Could Adverse Effects of Antibiotics Due to Their Use/Misuse Be Linked to Some Mechanisms Related to Nonalcoholic Fatty Liver Disease?

Nonalcoholic fatty liver disease, recently re-named metabolic dysfunction-associated steatotic fatty liver disease, is considered the most prevalent liver disease worldwide. Its molecular initiation events are multiple and not always well-defined, comprising insulin resistance, chronic low-grade inflammation, gut dysbiosis, and mitochondrial dysfunction, all of them acting on genetic and epigenetic grounds. Nowadays, there is a growing public health threat, which is antibiotic excessive use and misuse. This widespread use of antibiotics not only in humans, but also in animals has led to the presence of residues in derived foods, such as milk and dairy products. Furthermore, antibiotics have been used for many decades to control certain bacterial diseases in high-value fruit and vegetables. Recently, it has been emphasised that antibiotic-induced changes in microbial composition reduce microbial diversity and alter the functional attributes of the microbiota. These antibiotic residues impact human gut flora, setting in motion a chain of events that leads straight to various metabolic alterations that can ultimately contribute to the onset and progression of NAFLD.

Recycling of polypropylene by supercritical carbon dioxide for extraction of contaminants from beverage cups. A comparison with polyethylene terephthalate and polylactic acid.

BACKGROUND: EU policies towards a circular economy address plastic packaging as one of the significant concerns and sets ambitious recycling targets. Polyolefins (POs) cannot be recycled for food contact using conventional polyethylene terephthalate (PET) recycling approaches. Thermal degradation prevents the use of high temperatures and, consequently, decontamination of POs may be insufficient when using lower temperatures. Polypropylene (PP) beverage cups were decontaminated using supercritical fluid extraction with carbon dioxide (scCO2 ). Decontamination efficiencies (DEs) of selected markers were determined in challenge tests following European Food Safety Authority guidelines. The effects of time (10-60 min) for PET, polylactic acid (PLA), and PP and temperature (60-80 °C) for PP were studied at constant pressure. The physical properties, sensorial properties, and overall migration of treated scCO2 PP were analysed and compared with virgin PP. RESULTS: PP showed the highest average DE, and PET the lowest, for all the surrogates and in all time conditions. A relative increase in the DE with the increase in process time, particularly for PET and to some extent for PLA, was seen. For PP, no significant impact of time and temperature was observed under the conditions tested. The DE of volatile surrogates was higher than that of semi-volatiles. Results indicate that the scCO2 treatment did not affect the physical and sensorial properties, nor the overall migration of PP, although it contributes to a considerable reduction in extractable n < C24 alkanes. CONCLUSIONS: Results indicate that scCO2 can be used to decontaminate post-consumption PP beverage cups with higher DEs than those for PET and PLA, applying mild processing conditions. © 2022 Society of Chemical Industry.

Tefluthrin: metabolism, food residues, toxicity, and mechanisms of action.

Tefluthrin is a Type I pyrethroid insecticide widely used all over the world. Residues of tefluthrin in various agricultural and animal-derived products may be related to potential human health risks. Tefluthrin metabolism in mammals involves hydrolysis of the ester bond to form cyclopropane acid and 4-methylbenzyl alcohol moieties, followed by oxidation. In this review manuscript, we provide crucial information regarding the toxicity of pyrethroids and propose natural antioxidants for amelioration poisoning in humans and animals. We call for the rational use of tefluthrin as an agrochemical product and for greater attention to the residual toxicity caused by tefluthrin in primary and succeeding crops. This greater attention is required given the global use of tefluthrin.

Factors influencing sorption of trace elements in contaminated waters onto ground nut shells.

Biosorbent materials such as nut shells has been considered a promising alternative to the classic methods to remove potentially toxic elements from contaminated waters, improving water quality for other uses. The present study evaluated the sorption capacity of almond, hazelnut, pistachio and walnut shells for the single and simultaneous removal of As, Cd, Co, Hg, Ni, Pb and Zn from contaminated waters. The influence of key parameters such as sorbent dose, ionic strength (ultrapure water vs. mineral water), element competition (mono-vs. multi-element spiked solution) and initial element concentration (maximum allowed value in wastewater discharges and ten times lower) was assessed. Hazelnut shells stood out as the material with higher potential to remove Cd, Co, Hg, Ni, Pb and Zn in the tested conditions, achieving up to 99% of removal (Cd and Pb). Arsenic was not removed by none of the studied materials and the removal of Cr was only obtained in a simple matrix and in mono-element solution (41% of removal). An increase of matrix complexity negatively affected the sorption capacity of all the biosorbents in the removal of all the elements tested. The same behavior was obtained when the elements were simultaneously present in solution, with Pb, Cd and Hg being highly influenced by the presence of other elements. The increase in sorbent dose from 1 to 5 g/L allowed to at least duplicate the removal of Cd, Co, Ni and Zn by all the biosorbents. When decreasing the initial element concentration ten times the maximum allowed value in wastewater discharges, a significant increase of elements removal was attained, more pronounced for Hg and Pb. The possibility to change initial conditions towards high efficiencies validate the high potential of those biosorbents to be used in water remediation, with special focus on hazelnut shells, although other sorbents such as walnut or almond shells can be considered efficient with appropriate initial conditions and depending on the target elements to be removed.

The food for feed concept. Performance of broilers fed hotel food residues.

1. In recent times the use of food waste in animal diets has gained considerable attention because of the increasing demand to cover the needs of human population and the high prices of conventional, arable based, animal feeds.2. The aim of the present study was to investigate the effect of adding dried human food waste to the diet of meat-type chickens (broilers). Two hundred, one-day-old broilers were divided into two treatment groups, with 10 replicate pens containing 10 birds per pen. The duration of the study was 42 days. In the control (C), the diet did not contain any food waste, whereas in the second treatment (T) food waste residues from hotels made up 15% of the diet. Diets had similar crude protein and metabolisable energy content.3. Feed intake and body weight were recorded in order to calculate weight gain and feed conversion ratio (FCR). Carcase and breast muscle yield, the weight of selected internal organs and the level of selected biochemical and haematological parameters were determined. Quality of breast muscle meat was assessed.4. Broilers fed the control treatment consumed more feed and gained more weight compared to broilers fed waste; however, the FCR was similar. No major differences were seen for internal organ weights and haematological parameters, although some differences were observed in colour traits and shear force of meat. It was concluded that there is a potential for use of food waste in broiler diets.

Green Extraction of Natural Colorants from Food Residues: Colorimetric Characterization and Nanostructuring for Enhanced Stability.

Food residues are a promising resource for obtaining natural pigments, which may replace artificial dyes in the industry. However, their use still presents challenges due to the lack of suitable sources and the low stability of these natural compounds when exposed to environmental variations. In this scenario, the present study aims to identify different food residues (such as peels, stalks, and leaves) as potential candidates for obtaining natural colorants through eco-friendly extractions, identify the colorimetric profile of natural pigments using the RGB color model, and develop alternatives using nanotechnology (e.g., liposomes, micelles, and polymeric nanoparticles) to increase their stability. The results showed that extractive solution and residue concentration influenced the RGB color profile of the pigments. Furthermore, the external leaves of Brassica oleracea L. var. capitata f. rubra, the peels of Cucurbita maxima, Cucurbita maxima x Cucurbita moschata, and Beta vulgaris L. proved to be excellent resources for obtaining natural pigments. Finally, the use of nanotechnology proved to be a viable alternative for increasing the stability of natural colorants over storage time.

Mannooligosaccharide production from açaí seeds by enzymatic hydrolysis: optimization through response surface methodology.

Recognized for its bioactive compounds, açaí has become a functional food, but it has a low pulp yield, and the seeds are the main waste. This study investigates the potential of açaí seeds (Euterpe oleracea Mart.) to produce mannooligosaccharides (MOS) through enzymatic hydrolysis. Using response surface methodology (RSM), the research optimizes MOS extraction while minimizing mannose production and reducing processing time, achieving MOS production of about 10 g/L, a value within the range of similar investigations. The RSM quadratic models establish correlations between MOS production (M2-M5) and enzymatic hydrolysis conditions, with R2 values ranging from 0.6136 to 0.9031. These models are used to emphasize MOS performance (M2-M5) while reducing mannose production, which also promotes profitability by reducing time. Experimental validation agrees with model predictions, highlighting optimal conditions near 40 °C, intermediate enzyme loading, and basic pH that effectively promotes MOS generation on mannose within an accelerated processing time frame. With predictions of experimental results within a margin of error of < 9%, the validity of the models was acceptable. This research contributes to the advancement of the understanding of the enzymatic hydrolysis of açaí seeds, which is a step toward the sustainable use of resources with a focus on process engineering aspects.

Efficient use of discarded vegetal residues as cost-effective feedstocks for microbial oil production.

BACKGROUND: Horticultural intensive type systems dedicated in producing greenhouse vegetables are one of the primary industries generating organic waste. Towards the implementation of a zero-waste strategy, this work aims to use discarded vegetables (tomato, pepper and watermelon) as feedstock for producing microbial oil using the oleaginous yeast Cryptococcus curvatus. RESULTS: The soluble fraction, resulting after crushing and centrifuging these residues, showed C/N ratios of about 15, with a total carbohydrate content (mainly glucose, fructose and sucrose) ranging from 30 g/L to 65 g/L. Using these liquid fractions as substrate under a pulse-feeding strategy with a concentrated glucose solution resulted in an intracellular total lipid accumulation of about 30% (w/w) of the total dry cell weight (DCW). To increase this intracellular lipid content, the initial C/N content was increased from 15 to 30 and 50. Under these conditions, the process performance of the pulse-feeding strategy increased by 20-36%, resulting in a total intracellular lipid concentration of 35-40% DCW (w/w). CONCLUSION: These results demonstrate the potential of discarded vegetables as a substrate for producing bio-based products such as microbial oil when proper cultivation strategies are available.

An innovative nanoparticle-modified carbon paste sensor for ultrasensitive detection of lignocaine and its extremely carcinogenic metabolite residues in bovine food samples: Application of NEMI, ESA, AGREE, ComplexGAPI, and RGB12 algorithms.

Nowadays, veterinary medicine residues have been viewed as a major threat to food safety worldwide, especially when dealing with carcinogenic residues. Herein, we present the first differential pulse voltammetric method for the quantification of lignocaine and its carcinogenic metabolite 2,6-xylidine residues in bovine food samples, aided by five greenness and whiteness assessment tools, including NEMI, ESA, ComplexGAPI, AGREE, and RGB12. The method depends on the electrochemical oxidation after modification of the carbon paste sensor with recycled Al2O3-NPs functionalized multi-walled carbon nanoparticles. The produced sensor (Al2O3-NPs/MWCNTs/CPE) was characterized using XRD, FT-IR, EDX, SEM, and TEM. As expected, the active surface area and electron transfer processes were accelerated by the modification, resulting in ultra-sensitive quantification with detection limits of 19.00 and 13.94 nM for lignocaine and 2,6-xylidine, respectively. In terms of greenness, whiteness, sustainability, analytical effectiveness, and economic and practical considerations, the proposed method outperforms the reported methods.

From Waste to Resource: Valorization of Lignocellulosic Agri-Food Residues through Engineered Hydrochar and Biochar for Environmental and Clean Energy Applications-A Comprehensive Review.

Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications.

Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment.

(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.

Effect of alkaline and deep eutectic solvents pretreatments on the recovery of lignin with antioxidant activity from grape stalks.

Grape stalks are lignocellulosic residues that can be valorized through the extraction of lignin - an underutilized biopolymer with high potential. Two lignin extraction methods, alkaline and deep eutectic solvents (DES), were studied, and experimental designs were carried out to obtain the best extraction conditions. The defined parameters for alkaline extraction allowed the recovery of ~48 % of lignin with low purity that was further improved with an autohydrolysis pretreatment (~79 % purity; ~32 % yield). Optimum parameters of DES method rendered high purity lignin (~90 %) without the need of a pretreatment and with a better yield (50.2 % (±2.3)) than the alkaline method. Both lignin fractions presented high antioxidant activities, being close to the antioxidant capacity of BHT for DPPH scavenging. Structural analysis proved the presence of lignin in both alkaline and DES samples with similar morphology. Overall, DES method was more efficient in the extraction of lignin from grape stalks besides its greener and sustainable nature. This work uses DES to extract lignin from this biomass while comparing it with a commonly classical method, proving that grape stalks can be used to extract lignin with a sustainable and efficient method rendering a final ingredient with value-added properties.

Biodiesel production using microbial lipids derived from food waste discarded by catering services.

Biodiesel production using microbial oil derived from food waste discarded by the hospilatity sector could provide a sustainable replacement for diesel fuel. Discarded potato peels were used in solid-state fermentations of Aspergillus awamori for the production of glucoamylase (30 U/g) and protease (50 U/g). Hospitality food waste hydrolysis led to 98% (w/w) starch to glucose conversion yields. Crude hydrolyzates were used in shake flask fermentations with the oleaginous yeast Rhodosporidium toruloides Y-27012 leading to 32.9 g/L total dry weight (TDW) with 36.4% (w/w) intracellular lipid content. Fed-bath bioreactor cultures resulted in TDW of 53.9 g/L and lipid concentration of 26.7 g/L. Principal component analysis showed a fatty acid profile similar to soybean oil and solid food waste oil. Microbial oil was transesterified into biodiesel with satisfactory performance considering the European standard EN 14214. This work demonstrated that valorization of food waste for biodiesel production is feasible.

Vegetable oils as green solvents for carotenoid extraction from pumpkin (Cucurbita argyrosperma Huber) byproducts: Optimization of extraction parameters.

Pumpkin pulp is the main waste generated by pumpkin seed growers. This agro-industrial waste is a valuable source of bioactive compounds, especially carotenoids (ß-carotene, α-carotene, and lutein), which exhibit a broad spectrum of health-promoting effects. In this study, vegetable oils (canola, corn, and soybean oil) were used as green solvent alternatives to conventional organic solvents for carotenoid extraction from dried pumpkin pulp (DPP) waste. The highest carotenoid extraction yield (CEY) was obtained with canola oil, at a 1:10 DPP/oil ratio. Response surface methodology (RSM) was used to optimize the extraction process parameters (temperature, time, and stirring rate) through a Box-Behnken design (BBD) maximizing CEY in canola oil. The extraction temperature and stirring rate were found to have a significant linear and quadratic effect, respectively, on CEY. Optimum conditions were achieved at 21.8 min, 250 rpm, and 60°C. Under these optimized conditions, the estimated value for CEY was 378.1 µg ß-carotene equivalents/g of DPP, corresponding to 61.6% of the total carotenoid content present in the DPP. In contrast, the observed experimental value was 373.2 µg ß-carotene equivalents/g of DPP (61.2%). The experimental value was very close to the estimated value, which verifies the model's adequacy and fit. This study shows an alternative method to extract carotenoids from DPP with canola oil, obtaining an oil naturally enriched with carotenoids that could be used as a potential functional ingredient in the development of food, cosmetics, and medicinal products. PRACTICAL APPLICATION: Pumpkin by-products are a potential carotenoid source. Vegetable oil can be used as an alternative solvent for carotenoid extraction from pumpkin residues to obtain an enriched carotenoid oil that can be used to formulate food products.

Miniaturized sample preparation techniques and ambient mass spectrometry as approaches for food residue analysis.

Analytical methods such as liquid chromatography (LC) and mass spectrometry (MS) are widely used techniques for the analyses of different classes of compounds. This is due to their highlighted capacity for separating and identifying components in complex matrices such food samples. However, in most cases, effective analysis of the target analyte becomes challenging due to the complexity of the sample, especially for quantification of trace concentrations. In this case, miniaturized sample preparation methods have been used as a strategy for analysis of complex matrices. This involves removing the interferents and concentrating the analytes in a sample. These methods combine simplicity and effectiveness and given their miniaturized scale, they are in accordance with green chemistry precepts. Besides, ambient mass spectrometry represents a new trend in fast and rapid analyses, especially for qualitative and screening analysis. However, for complex matrix analyses, sample preparation is still a difficult step and the miniaturized sample preparation techniques show great potential for an improved and widespread use of ambient mass spectrometry techniques. . This review aims to contribute as an overview of current miniaturized sample preparation techniques and ambient mass spectrometry methods as different approaches for selective and sensitive analysis of residues in food samples.

Polyphenols and their potential role to fight viral diseases: An overview.

Fruits, vegetables, spices, and herbs are a potential source of phenolic acids and polyphenols. These compounds are known as natural by-products or secondary metabolites of plants, which are present in the daily diet and provide important benefits to the human body such as antioxidant, anti-inflammatory, anticancer, anti-allergic, antihypertensive and antiviral properties, among others. Plentiful evidence has been provided on the great potential of polyphenols against different viruses that cause widespread health problems. As a result, this review focuses on the potential antiviral properties of some polyphenols and their action mechanism against various types of viruses such as coronaviruses, influenza, herpes simplex, dengue fever, and rotavirus, among others. Also, it is important to highlight the relationship between antiviral and antioxidant activities that can contribute to the protection of cells and tissues of the human body. The wide variety of action mechanisms of antiviral agents, such as polyphenols, against viral infections could be applied as a treatment or prevention strategy; but at the same time, antiviral polyphenols could be used to produce natural antiviral drugs. A recent example of an antiviral polyphenol application deals with the use of hesperidin extracted from Citrus sinensis. The action mechanism of hesperidin relies on its binding to the key entry or spike protein of SARS-CoV-2. Finally, the extraction, purification and recovery of polyphenols with potential antiviral activity, which are essential for virus replication and infection without side-effects, have been critically reviewed.

Effect of ball milling on cellulose nanoparticles structure obtained from garlic and agave waste.

The aim of this study was to obtain cellulose and cellulose nanoparticles (CNP) from garlic and agave wastes, as well as elucidating its structure at different scales using microscopy and spectroscopy techniques. Cellulose is isolated by using a sequential extractive process and monitored by CLSM and SEM, while CNP are produced in a high-energy planetary mill. FTIR and XRD confirmed the presence of cellulose type I and CI and Dhkl was used to evaluate the size of CNP. The corresponding crystalline structure, d-spacing and angles obtained from crystalline regions of CNP were estimated by TEM and computational simulation. It is shown that the triclinic phase is predominant in G, and a monoclinic conformation in CNP for A. The novelty of this contribution is to demonstrate that the crystalline structure of CNP, extracted from different agro-food wastes, depends on its initial microstructural arrangement (laminar or fibrillar).

Amazonian Bacuri (Platonia insignis Mart.) Fruit Waste Valorisation Using Response Surface Methodology.

Bacuri (Platonia insignis Mart) is a species from the Clusiaceae genus. Its fruit pulp is commonly used in South America in several food products, such as beverages, ice cream and candies. Only the pulp of the fruit is used, and the peels and seeds are considered waste from these industries. As a trioxygenated xanthone source, this species is of high interest for bioproduct development. This work evaluated the mesocarp and epicarp of bacuri fruits through different extraction methods and experimental conditions (pH, temperature and solvent) in order to determine the most effective method for converting this agro-industrial waste in a value-added bioproduct. Open-column procedures and HPLC and NMR experiments were performed to evaluate the chemical composition of the extracts, along with total phenols, total flavonoids and antioxidant activities (sequestration of the DPPH and ABTS radicals). A factorial design and response surface methodology were used. The best extraction conditions of substances with antioxidant properties were maceration at 50 °C with 100% ethanol as solvent for mesocarp extracts, and acidic sonication in 100% ethanol for epicarp extracts, with an excellent phenolic profile and antioxidant capacities. The main compounds isolated were the prenylated benzophenones garcinielliptone FC (epicarp) and 30-epi-cambogin (mesocarp). This is the first study analysing the performance of extraction methods within bacuri agro-industrial waste. Results demonstrated that shells and seeds of bacuri can be used as phenolic-rich bioproducts obtained by a simple extraction method, increasing the value chain of this fruit.

A Critical Review of the Status of Pesticide Exposure Management in Malawi.

Pesticides pose a significant risk to humans and the environment. This paper analyzes the measures used to manage pesticides in Malawi. Malawi's regulatory authority of pesticides, the Pesticides Control Board (PCB), faces a number of challenges including lack of facilities for analyzing pesticides and inadequate personnel to conduct risk assessment of pesticides. The PCB needs to provide access to information and opportunities among the public to make contributions regarding requirements, processes and policies for assessing pesticide risk and efficacy. There is also a need to enhance the capacity of PCB to assess pesticide poisoning in workers, monitor pesticide residues in food and environmental contamination, as well as to control the illegal importation and sale of pesticides. Just like in other countries such as South Africa, India and Sri Lanka, Malawi urgently needs to implement measures that can restrict the importation, production, sale and use of very toxic pesticides. Malawi also needs to develop measures for the effective management of pesticide waste containers as well as obsolete pesticides, where potential solutions include reducing the purchase of (unneeded) pesticides, treatment of obsolete pesticides in high-temperature cement kilns, as well as requesting pesticide dealers to adopt life-cycle management of their products.

Chemical characterisation and technical assessment of agri-food residues, marine matrices, and wild grasses in the South Mediterranean area: A considerable inflow for biorefineries.

The integration of easily available and under-exploited biomasses is considered a sustainable strategy in biorefining approaches. Mediterranean countries, especially Algeria, Morocco, and Tunisia, offer such under-exploited waste of different origins. This study revealed the chemical composition and phytochemical characteristics of various agri-food side-products, marine residues, and wild grasses collected in the Maghreb region. Results showed that these wastes contained variable proportions of polysaccharides, lignin, constitute molecules (proteins, lipids, and inorganic molecules) and, various secondary metabolites, mainly flavonoids and condensed tannins. Based on this, the Mediterranean waste was divided into three categories. The first category included waste with high lignin content (40 wt%). The second category contained waste with lignin content below 10 wt% and structural carbohydrate content below 50 wt%. Additionally, the waste in this category comprised noticeable amounts of flavonoids and condensed tannins, particularly from thistle, speedwell, and spurge. Finally, the third category included waste with lignin content above 15 wt% and carbohydrate content in the range of 45-55 wt%. The results also showed that the waste in the third category has a chemical composition similar to that of raw materials envisioned for use in European or North American commercial biorefineries. The findings of this study indicate that the biomass waste employed in this study can be used to develop marketable bioproducts and may be a potential raw material for a biorefinery facility.