Part I: Development and Physiology of the Temporomandibular Joint.

PURPOSE OF REVIEW: Investigate the developmental physiology of the temporomandibular joint (TMJ), a unique articulation between the cranium and the mandible. RECENT FINDINGS: Principal regulatory factors for TMJ and disc development are Indian hedgehog (IHH) and bone morphogenetic protein (BMP-2). The mechanism is closely associated with ear morphogenesis. Secondary condylar cartilage emerges as a subperiosteal blastema on the medial surface of the posterior mandible. The condylar articular surface is immunoreactive for tenascin-C, so it is a modified fibrous periosteum with an underlying proliferative zone (cambrium layer) that differentiates into fibrocartilage. The latter cushions high loads and subsequently produces endochondral bone. The TMJ is a heavily loaded joint with three cushioning layers of fibrocartilage in the disc, as well as in subarticular zones in the fossa and mandibular condyle. The periosteal articular surface produces fibrocartilage to resist heavy loads, and has unique healing and adaptive properties for maintaining life support functions under adverse environmental conditions.

Approaches to improve integration and regeneration of an ex vivo derived temporomandibular joint disc scaffold with variable matrix composition.

Due to their natural biochemical and biomechanical characteristics, using ex vivo tissues as platforms for guided tissue regeneration has become widely accepted, however subsequent attachment and integration of these constructs in vivo is often overlooked. A decellularized porcine temporomandibular joint (TMJ) disc has shown promise as a scaffold to guide disc regeneration and preliminary work has shown the efficacy of surfactant (SDS) treatment within the fibrocartilaginous disc to remove cellular components. The majority of studies focus on the intermediate region of the disc (or disc proper). Using this approach, inherent attachment tissues can be maintained to improve construct stability and integration within the joint. Unlike human disc attachment tissue, the porcine attachment tissues have high lipid content which would require a different processing approach to remove immunogenic components. In order to examine the effect of delipidation on the attachment tissue properties, SDS and two organic solvent mixtures (acetone/ethanol and chloroform/methanol) were compared. Lipid and cellular solubilization, ECM alteration, and seeded human mesenchymal stem cell (MSC) morphology and viability were assessed. Quantitative analysis showed SDS treatments did not effectively delipidate the attachment tissues and cytotoxicity was noted toward MSC in these regions. Acetone/ethanol removed cellular material but not all lipids, while chloroform/methanol removed all visible lipid deposits but residual porcine cells were observed in histological sections. When a combination of approaches was used, no residual lipid or cytotoxicity was noted. Preparing a whole TMJ graft with a combined approach has the potential to improve disc integration within the native joint environment.

Fibro/chondrogenic differentiation of dental stem cells into chitosan/alginate scaffolds towards temporomandibular joint disc regeneration.

Tissue engineering (TE) may provide effective alternative treatment for challenging temporomandibular joint (TMJ) pathologies associated with disc malpositioning or degeneration and leading to severe masticatory dysfunction. Aim of this study was to evaluate the potential of chitosan/alginate (Ch/Alg) scaffolds to promote fibro/chondrogenic differentiation of dental pulp stem cells (DPSCs) and production of fibrocartilage tissue, serving as a replacement of the natural TMJ disc. Ch/Alg scaffolds were fabricated by crosslinking with CaCl2 combined or not with glutaraldehyde, resulting in two scaffold types that were physicochemically characterized, seeded with DPSCs or human nucleus pulposus cells (hNPCs) used as control and evaluated for cell attachment, viability, and proliferation. The DPSCs/scaffold constructs were incubated for up to 8 weeks and assessed for extracellular matrix production by means of histology, immunofluorescence, and thermomechanical analysis. Both Ch/Alg scaffold types with a mass ratio of 1:1 presented a gel-like structure with interconnected pores. Scaffolds supported cell adhesion and long-term viability/proliferation of DPSCs and hNPCs. DPSCs cultured into Ch/Alg scaffolds demonstrated a significant increase of gene expression of fibrocartilaginous markers (COLI, COL X, SOX9, COM, ACAN) after up to 3 weeks in culture. Dynamic thermomechanical analysis revealed that scaffolds loaded with DPSCs significantly increased storage modulus and elastic response compared to cell-free scaffolds, obtaining values similar to those of native TMJ disc. Histological data and immunochemical staining for aggrecan after 4 to 8 weeks indicated that the scaffolds support abundant fibrocartilaginous tissue formation, thus providing a promising strategy for TMJ disc TE-based replacement.

Human jaw joint hypermobility: Diagnosis and biomechanical modelling.

Patients with hypermobility disorders of the jaw joint experience joint sounds and jerky movements of the jaw. In severe cases, a subluxation or luxation can occur. Clinically, hypermobility disorders should be differentiated from disc displacements. With biomechanical modelling, we previously identified the anterior slope angle of the eminence and the orientation of the jaw closers to potentially contribute to hypermobility disorders. Using cone-beam computed tomography (CBCT), we constructed patient-specific models of the masticatory system to incorporate these aspects. It is not known whether the clinical diagnosis of hypermobility disorders is associated with the prediction of hypermobility by a patient-specific biomechanical model. Fifteen patients and eleven controls, matched for gender and age, were enrolled in the study. Clinical diagnosis was performed according to the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) and additional testing to differentiate hypermobility from disc displacements. Forward simulations with patient-specific biomechanical models were performed for maximum opening and subsequent closing of the jaw. This predicted a hypermobility disorder (luxation) or a control (normal closing). We found no association between the clinical diagnosis and predictions of hypermobility disorders. The biomechanical models overestimated the number of patients, yielding a low specificity. The role of the collagenous structures remains unclear; therefore, the articular disc and the ligaments should be modelled in greater detail. This also holds for the fanned shape of the temporalis muscle. However, for the osseous structures, we determined post hoc that the anterior slope angle of the articular eminence is steeper in patients than in controls.

Diagnosis of disk displacement using real-time MRI: Clinical report of two patients.

The clinical application of real-time magnetic resonance imaging (MRI) for the diagnosis of temporomandibular joint disk displacement (DD) with and without reduction is presented. In 2 patients with presumed DD, real-time MRI at 15 frames per second was performed during the natural opening and closing of the mouth. In one patient unilateral DD with reduction and in the other patient bilateral DD without reduction were observed. In contrast with conventional static MRI, real-time MRI moving images of temporomandibular joint DD offer comprehensive information about the dynamics of all involved structures, which in turn promises more reliable diagnoses. Real-time MRI is more rapid, more reliable, more informative, and less stressful for patients with temporomandibular disorders (TMDs).

TMJ energy densities in healthy men and women.

OBJECTIVE: Cartilage fatigue, due to mechanical work, may account for the early development of degenerative joint disease (DJD) in the temporomandibular joint (TMJ), and why women are three times more likely to be afflicted. This study tested for gender differences in mechanical energy densities in women and men with healthy TMJs. DESIGN: Eighteen women and eighteen men gave informed consent. Research diagnostic criteria including imaging were used to ensure that subjects' TMJs were normal, without disc displacement or signs of DJD. Numerical modeling determined TMJ loads (Fnormal). Jaw tracking and three-dimensional dynamic stereometry characterized individual-specific data of stress-field dynamic mechanics during 10 symmetrical jaw closing cycles. These data were used to estimate tractional forces (Ftraction). Energy densities were then calculated, where: Energy Density = W/Q (W = work done or mechanical energy input = Ftraction*distance of stress-field translation, Q = volume of cartilage). Two-way analysis of variance (ANOVA) and follow-up two-group comparisons tested mean energy densities for ipsilateral and contralateral TMJs in women vs men. RESULTS: Mean energy densities ± standard deviations in ipsilateral and contralateral TMJs in women were 9.0 ± 9.7 and 8.4 ± 5.5 mJ/mm3, respectively, and were significantly larger (P = 0.004 and 0.001, respectively) compared to ipsilateral and contralateral TMJs in men, which were 5.6 ± 4.2 and 6.3 ± 4.2 mJ/mm3, respectively. CONCLUSIONS: Energy densities were significantly larger in healthy TMJs of women than men. Larger TMJ energy densities during normal jaw functions could predispose earlier mechanical fatigue of the TMJ disc.

Fluid pressurization and tractional forces during TMJ disc loading: A biphasic finite element analysis.

OBJECTIVES: To investigate the ploughing mechanism associated with tractional force formation on the temporomandibular joint (TMJ) disc surface. SETTING AND SAMPLE POPULATION: Ten left TMJ discs were harvested from 6- to 8-month-old male Yorkshire pigs. MATERIALS AND METHODS: Confined compression tests characterized mechanical TMJ disc properties, which were incorporated into a biphasic finite element model (FEM). The FEM was established to investigate load carriage within the extracellular matrix (ECM) and the ploughing mechanism during tractional force formation by simulating previous in vitro plough experiments. RESULTS: Biphasic mechanical properties were determined in five TMJ disc regions (average±standard deviation for aggregate modulus: 0.077±0.040 MPa; hydraulic permeability: 0.88±0.37×10-3 mm4 /Ns). FE simulation results demonstrated that interstitial fluid pressurization is a dominant loading support mechanism in the TMJ disc. Increased contact load and duration led to increased solid ECM strain and stress within, and increased ploughing force on the surface of the disc. CONCLUSION: Sustained mechanical loading may play a role in load carriage within the ECM and ploughing force formation during stress-field translation at the condyle-disc interface. This study further elucidated the mechanism of ploughing on tractional force formation and provided a baseline for future analysis of TMJ mechanics, cartilage fatigue and early TMJ degeneration.

Viscoelastic shear properties of porcine temporomandibular joint disc.

OBJECTIVES: To investigate the intrinsic viscoelastic shear properties in porcine TMJ discs. MATERIALS AND METHODS: Twelve fresh porcine TMJ discs from young adult pigs (6-8 months) were used. Cylindrical samples (5 mm diameter) with uniform thickness (~1.2 mm) were prepared from five regions of the TMJ disc. Torsional shear tests were performed under 10% compressive strain. Dynamic shear was applied in two methods: 1) a frequency sweep test over the frequency range of 0.1-10 rad/s with a constant shear strain amplitude of 0.05 rad and 2) a strain sweep test over the range of 0.005-0.15 rad at a constant frequency of 10 rad/s. Transient stress relaxation tests were also performed to determine the equilibrium shear properties. RESULTS: As the frequency increased in the frequency sweep test, the dynamic shear complex modulus increased, with values ranging from 7 to 17 kPa. The phase angle, ranging from 11 to 15 degrees, displayed no pattern of regional variation as the frequency increased. The dynamic shear modulus decreased as the shear strain increased. The equilibrium shear modulus had values ranging from 2.6 to 4 kPa. The posterior region had significantly higher values for dynamic shear modulus than those in the anterior region, while no significant regional difference was found for equilibrium shear modulus. CONCLUSION: Our results suggest that the intrinsic region-dependent viscoelastic shear characteristics of TMJ disc may play a crucial role in determining the local strain of the TMJ disc under mechanical loading.

Evolution of occlusion and temporomandibular disorder in orthodontics: Past, present, and future.

Occlusion has been an important consideration in orthodontics since the beginning of the discipline. Early emphasis was placed on the alignment of the teeth, the stability of the intercuspal position, and the esthetic value of proper tooth positioning. These factors remain important to orthodontists, but orthopedic principles associated with masticatory functions must also be considered. Orthopedic stability in the masticatory structures should be a routine treatment goal to help reduce risk factors associated with developing temporomandibular disorders.

[Dissertations 25 years after date 43. Temporomandibular joint dysfunction and condylar resorption following orthognathic surgery]. / Proefschriften 25 jaar na dato 43. Disfunctie van het kaakgewricht en condylaire resorptie na orthognatische chirurgie.

A surgical-orthodontic treatment has a direct influence on a patient's skeletal, dental, functional and psychological factors. A variety of surgical and anatomical factors determine the result of this complex treatment. Risk factors are a retrognathy with a steep mandibular angle, and the anatomy of the mandibular condyles and the fossa. The customary surgical techniques have an enhancing influence on the function of the temporomandibular joint. The role of the position of the articular disc remains unclear. Since 1989, more insight has gradually been gained in the aspects having an influence on the function of the temporomandibular joint following orthognathic surgery.

Effect of pre-stress on the dynamic tensile behavior of the TMJ disc.

Previous dynamic analyses of the temporomandibular joint (TMJ) disc have not included a true preload, i.e., a step stress or strain beyond the initial tare load. However, due to the highly nonlinear stress-strain response of the TMJ disc, we hypothesized that the dynamic mechanical properties would greatly depend on the preload, which could then, in part, account for the large variation in the tensile stiffnesses reported for the TMJ disc in the literature. This study is the first to report the dynamic mechanical properties as a function of prestress. As hypothesized, the storage modulus (E') of the disc varied by a factor of 25 in the mediolateral direction and a factor of 200 in the anteroposterior direction, depending on the prestress. Multiple constant strain rate sweeps were extracted and superimposed via strain-rate frequency superposition (SRFS), which demonstrated that the strain rate amplitude and strain rate were both important factors in determining the TMJ disc material properties, which is an effect not typically seen with synthetic materials. The presented analysis demonstrated, for the first time, the applicability of viscoelastic models, previously applied to synthetic polymer materials, to a complex hierarchical biomaterial such as the TMJ disc, providing a uniquely comprehensive way to capture the viscoelastic response of biological materials. Finally, we emphasize that the use of a preload, preferably which falls within the linear region of the stress-strain curve, is critical to provide reproducible results for tensile analysis of musculoskeletal tissues. Therefore, we recommend that future dynamic mechanical analyses of the TMJ disc be performed at a controlled prestress corresponding to a strain range of 5­10%.

Stress analysis of temporomandibular joint disc during maintained clenching using a viscohyperelastic finite element model.

PURPOSE: People with bruxism exert parafunctional grinding and clenching activities. Those habits are suspected to be associated with temporomandibular disorder development. The aim of this study was to analyze the behavior of the temporomandibular joint disc under maintained clenching. MATERIALS AND METHODS: For this analysis, a viscohyperelastic finite element model was used. The model included half the mandible, the left disc, and the left temporal bone and used muscular efforts as loading conditions. The viscohyperelastic properties of the disc were based on literature data from asymptomatic human cadaveric disc specimens. RESULTS: Stresses in the disc decreased slightly (<15%) after 10 seconds of maintained clenching. In contrast, strains increased in nearly all disc regions, with the maximum (33%) in the lateral part of the disc. The greatest creep strain (-0.1) also was found in the lateral part. CONCLUSION: Results suggest that maintained clenching leads to an increase in strains in the entire disc and to greater creep strain in the lateral part. This may be related to disc damage.

Sensitivity of quantitative UTE MRI to the biomechanical property of the temporomandibular joint disc.

PURPOSE: To quantify MR properties of discs from cadaveric human temporomandibular joints (TMJ) using quantitative conventional and ultrashort time-to-echo magnetic resonance imaging (UTE MRI) techniques and to corroborate regional variation in the MR properties with that of biomechanical indentation stiffness. METHODS: This study was exempt from the institutional review board approval. Cadaveric (four donors, two females, 74 ± 10.7 years) TMJs were sliced (n = 14 slices total) sagittally and imaged using quantitative techniques of conventional spin echo T2 (SE T2), UTE T2*, and UTE T1rho. The discs were then subjected to biomechanical indentation testing, which is performed by compressing the tissue with the blunt end of a small solid cylinder. Regional variations in MR and indentation stiffness were correlated. TMJ of a healthy volunteer was also imaged to show in vivo feasibility. RESULTS: Using the ME SE T2 and the UTE T1rho techniques, a significant (each p < 0.0001) inverse relation between MR and indentation stiffness properties was observed for the data in the lower range of stiffness. However, the strength of correlation was significantly higher (p < 0.05) for UTE T1rho (R(2) = 0.42) than SE T2 (R(2) = 0.19) or UTE T2* (R(2) = 0.02, p = 0.1) techniques. CONCLUSION: The UTE T1rho technique, applicable in vivo, facilitated quantitative evaluation of TMJ discs and showed a high sensitivity to biomechanical softening of the TMJ discs. With additional work, the technique may become a useful surrogate measure for loss of biomechanical integrity of TMJ discs reflecting degeneration.

The effect of bolus properties on muscle activation patterns and TMJ loading during unilateral chewing.

Mastication is a vital human function and uses an intricate coordination of muscle activation to break down food. Collection of detailed muscle activation patterns is complex and commonly only masseter and anterior temporalis muscle activation are recorded. Chewing is the orofacial task with the highest muscle forces, potentially leading to high temporomandibular joint (TMJ) loading. Increased TMJ loading is often associated with the onset and progression of temporomandibular disorders (TMD). Hence, studying TMJ mechanical stress during mastication is a central task. Current TMD self-management guidelines suggest eating small and soft pieces of food, but patient safety concerns inhibit in vivo investigations of TMJ biomechanics and currently no in silico model of muscle recruitment and TMJ biomechanics during chewing exists. For this purpose, we have developed a state-of-the-art in silico model, combining rigid body bones, finite element TMJ discs and line actuator muscles. To solve the problems regarding muscle activation measurement, we used a forward dynamics tracking approach, optimizing muscle activations driven by mandibular motion. We include a total of 256 different combinations of food bolus size, stiffness and position in our study and report kinematics, muscle activation patterns and TMJ disc von Mises stress. Computed mandibular kinematics agree well with previous measurements. The computed muscle activation pattern stayed stable over all simulations, with changes to the magnitude relative to stiffness and size of the bolus. Our biomedical simulation results agree with the clinical guidelines regarding bolus modifications as smaller and softer food boluses lead to less TMJ loading. The computed mechanical stress results help to strengthen the confidence in TMD self-management recommendations of eating soft and small pieces of food to reduce TMJ pain.

Alterations in intermediate filaments expression in disc cells from the rat temporomandibular joint following exposure to continuous compressive force.

The articular disc in the temporomandibular joint (TMJ) that serves in load relief and stabilizing in jaw movements is a dense collagenous tissue consisting of extracellular matrices and disc cells. The various morphological configurations of the disc cells have given us diverse names, such as fibroblasts, chondrocyte-like cells and fibrochondrocytes; however, the characteristics of these cells have remained to be elucidated in detail. The disc cells have been reported to exhibit heterogeneous immunoreaction patterns for intermediate filaments including glial fibrillary acidic protein (GFAP), nestin and vimentin in the adult rat TMJ. Because these intermediate filaments accumulate in the disc cells as tooth eruption proceeds during postnatal development, it might be surmised that the expression of these intermediate filaments in the disc cells closely relates to mechanical stress. The present study was therefore undertaken to examine the effect of a continuous compressive force on the immunoexpression of these intermediate filaments and an additional intermediate filament - muscle-specific desmin - in the disc cells of the TMJ disc using a rat experimental model. The rats wore an appliance that exerts a continuous compressive load on the TMJ. The experimental period with the appliance was 5 days as determined by previous studies, after which some experimental animals were allowed to survive another 5 days after removal of the appliance. Histological observations demonstrated that the compressive force provoked a remarkable acellular region and a decrease in the thickness of the condylar cartilage of the mandible, and a sparse collagen fiber distribution in the articular disc. The articular disc showed a significant increase in the number of desmin-positive cells as compared with the controls. In contrast, immunopositive cells for GFAP, nestin and vimentin remained unchanged in number as well as intensity. At 5 days after removal of the appliance, both the disc and cartilage exhibited immunohistological and histological features in a recovery process. These findings indicate that the mature articular cells are capable of producing desmin instead of the other intermediate filaments against mechanical stress. The desmin-positive disc cells lacked α-smooth muscle actin (α-SMA) in this study, even though desmin usually co-exists with α-SMA in the vascular smooth muscle cells or pericytes. Because the precursor of a pericyte has such an immunoexpression pattern during angiogenesis, there is a further possibility that the formation of new vessels commenced in response to the extraordinary compressive force.

Inductive, scaffold-based, regenerative medicine approach to reconstruction of the temporomandibular joint disk.

PURPOSE: A device composed of extracellular matrix (ECM) was investigated as an inductive template in vivo for reconstruction of the temporomandibular joint (TMJ) disk after discectomy. MATERIALS AND METHODS: A scaffold material composed of porcine-derived ECM was configured to mimic the shape and size of the TMJ. This device was implanted in a canine model of bilateral TMJ discectomy. After discectomy, 1 side was repaired with an ECM scaffold material and the contralateral side was left empty as a control. At 6 months after implantation, the joint space was opened, the joints were evaluated for signs of gross pathologic degenerative changes, and newly formed tissue was excised for histologic, biochemical, and biomechanical analysis. RESULTS: The results showed that implantation of an initially acellular material supported the formation of site-appropriate, functional host tissue that resembled that of the native TMJ disk. Furthermore, this prevented gross degenerative changes in the temporal fossa and mandibular condyle. No tissue formation and mild to severe gross pathologic changes were observed in the contralateral controls. CONCLUSIONS: These results suggest that an ECM-based bioscaffold could represent an off-the-shelf solution for TMJ disk replacement.

Stress distribution in the temporo-mandibular joint discs during jaw closing: a high-resolution three-dimensional finite-element model analysis.

PURPOSE: This study aims at analysing the stresses distribution in the temporomandibular joint (TMJ) using a complete high-resolution finite element model (FE Model). This model is used here to analyse the stresses distribution in the discs during a closing jaw cycle. In the end, this model enables the prediction of the stress evolution in the TMJ disc submitted to various loadings induced by mandibular trauma, surgery or parafunction. MATERIALS AND METHODS: The geometric data for the model were obtained from MRI and CT scans images of a healthy male patient. Surface and volume meshes were successively obtained using a 3D image segmentation software (AMIRA(®)). Bone components of skull and mandible, both of joint discs, temporomandibular capsules and ligaments and dental arches were meshed as separate bodies. The volume meshes were transferred to the FE analysis software (FORGE(®)). Material properties were assigned for each region. Boundary conditions for closing jaw simulations were represented by different load directions of jaws muscles. The von Mises stresses distribution in both joint discs during closing conditions was analyzed. RESULTS: The pattern of von Mises stresses in the TMJ discs is non-symmetric and changed continuously during jaw movement. Maximal stress is reached on the surface disc in areas in contact with others bodies. CONCLUSIONS: The three-dimension finite element model of masticatory system will make it possible to simulate different conditions that appear to be important in the cascade of events leading to joint damage.

Experimental study of eigenstrains in temporomandibular joint discs using digital image analysis.

The temporomandibular joint is one of the most frequently used joints of the human body. Its malfunction can severely influence patient's well-being. Since the temporomandibular joint disc plays a major role in its functioning, especially in load distribution within the joint, it appears to be a crucial element to understand. This paper aims to improve understanding of the tissues within close in vivo conditions (i.e. hydrated at 37 ° C) by (i) comforting literature by revealing the presence of residual stresses within the temporomandibular joint disc, (ii) quantifying eigenstrains through a relaxation process and finally (iii) evaluating the internal mechanical state in intact temporomandibular joint discs central part, considering the tissue as a thin layer. Both global specimen size measurements and local digital image correlation were used to quantify 6 samples' deformation through a detailed analysis of approximately 30 images, recorded for approximately one hour, per disc. Thanks to a backward time approach combined to an analytical model, eigenstrains were assessed on discs. For the first time, the presence of complex initial strain fields within cylindrical specimens of porcine temporomandibular joint discs was quantified, confirming indications from literature. Digital image analysis revealed the partial internal stress release through specimen self-deformation. Close to zero in central part, it reached approximately 13% radial strain in the outer ring within a characteristic relaxation time close to 530s. The principal strains' distribution agrees with the alignment of the collagen fibers in the central part of the discs revealed in many works. It led to deduce that, in the central area of the discs, the matrix undergoes a radial compression within physiological conditions to compensate the daily loading stresses. Therefore, this work improves understanding of the tissues in vivo conditions highlighting extraction cut effect on temporomandibular joint disc's tissues mechanical state.

Decellularized small intestine submucosa device for temporomandibular joint meniscus repair: Acute timepoint safety study.

Temporomandibular joint (TMJ) Meniscus removal is an option for the patient to regain full range of motion if the disc is irreversibly damaged or unable to be reduced. However, this procedure leaves the joint vulnerable to condylar remodeling and degeneration. We have shown that extracellular matrix (ECM) scaffolds remodel into a tissue with near native TMJ meniscus in previous studies. The next step towards clinical translation is to manufacture the ECM scaffold as a device under good manufacturing practices (GMP) and test it in a pre-clinical animal study under good laboratory practices (GLP). The primary objective of this study was to evaluate the in-vivo histopathological response to a Prototype GMP manufactured device made of decellularized porcine small intestinal submucosa (SIS), by observing for signs of surrounding tissue reaction to the device that are indicative of an adverse host response in comparison to an empty control at 21 days post-surgical implantation in a canine TMJ meniscus removal and implant model in a GLP setting. The conclusive findings were that the ECM device is safe for placement in the TMJ. After 21 days post implantation, histology of tissue surrounding the device and draining lymph nodes showed that the Prototype GMP device had no negative effects compared to the empty site (as evaluated by the board-certified veterinary pathologist). Furthermore, there was a lack of negative findings for clinical pathology (hematology and clinical chemistry), mortality, and body weight/weight change. Future studies will go to one year after implantation to show that the remodel device remains as a viable tissue with near native mechanical properties.

Magnetic resonance imaging of the temporomandibular joint disc: feasibility of novel quantitative magnetic resonance evaluation using histologic and biomechanical reference standards.

AIMS: To use the ultrashort time-to-echo magnetic resonance imaging (UTE MRI) technique to quantify short T2* properties (obtained through gradient echo) of a disc from the human temporomandibular joint (TMJ) and to corroborate regional T2* values with biomechanical properties and histologic appearance of the discal tissues. METHODS: A cadaveric human TMJ was sliced sagittally and imaged by conventional and UTE MRI techniques. The slices were then subjected to either biomechanical indentation testing or histologic evaluation, and linear regression was used for comparison to T2* maps obtained from UTE MRI data. Feasibility of in vivo UTE MRI was assessed in two human volunteers. RESULTS: The UTE MRI technique of the specimens provided images of the TMJ disc with greater signal-to-noise ratio (~3 fold) and contrast against surrounding tissues than conventional techniques. Higher T2* values correlated with lower indentation stiffness (softer) and less collagen organization as indicated by polarized light microscopy. T2* values were also obtained from the volunteers. CONCLUSION: UTE MRI facilitates quantitative characterization of TMJ discs, which may reflect structural and functional properties related to TMJ dysfunction.