Fluorine labelling for in situ 19F NMR in oriented systems.

The focus of this project is to take advantage of the large NMR chemical shift anisotropy of 19F to determine the orientation of fluorine labeled biomolecules in situ in oriented biological systems such as muscle. The difficulty with a single fluorine atom is that the orientation determined from a chemical shift is not singlevalued in the case of a fully anisotropic chemical shift tensor. The utility of a labeling approach with two fluorine labels in a fixed molecular framework where one of the labels has an axially symmetric chemical shift anisotropy such as a CF3 group and the other has a fully asymmetric chemical shift anisotropy such as 5-fluorotryptophan is evaluated. The result is that the orientation of the label can be determined straightforwardly from a single one-dimensional 19F NMR spectrum. The potential applications are widespread and not limited to biological applications.

Decorating phenylalanine side-chains with triple labeled 13C/19F/2H isotope patterns.

We present an economic and straightforward method to introduce 13C-19F spin systems into the deuterated aromatic side chains of phenylalanine as reporters for various protein NMR applications. The method is based on the synthesis of [4-13C, 2,3,5,6-2H4] 4-fluorophenylalanine from the commercially available isotope sources [2-13C] acetone and deuterium oxide. This compound is readily metabolized by standard Escherichia coli overexpression in a glyphosate-containing minimal medium, which results in high incorporation rates in the corresponding target proteins.

Quantitative analysis of the slow exchange process by 19F NMR in the presence of scalar and dipolar couplings: applications to the ribose 2'-19F probe in nucleic acids.

Solution NMR spectroscopy is a particularly powerful technique for characterizing the functional dynamics of biomolecules, which is typically achieved through the quantitative characterization of chemical exchange processes via the measurement of spin relaxation rates. In addition to the conventional nuclei such as 15N and 13C, which are abundant in biomolecules, fluorine-19 (19F) has recently garnered attention and is being widely used as a site-specific spin probe. While 19F offers the advantages of high sensitivity and low background, it can be susceptible to artifacts in quantitative relaxation analyses due to a multitude of dipolar and scalar coupling interactions with nearby 1H spins. In this study, we focused on the ribose 2'-19F spin probe in nucleic acids and investigated the effects of 1H-19F spin interactions on the quantitative characterization of slow exchange processes on the millisecond time scale. We demonstrated that the 1H-19F dipolar coupling can significantly affect the interpretation of 19F chemical exchange saturation transfer (CEST) experiments when 1H decoupling is applied, while the 1H-19F interactions have a lesser impact on Carr-Purcell-Meiboom-Gill relaxation dispersion applications. We also proposed a modified CEST scheme to alleviate these artifacts along with experimental verifications on self-complementary RNA systems. The theoretical framework presented in this study can be widely applied to various 19F spin systems where 1H-19F interactions are operative, further expanding the utility of 19F relaxation-based NMR experiments.

Fluoride-Free Synthesis of 2D Titanium Carbide (MXenes) Assisted by scCO2 -Based Ternary Solution.

2D MXene-Ti3 C2 Tx holds great promise in various electronic applications, especially for electromagnetic interference (EMI) shielding devices and supercapacitors. Ti3 C2 Tx synthesis typically involves the use of hazardous fluorine-containing chemicals that can result in the formation of inert fluoride functional groups on the surface of Ti3 C2 Tx , severely degrading its properties and posing a threat to the performance of electron transfer among electrical devices. Herein, a supercritical carbon dioxide-based ternary solution (scCO2 /DMSO/HCl) to produce fluoride-free Ti3 C2 Tx in mild conditions (via 0.5 m HCl, 20 MPa, 32 °C) is reported. The fluorine-free Ti3 C2 Tx films electrode presents an excellent gravimetric capacitance of 320 F g-1 at 2 mV s-1 in 1 m H2 SO4 . Besides, it is demonstrated that fluorine-free Ti3 C2 Tx films exhibit outstanding EMI shielding efficiency of 53.12 dB at 2.5 µm thickness. The findings offer a mild and practical approach to producing fluoride-free Ti3 C2 Tx and open opportunities for exploring MXenes' potential applications in various fields.

Fluorine-Free MXenes: Recent Advances, Synthesis Strategies, and Mechanisms.

MXenes, an exceptional class of 2D materials, possess high conductivity, adaptable surface chemistry, mechanical strength, and tunable bandgaps, making them attractive for diverse applications. Unlocking the potential of MXenes requires precise control over synthesis methods and surface functionality. Conventionally, fluorine-based etchants are used in MXenes synthesis, posing both environmental concerns and alterations to surface properties, along with the introduction of certain defects. This prompts the exploration of innovative fluorine-free strategies for MXenes synthesis. This review focuses on environmentally friendly, fluorine-free techniques for MXene synthesis, emphasizing mechanisms and recent breakthroughs in alternative etching strategies. The comprehensive coverage includes electrochemical etching, Lewis acid-driven molten salt etching, alkaline/hydrothermal techniques, chemical vapor deposition (CVD), and recent innovative methods. Fluorine-free MXenes synthesis yields terminations such as ─O, ─OH, ─Cl, etc., influencing surface chemistry and improving their properties. The presence of ─OH groups in NaOH etched MXenes boosts their energy storage, while ─Cl functionality from Lewis acidic salts optimizes electrochemical performance. Fluorine-free methods mitigate adverse effects of ─F terminations on MXene conductivity, improving electronic properties and broadening their applications. In addition to traditional approaches, this review delves into novel fluorine-free methods for tailoring MXenes properties. It comprehensively addresses challenges, opportunities, and future perspectives in fluorine-free MXenes.

Fluorine-Containing Poly(Fluorene)-Based Anion Exchange Membrane with High Hydroxide Conductivity and Physicochemical Stability for Water Electrolysis.

Improving the hydroxide conductivity and dimensional stability of anion exchange membranes (AEMs) while retaining their high alkaline stability is necessary to realize the commercialization of AEM water electrolysis (AEMWE). A strategy for improving the hydroxide conductivity and dimensional stability of AEMs by inserting fluorine atoms in the core structure of the backbone is reported, which not only reduces the glass transition temperature of the polymer due to steric strain, but also induces distinct phase separation by inducing polarity discrimination to facilitate the formation of ion transport channels. The resulting PFPFTP-QA AEM with fluorine into the core structure shows high hydroxide conductivity (>159 mS cm-1 at 80 °C), favorable dimensional stability (>25% at 80 °C), and excellent alkaline stability for 1000 h in 2 m KOH solution at 80 °C. Moreover, the PFPFTP-QA is used to construct an AEMWE cell with a platinum group metal (PGM)-free NiFe anode, which exhibits the current density of 6.86 A cm-2 at 1.9 V at 80 °C, the highest performance in Pt/C cathode and PGM-free anode reports so far and operates stably for over 100 h at a constant current of 0.5 A cm-2.

Robust Amide-Linked Fluorinated Covalent Organic Framework for Long-Term Oxygen Reduction Reaction Electrocatalysis.

The high energy demand of the evolving world opens the door to develop more sustainable and environmentally friendly energy sources. Oxygen reduction reaction (ORR) is a promising candidate, being the 2e- pathway of great interest for the green production of hydrogen peroxide. Metal-free covalent organic frameworks (COFs) electrocatalysts present a suitable alternative to substitute the noble-metals more commonly employed in this application. However, the lability of the linkages building up the framework raises an issue for their long-term use and application in aggressive media. Herein, a stable amide-linked COF is reported through post-synthetic modification of a previously reported imine-linked COF proven to be effective as an electrocatalyst, enhancing its chemical stability and electrochemical response. It is found that after the linkage transformation, the new electrocatalyst displays a higher selectivity toward the H2O2 production (98.5%) and an enhanced turnover frequency of 0.155 s-1, which is among the bests reported to date for metal-free and COF based electrocatalysts. The results represent a promising step forward for metal-free non pyrolyzed electrocatalysts, improving their properties through post-synthetic linkage modification for long-term operation.

Improving NiFe Electrocatalysts through Fluorination-Driven Rearrangements for Neutral Water Electrolysis.

Neutral electrolysis to produce hydrogen is prime challenging owing to the sluggish kinetics of water dissociation for the electrochemical reduction of water to molecular hydrogen. An ion-enriched electrode/electrolyte interface for electrocatalytic reactions can efficiently obtain a stable electrolysis system. Herein, we found that interfacial accumulated fluoride ions and the anchored Pt single atoms/nanoparticles in catalysts can improve hydrogen evolution reaction (HER) activity of NiFe-based hydroxide catalysts, prolonging the operating stability at high current density in neutral conditions. NiFe hydroxide electrode obtains an outstanding performance of 1000 mA cm-2 at low overpotential of 218 mV with 1000 h operation at 100 mA cm-2. Electrochemical experiments and theoretical calculations have demonstrated that the interfacial fluoride contributes to promote the adsorption of Pt to proton for sustaining a large current density at low potential, while the Pt single atoms/nanoparticles provide H adsorption sites. The synergy effect of F and Pt species promotes the formation of Pt─H and F─H bonds, which accelerate the adsorption and dissociation process of H2O and promote the HER reaction with a long-term durability in neutral conditions.

Preclinical Evaluation of Azabenzimidazole-Based PET Radioligands for γ-8 Dependent Transmembrane AMPA Receptor Regulatory Protein Imaging.

AMPA glutamate receptors (AMPARs) play a pivotal role in excitatory neurotransmission, particularly in the hippocampus where the TARP γ-8 subunit is enriched and serves as a target for emerging anti-epileptic drugs. To enable in vivo visualization of TARP γ-8 distribution and expression by positron emission tomography (PET), this study focuses on the development of novel 18 F-labeled TARP γ-8 inhibitors and their corresponding precursors, stemming from the azabenzimidazole scaffold. The resulting radioligands [18 F]TARP-2204 and [18 F]TARP-2205 were successfully synthesized with acceptable radiochemical yield, high molar activity, and excellent radiochemical purity. In vitro autoradiography demonstrates high level of specific binding of [18 F]TARP-2205 to TARP γ-8 in both rat and nonhuman primate brain tissues. However, unexpected radiodefluorination in PET imaging studies of rodents emphasizes the need for further structural refinement. This work serves as an excellent starting point for the development of future 18 F-labeled TARP γ-8 PET tracers, offering valuable insights into medicinal chemistry design, radiosynthesis and subsequent PET evaluation.

Fast 19 F spectroscopic imaging with pseudo-spiral k-space sampling.

Fluorine MRI is finding wider acceptance in theranostics applications where imaging of 19 F hotspots of fluorinated contrast material is central. The essence of such applications is to capture ghosting-artifact-free images of the inherently low MR response under clinically viable conditions. To serve this purpose, this work introduces the balanced spiral spectroscopic imaging (BaSSI) sequence, which is implemented on a 3.0 T clinical scanner and is capable of generating 19 F hotspot images in an efficient manner. The sequence utilizes an all-phase-encoded pseudo-spiral k-space trajectory, enabling the acquisition of broadband (80 ppm) fluorine spectra free from chemical shift ghosting. BaSSI can acquire a 64 × 64 image with 1 mm × 1 mm voxels in just 14 s, significantly outperforming typical MRSI sequences used in 1 H or 31 P imaging. The study employed in silico characterization to verify essential design choices such as the excitation pulse, as well as to identify the boundaries of the parameter space explored for optimization. BaSSI's performance was further benchmarked against the 3D ultrashort-echo-time balanced steady-state free precession (3D UTE BSSFP) sequence, a well established method used in 19 F MRI, in vitro. Both sequences underwent extensive optimization through exploration of a wide parameter space on a small phantom containing 10 µL of non-diluted bulk perfluorooctylbromide (PFOB) prior to comparative experiments. Subsequent to optimization, BaSSI and 3D UTE BSSFP were employed to capture images of small non-diluted bulk PFOB samples (0.10 and 0.05 µL), with variations in the number of signal averages, and thus the total scan time, in order to assess the detection sensitivities of the sequences. In these experiments, the detection sensitivity was evaluated using the Rose criterion (Rc ), which provides a quantitative metric for assessing object visibility. The study further demonstrated BaSSI's utility as a (pre)clinical tool through postmortem imaging of polymer microspheres filled with PFOB in a BALB/c mouse. Anatomic localization of 19 F hotspots was achieved by denoising raw data obtained with BaSSI using a filter based on the Rose criterion. These data were then successfully registered to 1 H anatomical images. BaSSI demonstrated superior detection sensitivity in the benchmarking analysis, achieving Rc values approximately twice as high as those obtained with the 3D UTE BSSFP method. The technique successfully facilitated imaging and precise localization of 19 F hotspots in postmortem experiments. However, it is important to highlight that imaging 10 mM PFOB in small mice postmortem, utilizing a 48 × 48 × 48 3D scan, demanded a substantial scan time of 1 h and 45 min. Further studies will explore accelerated imaging techniques, such as compressed sensing, to enhance BaSSI's clinical utility.

Development of radiofluorinated MLN-4760 derivatives for PET imaging of the SARS-CoV-2 entry receptor ACE2.

PURPOSE: The angiotensin converting enzyme 2 (ACE2) plays a regulatory role in the cardiovascular system and serves SARS-CoV-2 as an entry receptor. The aim of this study was to synthesize and evaluate radiofluorinated derivatives of the ACE2 inhibitor MLN-4760. [18F]F-MLN-4760 and [18F]F-Aza-MLN-4760 were demonstrated to be suitable for non-invasive imaging of ACE2, potentially enabling a better understanding of its expression dynamics. METHODS: Computational molecular modeling, based on the structures of human ACE2 (hACE2) and mouse ACE2 (mACE2), revealed that the ACE2-binding modes of F-MLN-4760 and F-Aza-MLN-4760 were similar to that of MLN-4760. Co-crystallization of the hACE2/F-MLN-4760 protein complex was performed for confirmation. Displacement experiments using [3H]MLN-4760 enabled the determination of the binding affinities of the synthesized F-MLN-4760 and F-Aza-MLN-4760 to hACE2 expressed in HEK-ACE2 cells. Aryl trimethylstannane-based and pyridine-based radiofluorination precursors were synthesized and used for the preparation of the respective radiotracers. [18F]F-MLN-4760 and [18F]F-Aza-MLN-4760 were evaluated with regard to the uptake in HEK-ACE2 and HEK-ACE cells and in vitro binding to tissue sections of HEK-ACE2 xenografts and normal organs of mice. Biodistribution and PET/CT imaging studies of [18F]F-MLN-4760 and [18F]F-Aza-MLN-4760 were performed using HEK-ACE2 and HEK-ACE xenografted nude mice. RESULTS: Crystallography data revealed an equal hACE2-binding mode for F-MLN-4760 as previously found for MLN-4760. Moreover, computer-based modeling indicated that similar binding to hACE2 and mACE2 holds true for both, F-MLN-4760 and F-Aza-MLN-4760, as is the case for MLN-4760. The IC50 values were three-fold and seven-fold higher for F-MLN-4760 and F-Aza-MLN-4760, respectively, than for MLN-4760. [18F]F-MLN-4760 and [18F]F-Aza-MLN-4760 were obtained in 1.4 ± 0.3 GBq and 0.5 ± 0.1 GBq activity with > 99% radiochemical purity in a 5.3% and 1.2% radiochemical yield, respectively. Uptake in HEK-ACE2 cells was higher for [18F]F-MLN-4760 (67 ± 9%) than for [18F]F-Aza-MLN-4760 (37 ± 8%) after 3-h incubation while negligible uptake was seen in HEK-ACE cells (< 0.3%). [18F]F-MLN-4760 and [18F]F-Aza-MLN-4760 accumulated specifically in HEK-ACE2 xenografts of mice (13 ± 2% IA/g and 15 ± 2% IA/g at 1 h p.i.) with almost no uptake observed in HEK-ACE xenografts (< 0.3% IA/g). This was confirmed by PET/CT imaging, which also visualized unspecific accumulation in the gall bladder and intestinal tract. CONCLUSION: Both radiotracers showed specific and selective binding to ACE2 in vitro and in vivo. [18F]F-MLN-4760 was, however, obtained in higher yields and the ACE2-binding affinity was superior over that of [18F]F-Aza-MLN-4760. [18F]F-MLN-4760 would, thus, be the candidate of choice for further development in view of its use for PET imaging of ACE2.

Synthesis and preclinical evaluation of novel 18F-vancomycin-based tracers for the detection of bacterial infections using positron emission tomography.

INTRODUCTION: Bacterial infections are a major problem in medicine, and the rapid and accurate detection of such infections is essential for optimal patient outcome. Bacterial infections can be diagnosed by nuclear imaging, but most currently available modalities are unable to discriminate infection from sterile inflammation. Bacteria-targeted positron emission tomography (PET) tracers have the potential to overcome this hurdle. In the present study, we compared three 18F-labelled PET tracers based on the clinically applied antibiotic vancomycin for targeted imaging of Gram-positive bacteria. METHODS: [18F]FB-NHS and [18F]BODIPY-FL-NHS were conjugated to vancomycin. The resulting conjugates, together with our previously developed [18F]PQ-VE1-vancomycin, were tested for stability, lipophilicity, selective binding to Gram-positive bacteria, antimicrobial activity and biodistribution. For the first time, the pharmacokinetic properties of all three tracers were compared in healthy animals to identify potential binding sites. RESULTS: [18F]FB-vancomycin, [18F]BODIPY-FL-vancomycin, and [18F]PQ-VE1-vancomycin were successfully synthesized with radiochemical yields of 11.7%, 2.6%, and 0.8%, respectively. [18F]FB-vancomycin exhibited poor in vitro and in vivo stability and, accordingly, no bacterial binding. In contrast, [18F]BODIPY-FL-vancomycin and [18F]PQ-VE1-vancomycin showed strong and specific binding to Gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA), which was outcompeted by unlabeled vancomycin only at concentrations exceeding clinically relevant vancomycin blood levels. Biodistribution showed renal clearance of [18F]PQ-VE1-vancomycin and [18F]BODIPY-FL-vancomycin with low non-specific accumulation in muscles, fat and bones. CONCLUSION: Here we present the synthesis and first evaluation of the vancomycin-based PET tracers [18F]BODIPY-FL-vancomycin and [18F]PQ-VE1-vancomycin for image-guided detection of Gram-positive bacteria. Our study paves the way towards real-time bacteria-targeted diagnosis of soft tissue and implant-associated infections that are oftentimes caused by Gram-positive bacteria, even after prophylactic treatment with vancomycin.

Macrophage mannose receptor CD206 targeting of fluoride-18 labeled mannosylated dextran: A validation study in mice.

PURPOSE: Aluminum fluoride-18-labeled 1,4,7-triazacyclononane-1,4,7-triacetic acid-conjugated mannosylated dextran derivative (Al[18F]F-NOTA-D10CM) is a new tracer for PET imaging. We report here on in vitro and in vivo validation of the tracer's ability to target the macrophage mannose receptor CD206. METHODS: First, the uptake of intravenously (i.v.) administered Al[18F]F-NOTA-D10CM was compared between wild-type (WT) and CD206-/- knockout (KO) mice. C57BL/6N mice were injected with complete Freund's adjuvant (CFA) in the left hind leg and the uptake of Al[18F]F-NOTA-D10CM after i.v. or intradermal (i.d.) injection was studied at 5 and 14 days after CFA induction of inflammation. Healthy C57BL/6N mice were studied as controls. Mice underwent PET/CT on consecutive days with [18F]FDG, i.v. Al[18F]F-NOTA-D10CM, and i.d. Al[18F]F-NOTA-D10CM. After the last imaging, Al[18F]F-NOTA-D10CM was i.v. injected for an ex vivo biodistribution study and autoradiography of inflamed tissues. Blood plasma samples were analyzed using high-performance liquid chromatography. To evaluate the specificity of Al[18F]F-NOTA-D10CM binding, an in vitro competitive displacement study was performed on inflamed tissue sections using autoradiography. CD206 expression was assessed by immunohistochemical staining. RESULTS: Compared with WT mice, the uptake of Al[18F]F-NOTA-D10CM was significantly lower in several CD206-/- KO mice tissues, including liver (SUV 8.21 ± 2.51 vs. 1.06 ± 0.16, P < 0.001) and bone marrow (SUV 1.63 ± 0.37 vs. 0.22 ± 0.05, P < 0.0001). The uptake of i.v. injected Al[18F]F-NOTA-D10CM was significantly higher in inflamed ankle joint (SUV 0.48 ± 0.13 vs. 0.18 ± 0.05, P < 0.0001) and inflamed foot pad skin (SUV 0.41 ± 0.10 vs. 0.04 ± 0.01, P < 0.0001) than in the corresponding tissues in healthy mice. The i.d.-injected Al[18F]F-NOTA-D10CM revealed differences between CFA-induced lymph node activation and lymph nodes in healthy mice. Ex vivo γ-counting, autoradiography, and immunohistochemistry supported the results, and a decrease of ~ 80% in the binding of Al[18F]F-NOTA-D10CM in the displacement study with excess NOTA-D10CM confirmed that tracer binding was specific. At 60 min after i.v. injection, an average 96.70% of plasma radioactivity was derived from intact Al[18F]F-NOTA-D10CM, indicating good in vivo stability. The uptake of Al[18F]F-NOTA-D10CM into inflamed tissues was positively associated with the area percentage of CD206-positive staining. CONCLUSION: The uptake of mannosylated dextran derivative Al[18F]F-NOTA-D10CM correlated with CD206 expression and the tracer appears promising for inflammation imaging.

Preclinical validation of a novel brain-penetrant PET ligand for visualization of histone deacetylase 6: a potential imaging target for neurodegenerative diseases.

PURPOSE: Histone deacetylase 6 (HDAC6) has emerged as a therapeutic target for neurodegenerative diseases such as Alzheimer's disease. Noninvasive imaging of HDAC6 in the brain by positron emission tomography (PET) would accelerate research into its roles in these diseases. We recently discovered an 18F-labeled derivative of the selective HDAC6 inhibitor SW-100 ([18F]FSW-100) as a potential candidate for brain HDAC6 radioligand. As a mandatory step prior to clinical translation, we performed preclinical validation of [18F]FSW-100. METHODS: Process validation of [18F]FSW-100 radiosynthesis for clinical use and assessment of preclinical toxicity and radiation dosimetry estimated from mouse distribution data were performed. In vitro selectivity of FSW-100 for 28 common receptors in the brain and HDAC isoforms was characterized. [18F]FSW-100 PET imaging was performed in non-human primates in a conscious state to estimate the feasibility of HDAC6 imaging in humans. RESULTS: Three consecutive validation runs of the automated radiosynthesis gave [18F]FSW-100 injections with radiochemical yields of 12%, and the injections conformed to specified quality control criteria for batch release. No acute toxicity was observed for non-radiolabeled FSW-100 or radioactivity decayed [18F]FSW-100 injection, and the former was negative in the Ames test. The whole-body effective dose estimated from biodistribution in mice was within the range of that of previously reported 18F-radioligands in humans. In vitro selectivity against common receptors and other HDAC isoforms was confirmed. [18F]FSW-100 demonstrated good penetration in monkey brain, and in vivo blocking studies suggested that the uptake was specific. CONCLUSION: These results support the clinical utility of [18F]FSW-100 for in vivo imaging of HDAC6 in the brain.

Radiosynthesis and biological evaluation of [18F]AG-120 for PET imaging of the mutant isocitrate dehydrogenase 1 in glioma.

Glioma are clinically challenging tumors due to their location and invasiveness nature, which often hinder complete surgical resection. The evaluation of the isocitrate dehydrogenase mutation status has become crucial for effective patient stratification. Through a transdisciplinary approach, we have developed an 18F-labeled ligand for non-invasive assessment of the IDH1R132H variant by using positron emission tomography (PET) imaging. In this study, we have successfully prepared diastereomerically pure [18F]AG-120 by copper-mediated radiofluorination of the stannyl precursor 6 on a TRACERlab FX2 N radiosynthesis module. In vitro internalization studies demonstrated significantly higher uptake of [18F]AG-120 in U251 human high-grade glioma cells with stable overexpression of mutant IDH1 (IDH1R132H) compared to their wild-type IDH1 counterpart (0.4 vs. 0.013% applied dose/µg protein at 120 min). In vivo studies conducted in mice, exhibited the excellent metabolic stability of [18F]AG-120, with parent fractions of 85% and 91% in plasma and brain at 30 min p.i., respectively. Dynamic PET studies with [18F]AG-120 in naïve mice and orthotopic glioma rat model reveal limited blood-brain barrier permeation along with a low uptake in the brain tumor. Interestingly, there was no significant difference in uptake between mutant IDH1R132H and wild-type IDH1 tumors (tumor-to-blood ratio[40-60 min]: ~1.7 vs. ~1.3). In conclusion, our preclinical evaluation demonstrated a target-specific internalization of [18F]AG-120 in vitro, a high metabolic stability in vivo in mice, and a slightly higher accumulation of activity in IDH1R132H-glioma compared to IDH1-glioma. Overall, our findings contribute to advancing the field of molecular imaging and encourage the evaluation of [18F]AG-120 to improve diagnosis and management of glioma and other IDH1R132H-related tumors.

Helix-to-Disc Conversion of Thia[6]helicenes into Coronenes Facilitated by Sulfur Oxidation and Fluorination.

Helicenes, with their unique helical structures, have long captured the interest of synthetic chemists, not only as end products, but also as versatile platforms for further chemical transformations. However, transforming [6]helicene into planar coronene typically requires harsh conditions and poses significant challenges. Herein, we demonstrate that replacing the terminal benzene ring of [6]helicene with a thiophene ring enables its photochemical transformation into coronene. Sulfur oxidation of the thiophene ring enables the corresponding thermal transformation, and the terminal tetrafluorination of the opposite benzene ring further accelerates this process, yielding 1,2-difluorocoronene, as confirmed by X-ray crystallography. The transformation begins with an intramolecular Diels-Alder reaction, whose activation energy is significantly lowered by these structural changes. Our findings underscore the utility of strategic modifications such as sulfur oxidation and fluorination in promoting this "helix-to-disc" conversion and opening new avenues for synthesizing functional polycyclic aromatics.

HFIP-Mediated Desulfinative Friedel-Crafts Cyclobutenylation Reaction.

In 1,1,1,3,3,3-hexafluoroisopropyl alcohol (HFIP), gem-bis(triflyl)cyclobutenes, which can be prepared by the (2+2) cycloaddition reaction of Tf2C=CH2 with alkynes, underwent desulfination to generate the corresponding cyclobutenyl cation. This unique reactivity was successfully applied to the Friedel-Crafts type cyclobutenylation reaction of several (hetero)aromatic compounds.

In-Cell 19F†NMR of Proteins: Recent Progress and Future Opportunities.

In vitro, 19F NMR methodology is preferably selected as a complementary and straightforward method for unveiling the conformations, dynamics, and interactions of biological molecules. Its effectiveness in vivo has seen continuous improvement, addressing challenges faced by conventional heteronuclear NMR experiments on structured proteins, such as severe line broadening, low signal-to-noise ratio, and background signals. Herein, we summarize the distinctive advantages of 19F NMR, along with recent progress in sample preparation and applications within the realm of in-cell NMR. Additionally, we offer insights into the future directions and prospects of this methodology based on our understanding.

Neutral Adducts of Molybdenum Hexafluoride Structure and Bonding in MoF6(NC5H5) and MoF6(NC5H5)2.

The first Lewis acid base adducts of MoF6 and an organic base have been synthesized, i.e., MoF6(NC5H5) and MoF6(NC5H5)2. These adducts are structurally characterized with X-ray crystallography, showing that both adducts adopt capped trigonal prismatic structures. The MoF6(NC5H5) and MoF6(NC5H5)2 adducts are fluxional on the NMR time scale at room temperature. Two different fluorine environments could be resolved by 19F NMR spectroscopy at -80 °C for the 1:2 adduct, MoF6(NC5H5)2, whereas MoF6(NC5H5) remains fluxional at that temperature. Density functional theory (DFT) calculations aide the assignment of the infrared and Raman spectra. Natural Bond Order and Molecular Electrostatic Potential analyses elucidate the structures and properties of the MoF6 pyridine adducts. Regions of significantly higher molecular electrostatic potential, i.e., σ-holes, in trigonal prismatic compared to octahedral MoF6 rationalize the capped trigonal prismatic geometry of the adducts. Whereas MoF6(NC5H5) is stable at room temperature under exclusion of moisture, MoF6(NC5H5)2 decomposes at 60 °C in pyridine solvent, and the solid slowly decomposes at room temperature after 24 h.

Synthesis and Lewis Acid Properties of Neutral Silver(III) Adducts Containing the AgIII(CF3)3 Moiety.

The acetonitrile AgIII complex [AgIII(CF3)3(NCCH3)] (2) has been reported independently by Eujen and Naumann in the last century, albeit with intriguing NMR discrepancy. In their reports, 2 was claimed to be obtained starting from either [AgIII(CF3)3Cl]- (3⋅Cl) or [AgIII(CF3)4]- (1) via halide abstraction using AgNO3 or acidic treatment, resp. These two synthetic routes are herein reinvestigated. The feasibility of Naumann's method is demonstrated, thus providing 2 yet accompanied by its s-triazinyl derivative [AgIII(CF3)3(C6H9N3)] (2'). The formation of 2' is unprecedented and was thereby investigated. Both 2 and 2' were isolated in pure fashion and fully characterized. In turn, halide extraction from 3⋅Cl leads to the AgIII-ONO2 anion 5 instead of 2, as evidenced by NMR spectroscopy, EA and Sc-XRD.