Genomic analysis and biodesulfurization potential of a new carbon-sulfur bond cleaving Tsukamurella sp. 3OW.

Direct combustion of sulfur-enriched liquid fuel oil causes sulfur oxide emission, which is one of the main contributors to air pollution. Biodesulfurization is a promising and eco-friendly method to desulfurize a wide range of thiophenic compounds present in fuel oil. Previously, numerous bacterial strains from genera such as Rhodococcus, Corynebacterium, Gordonia, Nocardia, Mycobacterium, Mycolicibacterium, Paenibacillus, Shewanella, Sphingomonas, Halothiobacillus, and Bacillus have been reported to be capable of desulfurizing model thiophenic compounds or fossil fuels. In the present study, we report a new desulfurizing bacterium, Tsukamurella sp. 3OW, capable of desulfurization of dibenzothiophene through the carbon-sulfur bond cleavage 4S pathway. The bacterium showed a high affinity for the hydrocarbon phase and broad substrate specificity towards various thiophenic compounds. The overall genome-related index analysis revealed that the bacterium is closely related to Tsukamurella paurometabola species. The genomic pool of strain 3OW contains 57 genes related to sulfur metabolism, including the key dszABC genes responsible for dibenzothiophene desulfurization. The DBT-adapted cells of the strain 3OW displayed significant resilience and viability in elevated concentrations of crude oil. The bacterium showed a 19 and 37% reduction in the total sulfur present in crude and diesel oil, respectively. Furthermore, FTIR analysis indicates that the oil's overall chemistry remained unaltered following biodesulfurization. This study implies that Tsukamurella paurometabola species, previously undocumented in the context of biodesulfurization, has good potential for application in the biodesulfurization of petroleum oils.

Screening, nutritional optimization and purification for phytase produced by Enterobacter aerogenes and its role in enhancement of hydrocarbons degradation and biofilm inhibition.

In this study, a novel isolate of Enterobacter aerogenes isolated from contaminated soils with hydrocarbons had extracellular phytate-degrading activity. Enterobacter aerogenes isolates were identified by biochemical tests and confirmed by16S rRNA gene products (amplified size 211bp) for genotypic detection. The phytase activity was reached to maximum activity when this isolate was cultivated under the optimal conditions which consisted of using minimal salt medium containing 1%(w/v) rice bran as a sole source for carbon and 2% (w/v) yeast extract at pH 5.5 and temperature of 50°C for 48 h. The phytase had purified to homogeneity by 50% ammonium sulphate precipitation, ion exchange and gel filtration chromatography with 75.7 fold of purification and a yield of 30.35%. The purified phytase is a single peptide with approximate molecular mass of 42 kDa as assessed by SDS-PAGE. The highest degradative ability by Enterobacter aerogenes of black oil, white oil and used engine oil had observed after 72 h of incubation. Rapid degradation of black oil and used engine oil had also observed while slow degradation of white oilat all time of incubation. The purified phytase inhibited biofilm formation ability in a dose-dependent manner for all Gram-negative and Gram-positive biofilm-forming bacteria and a significant difference in cell surface hydrophobicity was observed after exposure of planktonic cells to phytase for hour. The hydrolyzing effect of phytase released by Enterobacter aerogenes for complex salts of phosphorus that are insoluble in the soil led to increase of phosphorus concentrations and enhanced the ability of Enterobacter aerogenes to degrade a specific hydrocarbon in contaminated soil so that the phytase has a promising application in bioremediation of contaminated soils with hydrocarbons.

Polycyclic aromatic hydrocarbons degrading microflora in a tropical oil-production well.

The surrounding environment near Dagang oil-production well suffers polycyclic aromatic hydrocarbons (PAHs) pollution. In the present study, indigenous microorganisms capable of degrading PAHs were isolated and the efficiency of PAHs removal was investigated. Seven PAH-degrading strains were isolated with the ability to grow on naphthalene, phenanthrene, pyrene and fluorene. They belonged to the genus Pseudomonas, Bacillus and Rhodococcus. The strain having the highest degrading capacity for each PAH was selected by the screening test. The removal efficiency of PAHs was found to be in the order of naphthalene > fluorene > phenanthrene > pyrene. The kinetics of PAHs degradation was then followed by liquid chromatography determination and the results showed it conforms to a first-order reaction kinetic model. This study would be highly important for investigating the ability of microorganisms to utilize PAHs as growth substrates.

Polyphasic approach for assessing changes in an autochthonous marine bacterial community in the presence of Prestige fuel oil and its biodegradation potential.

A laboratory experiment was conducted to identify key hydrocarbon degraders from a marine oil spill sample (Prestige fuel oil), to ascertain their role in the degradation of different hydrocarbons, and to assess their biodegradation potential for this complex heavy oil. After a 17-month enrichment in weathered fuel, the bacterial community, initially consisting mainly of Methylophaga species, underwent a major selective pressure in favor of obligate hydrocarbonoclastic microorganisms, such as Alcanivorax and Marinobacter spp. and other hydrocarbon-degrading taxa (Thalassospira and Alcaligenes), and showed strong biodegradation potential. This ranged from >99% for all low- and medium-molecular-weight alkanes (C(15)-C(27)) and polycyclic aromatic hydrocarbons (C(0)- to C(2)- naphthalene, anthracene, phenanthrene, dibenzothiophene, and carbazole), to 75-98% for higher molecular-weight alkanes (C(28)-C(40)) and to 55-80% for the C(3) derivatives of tricyclic and tetracyclic polycyclic aromatic hydrocarbons (PAHs) (e.g., C(3)-chrysenes), in 60 days. The numbers of total heterotrophs and of n-alkane-, aliphatic-, and PAH degraders, as well as the structures of these populations, were monitored throughout the biodegradation process. The salinity of the counting medium affects the counts of PAH degraders, while the carbon source (n-hexadecane vs. a mixture of aliphatic hydrocarbons) is a key factor when counting aliphatic degraders. These limitations notwithstanding, some bacterial genera associated with hydrocarbon degradation (mainly belonging to α- and γ-Proteobacteria, including the hydrocarbonoclastic Alcanivorax and Marinobacter) were identified. We conclude that Thalassospira and Roseobacter contribute to the degradation of aliphatic hydrocarbons, whereas Mesorhizobium and Muricauda participate in the degradation of PAHs.

[Isolation and identification of a thermophilic anaerobic bacterium].

OBJECTIVE: To find new microbial resources from a high-temperature oil reservoir. METHODS: Strain HL-3 was isolated by Hungate Anaerobic Technique from oil reservoir water sampled from Dagang oilfield, China. Through physiological, biochemical and phylogenetic analysis, the strain HL-3 was classified. RESULTS: Cells were Gram-positive. The temperature range for growth was 40 degrees C-75 degrees C (optimum at 60 degrees C) and the pH range was 5.0-8.0 (optimum at 6.5). The isolate could grow in the presence of 0%-3.2% NaCl (optimum at 0.25%). Glucose, ribose, mannose, xylose and cellobiose could be metabolized. Metabolites of glucose were ethanol, acetate, CO2 and trace amount of propionate and butanol. The G + C content of DNA was 33.9 mol%. Based on 16S rRNA studies,strain HL-3 was most close to T. uzonensis DSM 18761T (EF530067) with 98.8% similarity and to T. sulfurigignens DSM 17917T (AF234164) with the 98.1% similarity. Strain HL-3 tolerated to high sulfite (0. 1mol/L) ions and extremely high concentration of thiosulfate (0.8 mol/L). When the concentration of thiosulfate was higher than 0.075 mol/L, the cell would generate S element granular. The presence of H2S gas was detected inside of space at the top of serum bottle. Strain HL-3 together with T. uzonensis DSM 18761T differed greatly in toleration of thiosulfate and sulfite. The toleration of strain HL-3 to thiosulfate and sulfite was most close to T. sulfurigignens DSM 17917T (AF234164). In addition, strain HL-3 to metabolite thiosulfate and sulfite was also similar with T. sulfurigignens DSM 17917T (AF234164). However, it differs largely from both of them to metabolize glucose. CONCLUSION: Therefore, strain HL-3 may be a new spieces of the Thermoanaerobacter, and the definitive classification positioning is still awaiting for further verified with the method of determination of whole-genome DNA-DNA similarity

Metabolic versatility and indigenous origin of the archaeon Thermococcus sibiricus, isolated from a siberian oil reservoir, as revealed by genome analysis.

Thermococcus species are widely distributed in terrestrial and marine hydrothermal areas, as well as in deep subsurface oil reservoirs. Thermococcus sibiricus is a hyperthermophilic anaerobic archaeon isolated from a well of the never flooded oil-bearing Jurassic horizon of a high-temperature oil reservoir. To obtain insight into the genome of an archaeon inhabiting the oil reservoir, we have determined and annotated the complete 1,845,800-base genome of T. sibiricus. A total of 2,061 protein-coding genes have been identified, 387 of which are absent in other members of the order Thermococcales. Physiological features and genomic data reveal numerous hydrolytic enzymes (e.g., cellulolytic enzymes, agarase, laminarinase, and lipases) and metabolic pathways, support the proposal of the indigenous origin of T. sibiricus in the oil reservoir, and explain its survival over geologic time and its proliferation in this habitat. Indeed, in addition to proteinaceous compounds known previously to be present in oil reservoirs at limiting concentrations, its growth was stimulated by cellulose, agarose, and triacylglycerides, as well as by alkanes. Two polysaccharide degradation loci were probably acquired by T. sibiricus from thermophilic bacteria following lateral gene transfer events. The first, a "saccharolytic gene island" absent in the genomes of other members of the order Thermococcales, contains the complete set of genes responsible for the hydrolysis of cellulose and beta-linked polysaccharides. The second harbors genes for maltose and trehalose degradation. Considering that agarose and laminarin are components of algae, the encoded enzymes and the substrate spectrum of T. sibiricus indicate the ability to metabolize the buried organic matter from the original oceanic sediment.

Populations of heavy fuel oil-degrading marine microbial community in presence of oil sorbent materials.

AIMS: To investigate the feasibility of applying sorbent material X-Oil in marine oil spill mitigation and to survey the interactions of oil, bacteria and sorbent. METHODS AND RESULTS: In a series of microcosms, 25 different treatments including nutrient amendment, bioaugmentation with Alcanivorax borkumensis and application of sorbent were tested. Microbial community dynamics were analysed by DNA fingerprinting methods, RISA and DGGE. Results of this study showed that the microbial communities in microcosms with highly active biodegradation were strongly selected in favour of A. borkumensis. Oxygen consumption measurements in microcosms and gas chromatography of oil samples indicated the fast and intense depletion of linear alkanes as well as high oxygen consumption within 1 week followed by consequent slower degradation of branched and polyaromatic hydrocarbons. CONCLUSION: Under given conditions, A. borkumensis was an essential organism for biodegradation, dominating the biofilm microbial community formation and was the reason of emulsification. SIGNIFICANCE AND IMPACT OF THE STUDY: This study strongly emphasizes the pivotal importance of A. borkumensis as an essential organism in the initial steps of marine hydrocarbon degradation. Interaction with the sorbent material X-Oil proved to be neutral to beneficial for biodegradation and also promoted the growth of yet unknown micro-organisms.

Sulfide persistence in oil field waters amended with nitrate and acetate.

Nitrate amendment is normally an effective method for sulfide control in oil field-produced waters. However, this approach has occasionally failed to prevent sulfide accumulation, despite the presence of active nitrate-reducing bacterial populations. Here, we report our study of bulk chemical transformations in microcosms of oil field waters containing nitrate-reducing, sulfide-oxidizing bacteria, but lacking denitrifying heterotrophs. Amendment with combinations of nitrate, acetate, and phosphate altered the microbial sulfur and nitrogen transformations. Elemental sulfur produced by chemotrophic nitrate-reducing bacteria was re-reduced heterotrophically to sulfide. Ammonification, rather than denitrification, was the predominant pathway for nitrate reduction. The application of nitrite led to transient sulfide depletion, possibly due to higher rates of nitrite reduction. The addition of molybdate suppressed both the accumulation of sulfide and the heterotrophic reduction of nitrate. Therefore, sulfidogenesis was likely due to elemental sulfur-reducing heterotrophic bacteria, and the nitrate-reducing microbial community consisted mainly of facultatively chemotrophic microbes. This study describes one set of conditions for continued sulfidogenesis during nitrate reduction, with important implications for nitrate control of sulfide production in oil fields.

Biodegradation of international jet A-1 aviation fuel by microorganisms isolated from aircraft tank and joint hydrant storage systems.

Microorganisms contaminating international Jet A-1 aircraft fuel and fuel preserved in Joint Hydrant Storage Tank (JHST) were isolated, characterized and identified. The isolates were Bacillus subtillis, Bacillus megaterium, Flavobacterium oderatum, Sarcina flava, Micrococcus varians, Pseudomonas aeruginosa, Bacillus licheniformis, Bacillus cereus and Bacillus brevis. Others included Candida tropicalis, Candida albicans, Saccharomyces estuari, Saccharomyces cerevisiae, Schizosaccharomyces pombe, Aspergillus flavus, Aspergillus niger, Aspergillus fumigatus, Cladosporium resinae, Penicillium citrinum and Penicillium frequentans. The viable plate count of microorganisms in the Aircraft Tank ranged from 1.3 (+/-0.01) x 104 cfu/mL to 2.2 (+/-1.6) x 104 cfu/mL for bacteria and 102 cfu/mL to 1.68 (+/-0.32) x 103 cfu/mL for fungi. Total bacterial counts of 1.79 (+/-0.2) x 104 cfu/mL to 2.58 (+/-0.04) x 104 cfu/mL and total fungal count of 2.1 (+/-0.1) x 103 cfu/mL to 2.28 (+/-0.5) x 103 cfu/mL were obtained for JHST. Selected isolates were re-inoculated into filter sterilized aircraft fuels and biodegradation studies carried out. After 14 days incubation, Cladosporium resinae exhibited the highest degradation rate with a percentage weight loss of 66 followed by Candida albicans (60.6) while Penicillium citrinum was the least degrader with a weight loss of 41.6%. The ability of the isolates to utilize the fuel as their sole source of carbon and energy was examined and found to vary in growth profile between the isolates. The results imply that aviation fuel could be biodegraded by hydrocarbonoclastic microorganisms. To avert a possible deterioration of fuel quality during storage, fuel pipe clogging and failure, engine component damage, wing tank corrosion and aircraft disaster, efficient routine monitoring of aircraft fuel systems is advocated.

Bacterial contamination of automotive fuels in a tropical region: the case of Costa Rica.

Microbial contamination of fuel has been the cause of several problems in transportation and storage of these products. Due to the lack of previous studies related to these problems in Costa Rica, bacterial quality was evaluated biannually in automotive fuels stored in the four oil distribution facilities of the Costa Rican Petroleum Refinery (RECOPE). In 12 oil storage tanks, for a total of 96 samples, mesophilic, heterotrophic aerobic/facultative counts (ASTM D6974-04) and identification of bacteria presented in regular gas, premium gas and diesel from the bottom and superior part of the tanks were done; in the samples containing an aqueous phase, sulfate reducing bacteria (SRB) were also quantified by the most probable number technique (MPN), according to the ASTM D4412-84 standard. The higher contamination was shown at the bottom of the tanks (populations up to 10(4) UFC/l), especially if there was accumulated water, in which case populations reached 10(8) UFC/l. The most contaminated fuel was diesel (counts up to 10(4) UFC/l), whereas the less contaminated was premium gas. The less contaminated fuels were from the facilities of La Garita and Barranca, whereas the most contaminated were from Ochomogo. Nevertheless, the quantified populations did not cause significant alteration in quality physicochemical parameters in the samples analyzed. A total of 149 bacterial strains were isolated, 136 (91.3%) Gram positive and 13 (8.7%) Gram negative. The most frequent genera were Staphylococcus (24.0%), Micrococcus (21.9%), Bacillus (18.8%) and Kocuria (11.5%) among Gram positive bacteria and Pseudomonas (7.3%) among Gram negative bacteria. The majority of these genera have been found as fuel contaminants or even as degraders of this kind of products; nevertheless, some species for which their appearance or growth in hydrocarbons have not been described were found with low frequencies. SRB were present in counts up to 10(5) MPN/l in 42.9% of water containing samples (including all from diesel tanks), indicating biocorrosion processes risk in fuel transport and storage systems. From the findings in this study it is recommended to give a frequent maintenance to fuel containers, based on continuous drainage and removal of accumulated water, antimicrobial agent addition and microbial quality monitoring in country's fuels.

Diesel oil removal by Serratia sp. W4-01 immobilized in chitosan-activated carbon beads.

Serratia sp. W4-01 was immobilized in chitosan-activated carbon beads and used for diesel oil removal. The type and concentration of chitosan, activated carbon content, and bead diameter were investigated as factors affecting diesel oil removal. The results showed that 2% (w/v) squid pen chitosan beads modified with 1% activated carbon (w/v) and with a 3-mm diameter had a good spherical shape and strength as well as diesel oil removal capability. The immobilized W4-01 cells removed more than 40% of diesel oil after 7 days when the initial diesel oil concentration was 100 to 400 mg L-1, whereas 29-36% of diesel oil was removed after 14 days when the initial concentration was 800 to 1000 mg L-1. Additionally, the immobilized cells maintained the ability to remove diesel oil over a pH range of 5-11. The addition of a biosurfactant increased the diesel oil removal from 62 to 75%. The reusability tests revealed that the ability of immobilized cells to remove diesel oil was enhanced after reuse, and 50-90% of diesel oil was removed during 2 to 12 reuse cycles. The stability and survival of W4-01 cells was confirmed by scanning electron microscopy and confocal laser scanning microscopy. The results of this study showed the potential use of W4-01 cells immobilized in chitosan-activated carbon beads for future applications in remediating diesel contamination.

Enhancement of oil degradation by co-culture of hydrocarbon degrading and biosurfactant producing bacteria.

In this study the biodegradation of oil by hydrocarbon degrading Pseudomonas putida in the presence of a biosurfactant-producing bacterium was investigated. The co-culture of test organisms exhibited improved degradation capacities, in a reproducible fashion, in aqueous and soil matrix in comparison to the individual bacterium culture. Results indicate that the in situ biosurfactant production not only resulted in increased emulsification of the oil but also change the adhesion of the hydrocarbon to cell surface of other bacterium. The understanding of interactions beetwen microbes may provide opportunities to further enhancement of contaminants biodegradation by making a suitable blend for bioaugmentation.

Production of rhamnolipids and diesel oil degradation by bacteria isolated from soil contaminated by petroleum.

Biosurfactants are microbial secondary metabolites. The most studied are rhamnolipids, which decrease the surface tension and have emulsifying capacity. In this study, the production of biosurfactants, with emphasis on rhamnolipids, and diesel oil degradation by 18 strains of bacteria isolated from waste landfill soil contaminated by petroleum was analyzed. Among the studied bacteria, gram-positive endospore forming rods (39%), gram positive rods without endospores (17%), and gram-negative rods (44%) were found. The following methods were used to test for biosurfactant production: oil spreading, emulsification, and hemolytic activity. All strains showed the ability to disperse the diesel oil, while 77% and 44% of the strains showed hemolysis and emulsification of diesel oil, respectively. Rhamnolipids production was observed in four strains that were classified on the basis of the 16S rRNA sequences as Pseudomonas aeruginosa. Only those strains showed the rhlAB gene involved in rhamnolipids synthesis, and antibacterial activity against Escherichia coli, P. aeruginosa, Staphylococcus aureus, Bacillus cereus, Erwinia carotovora, and Ralstonia solanacearum. The highest production of rhamnolipids was 565.7 mg/L observed in mineral medium containing olive oil (pH 8). With regard to the capacity to degrade diesel oil, it was observed that 7 strains were positive in reduction of the dye 2,6-dichlorophenolindophenol (2,6-DCPIP) while 16 had the gene alkane mono-oxygenase (alkB), and the producers of rhamnolipids were positive in both tests. Several bacterial strains have shown high potential to be explored further for bioremediation purposes due to their simultaneous ability to emulsify, disperse, and degrade diesel oil. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:262-270, 2016.

Deep desulfurization of hydrodesulfurization-treated diesel oil by a facultative thermophilic bacterium Mycobacterium sp. X7B.

The dibenzothiophene (DBT) desulfurization pathway of a facultative thermophilic bacterium Mycobacterium sp. X7B was investigated. Metabolites were identified by gas chromatography-mass spectrometry, and the results showed that 2-hydroxybiphenyl, the end product of the previously reported sulfur-specific pathway (also called 4S pathway), was further converted to 2-methoxybiphenyl. This is the first strain to possess this ability and therefore, an extended 4S pathway was determined. In addition, the DBT-desulfurizing bacterium Mycobacterium sp. X7B was able to grow on DBT derivatives such as 4-methylDBT and 4,6-dimethylDBT. Resting cells could desulfurize diesel oil (total sulfur, 535 ppm) after hydrodesulfurization. GC flame ionization detection and GC atomic emission detection analyses were used to qualitatively evaluate the effect of Mycobacterium sp. X7B treatment on the content of the diesel oil. The total sulfur content of the diesel oil was reduced 86% using resting cell biocatalysts for 24 h at 45 degrees C.

Containment of biogenic sulfide production in continuous up-flow packed-bed bioreactors with nitrate or nitrite.

Produced water from the Coleville oil field in Saskatchewan, Canada was used to inoculate continuous up-flow packed-bed bioreactors. When 7.8 mM sulfate and 25 mM lactate were present in the in-flowing medium, H(2)S production (souring) by sulfate-reducing bacteria (SRB) was prevented by addition of 17.5 mM nitrate or 20 mM nitrite. Changing the sulfate or lactate concentration of the in-flowing medium indicated that the concentrations of nitrate or nitrite required for containment of souring decreased proportionally with a lowered concentration of the electron donor lactate, while the sulfate concentration of the medium had no effect. Microbial communities were dominated by SRB. Nitrate addition did not give rise to changes in community composition, indicating that lactate oxidation and H(2)S removal were caused by the combined action of SRB and nitrate-reducing, sulfide-oxidizing bacteria (NR-SOB). Apparently the nitrite concentrations formed by these NR-SOB did not inhibit the SRB sufficiently to cause community shifts. In contrast, significant community shifts were observed upon direct addition of high concentrations (20 mM) of nitrite. Strains NO3A and NO2B, two newly isolated, nitrate-reducing bacteria (NRB) emerged as major community members. These were found to belong to the epsilon-division of the Proteobacteria, to be most closely related to Campylobacter lari, and to oxidize lactate with nitrate or nitrite as the electron acceptor. Thus the mechanism of microbial H(2)S removal in up-flow packed-bed bioreactors depended on whether nitrate (SRB/NR-SOB) or nitrite (SRB/NR-SOB as well as NRB) was used. However, the amount of nitrate or nitrite needed to completely remove H(2)S was dictated by the electron donor (lactate) concentration, irrespective of mechanism.

Use of mineral nutrients and surface-active substances in a biodegradation process modulation.

The capability of a bacterial population to degrade oil hydrocarbons and naphthalene was found to be markedly enhanced by an optimized P:N ratio as well as by proper application of a surface-active compound. The importance of this optimization procedure was shown by both laboratory and technologically performed experiments.

Occurrence of heterotrophic bacteria and fungi in an aviation fuel handling system and its relationship with fuel fouling.

Clean, dry and contaminant-free fuel is necessary for safe and economical aircraft operation. Microbial growth in aviation fuel handling systems can alter the quality of the product. This paper reports the occurrence of heterotrophic bacteria and fungi in a handling system of jet A-1 aviation turbine fuel. A total of 350 samples were collected during 1990-1996. The aerobic microorganisms in fuel samples were mainly fungi, 85% of samples containing < or = 100 cfu/l (range 0 (< 1 cfu/l) to 2000 cfu/l). The predominant fungi were Cladosporium and Aspergillus. Water was observed mainly in samples extracted from the drainage pipes of two tanks used frequently as intermediate storage tanks. The aerobic heterotrophic microorganisms found in water samples were mostly bacteria, counts varying from 100 to 8.8 x 10(7) cfu/ml, with 85% of samples containing 10(4)-10(7) cfu/ml. There was a preponderance of Pseudomonas spp. Bacterial contaminants belonging to the genus Flavobacterium and Aeromonas were also identified. Sulphate reducing bacteria were detected in 80% of water samples. It was not possible to assign a maximum microbial contamination level above which maintenance is required and it is suggested that analysis of successive samples from the same site are necessary for this purpose. Microbial sludges produced in the laboratory and collected from a contaminated tank bottom were analysed chemically. The data are presented and discussed. Samples collected from the supply pipes of tanks and refueller trucks during the period surveyed always met the standard specifications.

Microbial diversity in long-term water-flooded oil reservoirs with different in situ temperatures in China.

Water-flooded oil reservoirs have specific ecological environments due to continual water injection and oil production and water recycling. Using 16S rRNA gene clone library analysis, the microbial communities present in injected waters and produced waters from four typical water-flooded oil reservoirs with different in situ temperatures of 25 °C, 40 °C, 55 °C and 70 °C were examined. The results obtained showed that the higher the in situ temperatures of the oil reservoirs is, the less the effects of microorganisms in the injected waters on microbial community compositions in the produced waters is. In addition, microbes inhabiting in the produced waters of the four water-flooded oil reservoirs were varied but all dominated by Proteobacteria. Moreover, most of the detected microbes were not identified as indigenous. The objective of this study was to expand the pictures of the microbial ecosystem of water-flooded oil reservoirs.

Oil phytoremediation potential of hypersaline coasts of the Arabian Gulf using rhizosphere technology.

The rhizosphere and phyllosphere of the halophyte Halonemum strobilaceum naturally inhabiting hypersaline coastal areas of the Arabian Gulf harbor up to 8.1 x 10(4)g(-1) and 3 x 10(2)g(-1), respectively, of extremely halophilic oil-utilizing microorganisms. Such organisms were 14- to 38-fold more frequent in the rhizosphere than in the plant-free soil. Frequent genera in the rhizosphere were affiliated to the archaea Halobacterium sp. and Halococcus sp., the firmicute Brevibacillus borstenlensis, and the proteobacteria Pseudoalteromonas ruthenica and Halomonas sinaensis. The phyllospheric microflora consisted of the dimorphic yeast Candida utilis and the two proteobacteria Ochrobactrum sp. and Desulfovibrio sp. Individual strains grew on a range of pure aliphatic and aromatic hydrocarbons, as sole sources of carbon and energy. All the strains, except C. utilis which could not tolerate salinities >2M NaCl, grew also in media with salinities ranging between 1 and 4M NaCl, with optimum growth between 1 and 2M NaCl. With the exception of the two archaeal genera, all isolates could grow in a nitrogen-free medium. The total rhizospheric and phyllospheric microbial consortia could attenuate crude oil in complete (nitrogen-containing) medium, but also equally well in a nitrogen-free medium. It was concluded that H. strobilaceum could be a valuable halophyte for phytoremediation of oil-polluted hypersaline environments via rhizosphere technology.

Microbial community structure of a heavy fuel oil-degrading marine consortium: linking microbial dynamics with polycyclic aromatic hydrocarbon utilization.

A marine microbial consortium obtained from a beach contaminated by the Prestige oil spill proved highly efficient in removing the different hydrocarbon families present in this heavy fuel oil. Seawater cultures showed a complete removal of all the linear and branched alkanes, an extensive attack on three to five-ring polycyclic aromatic hydrocarbons [PAHs; including anthracene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, and benzo(a)pyrene] (30-100%), and a considerable depletion of their alkyl derivatives. Community dynamics analysis revealed that Alcanivorax species, known alkane degraders, predominated in the initial stages. This was followed by an increase in Alphaproteobacteria (i.e. Maricaulis, Roseovarius), which coincided with the depletion of low molecular PAHs. Finally, these were succeeded by Gammaproteobacteria (mainly Marinobacter and Methylophaga), which were involved in the degradation of the high molecular-weight PAHs. The role of these populations in the removal of the specific components was confirmed by the analysis of subcultures established using the aliphatic or the aromatic fraction of the fuel oil, or single PAHs, as carbon sources. The genus Marinobacter seemed to play a major role in the degradation of a variety of hydrocarbons, as several members of this group were isolated from the different enrichment cultures and grew on plates with hexadecane or single PAHs as sole carbon sources.