Airborne or Droplet Precautions for Health Workers Treating Coronavirus Disease 2019?

Cases of coronavirus disease 2019 (COVID-19) have been reported in more than 200 countries. Thousands of health workers have been infected, and outbreaks have occurred in hospitals, aged care facilities, and prisons. The World Health Organization (WHO) has issued guidelines for contact and droplet precautions for healthcare workers caring for suspected COVID-19 patients, whereas the US Centers for Disease Control and Prevention (CDC) has initially recommended airborne precautions. The 1- to 2-meter (≈3-6 feet) rule of spatial separation is central to droplet precautions and assumes that large droplets do not travel further than 2 meters (≈6 feet). We aimed to review the evidence for horizontal distance traveled by droplets and the guidelines issued by the WHO, CDC, and European Centre for Disease Prevention and Control on respiratory protection for COVID-19. We found that the evidence base for current guidelines is sparse, and the available data do not support the 1- to 2-meter (≈3-6 feet) rule of spatial separation. Of 10 studies on horizontal droplet distance, 8 showed droplets travel more than 2 meters (≈6 feet), in some cases up to 8 meters (≈26 feet). Several studies of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) support aerosol transmission, and 1 study documented virus at a distance of 4 meters (≈13 feet) from the patient. Moreover, evidence suggests that infections cannot neatly be separated into the dichotomy of droplet versus airborne transmission routes. Available studies also show that SARS-CoV-2 can be detected in the air, and remain viable 3 hours after aerosolization. The weight of combined evidence supports airborne precautions for the occupational health and safety of health workers treating patients with COVID-19.

Droplets and Aerosols Generated by Singing and the Risk of Coronavirus Disease 2019 for Choirs.

Choral singing has become a major risk during the coronavirus disease 2019 (COVID-19) pandemic due to high infection rates. Our visualization and velocimetry results reveal that the majority of droplets expelled during singing follow the ambient airflow pattern. These results point toward the possibility of COVID-19 spread by small airborne droplets during singing.

Modeling on the Effects of Deliberate Release of Aerosolized Inhalational Bacillus anthracis (Anthrax) on an Australian Population.

This study aimed to determine optimal mitigation strategies in the event of an aerosolized attack with Bacillus anthracis, a category A bioterrorism agent with a case fatality rate of nearly 100% if inhaled and untreated. To simulate the effect of an anthrax attack, we used a plume dispersion model for Sydney, Australia, accounting for weather conditions. We determined the radius of exposure in different sizes of attack scenarios by spore quantity released per second. Estimations of different spore concentrations were then used to calculate the exposed population to inform a Susceptible-Exposed-Infected-Recovered (SEIR) deterministic mathematical model. Results are shown as estimates of the total number of exposed and infected people, along with the burden of disease, to quantify the amount of vaccination and antibiotics doses needed for stockpiles. For the worst-case scenario, over 500,000 people could be exposed and over 300,000 infected. The number of deaths depends closely on timing to start postexposure prophylaxis. Vaccination used as a postexposure prophylaxis in conjunction with antibiotics is the most effective mitigation strategy to reduce deaths after an aerosolized attack and is more effective when the response starts early (2 days after release) and has high adherence, while it makes only a small difference when started late (after 10 days).

The ability of face masks to reduce transmission of microbes.

CLINICAL RELEVANCE: Optometrists have been advised to wear face masks during the COVID-19 pandemic. This study examined whether face masks were equally protective against transmission of microbes. BACKGROUND: The aim of the current study was to examine the ability of face masks to reduce transmission of microbes in aerosols and during speech. METHODS: Different face masks, surgical, medical 3-ply and cloth masks with different layers were used. The masks were tested under the ASTM standard F2101-1 to measure their ability to reduce the transmission of aerosolised Staphylococcus aureus. Bacterial cells in different sized aerosols were captured on agar plates. The ability of masks to reduce the transmission of bacteria during speech over 30 cm was measured. Bacteria were captured in masks or on agar plates at a distance of 30 cm during the speech. RESULTS: All masks reduced the transmission of aerosolised S. aureus (p ≤ 0.007). The medical 3-ply and cloth masks with three layers reduced the transmission of S. aureus aerosols (3.3 µm) by 98% and surgical and seven-layer masks reduced this by 100%. An antibacterial silver mask showed significantly greater transmission of S. aureus in aerosols of 4.7 µm (16 ± 6 cells) and 3.3 µm (122 ± 66 cells) compared to all other masks (0-3 cells and 0-15 cells, respectively; p ≤ 0.016). Surgical and three-layer masks had significantly worse filtration of 1.1 µm aerosols than for other aerosol sizes. Wearing a mask reduced the transmission of bacteria during speech, but the inner surface of these masks became contaminated with 528-3060 bacterial cells. CONCLUSIONS: Face masks effectively reduce the transmission of microbes in laboratory tests. Face masks made with seven layers were very effective at stopping transmission of S. aureus in all aerosol particle sizes. However, face masks become rapidly contaminated during wear. If masks are to be re-used, they should be regularly replaced or appropriately washed.

Flow dynamics of droplets expelled during sneezing.

Respiratory infections transmit through droplets and aerosols generated by the infected individual during respiratory emissions. It is essential to study the flow dynamics of these emissions to develop strategies for mitigating the risk of infection. In particular, the dynamics of droplets expelled during violent exhalations such as sneezing is crucial, but has received little attention to date. Here, for the first time, we present the results of droplet dynamics of 35 sneezes, obtained from four volunteers, using particle tracking velocimetry experiments. Our results reveal a mean droplet velocity of 2-5.4 m/s across the different subjects. These values are significantly lower than what is usually assumed in the studies simulating or replicating sneezes. Furthermore, the large variation in droplet speeds, flow direction, spread angle, and head movement is also quantified. These findings will enable the refinement of models and simulations of sneezes toward improving infection control guidelines.

Experimental Evidence for the Optimal Design of a High-Performing Cloth Mask.

Cloth masks can be an alternative to medical masks during pandemics. Recent studies have examined the performance of fabrics under various conditions; however, the performance against violent respiratory events such as human sneezes is yet to be explored. Accordingly, we present a comprehensive experimental study using sneezes by a healthy adult and a tailored image-based flow measurement diagnostic system evaluating all dimensions of protection of commonly available fabrics and their layered combinations: the respiratory droplet blocking efficiency, water resistance, and breathing resistance. Our results reveal that a well-designed cloth mask can outperform a three-layered surgical mask for such violent respiratory events. Specifically, increasing the number of layers significantly increases the droplet blocking efficiency, on average by ∼20 times per additional fabric layer. A minimum of three layers is necessary to resemble the droplet blocking performance of surgical masks, and a combination of cotton/linen (hydrophilic inner layer)-blends (middle layer)-polyester/nylon (hydrophobic outer layer) exhibited the best performance among overall indicators tested. In an optimum three-layered design, the average thread count should be greater than 200, and the porosity should be less than 2%. Furthermore, machine washing at 60 °C did not significantly impact the performance of cloth masks. These findings inform the design of high-performing homemade cloth masks.

Last-resort strategies during mask shortages: optimal design features of cloth masks and decontamination of disposable masks during the COVID-19 pandemic.

Face masks and respirators are the most widely used intervention measures for respiratory protection. In the wake of COVID-19, in response to shortages and lack of availability of surgical masks and respirators, the use of cloth masks has become a research focus. Various fabrics have been promoted with little evidence-based foundation and without guidelines on design principles for optimal performance. In these circumstances, it is essential to understand the properties, key performance factors, filter mechanisms and evidence on cloth masks materials. The general community might also need to decontaminate and reuse disposable, single-use devices as a last resort. We present an overview of the filter materials, filter mechanisms and effectiveness, key performance factors, and hydrophobicity of the common disposable masks, as well as cloth masks. We also reviewed decontamination methods for disposable respiratory devices. As an alternative to surgical masks and respirators, we recommend a cloth mask made of at least three layers (300-350 threads per inch) and adding a nylon stocking layer over the mask for a better fit. Water-resistant fabrics (polyesters/nylon), blends of fabrics and water-absorbing fabrics (cotton) should be in the outside layer, middle layer/layers and inside layer, respectively. The information outlined here will help people to navigate their choices if facing shortages of appropriate respiratory protection during the COVID-19 pandemic.

An experimental framework to capture the flow dynamics of droplets expelled by a sneeze.

ABSTRACT: Respiratory activities such as sneezing generate pathogen laden droplets that can deposit in the respiratory tract of a susceptible host to initiate infection. The extent of spread of these droplets determines the safe distance between a patient and health care worker. Here, we have presented a method to visualize the droplets expelled by a sneeze using light-sheet illumination. This method of visualization provides images that clearly resolve the velocities of droplets with minimal overlapping trajectories, towards understanding their flow dynamics. Furthermore, we present the image processing techniques required to perform accurate Particle Tracking Velocimetry to understand the motion of expelled droplets. Flow fields are presented from applying this methodology over multiple sneezes which reveal that less than 1% of droplets expelled travel at velocities greater than 10 m/s and almost 80% of droplets travel at velocities less than 5 m/s. Furthermore, we observe that some droplets are generated by ligament breakup outside the mouth and some are generated within the respiratory tract.

Systematic Review and Evaluation of Mathematical Attack Models of Human Inhalational Anthrax for Supporting Public Health Decision Making and Response.

BACKGROUND: Anthrax is a potential biological weapon and can be used in an air-borne or mail attack, such as in the attack in the United States in 2001. Planning for such an event requires the best available science. Since large-scale experiments are not feasible, mathematical modelling is a crucial tool to inform planning. The aim of this study is to systematically review and evaluate the approaches to mathematical modelling of inhalational anthrax attack to support public health decision making and response. METHODS: A systematic review of inhalational anthrax attack models was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria. The models were reviewed based on a set of defined criteria, including the inclusion of atmospheric dispersion component and capacity for real-time decision support. RESULTS: Of 13 mathematical modelling studies of human inhalational anthrax attacks, there were six studies that took atmospheric dispersion of anthrax spores into account. Further, only two modelling studies had potential utility for real-time decision support, and only one model was validated using real data. CONCLUSION: The limited modelling studies available use widely varying methods, assumptions, and data. Estimation of attack size using different models may be quite different, and is likely to be under-estimated by models which do not consider weather conditions. Validation with available data is crucial and may improve models. Further, there is a need for both complex models that can provide accurate atmospheric dispersion modelling, as well as for simpler modelling tools that provide real-time decision support for epidemic response.