Satellite isoprene retrievals constrain emissions and atmospheric oxidation.

Isoprene is the dominant non-methane organic compound emitted to the atmosphere1-3. It drives ozone and aerosol production, modulates atmospheric oxidation and interacts with the global nitrogen cycle4-8. Isoprene emissions are highly uncertain1,9, as is the nonlinear chemistry coupling isoprene and the hydroxyl radical, OH-its primary sink10-13. Here we present global isoprene measurements taken from space using the Cross-track Infrared Sounder. Together with observations of formaldehyde, an isoprene oxidation product, these measurements provide constraints on isoprene emissions and atmospheric oxidation. We find that the isoprene-formaldehyde relationships measured from space are broadly consistent with the current understanding of isoprene-OH chemistry, with no indication of missing OH recycling at low nitrogen oxide concentrations. We analyse these datasets over four global isoprene hotspots in relation to model predictions, and present a quantification of isoprene emissions based directly on satellite measurements of isoprene itself. A major discrepancy emerges over Amazonia, where current underestimates of natural nitrogen oxide emissions bias modelled OH and hence isoprene. Over southern Africa, we find that a prominent isoprene hotspot is missing from bottom-up predictions. A multi-year analysis sheds light on interannual isoprene variability, and suggests the influence of the El Niño/Southern Oscillation.

Sustainable strategies towards better utilization of synthetic polymers.

The abstract provides an overview of a study focused on analyzing diverse strategies to achieve sustainable utilization of synthetic polymers through effective waste management. The escalating global consumption of synthetic polymers has precipitated a concerning increase in plastic waste and environmental degradation. To address this challenge, novel materials with specified application goals, such as engineered plastic, have been developed and are intended for recycling and reuse. Despite the reuse and recycling, when plastic gets disposed into the environment, the degradation properties of plastics render a direct disposal hazard, posing a significant environmental threat. To mitigate these issues, the concept of replacing specific monomers of engineered synthetic plastics with bio-alternatives or blending them with other polymers to enhance sustainability and environmental compatibility has emerged. In this study, Acrylonitrile Butadiene Styrene (ABS) plastic is the focal material, and three distinct investigations were conducted. First, replacing ABS plastic's butadiene monomer with natural rubber was explored for its properties and environmental impact. Second, ABS plastic was blended with virgin, recycled, and bio-alternatives of PET (polyethylene terephthalate) and PVC (polyvinyl chloride) polymers. Lastly, recycled ABS blended with recycled PET and PVC was analyzed for mechanical properties. Comparative assessments of these blends were made based on mechanical properties, carbon emissions, and cost-effectiveness. The study determined that the r-ABS/r-PVC (recycled) blend exhibited the most favorable characteristics for practical application.

Prediction of Acrylonitrile-Butadiene-Styrene Mechanical Properties through Compressed-Sensing Techniques.

One of the challenges in the plastic industry is the cost and time spent on the characterization of different grades of polymers. Compressed sensing is a data reconstruction method that combines linear algebra with optimization schemes to retrieve a signal from a limited set of measurements of that signal. Using a data set of signal examples, a tailored basis can be constructed, allowing for the optimization of the measurements that should be conducted to provide the highest and most robust signal reconstruction accuracy. In this work, compressed sensing was used to predict the values of numerous properties based on measurements for a small subset of those properties. A data set of 21 fully characterized acrylonitrile-butadiene-styrene samples was used to construct a tailored basis to determine the minimal subset of properties to measure to achieve high reconstruction accuracy for the remaining nonmeasured properties. The analysis showed that using only six measured properties, an average reconstruction error of less than 5% can be achieved. In addition, by increasing the number of measured properties to nine, an average error of less than 3% was achieved. Compressed sensing enables experts in academia and industry to substantially reduce the number of properties that must be measured to fully and accurately characterize plastics, ultimately saving both costs and time. In future work, the method should be expanded to optimize not only individual properties but also entire tests used to simultaneously measure multiple properties. Furthermore, this approach can also be applied to recycled materials, of which the properties are more difficult to predict.

Monomer-Recyclable Polyester from CO2 and 1,3-Butadiene.

Synthesis of monomer-recyclable polyesters solely from CO2 and bulk olefins holds great potential in significantly reducing CO2 emissions and addressing the issue of plastic pollution. Due to the kinetic disadvantage of direct copolymerization of CO2 and bulk olefins compared to homopolymerization of bulk olefins, considerable research attention has been devoted to synthesis of polyester via the ring-opening polymerization (ROP) of a six-membered disubstituted lactone intermediate, 1,2-ethylidene-6-vinyl-tetrahydro-2H-pyran-2-one (𝜹-L), obtained from telomerization of CO2 and 1,3-butadiene. However, the conjugate olefin on the six-membered ring of 𝜹-L leads to serious Michael addition side reactions. Thus, the selective ROP of 𝜹-L, which can precisely control the repeating unit for the production of polyesters potentially amenable to efficient monomer recycling, remains an unresolved challenge. Herein, the first example of selective ROP of 𝜹-L is reported using a combination of organobase and N,N'-Bis[3,5-bis(trifluoromethyl)phenyl]urea as the catalytic system. Systematic modifications of the substituent of the urea show that the presence of electron-deficient 3,5-bis(trifluoromethyl)-phenyl groups is the key to the extraordinary selectivity of ring opening over Michael addition. Efficient monomer recovery of oligo(𝜹-L) is also achieved under mild catalytic conditions.

Nitriles as Functionalization and Coupling Agents for Polyolefins Obtained by Coordinative Chain Transfer Polymerization.

Coordinative chain transfer polymerization (CCTP) of ethylene and its copolymerization with 1,3-butadiene is conducted in toluene at 80 °C using a combination of {(Me2Si(C13H8)2)Nd(µ-BH4)[(µ-BH4)Li(THF)]}2 (1) metal complex and various organomagnesium compounds used as chain transfer agents including n-butyl-n-octyl-magnesium (BOMAG), n-butyl-mesityl-magnesium (n-BuMgMes), n-butyl-magnesium chloride (n-BuMgCl), n-pentyl-magnesium bromide (n-C5H11MgBr), pentanediyl-1,5-di(magnesium bromide) (PDMB) and isobutyl-magnesium chloride (i-BuMgCl). Kinetics and performance in terms of control of the (co)polymerization are comparatively discussed particularly considering the presence of ether and the nature of the organomagnesium compounds employed. Taking advantage of the well-known reactivity between nitrile and molecular organomagnesium compounds, the functionalization of the chains is further carried out by deactivation of the polymerization medium with benzonitrile or methoxybenzonitrile compounds leading to ketone ω-functionalized chains. The success of the functionalizations is extended to coupling strategies using dinitrile reagents and to the functionalization of high molar mass ethylene butadiene rubber (EBR).

Investigating the Effect of Chain Extender on the Phase Separation and Mechanical Properties of Polybutadiene-Based Polyurethane.

The thermodynamic incompatibility between the soft and hard segments of thermoplastic polyurethane (TPU) results in a microphase-separated behavior and excellent mechanical properties. However, the effect of the chain extender on the degree of microphase separation (DMS) and the resultant mechanical properties of TPU have not been well studied because of the complex interactions between the soft and hard segments. Herein, hydroxyl-terminated polybutadiene-based TPUs(HTPB-TPUs) without hydrogen bonding between the soft and hard segments are synthesized using hydroxyl-terminated polybutadiene, toluene diisocyanate, and four different chain extenders, and the effect of the chain extender structure on DMS is analyzed experimentally using a combination of analytical techniques. Furthermore, the solubility parameters of the soft and hard segments, glass transition temperatures, and hydrogen-bond density of the HTPB-TPUs, are computed using all-atom molecular dynamics simulations. The results clearly reveal that the chain extender significantly affects the DMS and thus the mechanical properties of HTPB-TPUs. This study paves the way for studying the relationship between the structure and properties of TPU.

Rubber Oxygenase Degradation Assay by UV-Labeling and Gel Permeation Chromatography.

A versatile and robust end-group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)-detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization-induced UV-maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime-based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol-1 - an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry.

Quantification of natural rubber blends by reflection/reflectance infrared and confocal Raman spectroscopy: a comparison of statistical methods.

The blend of butadiene and acrylonitrile copolymer (NBR) with natural poly-cis-isoprene (NR) shows increased resistance to swelling in solvents in comparison to the individual components. In aerospace, NBR rubber is used as thermal protection for rockets and shall not contain other polymers, even in low contents, otherwise, it can affect the protection performance and rocket safety by causing detachment of the elastomer/propellant interface; therefore, this investigation presents methodologies to determine the NR/NBR contents. This study explores different analytical techniques, such as Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy, in the mid-infrared (MIR) by reflection and in the near-infrared by reflectance (NIRA) modes, Furthermore, quantification strategies by univariate, bivariate and multivariate (chemometric) models are evaluated and compared. A proposed methodology, based on multivariate Raman microscopy with partial least squares regression (PLS), showed high linearity (R2 > 0.99) and low error (< 0.82 %). The validation of FT-MIR data for the CH3, which presented lower error (1.3%) than vinylidene band (6%), showed that both methodologies (reflection and NIRA reflectance) can be used for the quantification of NR in NR/NBR. These results constitute a contribution to the state of the art in researching industrial and aerospace elastomeric applications.

(1E,3E)-1,4-Dinitro-1,3-butadiene-Synthesis, Spectral Characteristics and Computational Study Based on MEDT, ADME and PASS Simulation.

The chemistry of conjugated nitrodienes is becoming increasingly popular. These molecules are successfully applied in cycloaddition to synthesize six-membered rings in Diels-Alder reactions. Nitrodienes can be also applied to obtain bis-compounds in [3+2] cycloaddition. Moreover, the presence of a nitro group in the structure provides a possibility of further modification of the products. The simplest symmetrical representative of conjugated nitrodienes is (1E,3E)-1,4-dinitro-1,3-butadiene. Although the first mentions of the compound date back to the early 1950s, the compound has not yet been examined thoroughly enough. Therefore, in this article, a comprehensive study of (1E,3E)-1,4-dinitro-1,3-butadiene has been described. For this purpose, an experimental study including the synthesis process as well as an evaluation of the spectral characteristics has been conducted. So as to better understand the properties of this compound, a computational study of reactivity indices based on MEDT and also an assessment of pharmacokinetics and biological activity according to ADME and PASS methodologies have been made. On this basis, some future application trends of (1E,3E)-1,4-dinitro-1,3-butadiene have been proposed.

Peering down the sink: A review of isoprene metabolism by bacteria.

Isoprene (2-methyl-1,3-butadiene) is emitted to the atmosphere each year in sufficient quantities to rival methane (>500 Tg C yr-1 ), primarily due to emission by trees and other plants. Chemical reactions of isoprene with other atmospheric compounds, such as hydroxyl radicals and inorganic nitrogen species (NOx ), have implications for global warming and local air quality, respectively. For many years, it has been estimated that soil-dwelling bacteria consume a significant amount of isoprene (~20 Tg C yr-1 ), but the mechanisms underlying the biological sink for isoprene have been poorly understood. Studies have indicated or confirmed the ability of diverse bacterial genera to degrade isoprene, whether by the canonical iso-type isoprene degradation pathway or through other less well-characterized mechanisms. Here, we review current knowledge of isoprene metabolism and highlight key areas for further research. In particular, examples of isoprene-degraders that do not utilize the isoprene monooxygenase have been identified in recent years. This has fascinating implications both for the mechanism of isoprene uptake by bacteria, and also for the ecology of isoprene-degraders in the environments.

Isotope Labeling Mass Spectrometry to Quantify Endogenous and Exogenous DNA Adducts and Metabolites of 1,3-Butadiene In Vivo.

Human exposure to known carcinogen 1,3-butadiene (BD) is common due to its high concentrations in automobile exhaust, cigarette smoke, and forest fires, as well as its widespread use in the polymer industry. The adverse health effects of BD are mediated by epoxide metabolites such as 3,4-epoxy-1-butene (EB), which reacts with DNA to form 1-hydroxyl-3-buten-1-yl adducts on DNA nucleobases. EB-derived mercapturic acids (1- and 2-(N-acetyl-l-cysteine-S-yl)-1-hydroxybut-3-ene (MHBMA) and N-acetyl-S-(3,4-dihydroxybutyl)-l-cysteine (DHBMA)) and urinary N7-(1-hydroxyl-3-buten-1-yl) guanine DNA adducts (EB-GII) have been used as biomarkers of BD exposure and cancer risk in smokers and occupationally exposed workers. However, low but significant levels of MHBMA, DHBMA, and EB-GII have been reported in unexposed cultured cells, animals, and humans, suggesting that these metabolites and adducts may form endogenously and complicate risk assessment of butadiene exposure. In the present work, stable isotope labeling in combination with high-resolution mass spectrometry was employed to accurately quantify endogenous and exogenous butadiene metabolites and DNA adducts in vivo. Laboratory rats were exposed to 0.3, 0.5, or 3 ppm of BD-d6 by inhalation, and the amounts of endogenous (d0) and exogenous (d6) DNA adducts and metabolites were quantified in tissues and urine by isotope dilution capillary liquid chromatography/high resolution electrospray ionization tandem mass spectrometry (capLC-ESI-HRMS/MS). Our results reveal that EB-GII adducts and MHBMA originate exclusively from exogenous exposure to BD, while substantial amounts of DHBMA are formed endogenously. Urinary EB-GII concentrations were associated with genomic EB-GII levels in tissues of the same animals. Our findings confirm that EB-GII and MHBMA are specific biomarkers of exposure to BD, while endogenous DHBMA predominates at sub-ppm exposures to BD.

Elicitation of E-waste (acrylonitrile-butadiene styrene) enriched soil bioremediation and detoxification using Priestia aryabhattai MGP1.

Given the rise in both usage and disposal of dangerous electronics, there is a catastrophic rise in assemblage of electronic waste (e-waste). E-waste including various plastic resins are among the most frequently discarded materials in electronic gadgets. In current digital era, managing e-waste has become universal concern. From the viewpoint of persisting lacuna of e-waste managing methods, the current study is designed to fabricate an eco-friendly e-waste treatment with native soil bacteria employing an enrichment culture method. In the presence of e-waste, indigenous soil microbes were stimulated to degrade e-waste. Microbial cultures were isolated using enrichment medium containing acrylonitrile-butadiene styrene (ABS) as the primary carbon source. Priestia aryabhattai MGP1 was found to be the most dominant e-polymer degrading bacterial isolate, as it was reported to degrade ABS plastic in disposed-off television casings. Furthermore, to increase degradation potential of MGP1, Response Surface Methodology (RSM) was adopted which resulted in optimized conditions (pH 7, shaking-speed 120 rpm, and temperature 30 °C), for maximum degradation (18.88%) after 2 months. The structural changes induced by microbial treatment were demonstrated by comparing the findings of Field emission scanning electron microscopy (FESEM) images and Fourier Transform Infrared (FTIR) spectra confirming the disappearance of ≡ C─H peaks along with C-H, C=C and C ≡N bond destabilization following degradation. Energy-dispersive X-ray (EDX) analyzers of the native and decomposed e-polymer samples revealed a considerable loss in elemental weight % of oxygen by 8.4% and silica by 0.5%. Magnesium, aluminium and chlorine which were previously present in the untreated sample, were also removed after treatment by the bacterial action. When seeds of Vigna radiata were screened using treated soil in the presence of both e-waste and the chosen potent bacterial strain, it was also discovered that there was reduced toxicity in terms of improved germination and growth metrics as a phytotoxicity criterion.

Dichloro(2,2'-bipyridine)copper/MAO: An Active and Stereospecific Catalyst for 1,3-Diene Polymerization.

Dichloro(2,2'-bipyridine)copper was synthesized by reacting copper dichloride with bypyridine, and its behavior, in combination with methylaluminoxane (MAO), in the polymerization of butadiene, isoprene, 2,3-dimethyl-1,3 butadiene, and 3-methyl-1,3-pentadiene was examined. The purpose of this study is to find catalytic systems that are more sustainable than those currently used for the polymerization of butadiene and isoprene (e.g., Co and Ni), but that are comparable in terms of catalytic activity and selectivity. Predominantly, syndiotactic 1,2 polybutadiene, crystalline syndiotactic 3,4 polyisoprene, crystalline syndiotactic 1,2 poly(3-methyl-1,3-pentadiene), and crystalline cis-1,4 poly(2,3-dimethyl-1,3-butadiene) were obtained in a manner similar to that observed with the analogous iron complex. As far as we know, the investigated catalytic system represents the first example of a copper-based catalyst in the field of stereospecific polymerization. Given the great availability of copper, its extremely low toxicity (and therefore high sustainability), and the similarity of its behavior to that of iron, the result obtained seems to us of considerable interest and worthy of further investigation.

Fabrication of Hydroxy-Terminated Polybutadiene with Piezoelectric Property by Functionalized Branch Chain Modification.

Hydroxyl-terminated polybutadiene (HTPB)-based piezoelectric polymer (m-HTPB) is prepared for the first time by functionalized branch chain modification strategy. In the presence of HTPB with >98.8% cis-1,4 content, the C=C bond partly breaks down, and functionalized acetylferrocene groups are introduced to the cis-1,4 polybutadiene branch chain, retaining the high cis-1,4 content of HTPB. The whole process is conducted under mild conditions, without complicated manipulations. The microstructure and molecular weight of m-HTPB are characterized by Fourier-transform infrared (FTIR) spectra, 1H or 13C nuclear magnetic resonance spectrum (NMR), and gel permeation chromatography (GPC). The thermal properties of HTPB and m-HTPB are determined by differential scanning calorimetry (DSC). Electrochemical investigations reveal that m-HTPB exhibits higher conductance compared with HTPB. The m-HTPB flexible piezoelectric polymer is further used for in situ and real-time pressure monitoring. This simple and effective strategy provides a promising polymeric material for flexible piezoelectric sensors.

Thermal Reprocessing and Closed-Loop Chemical Recycling of Styrene-Butadiene Rubber Enabled by Exchangeable and Cleavable Acetal Linkages.

The covalent cross-linking is an essential prerequisite for achieving the unique entropic elasticity of rubber products; however, the formation of a 3D cross-linked network and permanent cross-links makes thermosetting rubbers difficult to be recycled, causing serious environmental pollution at the end of their life. Herein, a facile, green, and promising strategy to introduce the exchangeable and cleavable acetal bonds into the chemically cross-linked networks of diene-typed rubbers is reported. For the first time, the hydroxyl-functionalized styrene-butadiene rubber (ESBR-HEMA) is prepared by introducing 2-hydroxyethyl methacrylate (HEMA) during the emulsion polymerization of styrene-butadiene rubber (ESBR). Then, based on hydroxyl-vinyl ether addition reactions, divinyl ether (DVE) could serve as a cross-linking agent to facilely and effectively cross-link hydroxyl-functionalized rubbers without additional additives, producing exchangeable and hydrolyzable acetal linkages. What's more, the acetal-containing cross-linked network in ESBR-HEMA vulcanizates could rearrange their topologies at elevated temperatures, endowing them with malleable and thermal reprocessing abilities. Moreover, the hydrolyzable acetal bonds could be selectively cleaved into hydroxyl and aldehyde groups in acidic conditions, resulting in a closed-loop chemical recycling of the ESBR-HEMA rubber. Hence, this work provides a facile and green cross-linking strategy for hydroxyl-functionalized rubbers to address the inherent problems brought from the covalent cross-linking of rubbers.

Controllable Design and Preparation of Hydroxyl-Terminated Solution-Polymerized Styrene Butadiene for Polyurethane Elastomers with High-Damping Properties.

Vibration and noise are ubiquitous in social life, which severely damage machinery and adversely affect human health. Thus, the development of materials with high-damping performance is of great importance. Rubbers are typically used as damping materials because of their unique viscoelasticity. However, they do not satisfy the requirements of different applications with various working conditions. In this study, the advantages of the high loss factor of styrene butadiene rubber (SBR) are combined with the strong designability of polyurethane. Hydroxyl-terminated solution-polymerized styrene butadiene rubbers (HTSSBRs) with different structures are prepared using anionic polymerization. HTSSBRs are then used as the soft segment during the synthesis of temperature-tunable high-damping performance polyurethanes (HTSSBR-polyurethanes (PUs)). The prepared HTSSBR-PUs with different structures exhibit excellent loss performance, a maximum loss factor (tan δmax ) of above 1.60, and an effective damping performance over a wide temperature range compared to traditional SBR and polyurethane. Therefore, this work offers an effective method for the design of damping materials with adjustable properties.

Characterization of population variability of 1,3-butadiene derived protein adducts in humans and mice.

1,3-butadiene is a known human carcinogen and a chemical to which humans are exposed occupationally and through environmental pollution. Inhalation risk assessment of 1,3-butadiene was completed several decades ago before data on molecular biomarkers of exposure and effect have been reported from both human studies of workers and experimental studies in mice. To improve risk assessment of 1,3-butadiene, the quantitative characterization of uncertainty in estimations of inter-individual variability in cancer-related effects is needed. For this, we ought to take advantage of the availability of the data on 1,3-butadiene hemoglobin adducts, well established biomarkers of the internal dose of the reactive epoxides, from several large-scale human studies and from a study in a Collaborative Cross mouse population. We found that in humans, toxicokinetic uncertainty factor for 99th percentile of the population ranged from 3.27 to 7.9, depending on the hemoglobin adduct. For mice, these values ranged from less than 2 to 7.51, depending on the dose and the adduct. Quantitative estimated from this study can be used to reduce uncertainties in the parameter estimates used in the models to derive the inhalation unit risk, as well as to address possible differences in variability in 1,3-butadiene metabolism that may be dose-related.

Diaza-1,3-butadienes as Useful Intermediate in Heterocycles Synthesis.

Many heterocyclic compounds can be synthetized using diaza-1,3-butadienes (DADs) as key structural precursors. Isolated and in situ diaza-1,3-butadienes, produced from their respective precursors (typically imines and hydrazones) under a variety of conditions, can both react with a wide range of substrates in many kinds of reactions. Most of these reactions discussed here include nucleophilic additions, Michael-type reactions, cycloadditions, Diels-Alder, inverse electron demand Diels-Alder, and aza-Diels-Alder reactions. This review focuses on the reports during the last 10 years employing 1,2-diaza-, 1,3-diaza-, 2,3-diaza-, and 1,4-diaza-1,3-butadienes as intermediates to synthesize heterocycles such as indole, pyrazole, 1,2,3-triazole, imidazoline, pyrimidinone, pyrazoline, -lactam, and imidazolidine, among others. Fused heterocycles, such as quinazoline, isoquinoline, and dihydroquinoxaline derivatives, are also included in the review.

Emission Profiles of Volatiles during 3D Printing with ABS, ASA, Nylon, and PETG Polymer Filaments.

In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.

Stereo- and Site-Selective Crotylation of Alcohol Proelectrophiles via Ruthenium-Catalyzed Hydrogen Auto-Transfer Mediated by Methylallene and Butadiene.

Iodide-bound ruthenium-JOSIPHOS complexes catalyze the redox-neutral C-C coupling of primary alcohols with methylallene (1,2-butadiene) or 1,3-butadiene to form products of anti-crotylation with good to excellent levels of diastereo- and enantioselectivity. Distinct from other methods, direct crotylation of primary alcohols in the presence of unprotected secondary alcohols is possible, enabling generation of spirastrellolide B (C9-C15) and leucascandrolide A (C9-C15) substructures in significantly fewer steps than previously possible.