electrocardiogram (ECG) classification algorithms reaching >85% accuracy for various cardiac pathologies. Despite the high accuracy at individual institutions, challenges remain when it comes to multi-center deployment. Transfer learning (TL) is a technique in which a model trained for a specific task is repurposed for another related task, in this case ECG ML model trained at one institution is fine-tuned to be utilized to classify ECGs at another institution. Models trained at one institution, however, might not be generalizable for accurate classification when deployed broadly due to differences in type, time, and sampling rate of traditional ECG acquisition. In this study, we evaluate the performance of time domain (TD) and frequency domain (FD) convolutional neural network (CNN) classification models in an inter-institutional scenario leveraging three different publicly available datasets. The larger PTB-XL ECG dataset was used to initially train TD and FD CNN models for atrial fibrillation (AFIB) classification. The models were then tested on two different data sets, Lobachevsky University Electrocardiography Database (LUDB) and Korea University Medical Center database (KURIAS). The FD model was able to retain most of its performance (>0.81 F1-score), whereas TD was highly affected (<0.53 F1-score) by the dataset variations, even with TL applied. The FD CNN showed superior robustness to cross-institutional variability and has potential for widespread application with no compromise to ECG classification performance.

Statistical heart rate variability analysis for healthy person: Influence of gender and body posture.

Short-term ECG-derived heart rate variability can assess autonomic function non-invasively. The purpose of this study is to investigate the influence of body posture and gender on parasympathetic-sympathetic balance by utilising electrocardiogram (ECG). A total of sixty participants including thirty males (95% CI: 23.34-26.32 years old) and thirty females (95% CI: 23.33-26.07 years old) voluntarily executed three sets of 5-min ECG recordings in supine, sitting and standing posture. A nonparametric Friedman test followed by Bonferroni post-hoc test was carried out to find the statistical differences between the group. A significant difference was observed for RR mean, low frequency (LF), high frequency (HF), ratio LF/HF and the ratio long term variability to short term variability (SD2/SD1) for p < 0.01 while respiration rate (Resp Rate), standard deviation of heart rate (STD_HR), long term variability (SD2), approximate entropy (ApEn), correlation dimension (CD) are non-significant (p > 0.01) for supine, sitting and standing. HRV indices such as standard deviation of NN (SDNN), HRV triangular index (HRVi), and triangular interpolation of NN interval (TINN) are statistically not significant for males but there are significant differences for females at a significance level 1%. Relative reliability and relatedness were evaluated through the interclass coefficient (ICC) and spearman correlation coefficient. The experimental results advocate that there is a posture-specific difference in HRV indices while the correlational studies suggest no such significant differences.

A denoising method of ECG signal based on variational autoencoder and masked convolution.

Wearable electrocardiogram (ECG) equipment can realize continuous monitoring of cardiovascular diseases, but these devices are more susceptible to interference from various noises, which will seriously reduce the diagnostic correctness. In this work, a novel noise reduction model for ECG signals is proposed based on variational autoencoder and masked convolution. The variational Bayesian inference is conducted to capture the global features of the ECG signals by encouraging the approximate posterior of the latent variables to fit the prior distribution, and we use the skip connection and feature concatenation to realize the information interaction across the channels. To strengthen the connection of local features of the ECG signals, the masked convolution module is used to extract local feature information, which supplement the global features and the noise reduction performance of whole model can be greatly improved. Experiments are carried out on the MIT-BIH arrythmia database, and the results display that the performance metrics of signal-to-noise ratio (SNR) and root mean square error (RMSE) are significantly improved compared with other approaches while causing less signal distortion.

Fourier space approach for convolutional neural network (CNN) electrocardiogram (ECG) classification: A proof-of-concept study.

There has been a proliferation of machine learning (ML) electrocardiogram (ECG) classification algorithms reaching > 85% accuracy for various cardiac pathologies. Although the accuracy within institutions might be high, models trained at one institution might not be generalizable enough for accurate detection when deployed in other institutions due to differences in type of signal acquisition, sampling frequency, time of acquisition, device noise characteristics and number of leads. In this proof-of-concept study, we leverage the publicly available PTB-XL dataset to investigate the use of time-domain (TD) and frequency-domain (FD) convolutional neural networks (CNN) to detect myocardial infarction (MI), ST/T-wave changes (STTC), atrial fibrillation (AFIB) and sinus arrhythmia (SARRH). To simulate interinstitutional deployment, the TD and FD implementations were also compared on adapted test sets using different sampling frequencies 50 Hz, 100 Hz and 250 Hz, and acquisition times of 5 s and 10s at 100 Hz sampling frequency from the training dataset. When tested on the original sampling frequency and duration, the FD approach showed comparable results to TD for MI (0.92 FD - 0.93 TD AUROC) and STTC (0.94 FD - 0.95 TD AUROC), and better performance for AFIB (0.99 FD - 0.86 TD AUROC) and SARRH (0.91 FD - 0.65 TD AUROC). Although both methods were robust to changes in sampling frequency, changes in acquisition time were detrimental to the TD MI and STTC AUROCs, at 0.72 and 0.58 respectively. Alternatively, the FD approach was able to maintain the same level of performance, and, therefore, showed better potential for interinstitutional deployment.

Electrocardiogram-Based Biometric Identification Using Mixed Feature Extraction and Sparse Representation.

(1) Background: The ability to recognize identities is an essential component of security. Electrocardiogram (ECG) signals have gained popularity for identity recognition because of their universal, unique, stable, and measurable characteristics. To ensure accurate identification of ECG signals, this paper proposes an approach which involves mixed feature sampling, sparse representation, and recognition. (2) Methods: This paper introduces a new method of identifying individuals through their ECG signals. This technique combines the extraction of fixed ECG features and specific frequency features to improve accuracy in ECG identity recognition. This approach uses the wavelet transform to extract frequency bands which contain personal information features from the ECG signals. These bands are reconstructed, and the single R-peak localization determines the ECG window. The signals are segmented and standardized based on the located windows. A sparse dictionary is created using the standardized ECG signals, and the KSVD (K-Orthogonal Matching Pursuit) algorithm is employed to project ECG target signals into a sparse vector-matrix representation. To extract the final representation of the target signals for identification, the sparse coefficient vectors in the signals are maximally pooled. For recognition, the co-dimensional bundle search method is used in this paper. (3) Results: This paper utilizes the publicly available European ST-T database for our study. Specifically, this paper selects ECG signals from 20, 50 and 70 subjects, each with 30 testing segments. The method proposed in this paper achieved recognition rates of 99.14%, 99.09%, and 99.05%, respectively. (4) Conclusion: The experiments indicate that the method proposed in this paper can accurately capture, represent and identify ECG signals.

Hybrid CNN-SVR Blood Pressure Estimation Model Using ECG and PPG Signals.

Continuous blood pressure (BP) measurement is vital in monitoring patients' health with a high risk of cardiovascular disease. The complex and dynamic nature of the cardiovascular system can influence BP through many factors, such as cardiac output, blood vessel wall elasticity, circulated blood volume, peripheral resistance, respiration, and emotional behavior. Yet, traditional BP measurement methods in continuously estimating the BP are cumbersome and inefficient. This paper presents a novel hybrid model by integrating a convolutional neural network (CNN) as a trainable feature extractor and support vector regression (SVR) as a regression model. This model can automatically extract features from the electrocardiogram (ECG) and photoplethysmography (PPG) signals and continuously estimates the systolic blood pressure (SBP) and diastolic blood pressure (DBP). The CNN takes the correct topology of input data and establishes the relationship between ECG and PPG features and BP. A total of 120 patients with available ECG, PPG, SBP, and DBP data are selected from the MIMIC III database to evaluate the performance of the proposed model. This novel model achieves an overall Mean Absolute Error (MAE) of 1.23 ± 2.45 mmHg (MAE ± STD) for SBP and 3.08 ± 5.67 for DBP, all of which comply with the accuracy requirements of the AAMI SP10 standard.

Electrocardiogram Heartbeat Classification for Arrhythmias and Myocardial Infarction.

An electrocardiogram (ECG) is a basic and quick test for evaluating cardiac disorders and is crucial for remote patient monitoring equipment. An accurate ECG signal classification is critical for real-time measurement, analysis, archiving, and transmission of clinical data. Numerous studies have focused on accurate heartbeat classification, and deep neural networks have been suggested for better accuracy and simplicity. We investigated a new model for ECG heartbeat classification and found that it surpasses state-of-the-art models, achieving remarkable accuracy scores of 98.5% on the Physionet MIT-BIH dataset and 98.28% on the PTB database. Furthermore, our model achieves an impressive F1-score of approximately 86.71%, outperforming other models, such as MINA, CRNN, and EXpertRF on the PhysioNet Challenge 2017 dataset.

Quality Indexes of the ECG Signal Transmitted Using Optical Wireless Link.

This work relates to the quality of the electrocardiogram (ECG) signal of an elderly person, transmitted using optical wireless links. The studied system uses infrared signals between an optical transmitter located on the person's wrist and optical receivers placed on the ceiling. As the elderly person moves inside a room, the optical channel is time-varying, affecting the received ECG signal. To assess the ECG quality, we use specific signal quality indexes (SQIs), allowing the evaluation of the spectral and statistical characteristics of the signal. Our main contribution is studying how the SQIs behave according to the optical transmission performance and the studied context in order to determine the conditions required to obtain excellent quality indexes. The approach is based on the simulation of the whole chain, from the raw ECG to the extraction process after transmission until the evaluation of SQIs. This technique was developed considering optical channel modeling, including the mobility of the elderly. The obtained results show the potential of optical wireless communication technologies for reliable ECG monitoring in such a context. It has been observed that excellent ECG quality can be obtained with a minimum SNR of 11 dB for on-off keying modulation.

Signal Quality Analysis of Single-Arm Electrocardiography.

The number of people experiencing mental stress or emotional dysfunction has increased since the onset of the COVID-19 pandemic, as many individuals have had to adapt their daily lives. Numerous studies have demonstrated that mental health disorders can pose a risk for certain diseases, and they are also closely associated with the problem of mental workload. Now, wearable devices and mobile health applications are being utilized to monitor and assess individuals' mental health conditions on a daily basis using heart rate variability (HRV), typically measured by the R-to-R wave interval (RRI) of an electrocardiogram (ECG). However, portable or wearable ECG devices generally require two electrodes to perform bipolar limb leads, such as the Einthoven triangle. This study aims to develop a single-arm ECG measurement method, with lead I ECG serving as the gold standard. We conducted static and dynamic experiments to analyze the morphological performance and signal-to-noise ratio (SNR) of the single-arm ECG. Three morphological features were defined, RRI, the duration of the QRS complex wave, and the amplitude of the R wave. Thirty subjects participated in this study. The results indicated that RRI exhibited the highest cross-correlation (R = 0.9942) between the single-arm ECG and lead I ECG, while the duration of the QRS complex wave showed the weakest cross-correlation (R = 0.2201). The best SNR obtained was 26.1 ± 5.9 dB during the resting experiment, whereas the worst SNR was 12.5 ± 5.1 dB during the raising and lowering of the arm along the z-axis. This single-arm ECG measurement method offers easier operation compared to traditional ECG measurement techniques, making it applicable for HRV measurement and the detection of an irregular RRI.

Harnessing Wearable Devices for Emotional Intelligence: Therapeutic Applications in Digital Health.

Emotional intelligence strives to bridge the gap between human and machine interactions. The application of such systems varies and is becoming more prominent as healthcare services seek to provide more efficient care by utilizing smart digital health apps. One application in digital health is the incorporation of emotion recognition systems as a tool for therapeutic interventions. To this end, a system is designed to collect and analyze physiological signal data, such as electrodermal activity (EDA) and electrocardiogram (ECG), from smart wearable devices. The data are collected from different subjects of varying ages taking part in a study on emotion induction methods. The obtained signals are processed to identify stimulus trigger instances and classify the different reaction stages, as well as arousal strength, using signal processing and machine learning techniques. The reaction stages are identified using a support vector machine algorithm, while the arousal strength is classified using the ResNet50 network architecture. The findings indicate that the EDA signal effectively identifies the emotional trigger, registering a root mean squared error (RMSE) of 0.9871. The features collected from the ECG signal show efficient emotion detection with 94.19% accuracy. However, arousal strength classification is only able to reach 60.37% accuracy on the given dataset. The proposed system effectively detects emotional reactions and can categorize their arousal strength in response to specific stimuli. Such a system could be integrated into therapeutic settings to monitor patients' emotional responses during therapy sessions. This real-time feedback can guide therapists in adjusting their strategies or interventions.

A Residual-Dense-Based Convolutional Neural Network Architecture for Recognition of Cardiac Health Based on ECG Signals.

Cardiovascular disorders are often diagnosed using an electrocardiogram (ECG). It is a painless method that mimics the cyclical contraction and relaxation of the heart's muscles. By monitoring the heart's electrical activity, an ECG can be used to identify irregular heartbeats, heart attacks, cardiac illnesses, or enlarged hearts. Numerous studies and analyses of ECG signals to identify cardiac problems have been conducted during the past few years. Although ECG heartbeat classification methods have been presented in the literature, especially for unbalanced datasets, they have not proven to be successful in recognizing some heartbeat categories with high performance. This study uses a convolutional neural network (CNN) model to combine the benefits of dense and residual blocks. The objective is to leverage the benefits of residual and dense connections to enhance information flow, gradient propagation, and feature reuse, ultimately improving the model's performance. This proposed model consists of a series of residual-dense blocks interleaved with optional pooling layers for downsampling. A linear support vector machine (LSVM) classified heartbeats into five classes. This makes it easier to learn and represent features from ECG signals. We first denoised the gathered ECG data to correct issues such as baseline drift, power line interference, and motion noise. The impacts of the class imbalance are then offset by resampling techniques that denoise ECG signals. An RD-CNN algorithm is then used to categorize the ECG data for the various cardiac illnesses using the retrieved characteristics. On two benchmarked datasets, we conducted extensive simulations and assessed several performance measures. On average, we have achieved an accuracy of 98.5%, a sensitivity of 97.6%, a specificity of 96.8%, and an area under the receiver operating curve (AUC) of 0.99. The effectiveness of our suggested method for detecting heart disease from ECG data was compared with several recently presented algorithms. The results demonstrate that our method is lightweight and practical, qualifying it for continuous monitoring applications in clinical settings for automated ECG interpretation to support cardiologists.

Graphene and graphene nanohybrid composites-based electrodes for physiological sensing applications.

In this paper, three categories of ECG electrodes were fabricated. Graphene/PDMS(Polydimethylsiloxane)(G-I), Graphene/MWCNT-COOH(Carboxylic-acid functionalized Multi-walled Carbon Nanotubes)/PDMS(G-II),and Graphene/SWCNT-COOH(Carboxylic-acid functionalized Single-walled Carbon Nanotubes)/PDMS(G-III). Each group had thirteen electrodes with varying concentrations ranging from 0.1-5wt%. Since CNTs get tangled easily, it becomes necessary to disperse them properly. To achieve optimal dispersion, CNTs were first sonicated with Isopropyl Alcohol (IPA), and then with PDMS. Mold casting was the technique used for fabricating the electrodes. The results were compared with the conventional ECG electrodes. Best results were achieved from G-III at 3wt% as the value of capacitance is high (0.172nF) as compared to G-I and G-III values at 3wt% which are 0.036nF (0.036nF) and 0.015nF respectively. As capacitance has an inverse relationship with the resistance and impedance, thus at 3wt% the resistance (0.361MΩ) and impedance (0.36MΩ) values are low, which satisfies the relationship. The values of resistance and impedance of G-II are low when compared with the values of G-I and G-II. Great results and ECG waveform are achieved with 3wt% for G-II, which also uses less nanomaterials to produce such great ECG results. It was observed that even after using the electrodes for 5 days, the ECG signal did not degrade over time and no skin allergies were detected for any of the three groups. The ECG tracking system was developed on the concept of the Internet-of-Things (IoT) using various electronic hardware components and software solutions. The results from the fabricated electrodes were promising and were suitable for long-term, and continuous ECG monitoring.