Influence of Oil and Gas End-Use on Summertime Particulate Matter and Ozone Pollution in the Eastern US.

The influence of oil and gas end-use activities on ambient air quality is complex and understudied, particularly in regions where intensive end-use activities and large biogenic emissions of isoprene coincide. In these regions, vehicular emissions of nitrogen oxides (NOx≡NO + NO2) modulate the oxidative fate of isoprene, a biogenic precursor of the harmful air pollutants ozone, formaldehyde, and particulate matter (PM2.5). Here, we investigate the direct and indirect influence of the end-use emissions on ambient air quality. To do so, we use the GEOS-Chem model with focus on the eastern United States (US) in summer. Regional mean end-use NOx of 1.4 ppb suppresses isoprene secondary organic aerosol (OA) formation by just 0.02 µg m-3 and enhances abundance of the carcinogen formaldehyde by 0.3 ppb. Formation of other reactive oxygenated volatile organic compounds is also enhanced, contributing to end-use maximum daily mean 8-h ozone (MDA8 O3) of 8 ppb. End-use PM2.5 is mostly (67%) anthropogenic OA, followed by 20% secondary inorganic sulfate, nitrate and ammonium and 11% black carbon. These adverse effects on eastern US summertime air quality suggest potential for severe air quality degradation in regions like the tropics with year-round biogenic emissions, growing oil and gas end-use and limited environmental regulation.

Mechanism of antibacterial property of micro scale rough surface formed by fine-particle bombarding.

Fine-particle bombardment (FPB) is typically used to modify metal surfaces by bombarding them with fine particles at high speed. FPB is not a coating technique but is used for forming microscale concavities and convexities on a surface. Previously, we reported that an FPB-treated surface showed antibacterial effects; however, the underlying mechanisms remain unclear. We hypothesized that the pitch size of concavity and convexity, and irregular microscale pattern of FPB-treated surfaces might contribute to the antibacterial performance. In this study, we applied FPB to stainless-steel surfaces and evaluated the antibacterial effects of the FPB-treated surfaces based on ISO 22,196:2007. The FPB-treated surfaces exhibited antibacterial activity against Escherichia coli, with an antibacterial activity value (R) of two or more. Furthermore, our experiments suggest that the antibacterial mechanism of the FPB-treated surface can be attributed to increased oxidative stress in bacteria owing to physical stress from the rough surface. The antibacterial effect of FPB-treated surfaces offers an effective measure against drug-resistant bacteria.

The antibacterial activity of FPB-treated surfaces can be attributed to increased oxidative stress induced by physical stress from the FPB-generated rough surface.

[Effects of PM2.5 and O3 sub-chronic combined exposure on ATP amount and ATPase activities in rat nasal mucosa].

OBJECTIVE: To evaluate the effects of fine particle matter (PM2.5) and ozone (O3) combined exposure on adenosine triphosphate (ATP) amount and ATPase activities in nasal mucosa of Sprague Dawley (SD) rats. METHODS: Twenty male SD rats were divided into control group (n=10) and exposure group (n=10) by random number table method. The rats were fed in the conventional clean environment and the air pollutant exposure system established by our team, respectively, and exposed for 208 d. During the exposure period, the concentrations of PM2.5 and O3 in the exposure system were monitored, and a comprehensive assessment of PM2.5 and O3 in the exposure system was conducted by combining self-measurement and site data. On the 208 d of exposure, the core, liver, spleen, kidney, testis and other major organs and nasal mucosal tissues of the rats were harvested. Each organ was weighed and the organ coefficient calculated. The total amount of ATP was measured by bioluminescence, and the activities of Na+-K+ -ATPase and Ca2+ -ATPase were detected by spectrophotometry. The t test of two independent samples was used to compare the differences among the indicator groups. RESULTS: From the 3rd week to the end of exposure duration, the body weight of the rats in the exposure group was higher than that in the control group (P < 0.05), and there was no significant difference in organ coefficients between the two groups. The average daily PM2.5 concentration in the exposure group was (30.68±19.23) µg/m3, and the maximum 8 h ozone concentration (O3-8 h) was (82.45±35.81) µg/m3. The chemiluminescence value (792.4±274.1) IU/L of ATP in nasal mucosa of the rats in the exposure group was lower than that in the control group (1 126.8±218.1) IU/L. The Na+-K+-ATPase activity (1.53±0.85) U/mg in nasal mucosa of the rats in the exposure group was lower than that in the control group (4.31±1.60) U/mg (P < 0.05). The protein content of nasal mucosa in the control group and the exposure group were (302.14±52.51) mg/L and (234.58±53.49) mg/L, respectively, and the activity of Ca2+-ATPase was (0.81±0.27) U/mg and (0.99±0.73) U/mg, respectively. There was no significant difference between the groups. CONCLUSION: The ability of power capacity decreased in the rat nasal mucossa under the sub-chronic low-concentration exposure of PM2.5 and O3.

Generating High Spatial Resolution Exposure Estimates from Sparse Regulatory Monitoring Data.

Random Forest algorithms have extensively been used to estimate ambient air pollutant concentrations. However, the accuracy of model-predicted estimates can suffer from extrapolation problems associated with limited measurement data to train the machine learning algorithms. In this study, we developed and evaluated two approaches, incorporating low-cost sensor data, that enhanced the extrapolating ability of random-forest models in areas with sparse monitoring data. Rochester, NY is the area of a pregnancy-cohort study. Daily PM2.5 concentrations from the NAMS/SLAMS sites were obtained and used as the response variable in the model, with satellite data, meteorological, and land-use variables included as predictors. To improve the base random-forest models, we used PM2.5 measurements from a pre-existing low-cost sensors network, and then conducted a two-step backward selection to gradually eliminate variables with potential emission heterogeneity from the base models. We then introduced the regression-enhanced random forest method into the model development. Finally, contemporaneous urinary 1-hydroxypyrene was used to evaluate the PM2.5 predictions generated from the two approaches. The two-step approach increased the average external validation R2 from 0.49 to 0.65, and decreased the RMSE from 3.56 µg/m3 to 2.96 µg/m3. For the regression-enhanced random forest models, the average R2 of the external validation was 0.54, and the RMSE was 3.40 µg/m3. We also observed significant and comparable relationships between urinary 1-hydroxypyrene levels and PM2.5 predictions from both improved models. This PM2.5 model estimation strategy could improve the extrapolating ability of random forest models in areas with sparse monitoring data.

Risk of death from liver cancer in relation to long-term exposure to fine particulate air pollution in Taiwan.

According to the International Agency for Research on Cancer (IARC), airborne fine particulate matter (PM2.5), which is categorized as a Group I carcinogen, was found to lead to predominantly lung as well as other cancer types in humans. Hepatocellular carcinoma (HCC) is endemic in Taiwan where it is the second and fourth foremost cause of cancer deaths in men and women, respectively. Taiwan's mortality rates for liver cancer vary considerably from one region to another, suggesting that the environment may exert some influence on deaths attributed to liver cancer. The aim of this investigation was to perform an ecologic study to examine the possible link between ambient PM2.5 levels and risk of liver cancer in 66 in Taiwan municipalities. To undertake this investigation, annual PM2.5 levels and age-standardized liver cancer mortality rates were calculated for male and female residents of these areas from 2010 to 2019. Data were tested using weighted-multiple regression analyses to compute adjusted risk ratio (RR) controlling for urbanization level and physician density. Annual PM2.5 levels of each municipality were divided into tertiles. The adjusted RRs for males residing in those areas with intermediate tertile levels (21.85 to 28.21 ug/m3) and the highest tertiles levels (28.22-31.23 ug/m3) of PM2.5 were 1.29 (95% CI = 1.25-1.46) and 1.41 (95% CI = 1.36-1.46), respectively. Women in these locations shared a similar risk, 1.32 (1.25-1.4) and 1.41 (1.34-1.49), respectively. Evidence indicated that PM2.5 increased risk of mortality rates attributed to liver cancer in both men and women in Taiwan.

Spray freeze dried niclosamide nanocrystals embedded dry powder for high dose pulmonary delivery.

Based on the drug repositioning strategy, niclosamide (NCL) has shown potential applications for treating COVID-19. However, the development of new formulations for effective NCL delivery is still challenging. Herein, NCL-embedded dry powder for inhalation (NeDPI) was fabricated by a novel spray freeze drying technology. The addition of Tween-80 together with 1,2-Distearoyl-sn-glycero-3-phosphocholine showed the synergistic effects on improving both the dispersibility of primary NCL nanocrystals suspended in the feed liquid and the spherical structure integrity of the spray freeze dried (SFD) microparticle. The SFD microparticle size, morphology, crystal properties, flowability and aerosol performance were systematically investigated by regulating the feed liquid composition and freezing temperature. The addition of leucine as the aerosol enhancer promoted the microparticle sphericity with greatly improved flowability. The optimal sample (SF- 80D-N20L2D2T1) showed the highest fine particle fraction of ∼47.83%, equivalently over 3.8 mg NCL that could reach the deep lung when inhaling 10 mg dry powders.

Association of genetic polymorphisms with mercapturic acids in the urine of young healthy subjects before and after exposure to outdoor air pollution.

We aimed to identify the relationship between variations in metabolic genes and human urinary changes in mercapturic acids (MAs), including CEMA, HMPMA, SPMA, HPMA and HEMA, before and after air pollution exposure. Genotype detection for 47 relevant single nucleotide polymorphisms (SNPs) collected by literature research was performed. Five MAs expression levels in the urinary samples of 50 young healthy individuals with short-term exposure to clean, polluted and purified air at five time points were detected by targeted online solid-phase extraction liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS), followed with associations of SNPs with MAs changes. Difference in MAs between polluted and clean/purified air was significantly associated with 21 SNPs mapped into 9 genes. Five SNPs in GSTP1 showed the most prominent association with the changes in SPMA expression, indicating that those SNPs in GSTP1 and SPMA might serve as biomarkers for susceptibility and the prognosis of lung cancer.

Surface Modification of lactose carrier particles using a fluid bed coater to improve fine particle fraction for dry powder inhalers.

Surface roughness of carrier particles can impact dry powder inhaler (DPI) performance. There are opposing views on the effect of roughness on DPI performance. Hence, a systematic approach is needed to modify carrier surfaces and evaluate the impact on drug delivery. Carrier particle surfaces were modified by fluid bed coating with saturated lactose containing micronized lactose of different sizes (2, 5 and 8 µm) and coated to different levels (20, 40, 60 and 80%). Their drug delivery performance was assessed by the fine particle fraction (FPF). Roughness parameters, mean arithmetic roughness (Ra) and arithmetic mean height (Sa), of the carrier particles, were also evaluated using optical profilometry and scanning laser microscopy. Generally, particles of higher Ra had higher FPF. Higher Sa resulted in higher FPF only for particles with 60 and 80% coat levels. Reduced contact surface area between the drug particle and rougher carrier particle resulted in easier drug detachment during aerosolization. The 5 µm micronized lactose produced optimal carrier particles with respect to FPF and surface roughness. The study highlighted that with the ideal particles for surface roughening and coating level, surface roughening could be efficiently achieved by fluid bed coating for superior DPI performance.

On thresholds for controlling negative particle (PM2.5) readings in air quality reporting.

Ambient PM2.5 (particles less than 2.5 µm in diameter) is monitored in many countries including Australia. Occasionally PM2.5 instruments may report negative measurements, although in realty the ambient air can never contain negative amounts of particles. Some negative readings are caused by instrument faults or procedural errors, thus can be simply invalidated from air quality reporting. There are occasions, however, when negative readings occur due to other factors including technological or procedural limitations. Treatment of such negative data requires consideration of factors such as measurement uncertainty, instrument noise and risk for significant bias in air quality reporting. There is very limited documentation on handling negative PM2.5 data in the literature. This paper demonstrates how a threshold is determined for controlling negative hourly PM2.5 readings in the New South Wales (NSW) air quality data system. The investigation involved a review of thresholds used in different data systems and an assessment of instrument measurement uncertainties, zero air test data and impacts on key reporting statistics when applying different thresholds to historical datasets. The results show that a threshold of -10.0 µg/m3 appears optimal for controlling negative PM2.5 data in public reporting. This choice is consistent with the measurement uncertainty estimates and the zero air test data statistics calculated for the NSW Air Quality Monitoring Network, and is expected not to have significant impacts on key compliance reporting statistics such as data availability and annual average pollution levels. The analysis can be useful for air quality monitoring in other Australian jurisdictions or wider context.

Stream Hydrology Controls the Longitudinal Bioreactive Footprint of Urban-Sourced Fine Particles.

The relevance of wastewater treatment plant (WWTP) effluents in fluvial networks is increasing as urbanization grows in catchments. Urban-sourced fine particles from WWTP effluents deposit and accumulate in the streambed sediment of receiving streams over time and can fuel respiration rates, which can thus potentially increase rates of biogeochemical reactions and CO2 emissions to the atmosphere. We aimed to provide a quantitative assessment of the influence of WWTP-sourced fine particles deposited in the streambed sediment on stream metabolic activity for 1 year in an intermittent Mediterranean stream. More nutrient-rich and metabolically active fine particle standing stocks were observed downstream of the WWTP, propagating to the end of the 820 m study reach, especially during the dry period (i.e., when the dilution capacity of the stream to WWTP inputs is <40%). Based on the longitudinal patterns of fine particle standing stocks and their metabolic activity, we estimated that the in-stream bioreactive capacity associated with these fine particles could potentially lead to substantial carbon dioxide emissions to the atmosphere (3.1 g C/m2/d). We show the importance of incorporating fine particle standing stocks downstream of point source inputs, particularly WWTPs in intermittent streams, into carbon budgets.

Evolution of aerosol chemistry in Beijing under strong influence of anthropogenic pollutants: Composition, sources, and secondary formation of fine particulate nitrated aromatic compounds.

Nitrated aromatic compounds (NACs) constitute a key segment of brown carbon (BrC), thereby contributing to the light-absorbing characteristics of aerosols in the atmosphere. However, until recently, there is a scarcity of research on their generation in the urban environment. The current study is based upon an extensive field study of NACs from fine particle samples obtained at an urban location in Beijing in the spring and summer of 2017, which was characterized by both high anthropogenic volatile organic compounds (VOCs) and high-NOx dominated conditions. The mean total concentration of the nine NACs was 8.58 ng m-3 in spring and 8.54 ng m-3 in summer. In the spring, the most abundant NACs were 4-nitrophenol (33.7%) and 4-nitrocatechol (19.3%), while in the summer, the most abundant NACs were 4-nitroguaiacol (34.9%) and 2, 4-dinitrophenol (23%). Atmospheric NACs were primarily produced from coal combustion (52%) and biomass burning (32%) in spring, and originated from the secondary formation (37%) and traffic (35%) in summer. NO2 could promote the formation of NACs with a significant effect on their compositions, especially for nitrophenols and nitrocatechols. It can also affect the formation of nitrated aerosols and their existing form. Inorganic nitrates were increased to conversion in the daytime when NO2 concentrations were higher than 30 ppb, but the corresponding oxidation products shifted to primarily organic ones at night. The transition was VOC-sensitive regimes for NAC formation, and nitration of toluene was a more important pathway during the campaign in Beijing.

A CFD-DEM investigation of powder transport and aerosolization in ELLIPTA® dry powder inhaler.

We have performed Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) simulations of air and particles in a commercial ELLIPTA® inhaler. We simulated the fluidization, deagglomeration and transport of carrier and API particles, with two realistic inhalation profiles that are representative of moderate asthma and very severe COPD patients, and three different mouthpiece designs. In each of the ten cases simulated, we determined the fine particle fraction (FPF) in the stream leaving the mouthpiece, the temporal evolution of the spatial distribution of the particles, the mean air (slip) velocity seen by the carrier particles, and the average numbers and normal impact velocities of carrier-carrier and carrier-wall collisions inside the inhaler. In the cases examined, the air-carrier and carrier-carrier interactions affected the FPF, while the carrier-wall interactions were too infrequent to have a substantial effect. The simulations revealed the benefit of loading both blisters even when only a single medication needs to be delivered.

Clarifying winter clean heating importance: Insight chemical compositions and cytotoxicity exposure to primary and aged pollution emissions in China rural areas.

Residential solid fuel combustion (RSFC) is an important source of PM2.5. Here we investigate the cytotoxicity of primarily emitted and photochemically aged PM2.5 to A549 cells. Owing to the formation of water-soluble ions and organics (e.g., oPAHs and nPAHs), emission factors of PM2.5 were increased by 44.4% on average after 7-day equivalent photochemical aging, which greatly altered chemical profiles of freshly emitted PM2.5. Consequently, the cytotoxicity varied with aging duration that 2-day and 7-day aged PM2.5 induced 22.5% and 35.1%, respectively, higher levels of reactive oxygen species than primary emissions. Similar increases were also observed for multi-cytotoxicity. Correlation analysis and western blot results collectively confirmed HO-1/Nrf-2 signaling pathway dominated the cytotoxicity of aged PM2.5 from RSFC, which was regulated by the enhanced o-PAHs and n-PAHs during photochemical aging. Thus, aged and secondary aerosol exposure needs to be paid more attention due to the enhanced cytotoxicity and the vast crowd involved.

A designed moderately thermophilic consortia with a better performance for leaching high grade fine lead-zinc sulfide ore.

Unwieldy fine sulfide ores are produced during mining; without being appropriately disposed of, they can cause environmental pollution and waste resources. This study investigated the leaching performance of a moderately thermophilic consortia (Leptospirillum ferriphilum + Acidithiobacillus caldus + Sulfobacillus benefaciens) for fine lead-zinc sulfide raw ore. The results showed this microbial community created a low pH, high ORP, and high cell concentration environment for mineral leaching, improving bioleaching efficiency. Under the action of this consortia, the zinc leaching rate reached 96.44 in 8 days, and reached 100% after 12 days. EPS analysis indicated that the consortia could mediate the secretion of more polysaccharides to ensure leaching efficiency. EPS levels and amino acids were the main factors affecting bioleaching. An analysis of mineral surface characteristics showed the consortia effectively leached pyrite and sphalerite from the fine sulfide ore, and prevented the mineral surface forming the jarosite that could hinder bioleaching. This study found that bioleaching reduced the potential environmental toxicity of the minerals, providing an important reference for guiding the bioleaching of unwieldy fine sulfide raw ore.

Micro-fluidic Spray Freeze Dried Ciprofloxacin Hydrochloride-Embedded Dry Powder for Inhalation.

Active pharmaceutical ingredient (API)-embedded dry powder for inhalation (AeDPI) is highly desirable for pulmonary delivery of high-dose drug. Herein, a series of spray freeze-dried (SFD) ciprofloxacin hydrochloride (CH)-embedded dry powders were fabricated via a self-designed micro-fluidic spray freeze tower (MFSFT) capable of tuning freezing temperature of cooling air as the refrigerant medium. The effects of total solid content (TSC), mass ratio of CH to L-leucine (Leu) as the aerosol dispersion enhancer, and the freezing temperature on particle morphology, size, density, moisture content, crystal properties, flowability, and aerodynamic performance were investigated. It was found that the Leu content and freezing temperature had considerable influence on the fine particle fraction (FPF) of the SFD microparticles. The optimal formulation (CH/Leu = 7:3, TSC = 2%w/w) prepared at - 40°C exhibited remarkable effective drug deposition (~ 33.38%), good aerodynamic performance (~ 47.69% FPF), and excellent storage stability with ultralow hygroscopicity (~ 1.93%). This work demonstrated the promising feasibility of using the MFSFT instead of conventional liquid nitrogen assisted method in the research and development of high-dose AeDPI.

Constructing a Raman and surface-enhanced Raman scattering spectral reference library for fine-particle analysis.

Fine particles associated with haze pollution threaten the health of over 400 million people in China. Owing to excellent non-destructive fingerprint recognition characteristics, Raman and surface-enhanced Raman scattering (SERS) are often used to analyze the composition of fine particles to determine their physical and chemical properties as well as reaction mechanisms. However, there is no comprehensive Raman spectral library of fine particles. Furthermore, various studies that used SERS for fine-particle composition analysis showed that the uniqueness of the SERS substrates and different excitation wavelengths can produce a different spectrum for the same fine-particle component. To overcome this limitation, we conducted SERS experiments with a portable Raman spectrometer using two common SERS substrates (silver (Ag) foil and gold nanoparticles (Au NPs)) and a 785 nm laser. Herein, we introduced three main particle component types (sulfate-nitrate-ammonium (SNA), organic material, and soot) with a total of 39 chemical substances. We scanned the solid Raman, liquid Raman, and SERS spectra of these substances and constructed a fine-particle reference library containing 105 spectra. Spectral results indicated that for soot and SNA, the differences in characteristic peaks mainly originated from the solid-liquid phase transition; Ag foil had little effect on this difference, while the Au NPs caused a significant red shift in the peak positions of polycyclic aromatic hydrocarbons. Moreover, with various characteristic peak positions in the three types of spectra, we could quickly and correctly distinguish substances. We hope that this spectral library will aid in the future identification of fine particles.

Hyperoside relieves particulate matter-induced lung injury by inhibiting AMPK/mTOR-mediated autophagy deregulation.

Autophagy-mediated cell death plays a critical role in the pathogenesis of PMs-induced lung injury. Hyperoside (Hyp), a flavonoid glycosides, is known to exert protective effects on many diseases by inhibiting autophagic activity. The current study aimed to explore the protective effect and mechanism of Hyp against PMs-induced lung injury in PM2.5 challenged Beas-2b cells in vitro and BALB/C mice in vivo. In vitro, we found that the organic solvent-extractable fraction of SRM1649b (O-PMs) caused more severe cytotoxicity in Beas-2b cells than the water solvent-extractable fraction of SRM1649b (W-PMs). O-PMs treatment dose-dependently upregulated the expression of autophagy markers (beclin-1, p62, atg3 and LC3II) and apoptotic proteins. This cytotoxicity of O-PMs was attenuated by Hyp pretreatment in parallel with downregulation of the expression of autophagy markers, apoptotic proteins, and p-AMPK and upregulation of p-mTOR expression. Notably, the therapeutic effect of Hyp was attenuated by pretreated with AICAR (an AMPK inducer), but enhanced by CC and 3-MA treatment. In vivo, Hyp reduced pathological lung injury and decreased the levels of PMs-induced inflammatory cytokines (TNF-α and IL-6), and the number of total cells in the BALF by inhibiting AMPK/mTOR signaling. Furthermore, cotreatment with AICAR (500 mg/kg) reduced but did not abrogate the pulmonary protective effect of Hyp. These findings indicate that Hyp protects against PMs-induced lung injury by suppressing autophagy deregulation and apoptosis through regulation of the AMPK/mTOR pathway.

Higher Fine Particle Fraction in Sediment Increased Phosphorus Flux to Estuary in Restored Yellow River Basin.

River delta-front estuaries (DEs) are vital interfaces for fluxes between terrestrial and marine environments. However, deep uncertainty exists in estimating the sedimentary pollutant flux from terrestrial environments in DEs due, in part, to a lack of direct measurements in these dynamic and complicated regions and uncertainty in the calculation method. Due to its high sediment content, the Yellow River (YR) has a strong ability to adsorb phosphorus; therefore, it reliably reflects estuarine sedimentary processes. Here, through the comprehensive analysis of field samples, monitoring data and remote sensing images, we conclude that riverine fine particles control the deltaic estuary pollution status and that particle size is the key factor. Based on the stable relationships between phosphorus and heavy metals, with r2 values of 0.990, 0.992, and 0.639 for As, Cd, and Cr, respectively, we estimated that the P flux reached 22.68 g/m2 yr in 2017. Analysis of the YR high-silt sediment load, which has a strong phosphorus adsorption ability and constitutes a substantial fraction of global fluvial sediment transport, revealed a negative correlation between the riverine sediment load and the estuarine phosphorus flux.

Change in risk of hospital admissions for ischemic heart disease after the implementation of a mass rapid transit system in Taipei.

Numerous epidemiologic studies demonstrated an association between an increase in levels of fine particles (particulate matter less than 2.5 um in diameter, PM2.5) and elevation in the number of hospital admissions for cardiovascular diseases. Air pollution levels including PM2.5 clearly decreased in Taipei City after the mass rapid transit (MRT) system began operations in 1996. The aim of this study was to investigate the extent of changes in the risk of daily hospital admissions for ischemic heart disease (IHD) over a 17-year period after the installation of a MRT system in Taipei. The full study was divided into Period 1 (1997-2000), total track length 65.1 km; Period 2 (2001-2008), total track length 75.8 km; and Period 3 (2009-2013), total track length 121.3 km. A time-stratified case-crossover analysis was conducted to estimate relative risk (RR) of hospital admissions for IHD for each 10 ug/m3 increase in PM2.5 for different periods. On cool days, the associated RR of IHD for Period 3 was consistently lower compared to period 2 in both our single- and two-pollutant models. However, the daily risk for IHD admissions was found to be significantly higher for period 3 compared to period 2 in our single-pollutant model and in our two-pollutant models (PM2.5+ SO2) on warm days. The basis for this difference is unknown. Data suggests that an MRT system may provide substantial health benefits, a finding that may be helpful to urban communities, urban planners, and public health specialists.

Effect of long-term exposure to PM2.5 on years of life lost in a populated Middle Eastern city.

From a public health point of view, years of life lost (YLL) is a more important index than the number of deaths to evaluate the effect of risk factors. The objective of the present study was to estimate the burden of disease including years of life lost (YLL) and expected life remaining (ELR) attributed to long-term exposure to PM2.5 in Ahvaz, one of the most polluted cities of the world, during March 2014 through March 2017. AirQ + software was used for the estimation of YLL and ELR due to all natural causes of death. Hourly concentrations of PM2.5 were acquired from the Department of Environment (DoE) of Ahvaz. Several steps were performed to validate the raw air quality data. Only the monitors were included that had minimum data completeness of 75%. Two age groups were selected for this study, including 0-64 and 65 < years. The life table approach was used to estimate YLL and ELR. Annual averages of PM2.5 were 5.2-8 times higher than the air quality guideline (10 µg/m3) set by WHO for long-term exposure to PM2.5. In total, PM2.5 has caused 234,041 years of life lost due to mortality. About 84% of YLLs were attributed to people older than 65 years old. The YLLs of men were higher than those for women. The YLLs in the third year were greater than the first two years. PM2.5 has caused the average age of total population, people aged 0-64 years old, and people > 65 years old decreased by 2.5, 3, and 1.6 years, respectively. These studies indicated that people in a city that the air quality is highly affected by dust storms, industrial emissions, and urban air pollution are significantly at risk. Air pollution control strategies and actions should be designed and executed to improve the quality of ambient air.