High air humidity dampens salicylic acid pathway and NPR1 function to promote plant disease.

The occurrence of plant disease is determined by interactions among host, pathogen, and environment. Air humidity shapes various aspects of plant physiology and high humidity has long been known to promote numerous phyllosphere diseases. However, the molecular basis of how high humidity interferes with plant immunity to favor disease has remained elusive. Here we show that high humidity is associated with an "immuno-compromised" status in Arabidopsis plants. Furthermore, accumulation and signaling of salicylic acid (SA), an important defense hormone, are significantly inhibited under high humidity. NPR1, an SA receptor and central transcriptional co-activator of SA-responsive genes, is less ubiquitinated and displays a lower promoter binding affinity under high humidity. The cellular ubiquitination machinery, particularly the Cullin 3-based E3 ubiquitin ligase mediating NPR1 protein ubiquitination, is downregulated under high humidity. Importantly, under low humidity the Cullin 3a/b mutant plants phenocopy the low SA gene expression and disease susceptibility that is normally observed under high humidity. Our study uncovers a mechanism by which high humidity dampens a major plant defense pathway and provides new insights into the long-observed air humidity influence on diseases.

Observed humidity trends in dry regions contradict climate models.

Arid and semi-arid regions of the world are particularly vulnerable to greenhouse gas-driven hydroclimate change. Climate models are our primary tool for projecting the future hydroclimate that society in these regions must adapt to, but here, we present a concerning discrepancy between observed and model-based historical hydroclimate trends. Over the arid/semi-arid regions of the world, the predominant signal in all model simulations is an increase in atmospheric water vapor, on average, over the last four decades, in association with the increased water vapor-holding capacity of a warmer atmosphere. In observations, this increase in atmospheric water vapor has not happened, suggesting that the availability of moisture to satisfy the increased atmospheric demand is lower in reality than in models in arid/semi-arid regions. This discrepancy is most clear in locations that are arid/semi-arid year round, but it is also apparent in more humid regions during the most arid months of the year. It indicates a major gap in our understanding and modeling capabilities which could have severe implications for hydroclimate projections, including fire hazard, moving forward.

Dependence on relative humidity in the formation of reactive oxygen species in water droplets.

Water microdroplets (7 to 11 µm average diameter, depending on flow rate) are sprayed in a closed chamber at ambient temperature, whose relative humidity (RH) is controlled. The resulting concentration of ROS (reactive oxygen species) formed in the microdroplets, measured by the amount of hydrogen peroxide (H2O2), is determined by nuclear magnetic resonance (NMR) and by spectrofluorimetric assays after the droplets are collected. The results are found to agree closely with one another. In addition, hydrated hydroxyl radical cations (•OH-H3O+) are recorded from the droplets using mass spectrometry and superoxide radical anions (•O2-) and hydroxyl radicals (•OH) by electron paramagnetic resonance spectroscopy. As the RH varies from 15 to 95%, the concentration of H2O2 shows a marked rise by a factor of about 3.5 in going from 15 to 50%, then levels off. By replacing the H2O of the sprayed water with deuterium oxide (D2O) but keeping the gas surrounding droplets with H2O, mass spectrometric analysis of the hydrated hydroxyl radical cations demonstrates that the water in the air plays a dominant role in producing H2O2 and other ROS, which accounts for the variation with RH. As RH increases, the droplet evaporation rate decreases. These two facts help us understand why viruses in droplets both survive better at low RH values, as found in indoor air in the wintertime, and are disinfected more effectively at higher RH values, as found in indoor air in the summertime, thus explaining the recognized seasonality of airborne viral infections.

Ethylene signaling modulates air humidity responses in plants.

Air humidity significantly impacts plant physiology. However, the upstream elements that mediate humidity sensing and adaptive responses in plants remain largely unexplored. In this study, we define high humidity-induced cellular features of Arabidopsis plants and take a quantitative phosphoproteomics approach to obtain a high humidity-responsive landscape of membrane proteins, which we reason are likely the early checkpoints of humidity signaling. We found that a brief high humidity exposure (i.e., 0.5 h) is sufficient to trigger extensive changes in membrane protein abundance and phosphorylation. Enrichment analysis of differentially regulated proteins reveals high humidity-sensitive processes such as 'transmembrane transport', 'response to abscisic acid', and 'stomatal movement'. We further performed a targeted screen of mutants, in which high humidity-responsive pathways/proteins are disabled, to uncover genes mediating high humidity sensitivity. Interestingly, ethylene pathway mutants (i.e., ein2 and ein3eil1) display a range of altered responses, including hyponasty, reactive oxygen species level, and responsive gene expression, to high humidity. Furthermore, we observed a rapid induction of ethylene biosynthesis genes and ethylene evolution after high humidity treatment. Our study sheds light on the potential early signaling events in humidity perception, a fundamental but understudied question in plant biology, and reveals ethylene as a key modulator of high humidity responses in plants.

Low relative air humidity and increased stomatal density independently hamper growth in young Arabidopsis.

Stomatal pores in plant leaves mediate CO2 uptake for photosynthesis and water loss via transpiration. Altered stomatal density can affect plant photosynthetic capacity, water use efficiency, and growth, potentially providing either benefits or drawbacks depending on the environment. Here we explore, at different air humidity regimes, gas exchange, stomatal anatomy, and growth of Arabidopsis lines designed to combine increased stomatal density (epf1, epf2) with high stomatal sensitivity (ht1-2, cyp707a1/a3). We show that the stomatal density and sensitivity traits combine as expected: higher stomatal density increases stomatal conductance, whereas the effect is smaller in the high stomatal sensitivity mutant backgrounds than in the epf1epf2 double mutant. Growth under low air humidity increases plant stomatal ratio with relatively more stomata allocated to the adaxial epidermis. Low relative air humidity and high stomatal density both independently impair plant growth. Higher evaporative demand did not punish increased stomatal density, nor did inherently low stomatal conductance provide any protection against low relative humidity. We propose that the detrimental effects of high stomatal density on plant growth at a young age are related to the cost of producing stomata; future experiments need to test if high stomatal densities might pay off in later life stages.

Phase Transitions in Organic and Organic/Inorganic Aerosol Particles.

The phase state of aerosol particles can impact numerous atmospheric processes, including new particle growth, heterogeneous chemistry, cloud condensation nucleus formation, and ice nucleation. In this article, the phase transitions of inorganic, organic, and organic/inorganic aerosol particles are discussed, with particular focus on liquid-liquid phase separation (LLPS). The physical chemistry that determines whether LLPS occurs, at what relative humidity it occurs, and the resultant particle morphology is explained using both theoretical and experimental methods. The known impacts of LLPS on aerosol processes in the atmosphere are discussed. Finally, potential evidence for LLPS from field and chamber studies is presented. By understanding the physical chemistry of the phase transitions of aerosol particles, we will acquire a better understanding of aerosol processes, which in turn impact human health and climate.

Nuclear Quantum Effects Accelerate Charge Recombination but Boost the Stability of Inorganic Perovskites in Mild Humidity.

Experiments have demonstrated that mild humidity can enhance the stability of the CsPbBr3 perovskite, though the underlying mechanism remains unclear. Utilizing ab initio molecular dynamics, ring polymer molecular dynamics, and non-adiabatic molecular dynamics, our study reveals that nuclear quantum effects (NQEs) play a crucial role in stabilizing the lattice rigidity of the perovskite while simultaneously shortening the charge carrier lifetime. NQEs reduce the extent of geometric disorder and the number of atomic fluctuations, diminish the extent of hole localization, and thereby improve the electron-hole overlap and non-adiabatic coupling. Concurrently, these effects significantly suppress phonon modes and slow decoherence. As a result, these factors collectively accelerate charge recombination by a factor of 1.42 compared to that in scenarios excluding NQEs. The resulting sub-10 ns recombination time scales align remarkably well with experimental findings. This research offers novel insight into how moisture resistance impacts the stability and charge carrier lifetime in all-inorganic perovskites.

Association of weather variables with pathogens contributing to conjunctivitis worldwide.

PURPOSE: To identify weather variables associated with pathogens contributing to infectious conjunctivitis globally. METHODS: Sample collection and pathogen identification from patients with acute infectious conjunctivitis was performed from 2017 to 2023. We linked pathogens identified from 13 sites across 8 countries with publicly available weather data by geographic coordinates. Mixed effects logistic regression analysis was performed to estimate the associations between temperature, precipitation, and relative humidity exposures, and the prevalence of infection types (RNA virus, DNA virus, bacteria, and fungus). RESULTS: 498 cases from the United States, India, Nepal, Thailand, Burkina Faso, Niger, Vietnam, and Israel were included in the analysis. 8-day average precipitation (mm) was associated with increased odds of RNA virus infection (odds ratio (OR)=1.47, 95% confidence interval (CI): 1.12 to 1.93, P=0.01) and decreased odds of DNA infection (OR=0.62, 95% CI: 0.46 to 0.82, P<0.001). Relative humidity (%) was associated with increased odds of RNA virus infections (OR=2.64, 95% CI: 1.51 to 4.61, P<0.001), and fungal infections (OR=2.35, 95% CI: 1.19 to 4.66, P=0.01), but decreased odds of DNA virus (OR=0.58, 95%CI: 0.37 to 0.90, P=0.02) and bacterial infections (OR=0.42, 95% CI: 0.25 to 0.71, P<0.001). Temperature (°C) was not associated with ocular infections for any pathogen type. CONCLUSIONS: This study suggests that weather factors affect pathogens differently. Particularly, humidity and precipitation were predictors for pathogens contributing to conjunctivitis worldwide. Additional work is needed to clarify the effects of shifts in weather and environmental factors on ocular infectious diseases.

Effects of ambient temperature, relative humidity and absolute humidity on risk of nasopharyngeal carcinoma in China.

Nasopharyngeal carcinoma (NPC) has a unique geographic distribution. It is unknown whether meteorological factors are related to the incidence of NPC. To investigate the effect of ambient temperature, relative humidity (RH), and absolute humidity (AH) on the incidence of NPC, we collected the incidence rate of NPC in 2016 and meteorological data from 2006 to 2016 from 484 cities and counties across 31 provinces in China. Generalized additive models with quasi-Poisson regression and generalized linear models with natural cubic splines were employed respectively to elucidate the nonlinear relationships and specify the partial linear relationships. Subgroup and interactive analysis were also conducted. Temperature (R2 = 0.68, p < .001), RH (R2 = 0.47, p < .001), and AH (R2 = 0.70, p < .001) exhibited nonlinear correlations with NPC incidence rate. The risk of NPC incidence increased by 20.3% (95% confidence intervals [CI]: [18.9%, 21.7%]) per 1°C increase in temperature, by 6.3% (95% CI: [5.3%, 7.2%]) per 1% increase in RH, and by 32.2% (95% CI: [30.7%, 33.7%]) per 1 g/m3 increase in AH, between their the 25th and the 99th percentiles. In addition, the combination of low temperature and low RH was also related to increased risk (relative risk: 1.60, 95% CI: [1.18, 2.17]). Males and eastern or rural populations tended to be more vulnerable. In summary, this study suggests that ambient temperature, RH, and particularly AH are associated with the risk of NPC incidence.

High relative humidity environment alleviates hypoxia-induced pulmonary arterial hypertension in mice.

The environment has long been considered a crucial factor influencing the onset and progression of pulmonary diseases. Environmental therapy is also a practical treatment approach for many conditions. While research has explored the effects of factors like air pressure and oxygen concentration on pulmonary arterial hypertension (PAH), the impact of air humidity on PAH has not been investigated. In this study, we examined the role of different air humidity levels in a mouse model of PAH by controlling relative humidity. We induced PAH in mice using 10 % hypoxia, which led to significant thickening of the pulmonary vasculature, elevated right ventricular systolic pressure, and an increased right ventricular hypertrophy index (RVHI). However, when exposed to an environment with 80-95 % relative humidity, there was a marked reduction in the extent of pulmonary vascular remodeling, decreased vascular thickening, and lower RVHI, effectively preserving right heart function. Notably, changes in the Bmpr2/Tgf-ß signaling pathway were significant and may play a pivotal role in this protective effect. In summary, our findings indicate that high relative humidity confers a protective effect on hypoxia-induced PAH in mice, providing novel insights into potential treatments for PAH.

Low temperature and high humidity affect dynamics of chlorophyll biosynthesis and secondary metabolites in Cucumber.

BACKGROUND: During the cold season, low temperature (LT) and high relative humidity (HRH) are significant environmental factors in greenhouses and plastic tunnels, often hindering plant growth and development. The chlorophyll (Chl) biosynthesis inhibitory mechanisms under LT and HRH stress are still widely unclear. To understand how cucumbers seedlings respond to LT and HRH stress, we investigated the impact of these stressors on Chl biosynthesis. RESULTS: Our results revealed that individual LT, HRH and combined LT + HRH stress conditions affected chlorophyll a, b, total chlorophyll and carotenoid content, reducing the levels of these pigments. The levels of Chlorophyll precursors were also markedly reduced under LT and HRH stresses, with the greatest reduction observed in cucumber seedlings exposed to LT + HRH conditions (9/5℃, 95%HRH). The activities of glutamate-1-semialdehyde transaminase (GSA-AT), ALA dehydratase (ALAD), Mg-chelatase, and protochlorophyllide oxidoreductase (POR) were increased under individual LT, HRH, conditions but decreased by combination of LT + HRH stress condition. In addition, Chl biosynthesis related genes (except PBG) were upregulated by the HRH stress but were significantly downregulated under the LT + HRH stress condition in cucumber seedlings. Furthermore, the content of phenols, flavonoids and phenolic acids (cinnamic acid and caffeic acid) were significantly surged under LT + HRH treatment over the control. Histochemical observation showed higher O2- and H2O2 content in cucumber leaves during the LT and HRH stress. CONCLUSION: The results indicate that LT + HRH stress significantly impairs chlorophyll biosynthesis in cucumber seedlings by drastically reducing pigment accumulation, altering enzyme activity and gene expression. Additionally, LT + HRH stress induces oxidative damage, which further exacerbates the decline in chlorophyll content and affects overall cucumber metabolism.

Nylon Fabric/GO Based Self-Powered Humidity Sensor Based on the Galvanic Cell Principle with High Air Permeability and Rapid-Response.

Flexible humidity sensors have received more and more attention in people's lives, and the problems of gas permeability and power supply issues of the device have long been areas in need of improvement. In this work, inspired by the high air permeability of daily wear clothing and galvanic batteries, a self-powered humidity sensor with high air permeability and fast response is designed. A nylon fabric/GO net (as a humidity sensitive layer and solid electrolyte) is obtained by spraying technique. This structure enables the sensor to have fast response/recovery (0.78 s/0.93 s, calculated at 90% of the final value), ultra-high response (0.83 V) and excellent stability (over 150 cycles) at 35 °C. Such sensors are useful for health monitoring, such as non-contact monitoring of human respiratory rate before and after exercise, and monitoring a level of humidity in the palms, arms, and fingers. This research provides an idea for developing a flexible wearable humidity sensor that is both breathable and self-powered and can also be mass-produced similar to wearable clothing.

Humidity-Induced Degradation Mapping of Pt3Co ORR Catalyst for PEFC by In-Operando Electrochemistry and Ex Situ SAXS.

Understanding the degradation mechanisms of Pt-alloy catalysts is crucial for enhancing their durability. This study investigates the impact of relative humidity on Pt and Pt3Co catalysts using potential-cycling-based accelerated stress tests. Two conditions are investigated: 100% relative humidity on both sides, and a gradient with 30% at the anode and over 100% at the cathode. Pt3Co demonstrates sensitivity, with 77% performance loss and reductions in electrocatalyst surface area. Results demonstrate a 30% decrease in potential loss for Pt catalysts and a 77% increase for Pt3Co catalysts, indicating significant performance degradation in high humidity conditions, with Pt3Co exhibiting greater sensitivity. Measurements of electrochemically active surface area reinforce these findings. Resistance analysis using electrochemical impedance spectroscopy using equivalent circuit modeling reveals a threefold increase in Pt3Co MEAs' cathode charge transfer resistance and mass transport resistance during accelerated stress tests. Local current distribution analysis highlights differences between Pt catalyst and Pt3Co, with the latter displaying dealloying effects. Small-angle X-ray scattering reveals changes in particle and cluster sizes, indicating structural changes. Scanning electron microscopy highlights catalyst and membrane thickness variations, suggesting heterogeneity in Pt3Co. Under humidity gradients, Ostwald ripening plays a significant role in altering the catalyst's Pt3Co structure and subsequently impacting its performance.

Imparting Chemiresistor with Humidity-Independent Sensitivity toward Trace-Level Formaldehyde via Substitutional Doping Platinum Single Atom.

The modification of metal oxides with noble metals is one of the most effective means of improving gas-sensing performance of chemiresistors, but it is often accompanied by unintended side effects such as sensor resistance increases up to unmeasurable levels. Herein, a carbonization-oxidation method is demonstrated using ultrasonic spray pyrolysis technique to realize platinum (Pt) single atom (SA) substitutional doping into SnO2 (named PtSA-SnO2). The substitutional doping strategy can obviously enhance gas-sensing properties, and meanwhile decrease sensor resistance by two orders of magnitude (decreased from ≈850 to ≈2 MΩ), which are attributed to the tuning of band gap and fermi-level position, efficient single atom catalysis, and the raising of adsorption capability of formaldehyde, as validated by the state-of-the-art characterizations, such as spherical aberration-corrected scanning transmission electron microscopy (Cs-corrected STEM), in situ diffuse reflectance infrared Fourier transformed spectra (in situ DRIFT), CO temperature-programmed reduction (CO-TPR), and theoretical calculations. As a proof of concept, the developed PtSA-SnO2 sensor shows humidity-independent (30-70% relative humidity) gas-sensing performance in the selective detection of formaldehyde with high response, distinguishable selectivity (8< Sformaldehyde/Sinterferant <14), and ultra-low detection limit (10 ppb). This work presents a generalized and facile method to design high-performance metal oxides for chemical sensing of volatile organic compounds (VOCs).

Enhancing the Humidity Resistance of Triboelectric Nanogenerators: A Review.

Triboelectric nanogenerators (TENGs) are sustainable energy resources for powering electronic devices from miniature to large-scale applications. However, their output performance and stability can deteriorate significantly when TENGs are exposed to moisture or humidity caused by the ambient environment or human physiological activities. This review provides an overview of the recent research advancements in enhancing the humidity resistance of TENGs. Various approaches have been reviewed including encapsulation techniques, surface modification of triboelectric materials to augment hydrophobicity or superhydrophobicity, the creation of fibrous architectures for effective moisture dissipation, leveraging water assistance for TENG performance enhancement, and other strategies like charge excitation. These research efforts contribute to the improvement of environmental adaptability and lead to expanded practical TENG applications both as energy harvesters and self-powered sensors. The efficacy of these strategies and future challenges are also discussed to facilitate the continued development of resilient TENGs in high humidity environments.

Super-Flexible Water-Proof Actuators.

Humidity-responsive materials hold broad application prospects in sensing, energy production, and other fields. Particularly, humidity-sensitive, flexibility, and water resistance are pivotal factors in the development of optimized humidity-responsive materials. In this study, hydrophobic linear polyurethane and hydrophilic 4-vinylphenylboronic acid (4-VPBA) form a semi-intercross cross-linking network. This copolymer of polyurethane exhibits excellent humidity-sensitive, mechanical properties, and water resistance. Its maximum tensile strength and maximum elongation can reach 40.56 MPa and 543.47%, respectively. After being immersed in water at various temperatures for 15 days, it exhibited a swelling ratio of only 3.28% in water at 5 °C and 9.58% in water at 70 °C. While the presence of 4-VPBA network imparts humidity-sensitive, reversible, and multidirectional bending abilities, under the stimulus of water vapor, it can bend 43° within 1.4 s. The demonstrated material surpasses current bidirectional humidity actuators in actuating ability. Based on these characteristics, automatically opening waterproof umbrellas and windows, as well as bionic-arms, crawling robots, and self-propelled boats, are successfully developed.

Modulating the Distribution of Formamidinium Iodide by Ultrahigh Humidity Treatment Strategy for High-Quality Sequential Vapor Deposited Perovskite.

The quality of two-step processed perovskites is significantly influenced by the distribution of organic amine salts. Especially, modulating the distribution of organic amine salts remains a grand challenge for sequential vapor-deposited perovskites due to the blocking effect of bottom compact PbI2. Herein, an ultrahigh humidity treatment strategy is developed to facilitate the diffusion of formamidinium iodide (FAI) from the top surface to the buried bottom interface on the sequential vapor-deposited bilayer structure. Both experimental and theoretical investigations elucidate the mechanism that moisture helps to i) create FAI diffusion channels by inducing a phase transition from α- to δ-phase in the perovskite, and ii) enhance the diffusivity of FAI by forming hydrogen bonds. This ultrahigh humidity treatment strategy enables the formation of a desired homogeneous and high-quality α-phase after annealing. As a result, a champion efficiency of 22.0% is achieved and 97.5% of its initial performance is maintained after aging for 1050 h under ambient air with a relative humidity of up to 80%. This FAI diffusion strategy provides new insights into the reproducible, scalable, and high-performance sequential vapor-deposited perovskite solar cells.

Light-Modulated Humidity Sensing in Spiropyran Functionalized MoS2 Transistors.

The optically tuneable nature of hybrid organic/inorganic heterostructures tailored by interfacing photochromic molecules with 2D semiconductors (2DSs) can be exploited to endow multi-responsiveness to the exceptional physical properties of 2DSs. In this study, a spiropyran-molybdenum disulfide (MoS2) light-switchable bi-functional field-effect transistor is realized. The spiropyran-merocyanine reversible photo-isomerization has been employed to remotely control both the electron transport and wettability of the hybrid structure. This manipulation is instrumental for tuning the sensitivity in humidity sensing. The hybrid organic/inorganic heterostructure is subjected to humidity testing, demonstrating its ability to accurately monitor relative humidity (RH) across a range of 10%-75%. The electrical output shows good sensitivity of 1.0% · (%) RH-1. The light-controlled modulation of the sensitivity in chemical sensors can significantly improve their selectivity, versatility, and overall performance in chemical sensing.

An Impressive Open-Circuit Voltage of 1.223 V and High Humidity Stability of Perovskite Solar Cells with MgO Buffer Layer Deposited by Low-Temperature Atomic Layer Deposition.

The performance of perovskite solar cells has been continuously improving. However, humidity stability has become a key problem that hinders its promotion in the process of commercialization. A buffer layer deposited by atomic layer deposition is a very helpful method to solve this problem. In this work, MgO film is deposited between Spiro-OMeTAD and electrode by low-temperature atomic layer deposition at 80 °C, which resists the erosion of water vapor, inhibits the migration of electrode metal ions and the decomposition products of perovskite, then finally improves the stability of the device. At the same time, the MgO buffer layer can passivate the defects of porous Spiro, thus enhancing carrier transport efficiency and device performance. The Cs0.05(FAPbI3)0.85(MAPbBr3)0.15 perovskite device with a MgO buffer layer has displayed PCE of 22.74%, also with a high Voc of 1.223 V which is an excellent performance in devices with same perovskite component. Moreover, the device with a MgO buffer layer can maintain 80% of the initial efficiency after 7200 h of storage at 35% relative humidity under room temperature. This is a major achievement for humidity stability in the world, providing more ideas for further improving the stability of perovskite devices.

Regulating Water Adsorption Sites of Keto-Enamine COF by Base Exfoliation and Deprotonation for Enhanced Humidity Response.

Covalent organic framework (COF) has received much attention owing to its unique framework structure formed by diverse organic units. However, challenges, including low conductivity, structure instability, and limited control of adsorption and desorption processes, stimulate the modification of COF in electronic sensors. Herein, inspired by the alterable structure of COF in different solvents, a facile base exfoliation and deprotonation method is proposed to regulate the water adsorption sites and improve the intrinsic conductivity of TpPa-1 COF. TpPa-1 COF powders are exfoliated to nanosheets to increase water adsorption, while the deprotonation is utilized to adjust the affinity of water molecules on TpPa-1 COF framework, contributing to water accumulation in the 1D pores. The as-fabricated TpPa-1 COF sensor exhibits a decreased recovery time from 419 to 49 s, forming a linear relation between relative humidity (RH) value and humidity response. The excellent chemical stability of the covalent bond of TpPa-1 COF contributes to the excellent stable device performance in 30 days, promoting further integration and data analysis in respiration monitoring.