Quantification of melamine in drinking water and wastewater by micellar liquid chromatography.

Because of the large potential health impact caused by deliberate contamination with the synthetic chemical melamine of different products for human and animal consumption, the World Health Organization and the Food and Agriculture Organization of the United Nations provided a range of recommendations in order to facilitate obtaining needed data, among which was the determination of the background levels of melamine in drinking water and wastewater (December 4, 2008). A chromatographic procedure using a C18 column, a micellar mobile phase consisting of sodium dodecyl sulfate (0.1 M), and 1-propanol (7.5%) buffered at pH 3, and detection by absorbance at 210 nm is reported in this paper for the quantification of melamine in drinking water and wastewater. Samples were filtered and directly injected into the chromatographic system, thus avoiding an extraction procedure. The optimal mobile phase composition was obtained by a chemometrics approach that considered the retention factor, efficiency, and peak shape. Melamine was eluted in about 6.2 min without interferences. Validation was performed following U.S. Food and Drug Administration guidelines. The analytical parameters studied were linearity (0.03-5 microg/mL, R2 = 0.998), LOD (13 nglmL), intraday and interday accuracy (between 4.1 and 12.2%), intraday and interday precision (less than 14.8%), and robustness (RSD < 5.1% for retention time and <9.0% for area). The proposed methodology was successfully applied for analysis of local wastewater and drinking water, in which no melamine was found.

Use of micellar mobile phases for the chromatographic determination of melamine in dietetic supplements.

Melamine is a nitrogen-rich industrial chemical which is occasionally used to increase the apparent protein content of different products destined for human and animal consumption. In this work, a liquid chromatographic procedure that uses micellar mobile phases of sodium dodecyl sulfate (SDS) buffered at pH 3, a C18 column and UV detection is reported for the determination of melamine in dietetic supplements. Samples were reconstituted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in less than 10 min with no interference by other compounds of the matrices. The optimum mobile phase composition was taken by a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the indications of the European Commission (Decision 2002/657/EC). The following parameters were considered: linearity (0.02-100 µg mL(-1); R(2) = 0.9996), intra- and inter-day precisions (<12.4%), accuracy (90.0-101.3%), and robustness (less than 9.8% and 5.1%, for retention time and peak area, respectively). The limits of detection and quantification were 9 and 20 ng mL(-1), respectively. Recoveries for several spiked samples were in the 85.8-114.3% range. These results indicate that the proposed methodology is useful for routine analysis of control quality of infant formula and adult dietetic supplements.

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC.

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100ppm; r(2)=0.999), limit of detection (5ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.