Near-Infrared Fluorescent Carbon Nanotube Sensors for the Plant Hormone Family Gibberellins.

Gibberellins (GAs) are a class of phytohormones, important for plant growth, and very difficult to distinguish because of their similarity in chemical structures. Herein, we develop the first nanosensors for GAs by designing and engineering polymer-wrapped single-walled carbon nanotubes (SWNTs) with unique corona phases that selectively bind to bioactive GAs, GA3 and GA4, triggering near-infrared (NIR) fluorescence intensity changes. Using a new coupled Raman/NIR fluorimeter that enables self-referencing of nanosensor NIR fluorescence with its Raman G-band, we demonstrated detection of cellular GA in Arabidopsis, lettuce, and basil roots. The nanosensors reported increased endogenous GA levels in transgenic Arabidopsis mutants that overexpress GA and in emerging lateral roots. Our approach allows rapid spatiotemporal detection of GA across species. The reversible sensor captured the decreasing GA levels in salt-treated lettuce roots, which correlated remarkably with fresh weight changes. This work demonstrates the potential for nanosensors to solve longstanding problems in plant biotechnology.

Photosynthesis and crop productivity are enhanced by glucose-functionalised carbon dots.

From global food security to textile production and biofuels, the demands currently made on plant photosynthetic productivity will continue to increase. Enhancing photosynthesis using designer, green and sustainable materials offers an attractive alternative to current genetic-based strategies and promising work with nanomaterials has recently started to emerge. Here we describe the in planta use of carbon-based nanoparticles produced by low-cost renewable routes that are bioavailable to mature plants. Uptake of these functionalised nanoparticles directly from the soil improves photosynthesis and also increases crop production. We show for the first time that glucose functionalisation enhances nanoparticle uptake, photoprotection and pigment production, unlocking enhanced yields. This was demonstrated in Triticum aestivum 'Apogee' (dwarf bread wheat) and resulted in an 18% increase in grain yield. This establishes the viability of a functional nanomaterial to augment photosynthesis as a route to increased crop productivity.

Applications of Nanotechnology in Plant Growth and Crop Protection: A Review.

In the era of climate change, global agricultural systems are facing numerous, unprecedented challenges. In order to achieve food security, advanced nano-engineering is a handy tool for boosting crop production and assuring sustainability. Nanotechnology helps to improve agricultural production by increasing the efficiency of inputs and minimizing relevant losses. Nanomaterials offer a wider specific surface area to fertilizers and pesticides. In addition, nanomaterials as unique carriers of agrochemicals facilitate the site-targeted controlled delivery of nutrients with increased crop protection. Due to their direct and intended applications in the precise management and control of inputs (fertilizers, pesticides, herbicides), nanotools, such as nanobiosensors, support the development of high-tech agricultural farms. The integration of biology and nanotechnology into nonosensors has greatly increased their potential to sense and identify the environmental conditions or impairments. In this review, we summarize recent attempts at innovative uses of nanotechnologies in agriculture that may help to meet the rising demand for food and environmental sustainability.

Plant nanobionic materials with a giant temperature response mediated by pectin-Ca2+.

Conventional approaches to create biomaterials rely on reverse engineering of biological structures, on biomimicking, and on bioinspiration. Plant nanobionics is a recent approach to engineer new materials combining plant organelles with synthetic nanoparticles to enhance, for example, photosynthesis. Biological structures often outperform man-made materials. For example, higher plants sense temperature changes with high responsivity. However, these properties do not persist after cell death. Here, we permanently stabilize the temperature response of isolated plant cells adding carbon nanotubes (CNTs). Interconnecting cells, we create materials with an effective temperature coefficient of electrical resistance (TCR) of -1,730% K(-1), ∼2 orders of magnitude higher than the best available sensors. This extreme temperature response is due to metal ions contained in the egg-box structure of the pectin backbone, lodged between cellulose microfibrils. The presence of a network of CNTs stabilizes the response of cells at high temperatures without decreasing the activation energy of the material. CNTs also increase the background conductivity, making these materials suitable elements for thermal and distance sensors.

A Nanobionic Light-Emitting Plant.

The engineering of living plants for visible light emission and sustainable illumination is compelling because plants possess independent energy generation and storage mechanisms and autonomous self-repair. Herein, we demonstrate a plant nanobionic approach that enables exceptional luminosity and lifetime utilizing four chemically interacting nanoparticles, including firefly luciferase conjugated silica (SNP-Luc), d-luciferin releasing poly(lactic-co-glycolic acid) (PLGA-LH2), coenzyme A functionalized chitosan (CS-CoA) and semiconductor nanocrystal phosphors for longer wavelength modulation. An in vitro kinetic model incorporating the release rates of the nanoparticles is developed to maximize the chemiluminescent lifetimes to exceed 21.5 h. In watercress (Nasturtium officinale) and other species, the nanoparticles circumvent limitations such as luciferin toxicity above 400 µM and colocalization of enzymatic reactions near high adenosine triphosphate (ATP) production. Pressurized bath infusion of nanoparticles (PBIN) is introduced to deliver a mixture of nanoparticles to the entire living plant, well described using a nanofluidic mathematical model. We rationally design nanoparticle size and charge to control localization within distinct tissues compartments with 10 nm nanoparticles localizing within the leaf mesophyll and stomata guard cells, and those larger than 100 nm segregated in the leaf mesophyll. The results are mature watercress plants that emit greater than 1.44 × 1012 photons/sec or 50% of 1 µW commercial luminescent diodes and modulate "off" and "on" states by chemical addition of dehydroluciferin and coenzyme A, respectively. We show that CdSe nanocrystals can shift the chemiluminescent emission to 760 nm enabling near-infrared (nIR) signaling. These results advance the viability of nanobionic plants as self-powered photonics, direct and indirect light sources.

A Ratiometric Sensor Using Single Chirality Near-Infrared Fluorescent Carbon Nanotubes: Application to In Vivo Monitoring.

Advances in the separation and functionalization of single walled carbon nanotubes (SWCNT) by their electronic type have enabled the development of ratiometric fluorescent SWCNT sensors for the first time. Herein, single chirality SWCNT are independently functionalized to recognize either nitric oxide (NO), hydrogen peroxide (H(2)O(2)), or no analyte (remaining invariant) to create optical sensor responses from the ratio of distinct emission peaks. This ratiometric approach provides a measure of analyte concentration, invariant to the absolute intensity emitted from the sensors and hence, more stable to external noise and detection geometry. Two distinct ratiometric sensors are demonstrated: one version for H(2)O(2), the other for NO, each using 7,6 emission, and each containing an invariant 6,5 emission wavelength. To functionalize these sensors from SWCNT isolated from the gel separation technique, a method for rapid and efficient coating exchange of single chirality sodium dodecyl sulfate-SWCNT is introduced. As a proof of concept, spatial and temporal patterns of the ratio sensor response to H(2)O(2) and, separately, NO, are monitored in leaves of living plants in real time. This ratiometric optical sensing platform can enable the detection of trace analytes in complex environments such as strongly scattering media and biological tissues.

From Nature to Technology: Exploring the Potential of Plant-Based Materials and Modified Plants in Biomimetics, Bionics, and Green Innovations.

This review explores the extensive applications of plants in areas of biomimetics and bioinspiration, highlighting their role in developing sustainable solutions across various fields such as medicine, materials science, and environmental technology. Plants not only serve essential ecological functions but also provide a rich source of inspiration for innovations in green nanotechnology, biomedicine, and architecture. In the past decade, the focus has shifted towards utilizing plant-based and vegetal waste materials in creating eco-friendly and cost-effective materials with remarkable properties. These materials are employed in making advancements in drug delivery, environmental remediation, and the production of renewable energy. Specifically, the review discusses the use of (nano)bionic plants capable of detecting explosives and environmental contaminants, underscoring their potential in improving quality of life and even in lifesaving applications. The work also refers to the architectural inspirations drawn from the plant world to develop novel design concepts that are both functional and aesthetic. It elaborates on how engineered plants and vegetal waste have been transformed into value-added materials through innovative applications, especially highlighting their roles in wastewater treatment and as electronic components. Moreover, the integration of plants in the synthesis of biocompatible materials for medical applications such as tissue engineering scaffolds and artificial muscles demonstrates their versatility and capacity to replace more traditional synthetic materials, aligning with global sustainability goals. This paper provides a comprehensive overview of the current and potential uses of living plants in technological advancements, advocating for a deeper exploration of vegetal materials to address pressing environmental and technological challenges.

Nanobionics: From plant empowering to the infectious disease treatment.

Infectious diseases (ID) are serious threats against the global health and socio-economic conditions. Vaccination usually plays a key role in disease prevention, however, insufficient efficiency or immunogenicity may be quite challenging. Using the advanced vectors for delivery of vaccines with suitable efficiency, safety, and immune-modulatory activity, and tunable characteristics could be helpful, but there are no systematic reviews confirming the capabilities of the vaccine delivery systems for covering various types of pathogens. Furthermore, high rates of the infections, transmission, and fatal ratio and diversity of the pathogens and infection mechanisms may negatively influence vaccine effectiveness. The absence of highly-effective antibiotics against the resistant strains of bacteria and longevity of antibiotic testing have provoked increasing needs towards the application of more accurate and specific theranostic strategies including the nanotechnology-based ones. Nanobionics which is based on the charge storage and transport in the molecular structures, could be of key value in the molecular diagnostic tests and highly-specific electro-analytical methods or devices. Such devices based on the early disease diagnostics might be of critical significance against various types of diseases. This article highlights the significance of nanobionics against ID.

Agri-Nanotechnology and Tree Nanobionics: Augmentation in Crop Yield, Biosafety, and Biomass Accumulation.

Nanomaterials (NMs) are the leading edge as an amazing class of materials that consists of at least one dimension in the range of 1-100 nm. NMs can be made with exceptional magnetic, electrical, and catalytic properties different from their bulk counterparts. We summarized unique features of NMs, their synthesis, and advances in agri-nanotechnology and cutting-edge nanobionics. The review describes advances in NMs including their applications, dosimetry to ensure biosafety, remote sensing of agro-forestry fields, nanofertilizers, and nanopesticides, and avoid post-harvest losses, gene delivery, and nanobionics. Tree nanobionics has enabled the synthesis and delivery of nanosensors, which enhance the rate of photosynthesis, detection of pathogens, and poisonous residues to ensure biosafety and biomass accumulation. Finally, we conclude by discussing challenges, future perspectives, and agro-ecological risks of using NMs.

Nanobionics in Crop Production: An Emerging Approach to Modulate Plant Functionalities.

The "Zero Hunger" goal is one of the key Sustainable Development Goals (SDGs) of the United Nations. Therefore, improvements in crop production have always been a prime objective to meet the demands of an ever-growing population. In the last decade, studies have acknowledged the role of photosynthesis augmentation and enhancing nutrient use efficiency (NUE) in improving crop production. Recently, the applications of nanobionics in crop production have given hope with their lucrative properties to interact with the biological system. Nanobionics have significantly been effective in modulating the photosynthesis capacity of plants. It is documented that nanobionics could assist plants by acting as an artificial photosynthetic system to improve photosynthetic capacity, electron transfer in the photosystems, and pigment content, and enhance the absorption of light across the UV-visible spectrum. Smart nanocarriers, such as nanobionics, are capable of delivering the active ingredient nanocarrier upon receiving external stimuli. This can markedly improve NUE, reduce wastage, and improve cost effectiveness. Thus, this review emphasizes the application of nanobionics for improving crop yield by the two above-mentioned approaches. Major concerns and future prospects associated with the use of nanobionics are also deliberated concisely.

Nanobionics-Driven Synthesis of Molybdenum Oxide Nanosheets with Tunable Plasmonic Resonances in Visible Light Regions.

Nanobionics-driven synthesis offers a process of designing and synthesizing functional materials on a nanoscale based on the structures and functions of biological systems. An approach such as this is environmentally friendly and sustainable, providing a viable option for synthesizing functional nanomaterials for catalysis and nanoelectronic components. In this work, we present a facile and green nanobionics approach to synthesize plasmonic HxMoO3 by interacting chloroplasts extracted from spinach with two-dimensional (2D) MoO3 nanoflakes. The generated plasmon resonances can be modulated in the visible wavelength ranges, and the efficiency to form the plasmonic materials is enhanced by 90% within 45 min of light excitation compared to reactions without chloroplast involvement. Such a characteristic is ascribed to the interfacial carrier dynamics between the two entities in the reactions, in which highly doped metal oxides with quasi-metallic properties can be formed to generate optical absorptions in the visible light region. The green synthesized plasmonic materials show high photocatalytic activities without the coupling of semiconductors, providing a promising nanoelectronics unit, based on the nanobionics-driven synthesized plasmonic materials.

A comparative study on the modulatory role of mesoporous silica nanoparticles MCM 41 and MCM 48 on growth and metabolism of dicot Vigna radiata.

With the advent of nanoscience, nanotechnology and their applications in various fields, mesoporous silica nanoparticles have gained popularity due to their stability, biocompatibility, unique honeycomb-like structures - ordered and random by nature, large surface to volume ratio, porosity, active surfaces, high loading capacity, ease of interactions with solvent, solute and suspended particles. These multitudes of intrinsic properties have motivated us towards an interdisciplinary detailed study on applications of mesoporous silica with an intention in increasing efficacy of productivity, growth if any, in plant life. This study aims at finding modus operandi of the structural uniqueness and eccentricity of various types of mesoporous silica in maneuvering their own functionality as a potential regulator for growth of seedlings of model plant Vigna radiata. We undertook characterization of surface, morphology, epitome of porosity for MCM 41 and MCM 48 using various experimental techniques followed by application of the same to growing seedlings at various dosages. It turned out that mesoporous silica nanoparticles, inarguably have higher efficacy in promoting plant growth, reducing stress, and enhancing basic metabolic rates at optimum dosage. Optimal operation point was determined at effective dosages for MCM 41 and MCM 48 those are being much lower than that of conventional silica nanoparticles. This optimum dosage is attributed to the structures of the nanoparticles used and implied further that higher pore volume, higher surface to volume ratio in case of MCM 41 at higher dosage lead to better adsorption of ions and functionality in contrast to that of MCM 48.

Nanosensor Detection of Synthetic Auxins In Planta using Corona Phase Molecular Recognition.

Synthetic auxins such as 1-naphthalene acetic acid (NAA) and 2,4-dichlorophenoxyacetic acid (2,4-D) have been extensively used in plant tissue cultures and as herbicides because they are chemically more stable and potent than most endogenous auxins. A tool for rapid in planta detection of these compounds will enhance our knowledge about hormone distribution and signaling and facilitate more efficient usage of synthetic auxins in agriculture. In this work, we show the development of real-time and nondestructive in planta NAA and 2,4-D nanosensors based on the concept of corona phase molecular recognition (CoPhMoRe), to replace the current state-of-the-art sensing methods that are destructive and laborious. By designing a library of cationic polymers wrapped around single-walled carbon nanotubes with general affinity for chemical moieties displayed on auxins and its derivatives, we developed selective sensors for these synthetic auxins, with a particularly large quenching response to NAA (46%) and a turn-on response to 2,4-D (51%). The NAA and 2,4-D nanosensors are demonstrated in planta across several plant species including spinach, Arabidopsis thaliana (A. thaliana), Brassica rapa subsp. chinensis (pak choi), and Oryza sativa (rice) grown in various media, including soil, hydroponic, and plant tissue culture media. After 5 h of 2,4-D supplementation to the hydroponic medium, 2,4-D is seen to accumulate in susceptible dicotyledon pak choi leaves, while no uptake is observed in tolerant monocotyledon rice leaves. As such, the 2,4-D nanosensor had demonstrated its capability for rapid testing of herbicide susceptibility and could help elucidate the mechanisms of 2,4-D transport and the basis for herbicide resistance in crops. The success of the CoPhMoRe technique for measuring these challenging plant hormones holds tremendous potential to advance the plant biology study.

Plant Nanobionic Sensors for Arsenic Detection.

Arsenic is a highly toxic heavy-metal pollutant which poses a significant health risk to humans and other ecosystems. In this work, the natural ability of wild-type plants to pre-concentrate and extract arsenic from the belowground environment is exploited to engineer plant nanobionic sensors for real-time arsenic detection. Near-infrared fluorescent nanosensors are specifically designed for sensitive and selective detection of arsenite. These optical nanosensors are embedded in plant tissues to non-destructively access and monitor the internal dynamics of arsenic taken up by the plants via the roots. The integration of optical nanosensors with living plants enables the conversion of plants into self-powered autosamplers of arsenic from their environment. Arsenite detection is demonstrated with three different plant species as nanobionic sensors. Based on an experimentally validated kinetic model, the nanobionic sensor could detect 0.6 and 0.2 ppb levels of arsenic after 7 and 14 days respectively by exploiting the natural ability of Pteris cretica ferns to hyperaccumulate and tolerate exceptionally high level of arsenic. The sensor readout could also be interfaced with portable electronics at a standoff distance, potentially enabling applications in environmental monitoring and agronomic research.

Functional nanomaterials to augment photosynthesis: evidence and considerations for their responsible use in agricultural applications.

At the current population growth rate, we will soon be unable to meet increasing food demands. As a consequence of this potential problem, considerable efforts have been made to enhance crop productivity by breeding, genetics and improving agricultural practices. While these techniques have traditionally been successful, their efficacy since the 'green revolution' has begun to significantly plateau. This stagnation of gains combined with the negative effects of climate change on crop yields has prompted researchers to develop novel and radical methods to increase crop productivity. Recent work has begun exploring the use of nanomaterials as synthetic probes to augment how plants use light. Photosynthesis in crops is often limited by their ability to absorb and exploit solar energy for photochemistry. The capacity to interact with and optimize how plants use light has the potential to increase the productivity of crops and enable the tailoring of crops for different environments and to compensate for predicted climate changes. Advances in the synthesis and surface modification of nanomaterials have overcome previous drawbacks and renewed their potential use as synthetic probes to enhance crop yields. Here, we review the current applications of functional nanomaterials in plants and will make an argument for the continued development of promising new nanomaterials and future applications in agriculture. This will highlight that functional nanomaterials have the clear potential to provide a much-needed route to enhanced future food security. In addition, we will discuss the often-ignored current evidence of nanoparticles present in the environment as well as inform and encourage caution on the regulation of nanomaterials in agriculture.