Comparison of the accuracy of different types of bite recordings - an in vitro study.

OBJECTIVES: Reconstruction of a three-dimensional jaw position determined by a bite recording is an important aspect of prosthetic therapy. Different materials are used for this purpose. In the dental technical workflow, recordings are used to mount a lower jaw cast in a patient-like spatial position relative to the upper jaw cast. We evaluated the accuracy of positioning under the influence of different jaw positions and materials. MATERIALS AND METHODS: In an experimental setup, comprising an articulator, a pair of metal casts, and an optoelectronic measurement system, the spatial position of the incisal point and two condylar points were measured. To evaluate the accuracy of repeated repositioning of casts in the technical workflow, 324 measurements were taken from 108 recordings, consisting of silicone bite-stops made of addition curing silicone with 95 shore hardness, acrylic wafers, and wax recordings. The recordings were obtained in four jaw relations differing in vertical and protrusive components. RESULTS: Of the three materials/material combinations examined, silicone showed the most consistent results across all measurements, followed by the acrylic wafer system, and then wax recordings. Generally, recordings with smaller gaps between the jaws and no protrusive components showed greater deviations compared to jaw positions with greater protrusion and higher vertical dimensions. CONCLUSIONS AND CLINICAL RELEVANCE: To achieve reliable model mounting with high accuracy, recordings should include the use of a frontal jig and four small recording platelets made of silicone, especially if only a slight elevation of the vertical dimension is needed.

HOW TO IDENTIFY SUBGROUPS IN LONGITUDINAL CLINICAL DATA: TREATMENT RESPONSE PATTERNS IN PATIENTS WITH A SHORTENED DENTAL ARCH.

BACKGROUND: When dental patients seek care, treatments are not always successful,that is patients' oral health problems are not always eliminated or substantially reduced. Identifying these patients (treatment non-responders) is essential for clinical decision-making. Group-based trajectory modeling (GBTM) is rarely used in dentistry, but a promising statistical technique to identify non-responders in particular and clinical distinct patient groups in general in longitudinal data sets. AIM: Using group-based trajectory modeling, this study aimed to demonstrate how to identify oral health-related quality of life (OHRQoL) treatment response patterns by the example of patients with a shortened dental arch (SDA). METHODS: This paper is a secondary data analysis of a randomized controlled clinical trial. In this trial SDA patients received partial removable dental prostheses replacing missing teeth up to the first molars (N = 79) either or the dental arch ended with the second premolar that was present or replaced by a cantilever fixed dental prosthesis (N = 71). Up to ten follow-up examinations (1-2, 6, 12, 24, 36, 48, 60, 96, 120, and 180 months post-treatment) continued for 15 years. The outcome OHRQoL was assessed with the 49-item Oral Health Impact Profile (OHIP). Exploratory GBTM was performed to identify treatment response patterns. RESULTS: Two response patterns could be identified - "responders" and "non-responders." Responders' OHRQoL improved substantially and stayed primarily stable over the 15 years. Non-responders' OHRQoL did not improve considerably over time or worsened. While the SDA treatments were not related to the 2 response patterns, higher levels of functional, pain-related, psychological impairment in particular, and severely impaired OHRQoL in general predicted a non-responding OHRQoL pattern after treatment. Supplementary, a 3 pattern approach has been evaluated. CONCLUSIONS: Clustering patients according to certain longitudinal characteristics after treatment is generally important, but specifically identifying treatment in non-responders is central. With the increasing availability of OHRQoL data in clinical research and regular patient care, GBTM has become a powerful tool to investigate which dental treatment works for which patients.

Rehabilitation of shortened dental arches: A fifteen-year randomised trial.

BACKGROUND: Few long-term studies on treatments in the shortened dental arch (SDA) are available. OBJECTIVE: The objective of this trial was to analyse the long-term success of two different treatment concepts. METHODS: Patients over 35 years of age with missing molars in one jaw and at least the canine and one premolar present on both sides were eligible. In the partial removable dental prosthesis (PRDP) group (N = 81), molars and missing second premolars were replaced by a precision attachment retained prosthesis. In the SDA group (N = 71), the dental arch ended with the second premolar that had to be present or replaced by a cantilever fixed dental prosthesis. Follow-up examinations were carried out over 15 years. RESULTS: A comprehensive outcome variable comprised four failure categories for which Kaplan-Meier survival (success) analyses were conducted. Half of the patients exhibited a continuous preservation of the per protocol prosthetic status that remained totally unaffected by complications for more than 10 years. The event-free success rates for moderate or worse failure implied a loss of the per protocol prosthetic status. The respective survival rates fell below 50% at 14.2 years in the PRDP group and 14.3 years in the SDA group. In none of the analyses, a significant group difference was found. CONCLUSIONS: In patients with an SDA condition, changes in the prosthetic status have to be expected. The affected proportion increases almost linearly from shortly after treatment and comprises the majority after 15 years. The influence of the examined treatments on success appears to be low.

IMPACT OF SHORTENED DENTAL ARCH ON ORAL HEALTH-RELATED QUALITY OF LIFE.

BACKGROUND: A shortened dental arch (SDA) is an established treatment concept for patients with missing molars. However, little is known regarding long-term course of oral health-related quality of life (OHRQoL) in patients with SDA and the benefits from replacement of missing molars. OBJECTIVE: Purpose of this multi-center randomized clinical trial was to assess OHRQoL over a period of 15 years in patients with molar replacement by a removable partial denture (RPD) compared to patients with a restored SDA without molar replacement. METHODS: Patients at least 35 years of age with all molars missing in 1 jaw and at least the canine and one premolar present on each side were included. Patients received either a precision attachment-retained, RPD for replacement of missing molars (n = 79), or the dental arch ended with the second premolar (SDA) that had to be present or replaced by a cantilever fixed dental prosthesis (n = 71). Follow-up examinations continued for 15 years. OHRQoL was assessed with the 49-item Oral Health Impact Profile (OHIP). OHIP summary and dimension scores were longitudinally modeled in the statistical analyses to assess course of OHRQoL over time applying an intention-to-treat approach. In addition, scores for the OHRQoL dimensions Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact were analyzed. RESULTS: After an initial improvement in OHRQoL indicated by a mean decrease of 20.0 OHIP points with an effect size of 0.61 in the entire study population, OHRQoL stayed relatively constant over the entire follow-up period. Assuming a constant time and treatment effects over the study period, OHRQoL did not differ statistically significant between the 2 treatments (0.4 OHIP points; 95%-CI: 7.1 - 6.2). OHRQoL after treatment did not change notably over 15 years and was statistically nonsignificant as well (P = .872). Similar findings were observed in all 4 OHRQoL dimensions. CONCLUSIONS: In patients, missing all molars in one jaw OHRQoL improved providing RPD or restoring SDA to a clinically relevant degree. Treatment-related improvement remained mostly stable over a period of at least 15 years. Therefore, patients can be informed that both treatment concepts are equivalent concerning long-term OHRQoL. Accordingly, patients' preferences regarding treatment options should be granted priority in treatment decision making with the SDA treatment option being the default.

The four-minute approach revisited: accelerating MRI-based multi-factorial age estimation.

OBJECTIVES: This feasibility study aimed to investigate the reliability of multi-factorial age estimation based on MR data of the hand, wisdom teeth and the clavicles with reduced acquisition time. METHODS: The raw MR data of 34 volunteers-acquired on a 3T system and using acquisition times (TA) of 3:46 min (hand), 5:29 min (clavicles) and 10:46 min (teeth)-were retrospectively undersampled applying the commercially available CAIPIRINHA technique. Automatic and radiological age estimation methods were applied to the original image data as well as undersampled data to investigate the reliability of age estimates with decreasing acquisition time. Reliability was investigated determining standard deviation (SSD) and mean (MSD) of signed differences, intra-class correlation (ICC) and by performing Bland-Altman analysis. RESULTS: Automatic age estimation generally showed very high reliability (SSD < 0.90 years) even for very short acquisition times (SSD ≈ 0.20 years for a total TA of 4 min). Radiological age estimation provided highly reliable results for images of the hand (ICC ≥ 0.96) and the teeth (ICC ≥ 0.79) for short acquisition times (TA = 16 s for the hand, TA = 2:21 min for the teeth), imaging data of the clavicles allowed for moderate acceleration (TA = 1:25 min, ICC ≥ 0.71). CONCLUSIONS: The results demonstrate that reliable multi-factorial age estimation based on MRI of the hand, wisdom teeth and the clavicles can be performed using images acquired with a total acquisition time of 4 min.

High-resolution MR imaging for dental impressions: a feasibility study.

OBJECTIVES: Magnetic resonance imaging is an emerging technology in dental medicine. While low-resolution MRI has especially provided means to examine the temporomandibular joint due to its anatomic inaccessibility, it was the goal of this study to assess whether high-resolution MRI is capable of delivering a dataset sufficiently precise enough to serve as digital impression of human teeth. MATERIALS AND METHODS: An informed and consenting patient in need of dental restoration with fixed partial dentures was chosen as subject. Two prepared teeth were measured using MRI and the dataset subjected to mathematical processing before Fourier transformation. After reconstruction, a 3D file was generated which was fed into an existing industry standard CAD/CAM process. RESULTS: A framework for a fixed dental prosthesis was digitally modeled and manufactured by laser-sintering. The fit in situ was found to be acceptable by current clinical standards, which allowed permanent placement of the fixed prosthesis. CONCLUSIONS: Using a clinical whole-body MR scanner with the addition of custom add-on hardware, contrast enhancement, and data post-processing, resolution and signal-to-noise ratio were sufficiently achieved to allow fabrication of a dental restoration in an acquisition time comparable to the setting time of common dental impression materials. Furthermore, the measurement was well tolerated. CLINICAL RELEVANCE: The herein described method can be regarded as proof of principle that MRI is a promising option for digital impressions when fixed partial dentures are required.

Unexpected metallic foreign bodies on panoramic scans - a narrative review. / Unerwartete metallene Fremdkörper auf Panoramaschichtaufnahmen ­ eine Übersicht.

BACKGROUND: The digital panoramic radiograph (orthopantomogram, OPG) is the standard radiographic technique for basic diagnostics in dental practice. A correctly taken image provides a good overview of teeth and jaw, whereas radiopaque foreign materials, e. g. metal, can obscure relevant findings. METHODS: A literature review on unexpected metallic foreign bodies in OPG was performed to determine the spectrum of metallic foreign bodies that may cause radiopaque areas on panoramic radiographs in routine clinical use. RESULTS AND CONCLUSION: A total of 37 different unexpected metallic foreign bodies were found. They can be categorized as jewelry, clothing, personal protective equipment, medical devices, iatrogenic foreign bodies, and rare incidental findings. Radiopaque foreign materials in the OPG are often relatively easy to recognize as artifacts because of their location, and they are avoidable in most cases. If unclear, a three-dimensional radiograph was helpful for determining the location. Radiopaque areas caused by foreign bodies can lead to misinterpretation or partial or complete non-evaluability and should therefore be avoided. KEY POINTS: · The OPG is the standard radiograph for dentists, oral surgeons, and oral and maxillofacial surgeons.. · Foreign bodies made of metal can lead to non-evaluability of panoramic radiographs. Based on a review of the literature and exemplary radiographs, this article provides an overview of rare but typical metallic foreign bodies in OPG, thus addressing the problem of the subfield of radiography by making radiologists more familiar with these images.. · The spectrum of unexpected metallic foreign bodies includes unremoved earrings with the typical ghost images on the contralateral side, piercings, hearing aids, acupuncture needles, rare iatrogenic foreign bodies, incidental findings in infants in the nose and external auditory canal, vascular clips after surgical interventions, and ritual subcutaneous foreign materials.. CITATION FORMAT: · Brauer HU, Bartols A, Hellmann D et al. Unexpected metallic foreign bodies on panoramic scans - a narrative review. Fortschr Röntgenstr 2023; 195: 809 - 818.

Assessment of the quality of different commercial providers using artificial intelligence for automated cephalometric analysis compared to human orthodontic experts.

PURPOSE: The aim of this investigation was to evaluate the accuracy of various skeletal and dental cephalometric parameters as produced by different commercial providers that make use of artificial intelligence (AI)-assisted automated cephalometric analysis and to compare their quality to a gold standard established by orthodontic experts. METHODS: Twelve experienced orthodontic examiners pinpointed 15 radiographic landmarks on a total of 50 cephalometric X­rays. The landmarks were used to generate 9 parameters for orthodontic treatment planning. The "humans' gold standard" was defined by calculating the median value of all 12 human assessments for each parameter, which in turn served as reference values for comparisons with results given by four different commercial providers of automated cephalometric analyses (DentaliQ.ortho [CellmatiQ GmbH, Hamburg, Germany], WebCeph [AssembleCircle Corp, Seongnam-si, Korea], AudaxCeph [Audax d.o.o., Ljubljana, Slovenia], CephX [Orca Dental AI, Herzliya, Israel]). Repeated measures analysis of variances (ANOVAs) were calculated and Bland-Altman plots were generated for comparisons. RESULTS: The results of the repeated measures ANOVAs indicated significant differences between the commercial providers' predictions and the humans' gold standard for all nine investigated parameters. However, the pairwise comparisons also demonstrate that there were major differences among the four commercial providers. While there were no significant mean differences between the values of DentaliQ.ortho and the humans' gold standard, the predictions of AudaxCeph showed significant deviations in seven out of nine parameters. Also, the Bland-Altman plots demonstrate that a reduced precision of AI predictions must be expected especially for values attributed to the inclination of the incisors. CONCLUSION: Fully automated cephalometric analyses are promising in terms of timesaving and avoidance of individual human errors. At present, however, they should only be used under supervision of experienced clinicians.

On precise localization of boundaries between extended uniform objects in MRI: tooth imaging as an example.

OBJECT: The purpose of this study was to investigate the achievable precision of localization of boundaries between extended uniform objects in MRI and to study the effect of zero-filling on reaching it. MATERIALS AND METHODS: A theoretical model of an object boundary in the presence of noise was introduced, and the error of localization was derived. The effect of zero-filling on reaching the achievable precision was assessed by computer simulations and experimentally on an extracted tooth in a signal-giving medium. RESULTS: With the help of the theoretical model, the achievable precision of localization of boundaries between two uniform extended objects was shown to surpass the nominal resolution by a factor equal to the contrast-to-noise ratio. In the simulations and phantom experiments, zero-filling followed by image segmentation allowed for approaching the theoretical value. As an application example, an MRI-based dental impression was performed in vivo, and a bridge was produced and permanently fixed to the volunteer's teeth. CONCLUSION: This work demonstrates that in an MRI experiment, the achievable precision of localization of object boundaries is not limited to the nominal resolution and can surpass it by an order of magnitude. Zero-filling is a simple and effective method of reaching it.

Artificial intelligence in orthodontics : Evaluation of a fully automated cephalometric analysis using a customized convolutional neural network.

PURPOSE: The aim of this investigation was to create an automated cephalometric X­ray analysis using a specialized artificial intelligence (AI) algorithm. We compared the accuracy of this analysis to the current gold standard (analyses performed by human experts) to evaluate precision and clinical application of such an approach in orthodontic routine. METHODS: For training of the network, 12 experienced examiners identified 18 landmarks on a total of 1792 cephalometric X­rays. To evaluate quality of the predictions of the AI, both AI and each examiner analyzed 12 commonly used orthodontic parameters on a basis of 50 cephalometric X­rays that were not part of the training data for the AI. Median values of the 12 examiners for each parameter were defined as humans' gold standard and compared to the AI's predictions. RESULTS: There were almost no statistically significant differences between humans' gold standard and the AI's predictions. Differences between the two analyses do not seem to be clinically relevant. CONCLUSIONS: We created an AI algorithm able to analyze unknown cephalometric X­rays at almost the same quality level as experienced human examiners (current gold standard). This study is one of the first to successfully enable implementation of AI into dentistry, in particular orthodontics, satisfying medical requirements.

Periodontal health in shortened dental arches: A 10-year RCT.

PURPOSE: This analysis focused on periodontal health in shortened dental arches (SDAs). METHODS: In a randomized controlled clinical trial, patients with missing molars in one jaw and at least one premolar and canine on both sides were eligible for participation. In the partial removable dental prosthesis (PRDP) group (n = 79), molars were replaced with a precision attachment retained PRDP. In the SDA group (n == 71), the SDA up to the second premolars was either left as is or restored with fixed dental prostheses. Outcome variables were vertical clinical attachment loss (CAL-V), pocket probing depth (PPD), bleeding on probing (BOP) and plaque index (PLI). For CAL-V and PPD, the changes at six measuring points per tooth were analyzed. For BOP and PLI, patient related rates were calculated for each point in time. Statistical methods included linear regression analyses. RESULTS: In the intention-to-treat (ITT) analysis for CAL-V in the study jaw, the 10 year patient related mean changes were 0.66 mm in the PRDP group and -0.13 mm in the SDA group. The resulting mean patient related group difference of 0.79 mm (95% CI: 0.20 mm-1.38 mm) was significant (p = 0.01). There were no significant differences in the ITT analyses for PPD. For BOP and PLI, significant group differences with more favorable results for the SDA group were found. CONCLUSIONS: In view of lacking substantial differences for CAL-V and PPD, the overall differences were considered of minor clinical relevance. The results add confirmatory evidence to the shortened dental arch concept and its clinical viability (controlled-trials.com ISRCTN97265367).

High-resolution 3D magnetic resonance imaging and quantification of carious lesions and dental pulp in vivo.

OBJECTIVE: The purpose of the study was to assess the feasibility of MRI of three-dimensional visualization and quantification of carious lesions, as well as measurement of the distance between the lesion and dental pulp in vivo. MATERIALS AND METHODS: High-resolution 3D MRI was performed to measure seven carious lesions in vivo using gelatinous gadolinium-based oral contrast medium in combination with an intraoral radio frequency receiver coil on a clinical 1.5 T MRI scanner. Extension of the carious lesion in three spatial dimensions and the minimum distance between the lesion and dental pulp were quantified. When possible, the result was compared to an X-ray projection and an impression of the lesion taken using a plastic impression material before and after dental treatment. RESULTS: Carious lesions, including pit and fissure, approximal lesions, and occult dentin caries, could be visualized due to the MRI signal rise in the porous affected dentin. The minimum distance between the carious lesion and dental pulp could be determined in all cases. CONCLUSION: The results presented demonstrate the feasibility of high-resolution dental MRI to three-dimensionally visualize and quantify carious lesions, including approximal and occult caries lesions, and measure the minimum distance to the dental pulp.

Dental age estimation: The chronology of mineralization and eruption of male third molars with 3T MRI.

Forensic age estimation has recently become an important topic due to a steady increase of cross border migration. Dental age assessment is one pillar of the forensic age estimation in living persons. Currently it is done by evaluating an orthopantomogram, which is generated using ionizing radiation. Nevertheless, the use of X-ray without medical indication is ethically questionable. Therefore, the aim of the study was to provide reference values for dental MRI to have an alternative radiation-free method for the assessment of dental age. In this cross-sectional study, 316 adolescent, male individuals were investigated. Two dentists evaluated the stage of mineralization and eruption of the third molars of the upper and lower jaws, according to the staging systems established by Demirjian and Olze. Following data analysis and the creation of reference tables, the likelihood ratios to be over specific age limits were calculated. In the mineralization evaluation mainly stages D-H were seen (range A-H); regarding eruption, all four stages (A-D) appeared. A significant difference between the teeth was only found for eruption stage A. However, the evaluation of participants who had all four third molars, showed partly different stages for the individual teeth as well for mineralization as for the eruption. Therefore, it seems to be important to include all available teeth in the age estimation. The likelihood ratios showed about 99% probability to be 18 years or older for stage H (mineralization), but only about 93% for stage D (eruption). In summary, it can be concluded that dental MRI holds promise as an alternative to conventional orthopantomogram based age assessment.

Impact of shortened dental arch on oral health-related quality of life over a period of 10 years - A randomized controlled trial.

OBJECTIVES: To compare oral health-related quality of life (OHRQoL) in patients with either molar replacement by partial removable dental prostheses (PRDP) or with restored shortened dental arches (SDA) over a period of 10 years. METHODS: In this multi-center RCT, a consecutive sample of 215 patients with bilateral molar loss in at least one jaw was initially recruited in 14 prosthodontic departments. Of those patients, 150 could be randomly allocated to the treatment groups (SDA: n = 71; PRDP: n = 79), received the allocated treatment, and were available for follow-up assessments. OHRQoL was assessed using the 49-item version of the Oral Health Impact Profile (OHIP) before treatment (baseline) and at follow-ups after treatment (4-8 weeks and 6, 12, 24, 36, 48, 60, 96, and 120 months). To investigate the course of OHRQoL over time, we longitudinally modelled treatment and time effects using mixed-effects models. RESULTS: OHRQoL substantially improved from baseline to first follow-up in both groups indicated by a mean decrease in OHIP scores of 20.0 points (95%-CI: 12.5-27.5). When compared to the SDA group, OHRQoL in the PRDP group was not significantly different (-0.6 OHIP points; 95%-CI: -7.1 to 5.9) during the study period when assuming a constant time effect. OHRQoL remained stable over the 10 years with a statistically insignificant time effect (p = 0.848). CONCLUSIONS: For patients requesting prosthodontic treatment for their lost molars, treatments with SDA or PRDP improve clinically relevantly OHRQoL and maintain it over a period of 10 years with no option being superior to the other. CLINICAL SIGNIFICANCE: Since there was no significant difference between the two treatment options over the observation period of 10 years, and since results have stayed stable over time, patients can be informed that both treatment concepts are equivalent concerning OHRQoL.

A new design for post and core restorations implementing positive locking.

The design of a post and core restoration is a trade-off between a series of requirements to achieve stability of the post itself, the surrounding root dentine and the joint between tooth and post, while maintaining a sufficient apical seal of the remaining root canal filling. Post and core restoration systems come in a variety of different designs and dimensions, where each has its specific strength and weakness. With the exception of threaded versions, posts normally rely on either chemical and/or frictional locking between the post and the remaining root. Failure due to fatigue of the joint or root fracture due to overloading of the dentine is a frequent failure mode, especially for posts anchoring removable prostheses. Perforation of the root in an attempt to maximize the post length is a main cause for failure, too. A new design is proposed which uses a short but large diameter post. The risk of decementation is reduced by positive locking. A cavity with an undercut is prepared into the root, into which the post is fitted. Once joined, the post cannot be separated from the tooth without destruction of either the root or the post. The principle of the new design uses preparation tools and a post which is spread at the bottom. A cylindrically prepared hole is re-shaped to a defined inverse taper with the wider diameter at the bottom of the hole. A cylindrical post is inserted and spread at the bottom to a matching shape after placement. A first in vitro test of the stability showed that the positive locking provides at least as good extraction resistance as conventional post without the critical reliance on the luting/bonding agent.

Effect of load angulation and crown shape on forces acting on post and core restored teeth: an in vitro study.

To assess the usefulness of different post and core materials and systems, in vitro testing of fracture strength and fatigue resistance is a useful tool. However, the literature does not present coherent results as to which system can withstand the highest loads. With a geometrical model, the effects of load angulation and contact point location on the generated forces were calculated. To validate the mathematical model, a set of measurements was performed with a set-up that made it possible to measure the critical forces on a post and core restoration. A high level of correlation between the predictions of the model and the measurements was found. It was shown that the resulting forces are strongly dependent on the precise design of the test set-up and results from different geometries cannot be compared directly. Very strong sensitivity to small misalignment was found, all of which serves to explain the large differences in the literature.

The influence of the root cross-section on the stress distribution in teeth restored with a positive-locking post and core design: a finite element study.

Human teeth with substantial coronal defects are subject to reconstruction by means of post and core restorations. Typically, such a restoration comprises a slightly cylindrical post onto which an abutment of varying shape, depending on the designated restoration, is attached. As clinical results are not satisfactory to date, we proposed a new proprietary post and core design which makes use of positive locking. As this prefabricated system is not customised to an individual root's cross-sectional geometry (usually oval), a varying amount of radicular dentin is left in periphery of the core's outer edge. The aim of this study was to assess the implications of this fact, i.e., whether the root has to endure higher overall stress levels which ultimately may lead to failure of one of the components involved. A series of finite element simulations were performed to evaluate stress and strain on the system, in which the proposed post and core was embedded into a virtual dentin cylinder of different diameters, ranging from flush mounting of the restoration to a dentin excess of 4 mm, and subsequently loaded with forces with two angles of attack (90 degrees and 130 degrees ). The results show that flush mounting yields an agreeable stress and strain distribution within the radicular dentin, but overall stress levels drop significantly with an excess of 0.5 mm of surrounding dentin. More than 1 mm excess was not found to have profound positive effects.

Failure analysis of a new post-and-core restoration system using the finite element method.

Human teeth with substantial coronal defects are subject to reconstruction by means of post-and-core restorations. Typically, such a restoration comprises a slightly cylindrical post onto which an abutment of varying shape, depending on the designated restoration, is attached. As clinical results are not satisfactory to date, a new post-and-core design which makes use of positive locking (rather than relying on chemical bonding agents for retention in the residual root) was proposed. Using proprietary burs, an inversely conical hole is machined into the root, into which the prefabricated post-and-core restoration is inserted. This part can be spread at the bottom to match the cavity's undercut form, resulting in a positive lock which can only be separated by destruction of root, restoration or both. Another key feature of this system is a ring/groove geometry which is able to absorb the wedging forces created by said spreading and the stress of loading of the restoration which arises from mascatory forces. To assess the properties, especially in terms of the stress imposed on the remaining tooth at highest possible loading, both finite element simulations and in vitro failure tests were performed and the findings compared. The results suggest that the parameters of the finite element simulations are in good agreement with reality. As calculated and measured force levels immediately before failure of the restoration are high, the introduced new geometry has significant advantages over the classical restoration.

High isotropic resolution magnetic resonance imaging of the mandibular canal at 1.5 T: a comparison of gradient and spin echo sequences.

OBJECTIVES: The precision of localizing the mandibular canal prior to surgical intervention depends on the achievable resolution, whereas identification of the nerve depends on the image contrast. In our study, we developed new protocols based on gradient and spin echo sequences. The results from both sequences were quantitatively compared for their agreement to identify the most suitable approach. METHODS: By limiting the field of view to one side of the mandible, three-dimensional acquisitions with T1 weighted gradient and spin echo sequences were performed with 0.5 × 0.5 × 0.5 mm3 resolution within 6.5 min covering the mandibular canal from the mandibular to the mental foramen. Aliasing artefacts were suppressed by different techniques. A manual segmentation of the mandibular canal from seven healthy volunteers was performed on this section by three different observers. The surface distance of the segmented volumes was computed between both sequences as well as between the different observers as a measure of equality. RESULTS: The quantitative comparison of the segmentation resulted in an average surface distance of 0.26 ± 0.05 mm between both sequences and an interobserver difference of 0.26 ± 0.08 mm for gradient and 0.29 ± 0.07 mm for spin echo data. By repeated evaluation, a difference of 0.15 ± 0.02 mm for gradient and 0.18 ± 0.03 mm for spin echo data was observed, indicating a slightly higher variability for spin echo images. CONCLUSIONS: Both sequences can be used to achieve high-resolution images with good contrast and can be used for precise localization of the mandibular canal. Despite a slightly increased difference for the spin echo data, the advantage of an easy and robust setup remains.

Dental age estimation of living persons: Comparison of MRI with OPG.

The need for forensic age estimations in living adolescents is high mainly due to migration, particularly from countries where birth dates are not reliably documented. To date, the gold standard of dental age estimation is the evaluation of the mineralization and eruption stages of the third molars using an orthopantomogram (OPG). However, the use of ionizing radiation without medical indication is ethically controversial and not permitted in many countries. Thus, the aim of this study was to investigate if dental MRI can be used for the assessment of dental age with equally good results as when using an OPG. 27 healthy volunteers (19 ♀, 8 ♂, age range 13.6-23.1 years, median 18.9 years) underwent an MRI scan of the jaw after a clinically indicated OPG. Mineralization and eruption stages of the molars were independently analyzed on OPGs and MRI by two blinded dentists according to the staging system established by Demirjian and Olze, respectively. The results of OPG and MRI were compared and inter-rater agreement was determined. The developmental stages of the 262 evaluated molars could be clearly differentiated in MRI. For both, mineralization and eruption, there was a good correlation between MRI and OPG. Overall MRI tended to yield slightly lower stages than the OPG. Inter-rater agreement was moderate for mineralization and good regarding eruption. Although a validation of these results using modality-specific reference values is needed, dental MRI seems to be suitable for a use in dental age estimation.