Morphological and Dimensional Analysis of the Nasopalatine Canal: Insights from Cone-Beam Computed Tomography Imaging in a Large Cohort.

BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.

Impact of Denture Use on Oral Health-Related Quality of Life in Yemeni Patients: A Cross-Sectional Analysis.

BACKGROUND We used the 14-item Oral Health Impact Profile-14 (OHIP-14) questionnaire to evaluate the association between sociodemographic variables and oral health-related quality of life in 241 wearers of removable partial or complete dentures attending a single center in Yemen. MATERIAL AND METHODS A total of 241 partial dentures (PD) and complete dentures (CD) wearers were enrolled from the Department of Prosthodontics at the Faculty of Dentistry, Sana'a University, and the University of Science and Technology. Data were collected before the commencement of denture wearing and after 3-6 months of denture use. The questionnaire consisted of sociodemographic information and denture type, and another for the OHIP to assess oral health-related quality of life (OHRQoL), oral health impact profile scale comprises 7 subscales, each evaluating different aspects of oral health and functionality. Descriptive statistics were calculated for participants. Independent t tests were performed to compare different patient groups, focusing on PD and CD wearers. Paired-sample t tests were used to examine changes within patient groups before and after removable denture use. RESULTS Among all participants, 67.6% were male, wearers of CDs were 74.6% male, PDs were 58.3%, and was consistent for CD (71.0%) and PD (72.8%) wearers. The wearing prostheses significantly impacted the OHRQoL of patients using both PDs and CDs (P<0.01). Among CD wearers, 4 of these subscales (3-6) were statistically significant, but the handicaps subscale showed evident reductions in physical pain after treatment among PD wearers. CONCLUSIONS Wearing dentures positively affects the OHRQoL of patients, influencing various aspects of their health, including functional, physical, psychological, and social well-being.

A Systematic Review of Publications on Perceptions and Management of Chronic Medical Conditions Using Telemedicine Remote Consultations by Primary Healthcare Professionals April 2020 to December 2021 During the COVID-19 Pandemic.

Telemedicine technologies allow distribution of health-related services and information and can include electronic and telecommunication technologies, remote patient and clinician contact, referral and prescribing, patient education, and monitoring. This systematic review aimed to evaluate publications on the perceptions and management of chronic medical conditions using telehealth remote consultations by primary healthcare professionals between April 2020 and December 2021 during the COVID-19 pandemic. Electronic databases, including Cinhal, PubMed, Science Direct, and ProQuest were searched to extract qualitative studies relevant to the topic. Inclusion criteria were developed based on the Population, Exposure, and Outcomes scoping framework. The target population was healthcare professionals working in primary care settings. Included studies encompassed various types of telemedicine, such as synchronous telemedicine, video conferencing, telephone conversations, and smart devices. Eight studies were included. Synchronous telemedicine was highly effective in ensuring the continuity of care and treatment, providing patients with convenience, improved access to treatment, and earlier disease management. Video conferencing and telephone consultations were the most common methods used. Challenges included concerns about patient privacy, technology literacy, and acceptance. Telemedicine was commended for its ability to provide access to immediate expert medical advice and eliminate the need for long-distance travel, contributing to increased patient compliance. Synchronous telemedicine is a promising solution for managing chronic conditions during and after the COVID-19 pandemic, offering benefits to patients and healthcare professionals. To maximize its potential, concerns regarding patient privacy, confidentiality, and technology literacy need to be addressed. Proper legislation and regulations are required for long-term success of telemedicine, making it a valuable component of healthcare systems.

Comparative Analysis of Calcium and Hydroxyl Ion Release from Pulp Dressing Materials in Pulpotomized Premolars.

BACKGROUND The aim of this study was to evaluate the time-dependent release of calcium (Ca⁺⁺) and hydroxyl (OH⁻) ions from 3 different pulp dressing materials used to cap root canal orifices in pulpotomized premolars. MATERIAL AND METHODS Freshly extracted (n=40) premolars were subjected to standardized pulpotomy procedure and finally restored in 5 groups using resin-modified glass ionmmer liner (RMGI) and bonded resin composite directly against the pulp chamber's floor (Control, G2) and over 3 different orifices' capping materials - Dycal (G3), Endo Sequence root repair material (ESRRM, G4), and mineral trioxide aggregate (MTA) Angelus (G5). Another 10 sound premolars served as the Reference group (G1). The restored teeth were incubated at 37±1°C in sealed containers filled with deionized water to assess Ca⁺⁺ and OH⁻ ions release after 24 h and at 1, 4, and 8 weeks. Two-way ANOVA and Tukey's comparisons at alpha=0.05 were used to statistically analyze the collected data. RESULTS Two-way ANOVA revealed significant differences in Ca⁺⁺ ions between test groups at different testing time intervals (P<0.05). Despite the constant (Tukey's, P<0.05) pH levels (OH⁻ release), Group 5 specimens exhibited higher Ca⁺⁺ ion release in comparison to Groups 4 and 3 at different testing timepoints (Tukey's, P<0.05). CONCLUSIONS Although all the assessed pulp dressing materials had equivalent and stable pH levels, ESRRM and MTA-Angelus had the highest Ca⁺⁺ ion release at the assessment intervals.

Comparative Evaluation of Digital Cephalometric Tracing Applications on Mobile Devices and Manual Tracing.

BACKGROUND Cephalometric radiography evaluates facial skeleton development and aids in diagnosis and treatment phases (pre and post) in orthodontics. This study aimed to compare digital cephalometric tracing using a smartphone application (App), a tablet-based platform, and manual tracing in 30 orthodontic patients. MATERIAL AND METHODS Thirty orthodontic pretreatment, criteria based, lateral cephalometric radiographs were analyzed/grouped for Steiner analysis parameters (5 skeletal, 3 dentals, 1 soft tissue) by 3 tracing methods [manual - group (Gp M), smartphone (Android - OS9) - Gp S, tablet (Apple - IOS13) - Gp T) after mandatory standardization/calibration. Measurements include 5 angular (SNA, SNB, ANB, SNMPA, SNOP), 3 linear U1NA, L1NB, U1L1, and 1 soft tissue (S line) (millimeters and degrees). Inter-examiner rating was determined using Dahlberg's test. After normality distribution testing (Shapiro-Wilk), data were analyzed using one-way analysis of variance (ANOVA) for group differences. Homogeneity of variance was verified using the Levene test. Differences were determined on probability value of (p≤0.05). RESULTS The results showed that Steiner's analysis parameters were similar in all groups with homogenous variances. Highest differences in mean values were found for L1NB, U1L1, and S line measurement, with higher values being observed in Gp S tracings. However, these differences were not statistically significant (p≤0.05). All parameters, irrespective of being measured in either degrees or millimeters, had means comparable to each other. CONCLUSIONS Smartphone and tablet-based applications produced tracings that were comparable and reliable when compared to conventional manual tracings. Standardization of images, processing, printing, and calibration of devices is important to achieve good results.

Clinical Performance of Glass Ionomer Cement in Load-Bearing Restorations: A Systematic Review.

Glass ionomer cement (GIC) is a self-adhesive dental restorative material composed of a polyacrylic acid liquid and fluoro-aluminosilicate glass powder. It is commonly used for cementation during dental restoration. This study aimed to systematically review the existing literature regarding the clinical performance of GIC in load-bearing dental restorations. A comprehensive literature search was conducted in EBSCO, PubMed, Embrace, and Cochrane databases. Only randomized controlled trials (RCTs) were included in the search, and a broad search technique was used, where inclusion and exclusion criteria were applied. After a thorough evaluation, 12 RCTs were extensively reviewed, and whether GIC is suitable for load-bearing restorations was determined. Significant variations in staining surface or margin, color match, translucency, esthetic anatomical form, retention, material fracture, marginal adaptation, surface luster, occlusal contour, wear, and approximal anatomical form indicated the unsuitability of GIC. By contrast, significance differences in patient view and periodontal response indicated that GIC is suitable. No significant differences in postoperative sensitivity, recurrence of caries, or tooth integrity were observed. Nevertheless, the results of the review demonstrated that the clinical performance of GIC is comparable to that of traditional restorative materials with regard to the parameters analyzed. GIC is a suitable restorative material for load-bearing restorations regarding surface margin, esthetic anatomical form, material retention and fracture, marginal adaptation, occlusal contour, wear, and approximal anatomical form. It reduces other parameters, such as postoperative sensitivity, recurrence of caries, and tooth integrity.

Nanoparticle Augmentation of Adhesive Systems: Impact on Tensile Strength in Fiberglass Post Placement within Root Dentin.

BACKGROUND Modification of the glass fiber post (GFP) with titanium dioxide or silver particles can improve the durability and reliability of dental treatments for ensuring long-term success. This research assessed the tensile bond strength (TBS) of an adhesive system used for cementing GFPs into root dentin following the incorporation of nanoparticles of titanium dioxide (NTiO2) and silver (NAg). MATERIAL AND METHODS Sixty human maxillary canines were prepared to create a 10-mm intra-radicular space for post placement from the cementoenamel junction. The specimens were randomly allocated into 2 groups (a non-thermocycling group and a thermocycling group). Each group was divided into 3 subgroups (10 samples each) according to the adhesive system used (adhesive system devoid of any addition, adhesive system including 1% NAg, and adhesive system infused with 1% NTiO2). TBS tests were conducted and recorded in MPa using a Universal Testing Machine, with an axial load applied at a rate of 0.5 mm/min until failure. The TBS for both groups (non-thermocycling and thermocycling) was measured in megapascals (MPa), and the failure type was recorded. The data were statistically analyzed using one-way analysis of variance (ANOVA) and Tukey's test with P.

Radiographic Assessment of 121 Glass Fiber Post Procedures in 32 Patients Aged 21-60 Years Performed by 6th-Year Dental Students During the 2022-2023 Academic Year at the College of Dentistry, Jazan University, Saudi Arabia.

BACKGROUND The restoration of endodontically treated teeth (ETT) and severely damaged teeth has been a concern of clinicians. Glass Fiber Post (GFPs) combine the strength of carbon fiber posts with the esthetic appearance of glass to resemble natural dentin during dental restoration procedures. This radiographical study assessed the GFP carried out by students enrolled in the Clinical Comprehensive Course at the College of Dentistry, Jazan University. MATERIAL AND METHODS A total of 32 patients treated by 18 6th-year dental students with 121 GFPs were assessed in this cross-sectional radiographic study. The assessment covered tooth type, arch, post-to-root width, length of post in relation to the crown and root lengths, amount of remaining gutta percha (GP), and gap between GP and post. Data were analyzed using SPSS, and associations between variables were determined using the chi-square test. RESULTS Maxillary teeth were the most frequently restored with posts (88.4%) with most being (58.7%) anterior teeth, and 50.4% of posts had widths that were one-third that of the root. The percentage of posts was twice (71.1%) or equal to (26.4%) the crown length, whereas two-thirds of the tested GFPs were >5 mm of the remaining GP. Significant differences were observed in location and position of teeth with post width, post length in relation to crown or root length, and amount of remaining GP, with P values of 0.018, 0.000, and 0.001, respectively. CONCLUSIONS The assessed radiographs revealed that the performance of sixth year students in accomplishment GFP radiographically was satisfactory and within the values recommended in the literature.

Factors Influencing Dentists' Choice of Restorative Materials for Single-Tooth Crowns: A Survey Among Saudi Practitioners.

BACKGROUND Material selection is crucial in restorative dentistry, influenced by aesthetics, material properties, and tooth location. This understanding is key for advancing dental practices and patient outcomes. The present study aimed to assess dentists' preferences for restorative materials in single-tooth crowns (SC) and how abutment tooth location and preparation margins influence these choices. MATERIAL AND METHODS A web-based pre-validated questionnaire survey was conducted among 811 actively practicing dentists in Saudi Arabia. RESULTS In posterior teeth, we found that ceramic was the most preferred material for SC regardless of the abutment tooth location and location of margins, followed by porcelain fused to metal (PFMs). In anterior teeth, ceramics were preferred, followed by CAD/CAM-based resin SC. Among the choice of ceramics in teeth for both supra-gingival margins, monolith zirconia was the most-preferred material for SC fabrication in posterior teeth, followed by zirconia-reinforced lithium silicate ceramic. Similarly, for sub-gingival margins, monolith zirconia crowns were the most popular option in posterior teeth among the respondents, with the highest in the mandibular molar region. In the anterior region, layered zirconia was the least preferred, and lithium disilicate ceramics was the most-favored option. A statistically significant difference existed between supra- and subgingival preparation for teeth 11 (P=0.01), 16 (P=0.03), and 34 (P=0.02). CONCLUSIONS Ceramic was the material of choice among Saudi dentists for replacement of SC, irrespective of the location and preparation margin. Monolith zirconia was usually selected for posterior teeth and lithium disilicate ceramics was the top choice in anterior teeth.

Knowledge, Awareness, and Use of Stainless-Steel Crowns Among Dental Professionals in Sana'a City, Yemen.

BACKGROUND Stainless-steel crowns (SSCs) have been the most effective and efficient methods of tooth restoration in pediatric dentistry, and they have shown consistently high success rates. This study aimed to evaluate the knowledge, awareness, and practice of SSCs among dental professionals in Sana'a City, Yemen. MATERIAL AND METHODS A modified questionnaire was prepared from previous similar studies and distributed to 700 participants. It consisted of 3 parts: the first was related to participant characteristics; the second consisted of questions related to knowledge and awareness of SSCs such as indications, advantages, challenges, and parent's rejection to SSCs; and the third part was correlated to questions related to the use and practice of SSCs, number of children treated, and SSCs cemented per week. Statistical significance was determined using a chi-square test, and the P value was set at <0.05 for statistical significance. RESULTS A total of 604 dental professionals answered the questionnaire, 159 (26.3%) had used SSC restoration, and 12 (80.0%) of them had a degree in pediatric dentistry, with significant differences among participants (P<0.000). Respondents with higher academic qualifications recorded higher percentages in using SSCs during their clinics, with significant differences (P<0.005). A significant difference was detected between general practitioners and pedodontists in practice questions (P=0.000). Most of the respondents (78.8%) indicated a desire for more practice and hands-on training in use of SSCs. CONCLUSIONS General dentists in Sana'a City, Yemen, do not frequently use SSCs. Most of the respondents stated that they lacked practical training and expressed a need for further knowledge and continuing education.

Quality of Root Canal Fillings and Procedural Errors for In Vivo Studies Prepared in Different Clinical Settings and with Rotary Systems: A Systematic Review.

BACKGROUND This systematic review of the literature aimed to identify published studies and evaluate them on the quality of root canal fillings (RCF) and procedural errors with rotary systems for in vivo studies prepared for different clinical settings. MATERIAL AND METHODS A full literature exploration was conducted in Clarivate Analytics' Web of Science, Elsevier's Scopus, Embase, and PubMed for studies published between January 2020 and March 2024. A manual search was also performed by reviewing the references of selected papers. The following keywords were used: quality of root canal filling(s) OR quality of root canal obturation, root canal obturation OR endodontic treatment, clinical setting (academic, private, governmental), AND/OR procedural errors and rotary instrumentation. RESULTS Sixteen clinical studies were included in this review. The acceptance percentages for obturation length, density, and taper were 76.3%, 74.7%, and 82.5%, respectively, indicating significantly high, good ratios. The overall RCF recorded showed that 68.2% of root canal obturations were considered acceptable. Acceptable rates remained higher than unacceptable rates in academic, hospital, and private settings, and percentages ranged from 65.2% to 93.0%. Only 5 studies reported procedural errors, namely, ledge formation, separated instruments, apical perforation, transportation, lateral perforation, and root/foramen perforation. CONCLUSIONS Using rotary instruments for different root canal treatment steps as instrumentation and obturations is highly recommended. Among different clinical setting and practice, these instruments resulted in a good and acceptable RCF, overall quality performed by those instruments, and few procedural errors.

Unveiling Therapeutic Potential: Targeting Fusobacterium nucleatum's Lipopolysaccharide Biosynthesis for Endodontic Infections-An In Silico Screening Study.

Complex microbial communities have been reported to be involved in endodontic infections. The microorganisms invade the dental pulp leading to pulpitis and initiating pulp inflammation. Fusobacterium nucleatum is a dominant bacterium implicated in both primary and secondary endodontic infections. Drugs targeting the molecular machinery of F. nucleatum will minimize pulp infection. LpxA and LpxD are early acyltransferases involved in the formation of lipid A, a major component of bacterial membranes. The identification of leads which exhibit preference towards successive enzymes in a single pathway can also prevent the development of bacterial resistance. A stringent screening strategy utilizing physicochemical and pharmacokinetic parameters along with a virtual screening approach identified two compounds, Lomefloxacin and Enoxacin, with good binding affinity towards the early acyltransferases LpxA and LpxD. Lomefloxacin and Enoxacin, members of the fluoroquinolone antibiotic class, exhibit wide-ranging activity against diverse bacterial strains. Nevertheless, their effectiveness in the context of endodontic treatment requires further investigation. This study explored the potential of Lomefloxacin and Enoxacin to manage endodontic infections via computational analysis. Moreover, the compounds identified herein serve as a foundation for devising novel combinatorial libraries with enhanced efficacy for endodontic therapeutic strategies.

Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series.

AIM: This case series was to describe the use of surgical extrusion for three different cases as a technique to re-establish the biological width in patients with insufficient crown height. BACKGROUND: Surgical extrusion serves as an important means to reestablishing a proper biological width. Such method provides an excellent alternative for the restoration of teeth with insufficient ferrule and ensuring a suitable dental restoration. CASES DESCRIPTIONS: This case series describes the management of three different cases with compromised teeth #25, #35, and #44, respectively. The approach involved the surgical extrusion of the compromised sites from subgingival to supragingival and the splinting of the teeth using a semi-rigid splint. A successful prognosis was observed on follow-up visits. CONCLUSION: This technique is a good alternative for general practitioners because of its easy implementation and time efficiency. In addition, the method requires less equipment and provides for adequate space for the re-establishment of biological width. CLINICAL SIGNIFICANCE: Such technique can re-establish a healthy biological width, the existing occlusion can be maintained without alterations, and it demonstrated the suitability of surgical extrusion technique in such clinical situations. Case selection is equally important. Cases with single-rooted teeth with fractures or caries in proximity to the marginal bone level without vertical root fractures generally provide positive outcomes on providing this treatment. How to cite this article: Boreak N, Al Moaleem MM, Zain AA, et al. Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series. J Contemp Dent Pract 2024;25(6):593-598.

Analysis of Root Canal Characteristics in Permanent Canine Teeth Among 270 Saudi Subjects: A Cone-Beam Computed Tomography Study.

BACKGROUND An understanding of root canal morphology is vital for successful endodontic treatment. However, variations in the root canal system of permanent canines, especially in relation to population-based diversity, are not well-documented. This study thus aimed to analyze the root canal numbers, configurations, and bilateral symmetry in 1080 permanent canine teeth among 270 Saudi individuals using cone-beam computed tomography (CBCT), contributing to the existing body of knowledge and aiding clinicians in devising effective treatment strategies. MATERIAL AND METHODS The CBCT images of 270 participants, encompassing 1080 canines (540 pairs of upper and lower canines), were scrutinized for root and canal counts. Canal configurations were assessed based on Ahmed's and Vertucci's classifications. Bilateral symmetry in these parameters was recorded and the data were statistically analyzed. RESULTS The study revealed variable prevalence of multiple roots and canals in maxillary and mandibular canines. Ahmed's and Vertucci's type I canal configuration was predominantly observed. Notably, significant bilateral symmetry was noted in root and canal numbers, and canal configurations. CONCLUSIONS The most common configuration of permanent canines was a single root and canal, usually adhering to Ahmed's and Vertucci's type I classification. Mandibular canines showed a higher incidence of two canals than two roots. The extent of bilateral symmetry, especially in mandibular canines, could provide valuable insights for better contralateral tooth treatment planning.

Comparative Analysis of Properties in Chairside Silicone Denture Liners versus Heat-Cured Molloplast-B: An In-Depth In Vitro Evaluation.

BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.

Online Questionnaire-Based Study to Evaluate the Attitudes and Use of Rubber Dental Dams by Saudi Dental Practitioners.

BACKGROUND A dental dam is a protective sheet with an aperture and is used to prevent the spread of infection during dental procedures. This study aimed to use a 2-part online questionnaire to evaluate the attitudes and use of rubber dental dams by 300 Saudi dental interns, general dental practitioners, residents, specialists, and consultants in prosthodontics, endodontics, and restorative dentistry. MATERIAL AND METHODS The 17-item validated questionnaire consisted of 5 questions on demographics, 2 on knowledge, 6 on attitudes, and 4 on perceptions. It was distributed through Google Forms. The chi-square test was used to determine the associations between the study variables and perception questions. RESULTS A total of 41.67% participants were specialists/consultants, among which 59.2% were in the prosthodontics specialty, 12.8% in endodontics, and 28% in restorative dentistry. Most participants (84.67%) stated the necessity of using rubber dams during post and core procedures. A total of 53.67% had received enough training for using rubber dams during their undergraduate/residency education. The majority of participants (41%) also preferred using rubber dams during the prefabricated post and core procedures, and 28.33% stated that the remaining tooth structure was one of the major reasons for not using rubber dams during the post and core procedures. CONCLUSIONS Workshops and hands-on training should be conducted among dental graduates to instill a positive attitude regarding the use of rubber dams.

Unlocking Endocrown Restoration Expertise Among Dentists: Insights from a Multi-Center Cross-Sectional Study.

BACKGROUND This study, employing an online questionnaire, aimed to assess and contrast the awareness, knowledge, and perceptions of dentists in Saudi Arabia (SA) regarding endocrowns (EC) as post-endodontic restorations with those of dentists educated in various other countries. MATERIAL AND METHODS We conducted a cross-sectional survey among dental interns and practicing dentists in government facilities, private dental centers, and dental colleges in SA, including participants of diverse nationalities. We disseminated validated, closed-ended questionnaires through WhatsApp via Google Forms. The Chi-square test was applied to assess associations between categorical variables, with a P-value of ≤0.05 indicating statistical significance. RESULTS The majority of participants (61.2%) indicated that EC restorations are best suited for molar teeth. Furthermore, 69.6% asserted that the primary objective of employing EC is to accomplish minimally invasive preparations while preserving the existing tooth structure. Among the responses, 68.3% pinpointed debonding of ECs as a significant cause of failure. Notably, substantial differences were observed in responses concerning the knowledge or practice of EC across various factors such as gender, educational attainment, country of graduation, and workplace. CONCLUSIONS The findings reveal a comparatively low adoption of ECs among the participants, irrespective of experience or country of education. This underscores the need for incorporating ECs into dental curricula through theoretical and clinical discussions or considering them as a subject for post-graduate continuing education programs.

A Comparative Analysis of Marginal Adaptation Values between Lithium Disilicate Glass Ceramics and Zirconia-Reinforced Lithium Silicate Endocrowns: A Systematic Review of In Vitro Studies.

This systematic review aimed to identify and analyze in vitro studies on the marginal adaptation values of computer-aided-design/computer-aided-manufacturing (CAD/CAM) and heat-pressed lithium disilicate glass ceramics and zirconia-reinforced lithium silicates and endocrown restorations. A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: endocrown [(marginal adaption) or (marginal fit) or internal fitting)], endocrown [(molar(s)) or (premolar(s) or (posterior teeth) or (maxillary arch) or (mandibular arch)] and ceramic materials as [(lithium disilicate glass ceramic CAD/CAM) or (zirconia) or (heat-press)] were used. Articles were manually searched utilizing their reference lists. Study selection was restricted or limited to the time of publication but not to the type of tested teeth or ceramic material, endocrown design, system of endocrown construction, abutment scanning, and system of the marginal adaption measurement. A total of 17 in vitro studies published between 2016 and 2023 were included in this systemic review. Less than half of the studies were published during 2023. Most studies used lithium disilicate glass ceramic and zirconia-reinforced lithium silicate all-ceramic materials by CAD/CAM or heat-press systems. Marginal adaptation, or marginal gap, was almost equal in the 2 materials, while it was slightly or marginally higher in the heat-press than in the CAD/CAM system. All-ceramic lithium disilicate glass ceramic and/or zirconia endocrowns fabricated for posterior teeth in both arches using CAD/CAM or heat-press had recorded marginal adaptation values within an acceptable range.

High Prevalence of Musculoskeletal Disorders Among Dental Professionals: A Study on Ergonomics and Workload in Yemen.

BACKGROUND Dentists frequently have work-related musculoskeletal disorder (MSD) diseases, which are the profession's second most common cause of disability. Awareness of dental ergonomics is necessary for controlling MSDs associated with dental workload. Dental professionals need additional training in dental ergonomics to reduce serious complications associated with dental workload. This questionnaire-based study aimed to evaluate the understanding of physical ergonomics and musculoskeletal disorders in 310 dental health professionals and students in Yemen. MATERIAL AND METHODS This was a cross-sectional study was conducted among 400 dental professionals working in various clinics and universities in Sana'a City, Yemen. They received a self-administered questionnaire that was developed from earlier studies. Five sections made up the questionnaire. The first section of the survey included questions about sex, age, and clinical professions; the second section focused on ergonomic awareness; the third section asked about work conditions; the fourth section asked about the prevalence of musculoskeletal disorders; and the fifth section asked about interventions used. Data were analyzed using SPSS version 25.0, and a P value of ≤0.05 was considered significant. RESULTS Only 310 questionnaires were completed. The participants'; level of understanding of ergonomics was low. One-way ANOVA showed a significant portion of respondents reported having MSDs, and they frequently reported pain related to workload. The neck, lower back, upper back, and shoulders experienced the highest levels of pain. CONCLUSIONS The prevalence of MSDs was high among dental professionals, especially in the lower back, upper back, and shoulder. This necessitates preventive measures like ergonomic positions, ergonomic equipment, regular exercise, and work breaks.

A Systematic Review of Publications Using the Dundee Ready Education Environment Measure (DREEM) to Monitor Education in Medical Colleges in Saudi Arabia.

BACKGROUND This systematic review aimed to identify and evaluate publications using the Dundee Ready Educational Environment Measure (DREEM) and its domains, genders, and educational level (EL) to monitor the education environment in medical colleges (MCs), applied medical science colleges (AMSCs), and dental colleges (DCs) in Saudi Arabia (SA). MATERIAL AND METHODS A literature search was performed using PubMed, ScienceDirect, Scopus, Wiley Library, and Web of Science database keywords and medical, applied medical science, dental colleges headings, followed by a summary and analysis of results. We included all related studies that used DREEM as a tool and were published up to 2022. The following information was extracted from the included studies: researcher's name(s), publication year, overall DREEM, domain, gender, and educational levels. RESULTS Among the 40 studies included in this review, 25 papers were conducted in medical colleges, 5 in applied medical science, and 10 in dental colleges. Overall, DREEM scores among all involved colleges were "more positive than negative," with scores between 101 and 150. In relation to the 5 domains of DREEM, the percentages of medical colleges ranged from 75% to 88% for all domains, whereas it was higher in dental (80% to 90%) in most domains, but considerably lower for applied medical science (50% to 75%). Females had higher DREEM values in dental than medical and applied medical science colleges, whereas educational levels were higher in applied medical science colleges. CONCLUSIONS Overall, DREEM scores were more positive than negative and moved in the correct direction among all involved colleges, with varying degrees of significance between genders and educational levels.