Effect of carbamide peroxide treatment on the ion release of different dental restorative materials.

BACKGROUND: To predict the long-term performance of restorative materials in the oral environment, it is important to evaluate their resistance to chemical and mechanical degradation and to know the toxic potential of the type and amount of ions eluted from the filling material. In this study, home bleaching was applied to dental materials with different contents and it was aimed to determine the type and amount of ions released from these materials. METHODS: In this study, amalgam, posterior composite resin, anterior composite resin, bulk fill composite resin, indirect composite resin, hybrid ceramic and all-ceramic were used as restorative materials. 10 specimens of each material were prepared according to the manufacturer's instructions. Each material group was divided into two subgroups as the bleached group and the control group. After bleaching, all specimens were stored in 1 ml of 75% ethanol/water solution. Solutions were renewed after 1, 14 and 28 days. The type and amount of ions released from the materials were determined using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Data were analyzed using the Friedman, Wilcoxon Signed Ranks, and Mann-Whitney U tests (α = 0.05). RESULTS: It was determined that the amount of ions release from the restorative materials decreased over time (p < 0.05). According to the results of the Mann-Whitney U test, there was no difference between the bleaching and control groups in most of the restorative materials (p > 0.05). CONCLUSION: Within the limits of this study, home bleaching system does not have a significant effect on ion release from restorative materials.

Mercury, silver and selenium in serum before and after removal of amalgam restorations: results from a prospective cohort study in Norway.

OBJECTIVE: A prospective cohort study on changes of health complaints after removal of amalgam restorations was carried out at the request of the Norwegian Directorate of Health. The aim was to provide and evaluate experimental treatment to patients with health complaints attributed to dental amalgam fillings. METHODS: Patients (n = 32) with medically unexplained physical symptoms (MUPS), which were attributed to dental amalgam restorations had all their amalgam restorations removed and replaced with other dental restorative materials. Samples of blood were collected before and 1 year after removal of the fillings, and concentration of inorganic mercury (I-Hg), methylmercury (MeHg), silver (Ag) and selenium (Se) in serum was determined by inductively coupled plasma-sector field mass spectrometry. The comparison groups (one with MUPS but without attribution to amalgam [n = 28] and one group of healthy individuals [n = 19]) received no treatment. The participants responded to questionnaires at baseline and at follow-up after 1 and 5 years. RESULTS: Concentration of I-Hg and Ag in serum decreased significantly after removal of all amalgam restorations. Concentration of MeHg and Se in serum were not changed. Intensity of health complaints was significantly reduced after amalgam removal, but there were no statistically significant correlations between exposure indicators and health complaints. CONCLUSIONS: Removal of all amalgam restorations is followed by a decrease of concentration of I-Hg and Ag in serum. The results support the hypothesis that exposure to amalgam fillings causes an increase of the daily dose of both I-Hg and Ag. Even though intensity of health complaints decreased after removal of all amalgam restorations there was no clear evidence of a direct relationship between exposure and health complaints. Trial registration: The project is registered at Clinicaltrials.gov (NCT01682278).

Bacteria in the cavity-restoration interface after varying periods of clinical service - SEM description of distribution and 16S rRNA gene sequence identification of isolates.

OBJECTIVES: To use extracted human teeth with amalgam (n = 26) or GIC (n = 3) restorations in service up to 20 years to evaluate microbiota at the cavity/restoration interface by SEM or culture. MATERIALS AND METHODS: Extracted teeth with intracoronal restorations (n = 20) of known history (2-20 years) were fixed, split, and prepared for SEM to ascertain the pattern and structure of bacterial aggregates on cavity and restoration surfaces. Another 9 teeth were anaerobically decontaminated, split and sampled (cavity/restorations), and cultured (anaerobically, aerobically); recovered isolates were identified by 16S rRNA gene sequencing. RESULTS: SEM showed rods, cocci, and filaments in 11/20 teeth (55%) on cavity and corresponding restoration surfaces; 4/20 (20%) on neither surface; 1/20 (5%) on just cavity; and 4/20 (20%) on just restoration. Microbial growth extended from marginal openings into the deeper interfacial microspace to varying extents but was not always evident. Restoration size or age did not predict bacterial presence. Bacteria-free surfaces (cavity/amalgam) showed possible calcification. Cultivation yielded 160 isolates, mainly Gram-positive (86%) and facultative (81%); and morphotypes of rods (43%), cocci (36%), and cocco-bacilli (18%) belonging to Actinobacteria (45%) and Firmicutes (50%). The most frequent genera were Staphylococcus, Streptococcus, Actinomyces, and Lactobacillus. Biofilms on cavity and restoration appeared independent of each other. CONCLUSIONS: Cavity and amalgam surfaces were independently colonised and some not. The penetration of microbiota into marginal gaps varied; resembled root caries and was dominated by Gram-positive species. CLINICAL RELEVANCE: Marginal gaps around restorations are unavoidable but are not always colonised by bacteria after long-term clinical service. Calcification of biofilms in the restorative interface may prevent further colonisation. The viable microbiota in the restorative interface resembled root caries and may be subject to ecological fluxes of activity and arrest and therefore preventative management.

The cytotoxic and oxidative effects of restorative materials in cultured human gingival fibroblasts.

The aim of this study was to evaluate the cytotoxic and oxidative effects of the most commonly used dental restorative materials on human gingival fibroblast cells (HGFCs). HGFCs were obtained from healthy individuals. The tested restorative materials were a microhybrid resin based composite, a compomer resin, a glass ionomer cement, and an amalgam alloy. One hundred eight cylindirical samples, 10 mm in diameter and 2 mm in height, were prepared according to ISO 10993-12:2002 specifications (n = 9 in the tested subgroups). Freshly prepared and aged samples in artificial saliva at 37 °C (7 and 21 d) were placed into well plates and incubated. Wells without dental materials were constituted as the control group. After 72 h incubation period, cytotoxicity was determined using the neutral red (NR) assay. Oxidative alterations were assessed using total antioxidant capacity (TAC) and total oxidant status (TOS) assay kits. Data were analyzed using the ANOVA and LSD post hoc tests. All tested materials led to significant decreases in the cell viability rates (33-73%) compared to the control group. Glass ionomer and resin composite were found to be more cytotoxic than amalgam alloy and compomer. The highest TAC level was observed in glass ionomer after seven-day aging and these changes prevented an increase in TOS levels. Increases in TAC levels after seven-day aging in all groups exhibited significant differences with freshly prepared samples (p < 0.05). In all material groups, TOS levels of freshly prepared samples differed statistically and significantly from samples aged for 7 and 21 d (p < 0.05). The data obtained suggested that all the tested materials exhibited cytotoxic and pro-oxidant features. Freshly prepared samples caused higher TOS levels. However, oxidant status induced by materials decreased over time.

Bacterial Adhesion of Streptococcus mutans to Dental Material Surfaces.

The aim of this study was to investigate and understand bacterial adhesion to different dental material surfaces like amalgam, Chromasit, an Co-Cr alloy, an IPS InLine ceramic, yttrium stabilized tetragonal polycrystalline zirconia (TPZ), a resin-based composite, an Au-Pt alloy, and a tooth. For all materials, the surface roughness was assessed by profilometry, the surface hydrophobicity was determined by tensiometry, and the zeta potential was measured by electrokinetic phenomena. The arithmetic average roughness was the lowest for the TPZ ceramic (Ra = 0.23 µm ± 0.02 µm), while the highest value was observed for the Au-Pt alloy (Ra = 0.356 µm ± 0.075 µm). The hydrophobicity was the lowest on the TPZ ceramic and the highest on the Co-Cr alloy. All measured streaming potentials were negative. The most important cause of tooth caries is the bacterium Streptococcus mutans, which was chosen for this study. The bacterial adhesion to all material surfaces was determined by scanning electron microscopy. We showed that the lowest bacterial extent was on the amalgam, whereas the greatest extent was on tooth surfaces. In general, measurements showed that surface properties like roughness, hydrophobicity and charge have a significant influence on bacterial adhesion extent. Therefore, dental material development should focus on improving surface characteristics to reduce the risk of secondary caries.

An analysis of the timing and materials associated with pulp disease following restorative dental treatment.

AIM: To assess whether the timing of pulp disease after tooth restoration was associated with type of restorative dental material used, extent of the restoration or tooth type. METHODOLOGY: A comprehensive search and analysis of data using the Titanium Oral Health Management software program at The Oral Health Centre of Western Australia were performed to correlate procedural codes for teeth that had restorations placed and subsequently developed pulp disease requiring endodontic treatment or extraction from 1st January 2009 to 31st December 2013. Manual analysis of paper and/or electronic patient record cards was also performed. Data collected included restoration type, restored tooth surfaces, tooth type and the dates of restoration and subsequent endodontic intervention or extraction. RESULTS: Of 330 teeth that met the inclusion criteria, 84 (26%) had composite resin restorations, 80 (24%) had amalgams, 119 (36%) had glass-ionomer cement (GICs), and 47 (14%) had crowns. The average time between restoration and further intervention was 330 days with a range from 3 to 1775 days (approximately 5 years). Teeth restored with crowns or five-surface restorations were significantly more likely to require earlier intervention than other restorations. Premolar and anterior teeth were also more likely to require earlier intervention. CONCLUSIONS: Teeth that developed pulp disease requiring further intervention that were restored with crowns and five-surface GIC developed the disease sooner than teeth that were restored with amalgam or composite. In teeth with five-surface restorations that developed pulp disease requiring further intervention, premolar and anterior teeth developed the pulp disease sooner than molars.

Increased mercury emissions from modern dental amalgams.

All types of dental amalgams contain mercury, which partly is emitted as mercury vapor. All types of dental amalgams corrode after being placed in the oral cavity. Modern high copper amalgams exhibit two new traits of increased instability. Firstly, when subjected to wear/polishing, droplets rich in mercury are formed on the surface, showing that mercury is not being strongly bonded to the base or alloy metals. Secondly, high copper amalgams emit substantially larger amounts of mercury vapor than the low copper amalgams used before the 1970s. High copper amalgams has been developed with focus on mechanical strength and corrosion resistance, but has been sub-optimized in other aspects, resulting in increased instability and higher emission of mercury vapor. This has not been presented to policy makers and scientists. Both low and high copper amalgams undergo a transformation process for several years after placement, resulting in a substantial reduction in mercury content, but there exist no limit for maximum allowed emission of mercury from dental amalgams. These modern high copper amalgams are nowadays totally dominating the European, US and other markets, resulting in significant emissions of mercury, not considered when judging their suitability for dental restoration.

Characterisation of secondary metal-bearing phases in used dental amalgam and assessment of gastric solubility.

Detailed SEM/EDS investigation of used dental amalgams was carried out in order to characterise morphology and chemical composition of secondary metal-bearing phases resulting from long-term exposure of dental amalgam to oral environment, and assess their solubility in gastric environment. The investigation revealed numerous secondary phases, represented by compositionally and morphologically complex Hg-, Cu-, Sn-, Ag-, Zn-bearing sulphides and oxides/hydroxides, while sulphates and phosphates are scarce. Secondary metal-bearing phases mostly occur at the amalgam/tooth interface; however, some phases were found only on the occlusal surfaces of amalgam. Secondary phases mostly form porous aggregates of minute crystallites and micro- or nanocrystalline crusts. In oral environment, these phases are mostly stable and represent trapping media for dissolved potentially toxic metals released during amalgam corrosion. Simplified PHREEQC calculations of solubility of secondary metal-bearing phases in aqueous environment under conditions similar to those in gastric environment showed that secondary phases are more soluble in gastric environment than in oral solutions, which is mostly due to their forms of occurrence. Secondary phases in gastric environment thus act as secondary sources of potentially toxic metals, particularly Sn, Zn and also Cu, which are released both under reducing and oxidising conditions especially in acidic environment. Only very small amounts of Hg are potentially released and should not represent serious threat. Secondary phases that contribute the most to bioaccessibility of these metals are Sn hydroxychlorides, Sn oxides/hydroxides, Sn sulphates/hydroxysulphates, Sn oxides, Zn sulphides and Cu sulphides (Cu2S).

Influence of Hand Instrumentation and Ultrasonic Scaling on the Microleakage of various Cervical Restorations: An in vitro Study.

INTRODUCTION: In cervical lesions, various restorative materials can be inserted, which can be affected by the application of periodontal scalers. This study evaluated and compared the marginal seal of class V glass ionomer, composite resin, and amalgam restorations after subjecting them to hand instrumentation and ultrasonic scaling. MATERIALS AND METHODS: In this experimental study, 30 sound human first premolars were selected. In each tooth, buccal and lingual cavities (4 mm mesiodistal width, 3 mm occlusogingival height, and 2 mm depth) were made. The teeth were randomly assigned to three groups of 10 teeth: (1) Glass ionomer group, (2) composite group, and (3) amalgam group. Teeth were subjected to thermocycling procedure for 1,000 cycles between 5 and 55°C water baths and a 1-minute dwell time. Then, each group was randomly subdivided: (1) Margins of 30 restorations were exposed to hand instrumentation procedures by applying 10 working strokes, (2) margins of 30 restorations were exposed to a periodontal tip mounted on a piezoelectric ultrasonic handpiece working at 25 kHz for 10 seconds. The specimens were serially sectioned mesiodistally. Each section was examined under a stereomicroscope. The extent of microleakage was ranked using a 0 to 4 scale at both occlusal and cervical margins of the restorations. Data were analyzed initially using the Kruskal-Wallis test, followed by multiple comparisons using the Mann-Whitney and Wilcoxon test. RESULTS: The type of restorative material had a significant influence on dye penetration, whether in the enamel margin or in the dentinal margin (p < 0.001). The microleakage of glass ionomer group was the highest. No statistical differences were found in dye penetration between scaling groups (hand instrumentation and ultrasonic scaling) (p > 0.05). CONCLUSION: Type of restorative material had a significant influence on microleakage. No statistical differences were found in dye penetration between scaling groups. CLINICAL SIGNIFICANCE: The microleakage of glass ionomer restoration is greater than amalgam and composite restorations after subjecting them to hand instrumentation and ultrasonic scaling.

Inhalation of mercury vapor can cause the toxic effects on rat kidney.

Dental amalgam has been used in dentistry as a filling material. The filler comprises mercury (Hg). It is considered one of the most important and widespread environmental pollutants, which poses a serious potential threat for the humans and animals. However, mercury deposition affects the nervous, cardiovascular, pulmonary, gastrointestinal, and especially renal systems. In most animals' species and humans, the kidney is one of the main sites of deposition of mercury and target organ for its toxicity. In this study, the effects of mercury intake on kidney in rats were searched. For the this purpose; we used 24 adult female Wistar albino rats (200 g in weight) obtained from Experimental Research and Application Center of Atatürk University with ethical approval. Besides, they were placed into a specially designed glass cage. Along this experiment for 45 days, subjects were exposed to (1 mg/m(3)/day) mercury vapor. However, no application was used for the control subjects. At the end of the experiment, kidney samples were obtained from all subjects and processed for routine light microscopic level and stereological aspect were assessed. Finally, according to our results, mercury affects the histological features of the kidney. That means, the severe effects of mercury has been shown using stereological approach, which is one of the ideal quantitative methods in the current literature. In this study, it was detected that chronic exposure to mercury vapor may lead to renal damage and diseases in an experimental rat model.

Restorative material and loading type influence on the biomechanical behavior of wedge shaped cervical lesions.

OBJECTIVES: To evaluate the influence of restorative materials used on the rehabilitation of MOD cavities and loading type, on biomechanical behavior of wedge-shaped (WS) lesions in endodontically treated maxillary premolars. The investigation was conducted by 3D finite element analysis (FEA) and strain gauge test. MATERIALS AND METHODS: Six models were generated, with MOD cavities and endodontic treatment: A (MOD amalgam restoration), R (MOD composite restoration), AL (A + cervical lesion (L)), RL, ALR (A + cervical lesion restored with composite (LR)), and RLR. Each model underwent two compressive loading (100N): axial and oblique-45° angle to the long axis on the buccal cusp. The models were analyzed by von Mises criteria. For strain gauge test, 14 standardized maxillary premolars were treated according to the groups described for FEA. Two strain gauges were bonded on each sample submitted to compressive loading in a mechanical testing machine. RESULTS: A presented higher stress concentration and strain values than R. Oblique loading promoted highest stress concentration and strain rates for all groups. ALR and RLR presented similar stress-strain distribution pattern when compared to A and R. CONCLUSION: The interaction between MOD cavity restored with amalgam and oblique loading propitiated the highest stress concentration and strain values on cervical region and WS lesion. CLINICAL RELEVANCE: The MOD cavity restored with composite resin is a better option than amalgam to improve the biomechanical behavior of wedge-shaped lesion, avoiding dental failure. In addition, the occlusal interferences must be removed, allowing homogeneous contact distribution and preventing WS lesion progression.

The effects of overhang amalgam restoration on levels of cytokines, gingival crevicular fluid volume and some periodontal parameters.

PURPOSE: To evaluate clinical periodontal findings and GCF levels of tumor necrosis factor alpha (TNF-α), interleukin 6 (IL-6) and interleukin 8 (IL-8) in patients with overhang amalgam restorations before and after overhang restoration removal. METHODS: 22 volunteer subjects (age range: 22-42 years old) with 22 overhang Class II amalgam restorations were selected. GCF samples were obtained from adjacent and contralateral teeth for IL-6, IL-8 and TNF-α measurements and analyzed using enzyme-linked immunosorbent assay (ELISA) kits. The amalgam overhangs were removed and the readings were repeated at the end of 1 week. Clinical periodontal assessments, including gingival index (GI) and plaque index (PI) were performed at baseline and after 1 week. Data were analyzed using the paired t-test and independent sample t-test at a significance level of 0.05. Correlations were investigated using Pearson correlation analysis. RESULTS: A significant reduction in GI and PI was observed after removal of the overhanging restoration on Day 7. (P< 0.05) However, there was no significant difference between IL-6 (P= 0.857), IL-8 (P= 0.579) and TNF-α (P= 0.958) levels before and after overhang restoration removal. There were no significant correlations between laboratory findings and clinical parameters. CLINICAL SIGNIFICANCE: Dental restorations may produce periodontal disease and may alter tooth form, surface integrity, relationship with the periodontium and adjacent teeth. The marginal edge located in the gingival sulcus is likely the cause of the inflammatory reaction. This study showed significant improvement in clinical periodontal parameters after removing the overhangs of restorations.

A Retrospective Study of the 3-Year Survival Rate of Resin-Modified Glass-Ionomer Cement Class II Restorations in Primary Molars.

OBJECTIVE: To determine the three-year survival rate of Class II resin-modified glass-ionomer cement (RMGIC), Vitremer, restorations in primary molars and to compare these results with measurements of survival of Class II restorations of standard restorative materials. STUDY DESIGN: Data on Class II restorations placed in primary molars during a six-year period were collected through a chart review and radiographic evaluation in the office of a board-certified pediatric dentist. A radiograph showing that the restoration was intact was required at least 3 years after placement to qualify as successful. If no radiograph existed, the restoration was excluded. If the restoration was not found to be intact radiographically or was charted as having been replaced before three years it was recorded as a failure. The results of this study were then compared to other standard restorative materials using normalized annual failure rates. RESULTS: Of the 1,231 Class II resinmodified glass-ionomer cement restorations placed over six years 427 met the inclusion criteria. There was a 97.42% survival rate for a 3-year period equivalent to an annual failure rate of 0.86%. CONCLUSIONS: A novel approach comparing materials showed that in this study Vitremer compared very favorably to previously published success rates of other standard restorative materials (amalgam, composite, stainless steel crown, compomer) and other RMGIC studies.

British Society of Prosthodontics Debate on the Implications of the Minamata Convention on Mercury to Dental Amalgam--Should our Patients be Worried?.

In 2013, the Minamata Convention on Mercury called for a global phase-down of amalgam use, with a view to reduce environmental mercury pollution. This will significantly impact UK dentistry, given the still extensive use of amalgam in U.K. general dental practice. However, until now there has been little national discussion or debate. In Spring 2015, The British Society of Prosthodontics dedicated a significant part of its Annual Conference to debating the implications of this issue. Clinical case examples were discussed with audience interaction and voting facilitated using innovative Audience Response System Technology. A remarkable range of concerns and opinions were given. The debate elicited specific concerns amongst clinicians regarding the suitability of mercury-free alternatives to amalgam; particularly where cavities are large and extend beneath the gingival anatomy. There are also anecdotal reports of Dental Foundation (DF) dentists not being adequately taught the use of dental amalgam in undergraduate dental schools. CPD/CLINICAL RELEVANCE: Many clinicians, especially those treating patients for whom moisture control is challenging, feel that amalgam should remain available for clinicians to choose in certain clinical circumstances for the restoration of posterior teeth, even in the event of a complete phase-down.

Finite element analysis of thermal stress distribution in different restorative materials used in class V cavities.

PURPOSE: Cervical lesions are restored with class V preparation. The aim of this study was to use a three-dimensional finite element method to carry out a thermal analysis of the temperature and stress distributions of three different restorative materials used for class V cavities of maxillary molar teeth. MATERIALS AND METHODS: A maxillary left first molar tooth was modeled and a class V cavity was prepared on the cervical 1/3 of the buccal surface. This cavity was restored with three different materials (Group I: Resin composite, Group II: Glass ionomer cement, and Group III: Amalgam). Loads of 400 N were applied at an angle of 90° to the longitudinal axis of the tooth on the restorative material at 5 and 55°C temperatures. Von Mises and thermal stress distributions were evaluated. RESULTS: In all groups, the von Mises stress values increased with temperature. The highest von Mises stress distribution was observed at 55°C in Group II (144.53 MPa). The lowest von Mises stress distribution was observed at 5°C in Group III (70.81 MPa). CONCLUSION: Amalgam is the most suitable restorative material for class V restorations because of minimal stress distribution.

Changes in Occlusal Caries Lesion Management in France from 2002 to 2012: A Persistent Gap between Evidence and Clinical Practice.

A survey conducted in 2002 among French general dental practitioners (GPs) showed variations between treatment decisions and a tendency towards early restorative intervention for caries. The aims of the present questionnaire survey were to investigate, among a random sample of 2,000 French GPs, the management decisions for occlusal lesions in 2012 and to compare the results to those obtained in 2002. The response rate was 41.9%. The majority of the respondents (60.7%) would postpone their restorative decisions until the lesion was in the dentin, based on clinical and radiographic examinations. Almost 68% of the respondents suggested that the cavity preparation should be limited to the lesion (vs. a preparation extending to the occlusal fissure), and 81.6% chose composite as restorative material for the earliest lesion requiring restoration in a 20-year-old patient with his/her caries risk factors under control. Statistical analysis (χ(2) and logistic regression) showed that the management decisions were influenced by certain demographic characteristics (gender, clinical experience and participation in cariology courses). When comparing the 2002 and 2012 responses, it appears that even if French GPs still tend to intervene surgically for occlusal lesions, which could benefit from noninvasive care such as therapeutic sealants, the restorative threshold has been delayed to later stages of carious progression (p < 0.0001). Moreover, the 2012 respondents were less likely to open the fissure system than the 2002 respondents (p = 0.032), and less amalgam restorations would have been placed in 2012 (p < 0.0001). Furthermore, the results showed that the variability observed in 2002 toward caries management decisions was persisting in 2012.

Are resin composites suitable replacements for amalgam? A study of two-body wear.

OBJECTIVES: Wear resistance is an important property of the dental materials, particularly for large restorations in the posterior regions and for the patients suffering from parafunctional activities. Additionally, the wear resistance of flowable composite resin materials is a clinical concern, although they are popular among dentists because of their easy handling. The aims of the present study were to evaluate the wear resistance of nine composite resins both condensable (G-aenial posterior, Venus, GrandioSO, Tetric EvoCeram, Ceram X duo, Filtek Supreme XTE) and new-generation flowable resin composites (G-aenial Universal Flo, GrandioSO Flow and GrandioSO Heavy Flow) and to compare these results with amalgam. MATERIALS AND METHOD: Eight specimens of each material were subjected to two-body wear tests, using a chewing simulator. The wear region of each material was examined under profilometer, measuring the vertical loss (µm) and the volume loss (mm(3)) of the materials. Additionally, SEM analysis was performed to assess surfaces irregularities. RESULTS: The results showed significant difference of the vertical loss and the volume loss of the examined materials (p < 0.001). Although amalgam had the best wear resistance, two condensable resin composites (GrandioSO, Ceram X duo) and all flowable materials had no significant difference with amalgam. GrandioSO had the highest wear resistance and Filtek Supreme XTE the lowest wear resistance. CONCLUSION: The majority of resin composites had good wear resistance and similar to amalgam. CLINICAL RELEVANCE: Based on the in vitro measurements of two-body wear resistance, the new resin composites could replace amalgam for restorations placed in occlusal stress-bearing regions. New-generation flowable resin materials may also be used in occlusal contact restorations.

In situ bacterial accumulation on dental restorative materials. CLSM/COMSTAT analysis.

PURPOSE: To evaluate the influence of different restorative materials on the biofilm structure accumulated in situ. METHODS: 15 discs of each material (ceramic; resin composite; resin-modified and conventional glass-ionomers; amalgam) were adapted to palatal devices in order to accumulate biofilm in situ, under a cariogenic challenge (20% sucrose solution, 10x/day). After 7 days, the specimens were carefully removed and visualized by confocal laser scanning microscopy (CLSM). The images were analyzed qualitatively (descriptive analysis about cell viability and architecture) and quantitatively using COMSTAT software (area, bio-volume, mean thickness, maximum thickness and roughness coefficient of the biofilm). The statistical analysis was performed by using the Kolmogorov-Smirnov and Kruskal-Wallis tests (P ≤ 5%). RESULTS: The medians of the biofilm parameters analyzed showed no statistical difference regarding different materials. However, qualitatively, glass-ionomer cements and amalgam showed visually a prevalence of non-viable cells forming small clusters distributed by the biofilm, and voids were presented in smaller proportion in the biofilm volume compared to composite and ceramic.

Is apical periodontitis in root filled teeth associated with the type of restoration?

OBJECTIVE: To study the association between type of restoration and apical periodontitis (AP) in root filled teeth. MATERIALS AND METHODS: The present study used data from surveys conducted in 1983, 1993 and 2003. In 1983, 130 randomly selected subjects aged 3-80 years in the city of Jönköping, Sweden, were invited for a clinical and radiological examination. The study was repeated in 1993 and 2003. New participants were, thus, recruited with the same sampling criteria and sample size in the same geographical area in 1993 and 2003, respectively. In the present study, only dentate individuals aged 20-70 years with ≥1 root filled tooth were included, yielding a sample of 788 subjects with 2634 root filled teeth. Apical periodontitis on the tooth level was the dependent variable. Periapical status was assessed according to Periapical Index (PAI). Independent variables were root filling quality, recurrent caries, type of restoration, number of teeth with apical periodontitis, age and gender. Root fillings appearing homogenous and ending within 2 mm from radiographic apex were regarded as adequate, otherwise inadequate. All radiographs were re-studied by one observer regarding periapical status and root filling quality. Risk was analyzed by means of a GEE model. RESULTS: Type of restoration, root filling quality, number of teeth with apical periodontitis within the individual and age were found to be predictors of AP in root filled teeth. Presence of recurrent caries and gender were not found to be associated with AP. CONCLUSIONS: According to the present study, root filling quality and type of restoration may be predictive of AP in root filled teeth.

Effect of bleaching on mercury release from amalgam fillings and antioxidant enzyme activities: a pilot study.

OBJECTIVE: The aim of this pilot clinical study was to determine the mercury release from amalgam fillings and antioxidant enzyme activities (Superoxide Dismutase [SOD] and Catalase[CAT] ) in body fluids after exposure to two different vital tooth bleaching systems. MATERIAL AND METHODS: Twenty eight subjects with an average age of 25.6 years (18-41) having at least two but not more than four Class II amalgam fillings on each quadrant arch in the mouth participated in the study. Baseline concentrations of mercury levels in whole blood, urine, and saliva were measured by a Vapor Generation Accessory connected to an Atomic Absorption Spectrometer. Erythrocyte enzymes, SOD, and CAT activities in blood were determined kinetically. Subjects were randomly assigned to two groups of 14 volunteers. Group 1 was treated with an at-home bleaching system (Opalescence PF 35% Carbamide Peroxide, Ultradent), and Group 2 was treated with a chemically activated office bleaching system (Opalescence Xtra Boost 38% Hydrogen Peroxide, Ultradent) according to the manufacturer's recommendations. Twenty-four hours after bleaching treatments, concentrations of mercury and enzymes were remeasured. RESULTS: There were no significant differences on mercury levels in blood, urine, and saliva before and after bleaching treatments (p > 0.05). No differences were also found in the level of antioxidant enzyme activities (SOD and CAT) before and after treatments (p > 0.05). Mercury release did not affect the enzyme activities (p > 0.05). CONCLUSION: Bleaching treatments either office or home did not affect the amount of mercury released from amalgam fillings in blood, urine, and saliva and the antioxidant-enzyme activities in blood. CLINICAL SIGNIFICANCE: Bleaching treatments with the systems tested in this pilot study have no deleterious effect on the mercury release from amalgam fillings and antioxidant enzymes in body fluids.