Turn-on mode diarylethenes for bioconjugation and fluorescence microscopy of cellular structures.

The use of photoswitchable fluorescent diarylethenes (fDAEs) as protein labels in fluorescence microscopy and nanoscopy has been limited by labeling inhomogeneity and the need for ultraviolet light for fluorescence activation (on-switching). To overcome these drawbacks, we prepared "turn-on mode" fDAEs featuring thienyl substituents, multiple polar residues, and a reactive maleimide group in the core structure. Conjugates with antibodies and nanobodies displayed complete on-switching and excitation with violet (405 nm) and yellow-green (<565 nm) light, respectively. Besides, they afforded high signal-to-noise ratios and low unspecific labeling in fluorescence imaging. Irradiation with visible light at 532 nm or 561 nm led to transient on-off switching ("blinking") of the fDAEs of double-labeled nanobodies so that nanoscale superresolution images were readily attained through switching and localization of individual fluorophores.

ß-Galactosidase- and Photo-Activatable Fluorescent Probes for Protein Labeling and Super-Resolution STED Microscopy in Living Cells.

We report on the synthesis of two fluorescent probes which can be activated by ß-Galactosidase (ß-Gal) enzymes and/or light. The probes contained 2-nitro-4-oxybenzyl and 3-nitro-4-oxybenzyl fragments, with ß-Gal residues linked to C-4. We performed the enzymatic and photoactivation of the probes in a cuvette and compared them, prior to the labeling of Vimentin-Halo fusion protein in live cells with overexpressed ß-galactosidase. The dye fluorescence afforded the observation of enzyme activity by means of confocal and super-resolution optical microscopy based on stimulated emission depletion (STED). The tracing of enzymatic activity with the retention of activated fluorescent products inside cells was combined with super-resolution imaging as a tool for use in biomedicine and life science.

Supramolecular Complex of Cucurbit[7]uril with Diketopyrrolopyrole Dye: Fluorescence Boost, Biolabeling and Optical Microscopy.

New photostable and bright supramolecular complexes based on cucurbit[7]uril (CB7) host and diketopyrrolopyrole (DPP) guest dyes having two positively charged 4-(trimethylammonio)phenyl groups were prepared and characterized. The dye core displays large Stokes shift (in H2O, abs./emission max. 480/550 nm; ϵ~19 000, τfl>4 ns), strong binding with the host (~560 nM Kd) and a linker affording fluorescence detection of bioconjugates with antibody and nanobody. Combination of protein-functionalized DPP dye with CB7 improves photostability and affords up to 12-fold emission gain. Two-color confocal and stimulated emission depletion (STED) microscopy with 595 nm or 655 nm STED depletion lasers shows that the presence of CB7 not only leads to improved brightness and image quality, but also results in DPP becoming cell-permeable.

Photoactivatable Large Stokes Shift Fluorophores for Multicolor Nanoscopy.

We designed caging-group-free photoactivatable live-cell permeant dyes with red fluorescence emission and ∼100 nm Stokes shifts based on a 1-vinyl-10-silaxanthone imine core structure. The proposed fluorophores undergo byproduct-free one- and two-photon activation, are suitable for multicolor fluorescence microscopy in fixed and living cells, and are compatible with super-resolution techniques such as STED (stimulated emission depletion) and PALM (photoactivated localization microscopy). Use of photoactivatable labels for strain-promoted tetrazine ligation and self-labeling protein tags (HaloTag, SNAP-tag), and duplexing of an imaging channel with another large Stokes shift dye have been demonstrated.

Accelerated MINFLUX Nanoscopy, through Spontaneously Fast-Blinking Fluorophores.

The introduction of MINFLUX nanoscopy allows single molecules to be localized with one nanometer precision in as little as one millisecond. However, current applications have so far focused on increasing this precision by optimizing photon collection, rather than minimizing the localization time. Concurrently, commonly used fluorescent switches are specifically designed for stochastic methods (e.g., STORM), optimized for a high photon yield and rather long on-times (tens of milliseconds). Here, accelerated MINFLUX nanoscopy with up to a 30-fold gain in localization speed is presented. The improvement is attained by designing spontaneously blinking fluorescent markers with remarkably fast on-times, down to 1-3 ms, matching the iterative localization process used in a MINFLUX microscope. This design utilizes a silicon rhodamine amide core, shifting the spirocyclization equilibrium toward an uncharged closed form at physiological conditions and imparting intact live cell permeability, modified with a fused (benzo)thiophene spirolactam fragment. The best candidate for MINFLUX microscopy (also suitable for STORM imaging) is selected through detailed characterization of the blinking behavior of single fluorophores, bound to different protein tags. Finally, optimization of the localization routines, customized to the fast blinking times, renders a significant speed improvement on a commercial MINFLUX microscope.

Photoactivatable Carbo- and Silicon-Rhodamines and Their Application in MINFLUX Nanoscopy.

New photoactivatable fluorescent dyes (rhodamine, carbo- and silicon-rhodamines [SiR]) with emission ranging from green to far red have been prepared, and their photophysical properties studied. The photocleavable 2-nitrobenzyloxycarbonyl unit with an alpha-carboxyl group as a branching point and additional functionality was attached to a polycyclic and lipophilic fluorescent dye. The photoactivatable probes having the HaloTagTM amine (O2) ligand bound with a dye core were obtained and applied for live-cell staining in stable cell lines incorporating Vimentin (VIM) or Nuclear Pore Complex Protein NUP96 fused with the HaloTag. The probes were applied in 2D (VIM, NUP96) and 3D (VIM) MINFLUX nanoscopy, as well as in superresolution fluorescence microscopy with single fluorophore activation (VIM, live-cell labeling). Images of VIM and NUPs labeled with different dyes were acquired and their apparent dimensions and shapes assessed on a lower single-digit nanometer scale. Applicability and performance of the photoactivatable dye derivatives were evaluated in terms of photoactivation rate, labeling and detection efficiency, number of detected photons per molecule and other parameters related to MINFLUX nanoscopy.

Supramolecular Complex of Photochromic Diarylethene and Cucurbit[7]uril: Fluorescent Photoswitching System for Biolabeling and Imaging.

Photoswitchable fluorophores─proteins and synthetic dyes─whose emission is reversibly switched on and off upon illumination, are powerful probes for bioimaging, protein tracking, and super-resolution microscopy. Compared to proteins, synthetic dyes are smaller and brighter, but their photostability and the number of achievable switching cycles in aqueous solutions are lower. Inspired by the robust photoswitching system of natural proteins, we designed a supramolecular system based on a fluorescent diarylethene (DAE) and cucurbit[7]uril (CB7) (denoted as DAE@CB7). In this assembly, the photoswitchable DAE molecule is encapsulated by CB7 according to the host-guest principle, so that DAE is protected from the environment and its fluorescence brightness and fatigue resistance in pure water improved. The fluorescence quantum yield (Φfl) increased from 0.40 to 0.63 upon CB7 complexation. The photoswitching of the DAE@CB7 complex, upon alternating UV and visible light irradiations, can be repeated 2560 times in aqueous solution before half-bleaching occurs (comparable to fatigue resistance of the reversibly photoswitchable proteins), while free DAE can be switched on and off only 80 times. By incorporation of reactive groups [maleimide and N-hydroxysuccinimidyl (NHS) ester], we prepared bioconjugates of DAE@CB7 with antibodies and demonstrated both specific labeling of intracellular proteins in cells and the reversible on/off switching of the probes in cellular environments under irradiations with 355 nm/485 nm light. The bright emission and robust photoswitching of DAE-Male3@CB7 and DAE-NHS@CB7 complexes (without exclusion of air oxygen and addition of any stabilizing/antifading reagents) enabled confocal and super-resolution RESOLFT (reversible saturable optical fluorescence transitions) imaging with apparent 70-90 nm optical resolution.

Cleavable Linker Incorporation into a Synthetic Dye-Nanobody-Fluorescent Protein Assembly: FRET, FLIM and STED Microscopy.

A bright and photostable fluorescent dye with a disulfide (S-S) linker and maleimide group (Rho594-S2-mal), as cleavable and reactive sites, was synthesized and conjugated with anti-GFP nanobodies (NB). The binding of EGFP (FRET donor) with anti-GFP NB labeled with one or two Rho594-S2-mal residues was studied in vitro and in cellulo. The linker was cleaved with dithiothreitol recovering the donor (FP) signal. The bioconjugates (FP-NB-dye) were applied in FRET-FLIM assays, confocal imaging, and superresolution STED microscopy.

Bis-Rhodamines Bridged with a Diazoketone Linker: Synthesis, Structure, and Photolysis.

Two fluorophores bound with a short photoreactive bridge are fascinating structures and remained unexplored. To investigate the synthesis and photolysis of such dyes, we linked two rhodamine dyes via a diazoketone bridge (-COCN2-) attached to position 5' or 6' of the pendant phenyl rings. For that, the mixture of 5'- or 6'-bromo derivatives of the parent dye was prepared, transformed into 1,2-diarylacetylenes, hydrated to 1,2-diarylethanones, and converted to diazoketones Ar1COCN2Ar2. The high performance liquid chromatography (HPLC) separation gave four individual regioisomers of Ar1COCN2Ar2. Photolysis of the model compound─C6H5COCN2C6H5─in aqueous acetonitrile at pH 7.3 and under irradiation with 365 nm light provided diphenylacetic acid amide (Wolff rearrangement). However, under the same conditions, Ar1COCN2Ar2 gave mainly α-diketones Ar1COCOAr2. The migration ability of the very bulky dye residues was low, and the Wolff rearrangement did not occur. We observed only moderate fluorescence increase, which may be explained by the insufficient quenching ability of diazoketone bridge (-COCN2-) and its transformation into another (weaker) quencher, 1,2-diarylethane-1,2-dione.

Triarylmethane Fluorophores Resistant to Oxidative Photobluing.

Spectral stability of small-molecule fluorescent probes is required for correct interpretation and reproducibility of multicolor fluorescence imaging data, in particular under high (de)excitation light intensities of super-resolution imaging or in single-molecule applications. We propose a synthetic approach to a series of spectrally stable rhodamine fluorophores based on sequential Ru- and Cu-catalyzed transformations, evaluate their stability against photobleaching and photoconversion in the context of other fluorophores using chemometric analysis, and demonstrate chemical reactivity of fluorophore photoproducts. The substitution patterns providing the photoconversion-resistant triarylmethane fluorophores have been identified, and the applicability of nonbluing labels in live-cell STED nanoscopy is demonstrated.

Reversibly Photoswitchable Fluorescent Diarylethenes Resistant against Photobleaching in Aqueous Solutions.

Low photostability in aqueous solutions is the main drawback of synthetic photochromic dyes, which limits their switching performance and utility in biology, medicine, and life sciences. Even the most promising photochromes-reversibly photoswitchable diarylethenes (DAEs) with fluorescent "closed" forms-are known to undergo only several tens (typically 20-30) of switching cycles in aqueous solutions. In this work, we introduce water-soluble and highly photostable 1,2-[bis(2-ethyl/2-isobutyl-1-benzothiophene-1,1-dioxide-6-phenyl-3-yl)]perfluorocyclopentenes decorated with four -CONHC(CH2R)3 residues capped with 12 carboxylic acid groups (R = CH2CO2H, O(CH2)2CO2H). Under irradiation with UV (365 nm) and visible light (470 nm), they provide several hundred (for the "rapid" DAEs with isobutyl groups, up to 1000) full switching cycles in aqueous solutions without exclusion of air oxygen (outperforming the photoswitchable and fluorescent protein Dreiklang). The new branching approach based on secondary carboxamides with N-tert-alkyl residues decorated with polar groups may serve as a blueprint for the design of highly fatigue resistant and reversibly photoswitchable fluorescent probes applicable in life sciences as aqueous solutions.

Mono- and bithiophene-substituted diarylethene photoswitches with emissive open or closed forms.

We present a new series of photochromic 1,2-bis(2-ethylbenzo[b]thiophen-3-yl)perfluorocyclopentenes with an oxidized benzothiophene core (O) or a nonoxidized one, decorated with mono- (Th1) and bithiophene (Th2) units attached to positions 6 and 6' (Sy = symmetric) or only to position 6 (As = asymmetric). "Oxidized" compounds have highly fluorescent closed forms emitting in the visible region (yellow to red). The dyes with nonoxidized benzothiophenes possess fluorescent open forms with rather low emission efficiency. The photoswitching kinetics was studied at several wavelengths with UV and visible light. New diarylethenes underwent ring-closure reactions by irradiation with UV light (365 nm, 405 nm), and the reversible ring-opening by irradiation with visible light (470 nm, 530 nm). The on-switching of fluorescence due to the ring-closure reaction was observed also with visible light of 470 nm (to an extent of 10% for compound SyOTh 1 ) and attributed to the Urbach tail effect. Due to a high degree of fluorescence modulation (>270), good fatigue resistance and large fluorescence quantum yield, compound SyOTh 1 emerged as a candidate for single-molecule based super-resolution fluorescence microscopy.

Photoactivatable Rhodamine Spiroamides and Diazoketones Decorated with "Universal Hydrophilizer" or Hydroxyl Groups.

Photoactivatable rhodamine spiroamides and spirocyclic diazoketones emerged recently as synthetic markers applicable in multicolor super-resolution microscopy. However, their applicability in single molecule localization microscopy (SMLM) is often limited by aggregation, unspecific adhesion, and low reactivity caused by insufficient solubility and precipitation from aqueous solutions. We report here two synthetic modifications increasing the polarity of compact polycyclic and hydrophobic labels decorated with a reactive group: attachment of 3-sulfo-l-alanyl-beta-alanine dipeptide (a "universal hydrophilizer") or allylic hydroxylation in photosensitive rhodamine diazoketones (and spiroamides). The super-resolution images of tubulin and keratin filaments in fixed and living cells exemplify the performance of "blinking" spiroamides derived from N, N, N', N'-tetramethyl rhodamine.

Fluorescent Photoswitchable Diarylethenes for Biolabeling and Single-Molecule Localization Microscopies with Optical Superresolution.

A modular assembly of water-soluble diarylethenes (DAEs), applicable as biomarkers for optical nanoscopy, is reported. Reversibly photoswitchable 1,2-bis(2-alkyl-6-phenyl-1-benzothiophene-1,1-dioxide-3-yl)perfluorocyclopentenes possessing a fluorescent "closed" form were decorated with one or two methoxy group(s) attached to the para-position(s) of phenyl ring(s) and two, four, or eight carboxylic acid groups. Antibody conjugates of these DAEs feature low aggregation, efficient photoswitching in aqueous buffers, specific staining of cellular structures, and photophysical properties (high emission efficiencies and low cycloreversion quantum yields) enabling their application in superresolution microscopy. Images of tubulin, vimentin, and nuclear pore complexes are presented. The superresolution images can also be acquired by using solely 488 nm light without additional photoactivation with UV light. These DAEs exhibit reversible photoswitching without requiring any additives to the imaging media and open new paths toward the modular design of fluorescent dyes for bioimaging with optical superresolution.

Bichromophoric Compounds with Orthogonally and Parallelly Arranged Chromophores Separated by Rigid Spacers.

Electronic energy transfer (EET) between chromophores is of fundamental importance for many biological processes and optoelectronic devices. However, common models fall short in fully describing the process, especially in bichromophoric model systems with a donor and acceptor connected by a rigid linker providing perpendicular geometries. Herein, we report a novel strategy for preparing bichromophores containing adamantane or 2-(2-adamantylidene)adamantane as rigid spacers, providing a fixed distance between chromophores, and their parallel or perpendicular arrangement without chromophore rotation. New fluorophores were developed and linked via spiroatoms. Bichromophores with identical (blue-blue) or different (blue-red) chromophores were synthesized, either in orthogonal or parallel geometry. These were characterized by absorption/fluorescence spectroscopy, time-resolved fluorescence anisotropy, and fluorescence antibunching measurements. Based on the Förster point-dipole approximation, EET efficiencies were estimated by using geometrical parameters from (time-dependent) density functional calculations. For bichromophores with parallel geometry, the predicted EET efficiencies were near unity and fit the measurements. In spite of estimated values around 0.4 and 0.5, 100 % efficiency was observed also for bichromophores with orthogonal geometry. The new rigid scaffolds presented here open new possibilities for the synthesis of bichormophores with well-defined parallel or perpendicular geometry.

"Reduced" Coumarin Dyes with an O-Phosphorylated 2,2-Dimethyl-4-(hydroxymethyl)-1,2,3,4-tetrahydroquinoline Fragment: Synthesis, Spectra, and STED Microscopy.

Large Stokes-shift coumarin dyes with an O-phosphorylated 4-(hydroxymethyl)-2,2-dimethyl-1,2,3,4-tetrahydroquinoline fragment emitting in the blue, green, and red regions of the visible spectrum were synthesized. For this purpose, N-substituted and O-protected 1,2-dihydro-7-hydroxy-2,2,4-trimethylquinoline was oxidized with SeO2 to the corresponding α,ß-unsaturated aldehyde and then reduced with NaBH4 in a "one-pot" fashion to yield N-substituted and 7-O-protected 4-(hydroxymethyl)-7-hydroxy-2,2-dimethyl-1,2,3,4-tetrahydroquinoline as a common precursor to all the coumarin dyes reported here. The photophysical properties of the new dyes ("reduced coumarins") and 1,2-dihydroquinoline analogues (formal precursors) with a trisubstituted C=C bond were compared. The "reduced coumarins" were found to be more photoresistant and brighter than their 1,2-dihydroquinoline counterparts. Free carboxylate analogues, as well as their antibody conjugates (obtained from N-hydroxysuccinimidyl esters) were also prepared. All studied conjugates with secondary antibodies afforded high specificity and were suitable for fluorescence microscopy. The red-emitting coumarin dye bearing a betaine fragment at the C-3-position showed excellent performance in stimulation emission depletion (STED) microscopy.

Carboxylated Photoswitchable Diarylethenes for Biolabeling and Super-Resolution RESOLFT Microscopy.

Reversibly photoswitchable 1,2-bis(2-ethyl-6-phenyl-1-benzothiophene-1,1-dioxide-3-yl)perfluorocyclopentenes (EBT) having fluorescent "closed" forms were decorated with four or eight carboxylic groups and attached to antibodies. Low aggregation, efficient photoswitching in aqueous buffers, specific staining of cellular structures, and good photophysical properties were demonstrated. Alternating light pulses of UV and blue light induce numerous reversible photochemical transformations between two stables states with distinct structures. Using relatively low light intensities, EBTs were applied in biology-related super-resolution microscopy based on the reversible saturable (switchable) optical linear fluorescence transitions (RESOLFT) and demonstrated optical resolution of 75 nm.

Mapping the fluorescence performance of a photochromic-fluorescent system coupled with gold nanoparticles at the single-molecule-single-particle level.

Single-molecule (SM) fluorescence microscopy was used to investigate the photochromic fluorescent system spiropyran-merocyanine (SP ↔ MC) interacting with gold nanoparticles (AuNPs). We observe a significant increase in the brightness of the emissive MC form, in the duration of its ON time, and in the total number of emitted photons. The spatial distribution of SMs with improved photophysical performance was obtained with 40 nm precision relative to the nearest AuNP. We demonstrate that even photochromic systems with poor photochemical performance for SM can become suitable for long time monitoring and high performance microscopy by interaction with metallic NP.

Masked rhodamine dyes of five principal colors revealed by photolysis of a 2-diazo-1-indanone caging group: synthesis, photophysics, and light microscopy applications.

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as "hidden" markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2-diazo-1-indanone group can be irreversibly photoactivated, either by irradiation with UV- or violet light (one-photon process), or by exposure to intense red light (λ∼750 nm; two-photon mode). All dyes possess a very small 2-diazoketone caging group incorporated into the 2-diazo-1-indanone residue with a quaternary carbon atom (C-3) and a spiro-9H-xanthene fragment. Initially they are non-colored (pale yellow), non-fluorescent, and absorb at λ=330-350 nm (molar extinction coefficient (ε)≈10(4) M(-1) cm(-1)) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511-633 and 525-653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε=3-8×10(4) M(-1) cm(-1) and fluorescence quantum yields (ϕ)=40-85% in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water-soluble caged red-emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino-reactive N-hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375-420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3-6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (ϕ=20-38%). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10-40% of the non-fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a "dark" non-emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super-resolution optical microscopy is exemplified.