Dental age assessment in the living: a comparison of two common stage classifications for assessing radiographic visibility of the root canals in mandibular third molars.

After dentition is complete, degenerative tooth characteristics can be used for dental age assessment. Radiological assessment of the visibility of the root canals of the mandibular third molars in dental panoramic radiographs (DPRs) is known to be one such suitable feature. Essentially, two different stage classifications are available for evaluating the visibility of the root canals of mandibular third molars in the DPR. The aim of this study was to determine if one method outperforms the other. Therefore, the 2010 method of Olze et al. was directly compared to the 2017 method of Lucas et al. in the 2020 modification of Al Qattan et al. To this end, 233 DPRs from 116 females and 117 males aged 20.0 to 40.9 years were evaluated by three independent experienced examiners. In addition, one examiner ran two independent evaluations. Correlation between age and stage was investigated, and the inter- and intra-rater reliability was estimated for both methods. Correlation between age and stage was higher with the Olze method (Spearman rho 0.388 [95% CI 0.309, 0.462], males and 0.283 [95% CI 0.216, 0.357], females) than the Lucas method (0.212 [95% CI 0.141, 0.284], males and 0.265 [95% CI 0.193, 0.340], females). The intra-rater repeatability of the Olze method (Krippendorff's α = 0.576 [95% CI 0.508, 0.644], males and α = 0.592 [95% CI 0.523, 0.661], females) was greater than that for the Lucas method (intra-rater α = 0.422 [95% CI 0.382, 0.502], males and α = 0.516 [95% CI 0.523, 0.661], females). Inter-rater reproducibility was also greater for the Olze method (α = 0.542 [95% CI 0.463, 0.620], males and α = 0.533 [95% CI 0.451, 0.615], females) compared to the Lucas method (α = 0.374 [95% CI 0.304, 0.443], males and α = 0.432 [95% CI 0.359, 0.505], females). The method of Olze et al. was found to present marginal advantages to the Lucas et al. method across all examinations and may be a more appropriate method for application in future studies.

4-META/MMA-TBB resin containing nano hydroxyapatite induces the healing of periodontal tissue repair in perforations at the pulp chamber floor.

We aimed to evaluate the materials based on 4-methacryloxyethyl trimellitate anhydride/methyl methacrylate tri-n-butylborane (Super-bond [SB]) and nano hydroxyapatite (naHAp) for the repair of perforation at pulp chamber floor (PPF) in vitro and in vivo models. SB and naHAp were mixed in the mass ratio of 10% or 30% to produce naHAp/SB. Human periodontal ligament stem cells (HPDLSCs) were cultured on resin discs of SB or naHAp/SB to analyze the effects of naHAp/SB on cell adhesion, proliferation, and cementoblastic differentiation. A rat PPF model was treated with SB or naHAp/SB to examine the effects of naHAp/SB on the healing of defected cementum and periodontal ligament (PDL) at the site of PPF. HPDLSCs were spindle-shaped and adhered to all resin discs. Changing the resin from SB to naHAp/SB did not significantly alter cell proliferation. Both 10% and 30% naHAp/SB were more effective than SB in promoting cementoblastic differentiation of HPDLSCs. In the rat PPF model, 30% naHAp/SB was more effective than SB in promoting the formation Sharpey's fiber-like structures with expression of the PDL-related marker and cementum-like structures with expression of cementum-related markers. In conclusion, 30% naHAp/SB can be the new restorative material for PPF because it exhibited the abilities of adhering to dentin and healing of defected periodontal tissue.

Comprehensive Analysis of Mandibular First Molar Root and Canal Morphology in Saudi Patients Using Cone Beam Computed Tomography (CBCT).

BACKGROUND The goal of conventional endodontic therapy is to clean the root canal system thoroughly, restore tooth function, and prevent re-infection. Success depends on understanding root canal morphology, resolving apical periodontitis, and using proper techniques. Studies highlight variations in root canal anatomy, with cone-beam computed tomography (CBCT) being crucial for accurate diagnosis despite its high cost and limited availability. MATERIAL AND METHODS This retrospective study reviewed CBCT images of 1820 (907 male, 913 female) patients aged 18 to 78 years. Analysis included 2081 mandibular first molars for variations in root and canal morphology and right- and left-side symmetry. Inter-orifice distance was measured, along with distance from the cementoenamel junction (CEJ) to the level of canal bifurcation. RESULTS In this study, 96.01% of teeth had 2 roots and 3.89% had 3 roots. The percentages of canal configuration were 77.70% for 3 canals, 21.58% for 4 canals, 0.67% for 2 canals, and 0.05% for 1 canal. The inter-orifice distance was 2.07 mm for 2 canals in 1 root and 2.86 mm for 2 canals in separate distal roots. Distance from the CEJ to canal bifurcation varied significantly between 2 canals within 1 distal root (3.35 mm), 2 canals in separate distal roots (1.60 mm), as well as between distal (3.35 mm) and mesial roots (1.10 mm). CONCLUSIONS In mandibular first molars, only 3.89% have additional distolingual roots. Sex and ethnicity showed no influence on number of roots and canals. Distal canals showed a deeper bifurcation and greater inter-orifice distance than did mesial canals.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Apical root canal microbiome associated with primary and posttreatment apical periodontitis: A systematic review.

BACKGROUND: Microorganisms colonizing the apical root canal system are conceivably the ones directly involved with the causation and maintenance of apical periodontitis. OBJECTIVES: This article systematically reviews the reports on the microbiome occurring exclusively at the apical root canal of teeth with primary and posttreatment apical periodontitis. METHODS: The electronic databases PubMed, Embase, Web of Science, Science Direct, and Proquest were searched up to August 2023. Clinical studies using culture and molecular microbiology methods to identify the microbial taxa present exclusively in the apical root canal segment of infected teeth with apical periodontitis were included. Studies were critically assessed using the Joanna Briggs Institute Critical Prevalence Assessment Checklist. RESULTS: From 2277 articles initially detected, 52 were selected for full reading and 21 were eventually included in this review. Of these, molecular methods were used in 19 and culture in 2 studies. Ten studies evaluated primary infections, 8 evaluated posttreatment infections, and 3 included both. Cryopulverization of the apical root specimens was conducted in 11 studies. All studies evaluated the prevalence and diversity of bacteria, and only one also reported on fungi. Overall, the most frequent/abundant bacterial taxa found in the apical canal of primary infections were Pseudoramibacter alactolyticus, Olsenella uli, Fusobacterium species, Streptococcus species, Porphyromonas endodontalis, Prevotella species, Actinomyces species, Parvimonas micra, Treponema denticola, Synergistetes species, and an as-yet uncharacterized taxon. In posttreatment infections, the most prevalent/abundant bacterial taxa included species of Streptococcus, Enterococcus, Fusobacterium, Actinomyces, Pseudoramibacter, Pseudomonas, and Propionibacterium. At the phylum level, Firmicutes was the most represented. The average apical bacterial load ranged from 105 to 106 in primary infections and from 103 to 104 in posttreatment infections. DISCUSSION: Microbial diversity in the apical part of the root canal system was examined encompassing data from both primary and posttreatment infections. Heterogeneity amongst the studies, especially in sample collection and microbial identification methods, is an important limitation that prevented a meta-analysis. CONCLUSIONS: There is a pronounced bacterial diversity in the infected apical canal, with a high interindividual variability. Different microbiome compositions at the species/genus level are observed according to the infection type. REGISTRATION: PROSPERO CRD42021275886.

Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers.

AIM: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers. METHODOLOGY: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material. RESULTS: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05). CONCLUSIONS: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

Factors associated with the outcome of root canal treatment-A cohort study conducted in a private practice.

AIM: To investigate the association of various pre-, intra- and post-operative factors on root canal treatment outcome. METHODOLOGY: In this cohort study, primary or secondary root canal treatment of mature permanent teeth was performed by a single endodontist in a private practice over 13 years, and followed 1-4 years after treatment. Treatment details and clinical and radiographic data were collected. The proportion of successfully treated teeth and roots based on strict radiographic (periapical index (PAI) ≤2) and clinical criteria (absence of pain, swelling or sinus tract) was estimated. To evaluate joint associations of prognostic factors and treatment success probability, 44 pre, intra- and post-operative factors were investigated using bivariate associations, and a multiple logistic regression model was fitted using Generalized Estimating Equations. RESULTS: 1259 teeth (2445 roots, 3149 canals) were assessed with a recall rate of 91%. The proportion of successfully treated teeth was 79.9% [95% confidence interval 77.7-82.1]. Eleven prognostic factors were identified that significantly reduced the odds ratio (OR) for treatment success at tooth level. Six were preoperative: injury history (OR = 0.05[0.01-0.24]), root PAI (OR = 0.29[0.20-0.42], 0.21[0.13-0.34] and 0.22[0.12-0.42] for PAI = 3, 4 and 5, respectively, against PAI = 1), lesion diameter (OR = 0.30[0.21-0.43] and 0.24[0.16-0.37] for diameters of 1-5 mm and ≥6 mm, respectively, against no lesion), tooth type (OR = 0.51[0.27-0.97] and OR = 0.45[0.24-0.83] for premolars and molars, respectively, against incisors or canines), tenderness to periapical palpation (OR = 0.64[0.43-0.94]) and two canals per root (OR = 0.67[0.54-0.83]). Four factors were intraoperative: root filling of unsatisfactory quality (OR = 0.18[0.08-0.40]) or extending beyond or shorter than 2 mm from the apex (OR = 0.44[0.26-0.75] and 0.62[0.40-0.97] respectively), resin sealer (OR = 0.58[0.39-0.87] against bioceramic sealer) and single visit treatment (OR = 0.40[0.21-0.75] against multiple visits). One factor was post-operative: defective coronal restoration (OR = 0.35[0.21-0.56]). CONCLUSION: The following factors were associated with unsuccessful root canal treatment: (i) history of injury, apical periodontitis with increased severity (larger lesion, higher PAI, tenderness to periapical palpation), or complicated anatomic conditions (premolar or molar, two canals in a single root); (ii) technically suboptimal root filling (of unsatisfactory quality or not ending within 2 mm of radiographic apex) performed in a single-visit, or use of resin sealer instead of novel bioceramic sealer; (iii) suboptimal quality coronal restoration.

Precision-milled simulated curved root canals in bovine dentine for the assessment of chemo-mechanical root canal preparation.

AIM: The aim was to develop a standardized curved root canal model in bovine dentine and to assess whether that natural substrate would behave differently from the resin in standard plastic training blocks when prepared chemo-mechanically. The impact of substrate microhardness on simulated canal transportation was considered. METHODOLOGY: High-precision computer numerical control (CNC) milling was used to recreate a simulated root canal from a resin training block (Endo Training Bloc J-Shape, size 15) in longitudinally sectioned, dis- and re-assembled bovine incisor roots. Optical overlays obtained from 10 resin blocks were used to identify an average canal and program the CNC milling apparatus accordingly. Resin and dentine microhardness were measured. Simulated root canals in resin training blocks and their bovine counterparts were then instrumented at 37°C using Reciproc R25 instruments (VDW) with water or 17% EDTA (n = 10). Open-access image processing software was used to superimpose and analyse pre- and postoperative images obtained with a digital microscope. Centering ratios were averaged to indicate canal transportation. The effects of substrate and irrigant on canal transportation were assessed by two-way anova. RESULTS: Superimposed images showed that resin blocks under investigation varied considerably in terms of simulated canal length and curvature, whilst the milled canals were highly similar. The microhardness of dentine was more than three times higher than that of the resin. Conversely, canal transportation was considerably greater in dentine compared to resin, and in dentine had a tendency to be increased by EDTA. There was a strong effect of substrate on canal transportation (p < .001), no overall effect of irrigant, and a marginally significant interaction between irrigant and substrate (p = .077). CONCLUSIONS: CNC milling allows to create standardized simulated curved root canals in bovine dentine. These models may be useful to test and compare materials and concepts of chemo-mechanical root canal instrumentation. Microhardness is a bulk feature that does not predict the response to chemo-mechanical instrumentation of a composite material such as dentine.

Identification of keystone taxa in root canals and periapical lesions of post-treatment endodontic infections: Next generation microbiome research.

AIM: The aim of this study was to analyse and compare the microbiome present in root canals and periapical lesions of teeth with post-treatment infections, and to identify the presence of keystone taxa in both habitats using next-generation sequencing analysis. METHODOLOGY: Apices and periapical lesions of patients with post-treatment apical periodontitis were surgically extracted. Specimens were cryo-pulverized, bacterial DNA was extracted, and the V3-V4 hypervariable regions of the 16S rRNA gene were sequenced using the Illumina Miseq platform. Bioinformatic analysis was carried out with Mothur software, whilst diversity indices were obtained using operational taxonomic units (OTUs). The diversity indices were compared with the Kruskal-Wallis test, and community composition differences were explored with Permutational Multivariate Analysis of Variance (PERMANOVA). A bacterial functional study was performed with the Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) analysis. Co-occurrence network analyses were performed using the Sparse Correlations for Compositional data (SparCC). Eigencentrality, clr-based abundance and ubiquitousness were applied to infer keystone taxa. P values <.05 were considered statistically significant. RESULTS: Thirty-two apices and thirty-nine periapical lesions were sequenced and analysed. A similar alpha-diversity (p < .05) and community composition (p = .91) was observed for apices and lesion samples. The most abundant OTUs identified amongst all samples included Fusobacterium nucleatum, Prevotella loescheii, Streptococcus intermedius, Porphyromonas gingivalis, Parvimonas micra, Synergistetes bacterium, Tannerella forsythia and Peptostreptococcus stomatis. The metabolic pathways with >0.81% abundances included membrane transport, genetic information processing and metabolic pathways. F. nucleatum was identified as a keystone taxon as it showed ubiquitousness, an eigenvector centrality value of 0.83 and a clr-based abundance >4. CONCLUSIONS: The microbiome in apices and periapical lesions of post-treatment endodontic infections showed a similar diversity and taxonomic composition. Co-occurrence network analyses at OTU level identified F. nucleatum as a keystone taxon candidate in these infections.

The effect of root canal preparation tapers on planktonic bacteria and biofilm reduction in the apical third: A correlative microtomography and microbiological laboratory study.

AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.

Exploring morphometric transformations in temperature-sensitive NiTi instruments alongside real-time intracanal temperature dynamics.

AIM: This study was twofold: (i) it aimed to investigate the morphometric changes of three temperature-sensitive nickel-titanium (NiTi) instruments at different temperatures, and (ii) to conduct an in vivo real-time analysis of intracanal temperature changes. METHODS: Changes in the shape and length of XP-Endo Shaper, XP-Endo Finisher, and XP-Endo Finisher-R were evaluated in real time whilst heated in a temperature-controlled water bath from 22 to 45°C. Instruments were fixed to a laminated water-resistant 1 mm graph paper attached to a stone block. Instruments were imaged whilst subjected to increasing temperature using a digital camera attached to an operating microscope. From recorded videos, still frames were extracted at 10-s intervals and changes in the length and shape of each instrument were measured and changes were plotted against time. Moreover, the intracanal temperature of distal roots of lower molars was measured in vivo for patients attending the clinic for non-surgical root canal treatments. The temperature was measured using a K-type thermocouple probe inserted into the mid-root level after irrigating the canal with a solution set at room temperature (22°C) or heated to 45°C. The intraoral and intracanal temperatures were recorded using a video camera for 180 s at 5-s intervals to plot the change in the intraoral and intracanal temperature, after both irrigation solution temperatures, with time. RESULTS: The shape transformation of XP-Endo Shaper began at 31.5 ± 2.0°C and reached its optimal transformation at 35.1 ± 1.0°C. For the Finisher and Finisher-R, shape transformations began at 29.2 ± 1.9 and 26.9 ± 2.2°C reaching the optimal transformation at 33.9 ± 1.4 and 32.7 ± 1.7°C, respectively. The average decreases in lengths of XP-Endo Shaper, Finisher, and Finisher-R after full transformation were 0.43 ± 0.23, 1.07 ± 0.22, and 1.15 ± 0.22 mm, respectively. The intracanal temperature reached 32.9 ± 0.8 and 33.2 ± 1.0°C after 3 min of application of irrigation solutions set at 22 or 45°C, respectively. CONCLUSION: The tested instruments exhibited diverse changes in their shapes and lengths at varying temperatures. Despite the temperature of the irrigation solution, the intracanal temperature consistently remained lower than the intracanal temperature once equilibrium was reached. This highlights the importance of considering the temperature of irrigation solution during in vitro testing of endodontic instruments.

Predictors of periapical bone healing associated with teeth having large periapical lesions following nonsurgical root canal treatment or retreatment: A cone beam computed tomography-based retrospective study.

AIM: Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the relationship between the time to complete healing when analysed using cone beam computed tomography (CBCT) and other possible predictors that affect healing. METHODOLOGY: Seventy-nine patients were treated during the years 2013-2020 with large periapical lesions of endodontic origin (10-15 mm) as observed on intraoral periapical radiographs (IOPAR) were included. IOPAR and CBCT were available before treatment and during the follow-up (IOPAR every 6 months and CBCT every 12 months). The volume of periapical lesions was calculated by OsiriX Lite software. Variables such as initial volume of the lesion, age, gender, type of treatment or type of root canal filling were compared to identify the differences between healed and unhealed lesions. Pearson's Chi-square test was used for categorical variables, the t-test for age and the Wilcoxon test for initial volume of the lesion. The association between time to healing and the variables was assessed using univariate analysis and multivariate analysis. The Wilcoxon test was used to observe the association of healing time with categorical variables and the correlation index was measured with the quantitative variables. RESULTS: Of the 79 cases analysed, 60 lesions (76%) were completely healed as verified by CBCT in a mean healing time of 19 months, of which 60% healed fully between 12 and 18 months. Increase in age of patient and larger initial volume of the lesion were associated with a significantly longer healing time (p < .001). Gender, filling material and type of treatment did not have a significant effect on the healing process (p > .05). CONCLUSIONS: Clinicians should be aware that periapical lesions in older patients and larger areas of bone loss take longer to heal. CBCT monitoring of large periapical lesions is critical and it can help clinicians in the decision-making process.

Radiographic outcome of endodontic treatment and retreatment of teeth with apical periodontitis using two different root canal irrigants. A prospective cohort study.

AIM: The aim of this prospective cohort study was to compare the radiographic outcome of endodontic treatment and retreatment of teeth with apical periodontitis using either 1% sodium hypochlorite (NaOCl) or 2% chlorhexidine digluconate (CHX) for root canal irrigation. MATERIALS AND METHODS: In the years from 2013 to 2015 standard irrigation varied by semester between NaOCl and CHX at the Department of Endodontics at the Faculty of Dentistry. During that time, 912 teeth received treatment for apical periodontitis in 744 patients, of whom 532 responded to the request for a 1-year follow-up. Only one tooth per person (the most distally located) were included; 285 teeth treated with NaOCl and 247 with CHX. One hundred cases were then randomly sampled from each irrigation group and analysed for outcome by periapical index (PAI) scoring using criteria for success, uncertain and failure. Clinical and other radiographic parameters were scored or recorded and analysed for associations with radiographic outcome using chi-square, ANOVA and regression analyses. RESULTS: Success rates (PAI score 1 or 2 at control) were nearly identical for the two irrigation liquids. The use of irrigating solution also did not significantly influence the outcome in chi-square analyses of subgroups of teeth or regression analyses with other variables included. Ordinal regression analysis established that preoperative lesion size or preoperative PAI score were significantly associated with outcome, and teeth in the mandible had significantly better outcomes than in the maxilla. CONCLUSIONS: No significant differences in the radiographic outcome using either 1% NaOCl or 2% CHX as irrigants were found. The outcome was better for teeth with small lesions or lower PAI scores at completion of treatment and for mandibular teeth.

Effect of final irrigation protocols with chitosan nanoparticle and genipin on dentine against collagenase degradation: An ex-vivo study.

AIM: Endodontic irrigants may affect the mechanical and chemical properties of dentine. This study evaluated the effects of various final irrigation protocols including the use of chitosan nanoparticle (CSnp) and cross-linking with genipin on the (1) mechanical and (2) chemical properties of dentine against enzymatic degradation. METHODOLOGY: CSnp was synthesized and characterized considering physiochemical parameters and stability. The root canals of 90 single-rooted teeth were prepared and irrigated with NaOCl. Dentine discs were obtained and divided into groups according to the following irrigation protocols: Group NaOCl+EDTA, Group NaOCl+CSnp, Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin, Group NaOCl+EDTA+CSnp+Genipin and Group distilled water. (1) Mechanical changes were determined by microhardness analysis using Vickers-tester. (2) Chemical changes were determined by evaluating molecular and elemental compositions of dentine using Fourier transform infrared spectroscopy (FTIR) analysis and scanning electron microscope (SEM)/energy dispersive X-ray spectroscopy (EDS) analysis, respectively. All analyses were repeated after the discs were kept in collagenase for 24 h. Data were analysed with repeated measures analysis of variance and Bonferroni correction for microhardness analysis, and Kruskal-Wallis and Wilcoxon tests for FTIR and SEM/EDS analyses (p = .05). RESULTS: (1) Collagenase application did not have a negative effect on microhardness only in Group NaOCl+EDTA+CSnp+Genipin when compared with the post-irrigation values (p > .05). Post-collagenase microhardness of Group NaOCl+EDTA+CSnp and Group NaOCl+CSnp+Genipin was similar to the initial microhardness (p > .05). (2) After collagenase, Amide III/ PO 4 3 - ratio presented no change in Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin and Group NaOCl+EDTA+CSnp+Genipin (p > .05), while decreased in other groups (p < .05). Collagenase did not affect CO 3 2 - / PO 4 3 - ratio in the groups (p > .05). There were no changes in the groups in terms of elemental level before and after collagenase application (p > .05). CONCLUSIONS: CSnp and genipin positively affected the microhardness and molecular composition of dentine. This effect was more pronounced when CSnp was used after EDTA.

Reduced C-reactive protein levels after root canal treatment in clinically healthy young apical periodontitis individuals at cardiovascular risk. A prospective study.

AIM: To determine the systemic inflammatory burden, including hsCRP and its monomeric forms, in patients with apical lesions of endodontic origin treated with root canal treatment (RCT). METHODOLOGY: Prospective pre-/post-study. Apical periodontitis (AP) individuals aged 16-40 were included (N = 29). Individuals received RCT and were followed at 1 and 6 months. Fasting blood samples were obtained. Apical lesions of endodontic origin (ALEO) diameter (mm), and periapical index (PAI), were recorded. The serum concentrations of total hsCRP were determined by turbidimetry. Tumour necrosis factor (TNF)-α, interleukin (IL)-6, IL-10, IL-1ß, and soluble (s) E-selectin were assessed by Multiplex assay. Additionally, mCRP forms were determined in the serum of AP patients with a baseline moderate to high cardiovascular risk based on hsCRP stratification (hsCRP ≥1 mg/L) by immunowestern blot (n = 15). Also, CRP isoforms were explored in ALEOs from AP individuals (n = 4). Data were analysed with StataV16. RESULTS: Periapical index and ALEO sizes were reduced at both follow-up visits after RCT (p < .05). Serum levels of TNF-α, IL-6, IL-10, IL-1ß, and sE-selectin did not show significant differences. CRP was borderline reduced at 1 month (p = .04); however, in AP individuals at cardiovascular risk (hsCRP ≥ 1 mg/L), hsCRP and its monomeric isoform significantly decreased at 1 and 6 months (p < .05). CONCLUSIONS: High-sensitivity CRP and mCRP are reduced after RCT in AP individuals at cardiovascular risk.

Substance P/calcitonin gene-related peptide and their receptors expression in human periodontal ligament after root canal preparation with five different systems.

AIM: The purpose of this study was to quantify the effect of five different root canal preparation instruments on Substance P (SP), Calcitonin gene-related peptide (CGRP) and their receptors expression in healthy human periodontal ligament. METHODOLOGY: STROBE guidelines were used to design a study using 60 periodontal ligament samples obtained from healthy lower premolars where extraction was indicated for orthodontic reasons. Prior to extraction 40 of these premolars were equally divided into four groups and root canals were prepared using different systems: Mtwo, Reciproc Blue, HyFlex EDM and Plex-V. Ten premolars were prepared with hand files and served as a positive control group. The remaining 10 premolars where extracted without treatment and served as a negative control group. All periodontal ligament samples were processed to measure the expression of SP, CGRP and their receptors by radioimmunoassay. Kruskal-Wallis and Duncan tests were performed to determine statistically significant differences between the groups for each variable. RESULTS: Greater expression of all the peptides measured were found in the hand-file preparation group, followed by the Reciproc Blue, Mtwo, HyFlex EDM and Plex-V groups. The lower SP, CGRP and their receptors values were for the intact teeth control group. Kruskal-Wallis test showed statistically significant differences amongst groups (p < .001). Dunn post-hoc tests showed statistically significant differences in SP, CGRP and their receptors expression between the intact teeth and the hand-file and Reciproc Blue groups. Hand-file group showed significant differences with the other groups, except with Reciproc Blue, where no differences were observed in any of the peptides measured. Finally, no differences were observed between Plex-V and HyFlex in any of the peptides measured. CONCLUSIONS: Root canal preparation with hand files and Reciproc Blue generates the highest expression of SP, CGRP, NK1 and CGRP1R in human periodontal ligament, whilst Plex-V and HyFlex maintain the basal expression of neuropeptides and their receptors. Mtwo showed intermediate results between Reciproc Blue and HyFlex.

Clinical strategies for successful palato-mesiobuccal canal management-Report of 2 cases.

AIM: To describe the management of the palato-mesiobuccal (PMB) canal in maxillary second molars with fused roots using conventional techniques. SUMMARY: Root canal treatment success hinges upon effectively addressing the intricate and variable anatomy of molar teeth. Failure to do so can lead to persistent infections and treatment failure. Recent advancements in imaging technologies have provided unparalleled insights into dental anatomy, especially in molars. Among these discoveries is the PMB canal, a unique anatomical variant recently reported for the first time in Endodontic literature. This canal, found in maxillary second molars with fused roots and originating from the coronal third of the palatal canal while traversing towards the mesiobuccal root presents challenges in clinical management due to its location. This article is the first to showcase the management of the PMB canal using conventional techniques. In the first case, a 38-year-old male patient presented with asymptomatic irreversible pulpitis in the maxillary second right molar. Following thorough instrumentation and irrigation, the presence of the PMB canal was discovered during root canal preparation. The canal was managed using rotary instruments and obturated successfully, resulting in a symptom-free tooth at an 8-year follow-up. The second case illustrates a similar scenario in a 23-year-old female patient presenting with symptomatic irreversible pulpitis in tooth 17. The PMB canal was identified during treatment and managed using rotary nickel-titanium instruments, leading to a favourable outcome at a 9-year follow-up. KEY LEARNING POINTS: In fused roots of maxillary second molars, a PMB canal might be expected. Exploration of the buccal wall of the palatal canal under magnification after shaping procedures can reveal the PMB canal orifice in fused roots. Small tapers are suggested for the enlargement of the PMB canal. Continuous bleeding spots in the palatal canal might indicate a possible PMB canal orifice in vital cases. The use of an apex locator is suggested for the differential diagnosis of the PMB canal orifice from a perforation site.

Efficacy of the GentleWave System in the removal of biofilm from the mesial roots of mandibular molars before and after minimal instrumentation: An ex vivo study.

AIM: To compare the efficacy of Enterococcus faecalis biofilm removal using the GentleWave System (GWS) (Sonendo Inc, CA) on non-instrumented versus minimally instrumented root canal systems. METHODOLOGY: Thirty-four mandibular molars were autoclaved and allocated to four groups: Negative control (n = 5); positive control (n = 5); Group 1: non-instrumentation + GWS (NI + GWS) (n = 12); and Group 2: minimal instrumentation + GWS (MI + GWS) (n = 12). Of 34 samples, 24 samples with Vertucci type 2 configuration within the mesial root of each sample were allocated to Groups 1 and 2 and then matched based on the working length and root canal configuration. After inoculation of samples with E. faecalis for 3 weeks, the GWS was used on Group 1 without any instrumentation and Group 2 after instrumentation of mesial canals until size 20/06v. CFU and SEM analysis were used. RESULTS: Log10 (CFU/mL) from the positive control, and Group 1 and 2 were 7.41 ± 0.53, 3.41 ± 1.54, and 3.21 ± 1.54, respectively. Both groups showed a statistically significant difference in the reduction of viable E. faecalis cells compared to the positive control (Group 1 [p = .0001] and Group 2 [p < .0001]), whilst showing no significant difference between the two tested groups (p < .05). CONCLUSION: The use of GWS on the non-instrumented root canal system could be an effective disinfection protocol in removing the biofilm without dentin debris formation.

Microrobotics in endodontics: A perspective.

Microorganisms are the primary aetiological factor of apical periodontitis. The goal of endodontic treatment is to prevent and eliminate the infection by removing the microorganisms. However, microbial biofilms and the complex root canal anatomy impair the disinfection process. Effective and precise endodontic therapy could potentially be achieved using advanced multifunctional technologies that have the ability to access hard-to-reach surfaces and perform simultaneous biofilm killing, removal, and detection of microorganisms. Advances in microrobotics are providing novel therapeutic and diagnostic opportunities with high precision and efficacy to address current biofilm-related challenges in biomedicine. Concurrently, multifunctional magnetic microrobots have been developed to overcome the disinfection challenges of current approaches to disrupt, kill, and retrieve biofilms with the goal of enhancing the efficacy and precision of endodontic therapy. This article reviews the recent advances of microrobotics in healthcare and particularly advances to overcome disinfection challenges in endodontics, and provides perspectives for future research in the field.

Influence of pulse energy, tip design and insertion depth during Er:YAG-activated irrigation on cleaning efficacy in simulated severely curved complex root canal systems in vitro.

AIM: To investigate the influence of pulse energy, tip geometry and tip position in simulated 3D-printed root canals with multiple side canals at different levels in all directions on the cleaning performance of laser-activated irrigation (LAI) compared to sonic activation (EDDY) and conventional needle irrigation (NI). METHODOLOGY: 3D-printed root canal models (25/.06, length 20 mm, curvature 60°, radius 5 mm) with side canals (diameter 0.2 mm) at 2, 5 and 8 mm from the apex were filled with coloured biofilm-mimicking hydrogel. LAI (Morita AdvErL Evo, Kyoto, Japan) was performed with six settings (n = 20; pulse-energy, pulses per second [PPS], tip position): LAI1 (50 mJ, 25 PPS, P400FL, canal entrance [CE]), LAI2 (same as LAI1, but insertion depth 9 mm before the apical endpoint [AE] [corresponding to 1 mm above the first lateral canals]), LAI3 (80 mJ, 25 PPS, P400FL, 9 mm before AE), LAI4 (same as LAI 3, but at CE) for 3 × 20 s each, LAI5 (50 mJ, 25 PPS, P400FL 2 × 20 s, CE & R200T (30 mJ, 25 PPS, 1 × 20 s, 9 mm before AE), LAI6 (30 mJ, 25 PPS, R200T, 9 mm before AE, 3 × 20 s). A continuous irrigation (3 mL/20 s) using distilled water accompanied the irrigation cycles. NI and EDDY (3 × 20 s each; 3 mL/20 s irrigation, insertion AE minus 1 mm, amplitude 4 mm) served as control groups. Biofilm-mimicking hydrogel removal (ImageJ, NIH) was assessed for the entire system, the central canal and the lateral canals using standardized photographs with a microscope (Expert DN, Müller-Optronic) and statistically analysed was performed using Kruskal-Wallis and Dunn tests (p = .05). Irrigant extrusion beyond the foramina was also recorded. RESULTS: LAI2 (99.08%; interquartile range [IQR]: 96.85-100.00) and LAI3 (97.50%; 96.24-100.00) achieved the significantly best and LAI6 (80.08%; 73.41-84.69) the significantly worst removal of hydrogel from the entire root canal system amongst all LAI configurations (p < .05). There were no significant differences between LAI6, EDDY (72.89%; 67.49-76.22) and manual irrigation (54.39%; 51.01-56.94) (p > .05). R200T laser tip caused significantly more often irrigant extrusion than all other techniques (p < .05). CONCLUSION: Tip design, energy settings, and the positioning of the laser tip below the canal entrance caused an improvement in cleaning performance of the LAI. However, the small R200T tip created significantly more procedural errors (irrigant extrusion) due to higher concentrated energy.