Assessing the toxicity of contaminated soils via direct contact using a gas production bioassay of thiosulfate utilizing denitrifying bacteria (TUDB).

A direct contact bioassay of thiosulfate utilizing denitrifying bacteria (TUDB) based on inhibition of gas production was deployed to assess the toxicity of naturally contaminated field soils and soils artificially contaminated with heavy metals. Test procedure producing optimal conditions responsible for maximum gas production was 0.5 mL test culture, 1 g soil sample, 80 RPM, and 48 h reaction time. Similarly, the concentrations which generated a 50% reduction in gas production by TUDB for the tested heavy metals were 3.01 mg/kg Cr6+; 15.30 mg/kg Ni2+;15.50 mg/kg Cu2+;16.60 mg/kg Ag+; 20.60 mg/kg As3+; 32.80 mg/kg Hg2+; 54.70 mg/kg Cd2+; and 74.0 mg/kg Pb2+. Because soil toxicity is usually influenced by various physicochemical characteristics, ten reference soils were used to determine the toxicity threshold for evaluating the toxicity of naturally contaminated field soils. All eight contaminated soils were toxic to the TUDB bioassay because their levels of inhibition ranged between 72% and 100% and exceeded the determined toxicity threshold of 10%. Compared to other direct contact assays, the newly developed assay TUDB proved to be very robust, producing highly sensitive data while the different soil physicochemical properties exerted minimal influence on the gas production activity of TUDB. Additionally, the simplicity of the developed methodology coupled with the elimination of pretreatment procedures such as elutriation, and ability to perform generate sensitive data in turbid and highly colored samples makes it, cost-effective, and easily adaptable for the assessment of heavy metal and field contaminated soils when compared with other conventional assays which require sophisticated instrumentation and prolonged testing procedures and times.

Contributions of enhanced endogenous microbial metabolism via inoculation with a novel microbial consortium into an anoxic side-stream reactor to in-situ sludge reduction for landfill leachate treatment.

In-situ sludge reduction plays a significant role in reducing excess sludge production. This study investigated the role of beneficial microorganisms (BM) in the anoxic-oxic-settling-anoxic (A-OSA) process associated with the in-situ sludge reduction efficiency under synthetic landfill leachate treatment. The rates of excess sludge reduction with the inoculation of BM increased up to 53.6% (calculated as total suspended solids) and 38.3% (calculated as total volume), respectively. Side-stream reactors, as important components of the A-OSA process, were further studied to explore change of parameters related to in-situ sludge reduction. With the inoculation of BM, the release and conversion of extracellular polymeric substances and the dehydrogenase activity (increasing rate = 60.9%) were increased. Species richness and microbial diversity, as well as the microbial community composition (e.g., hydrolytic and fermentative bacteria), were improved via bioaugmentation. Moreover, potential gene functions of microorganisms were positively regulated and the abundance of gene expressions (e.g., nirK, norB) for in-situ sludge reduction could be improved.

Real-time biomonitoring of oxygen uptake rate and biochemical oxygen demand using a novel optical biogas respirometric system.

In response to the ever-increasing need for monitoring-based process control of wastewater treatment plants, an online applicable respirometer shows great promise for real-time measurement of oxygen uptake rate (OUR) and biochemical oxygen demand (BOD) measurements as a surrogate of the biodegradability of wastewater. Here, we have developed a photosensor-assisted real-time respirometric system equipped with bubble counting sensors for accurate measurement of microbial oxygen consumption in a bottle. This system can measure OUR and BOD in a bottle equipped with a tube containing NaOH solution to absorb carbon dioxide and supplied with continuous atmospheric oxygen to the bottle, which reliably supplies non-limiting dissolved oxygen (DO) for aerobic biodegradation even at high organic loads. These technical improvements allow a sensitive and rapid analytical tool offering real-time profiles of oxygen uptake rate as well as BOD measurements with an extended measurable range (0-420 mg O2/L), enabling significant reduction or elimination of dilution steps. The respirometric system was used to elucidate the biodegradable kinetics of domestic and swine wastewaters as a function of the type and concentration of organic matters, depending on source characteristics including rapidly or slowly oxidizable organic substances by bacteria. Compared with conventional and manometric BOD methods, our method is reliable and accurate.

Modified bentonite as a conditioning agent for stabilising heavy metals and retaining nutrients in sewage sludge for agricultural uses.

The management and disposal of excess sludge are emerging issues owing to the high costs associated with treatment. In this study, the viability of a modified bentonite was investigated as a conditioning agent for the stabilisation of heavy metals (i.e., Cu, Zn, Cr, Pb, and Cd) and the retention of nutrient species (i.e., total nitrogen (TN), total phosphorus (TP), available nitrogen (available N), and Olsen-phosphorus (Olsen-P)) in sewage sludge for agricultural use. Five grams of modified bentonite resulted in the highest stabilisation rate of heavy metals and strongly contributed to the stabilisation of heavy metals. However, increased amounts of modified bentonite might increase the TN, available N, and TP losses in the conditioned sewage sludge. Through the analytic hierarchy process modelling, optimal concentrations of nutrient species and heavy metals remaining in the conditioned sewage sludge were achieved when the ratio of bentonite to sewage sludge was 1:12.5 (4 g bentonite : 50 g sludge). Moreover, the optimal mixing ratio of the conditioned sewage sludge to the soil (1:2) was suggested for agricultural use. Based on these observations, modified bentonite allowed the sewage sludge to be used as a fertiliser in agriculture by stabilising heavy metals and retaining nutrient species.

Nitrite and nitrate as electron acceptors for bioelectrochemical ammonium oxidation under electrostatic field.

Bioelectrochemical ammonium oxidation with nitrite and nitrate as electron acceptors was investigated in bulk solution exposed to electrostatic field. In a bioelectrochemical reactor, electroactive nitrogen removal bacteria including ammonium oxidizing exoelectrogens (AOE) and denitrifying electrotrophs (DNE) were enriched by electrostatic field of 0.2 V/cm in a bulk solution containing nitrite, nitrate, and ammonium. Ammonium was oxidized simultaneously with decreases in nitrite and nitrate as electron acceptors due to direct interspecies electron transfer between AOE and DNE. The specific ammonium oxidation rate was 48 mg NH4-N/g VSS.d when nitrate fraction was 1/3 in the electron acceptor composed of nitrite and nitrate. The specific ammonium oxidation rate gradually decreased with increasing nitrate fraction. However, it was still 24 mg NH4-N/g VSS.d when nitrate was the only electron acceptor. This indicates that nitrate can be used as an electron acceptor for bioelectrochemical ammonium oxidation, although it is a less effective than nitrite. This finding provides an advantage that strict nitritation which selectively produces nitrite from ammonium can be avoided when treating ammonia-rich wastewater in a bioelectrochemical reactor.

Evaluation of foam-glass media in a high-rate filtration process for the removal of particulate matter containing phosphorus in municipal wastewater.

Foam-glass as an effective filter media in a high-rate filtration process was evaluated for the removal of particulate matter containing phosphorus in municipal wastewater. The foam-glass with a low sphericity exhibited a higher porosity (60.2%) and a lower apparent specific gravity (0.50 g/cm3) compared with a conventional sand media (35.1% and 1.19 g/cm3). In particular, the high porosity of the foam-glass increased its surface area for capturing particles with coagulation, leading to a significantly decreasing head loss in the filtration bed column, resulting in a significantly longer filtration duration (more than 2 times) and a slightly higher removal of contaminants (approximately 4.8% for a suspended solid and 2% for the total phosphorus). Additionally, while backwashing of the conventional sand media required about 30% of the bed volume, the low specific gravity of the foam-glass media could be expanded to 100% of the volume due to its lower energy demand. Based on these advantages, it is expected that the foam-glass media will have a vital role as an alternative media in high-rate filtration processes.

High-rate algal pond coupled with a matrix of Spirogyra sp. for treatment of rural streams with nutrient pollution.

This study evaluated the unique features of a filamentous algae matrix (FAM) that can be applied to high rate algal ponds (HRAPs) as a promising way to remove nutrient from polluted rural streams. The results show that the HRAPs, coupled with the FAM, effectively removed nitrogen and phosphorus (79.8% and 81.2%, respectively), and achieved high production of DO, with a maximum of 11.0 g O2 g FAM-1 d-1. The FAM functioned wells as a screen to prevent excessive algae loss from the system and obtained relatively high biomass growth rate (0.032 mg L-1 d-1 for nitrogen and 0.344 mg L-1 d-1 for phosphorus). The harvested FAM was a useful fertilizer and the rate of addition of FAM were 1.52 kg d-1 ha-1 of nitrogen and 0.44 kg d-1 ha-1 of phosphorus. Thus, combining the HRAP with the FAM was an effective nutrient removal and resource utilization system for rural streams.

Biochars derived from wasted marine macro-algae (Saccharina japonica and Sargassum fusiforme) and their potential for heavy metal removal in aqueous solution.

For the purpose of reusing wasted marine macro-algae generated during cultivation, harvesting, processing and selling processes, biochars derived from Saccharina japonica (known as kelp) and Sargassum fusiforme (known as hijikia) were characterized and their removal capacities for Cu, Cd, and Zn in aqueous solution were assessed. Feedstocks, S. japonica, S. fusiforme, and also pinewood sawdust as a control, were pyrolyzed at 250, 400, 500, 600 and 700 °C. In evaluating heavy metal removal capacities, SJB (S. japonica biochar) showed the best performance, with removal efficiencies of more than 98% for the three heavy metals when pyrolyzed at over 400 °C. SFB (S. fusiforme biochar) also showed good potential as an adsorbent, with removal efficiencies for the three heavy metals of more than 86% when pyrolyzed at over 500 °C. On the contrary, the maximum removal efficiencies of PSB (pinewood sawdust biochar) were 81%, 46%, and 47% for Cu, Cd, and Zn, respectively, even at 700 °C, the highest pyrolysis temperature. This demonstrates that marine macro-algae were advantageous in terms of production energy for removing heavy metals even at relatively low pyrolysis temperatures, compared with PSB. The excellent heavy metal adsorption capacities of marine macro-algae biochars were considered due to their higher pH and more oxygen-containing functional groups, although the specific surface areas of SJB and SFB were significantly lower than that of PSB. This research confirmed that the use of marine macro-algae as a heavy metal adsorbent was suitable not only in the removal of heavy metals, but also in terms of resource recycling and energy efficiency.

Physicochemical interactions between rhamnolipids and Pseudomonas aeruginosa biofilm layers.

This study investigated the physicochemical interactions between a rhamnolipid biosurfactant and a biofilm layer. A concentration of 300 µg mL(-1) of rhamnolipids, which is around the critical micelle concentration value (240 µg mL(-1)), showed great potential for reducing biofilm. The surface free energy between the rhamnolipids and biofilm layer decreased, as did the negative surface charge, due to the removal of negatively charged humic-like, protein-like, and fulvic acid-like substances. The carbohydrate and protein concentrations composed of extracellular polymeric substances decreased by 31.6% and 79.6%, respectively, at a rhamnolipid concentration of 300 µg mL(-1). In particular, rhamnolipids can interact with proteins, leading to a reduction of the N source and amide groups on the membrane. For carbohydrates, the component ratio of glucosamine was decreased, but the levels of glucose and mannose that form the majority of the carbohydrates remained unchanged. To our knowledge, the present study is the first attempt at studying the interactions of the two phases of rhamnolipids and the biofilm layer, and as such is expected to clarify the mechanism by which rhamnolipids lead to a reduction in biofilm.

Effect of initial salt concentrations on cell performance and distribution of internal resistance in microbial desalination cells.

Microbial desalination cells (MDCs) are modified microbial fuel cells (MFCs) that concurrently produce electricity and desalinate seawater, but adding a desalination compartment and an ion-exchange membrane may increase the internal resistance (Ri), which can limit the cell performance. However, the effects of a desalination chamber and initial NaCl concentrations on the internal resistances and the cell performances (i.e. Coulombic efficiency (CE), current and power density) of MDCs have yet to be thoroughly explored; thus, the cell performance and Ri distributions of MDCs having different initial concentrations and an MFC having no desalination chamber were compared. In the MDCs, the current and power density generation increased from 2.82 mA and 158.2 mW/m2 to 3.17 mA and 204.5 mW/m2 when the initial NaCl concentrations were increased from 5 to 30 g/L, as a consequence of the internal resistances decreasing from 2432.0 to 2328.4 Ω. And even though the MFC has a lower Ri than the MDCs, lower cell performances (current: 2.59 mA; power density: 141.6 mW/m2 and CE: 62.1%) were observed; there was no effect of improved junction potential in the MFC. Thus, in the MDCs, the higher internal resistances due to the addition of a desalination compartment can be offset by reducing the electrolyte resistance and improving the junction potential at higher NaCl concentrations.

Optimizing electrochemically active microorganisms as a key player in the bioelectrochemical system: Identification methods and pathways to large-scale implementation.

The rapid global economic growth driven by industrialization and population expansion has resulted in significant issues, including reliance on fossil fuels, energy scarcity, water crises, and environmental emissions. To address these issues, bioelectrochemical systems (BES) have emerged as a dual-purpose solution, harnessing electrochemical processes and the capabilities of electrochemically active microorganisms (EAM) to simultaneously recover energy and treat wastewater. This review examines critical performance factors in BES, including inoculum selection, pretreatment methods, electrodes, and operational conditions. Further, authors explore innovative approaches to suppress methanogens and simultaneously enhance the EAM in mixed cultures. Additionally, advanced techniques for detecting EAM are discussed. The rapid detection of EAM facilitates the selection of suitable inoculum sources and optimization of enrichment strategies in BESs. This optimization is essential for facilitating the successful scaling up of BES applications, contributing substantially to the realization of clean energy and sustainable wastewater treatment. This analysis introduces a novel viewpoint by amalgamating contemporary research on the selective enrichment of EAM in mixed cultures. It encompasses identification and detection techniques, along with methodologies tailored for the selective enrichment of EAM, geared explicitly toward upscaling applications in BES.

Paradigm shift in Nutrient-Energy-Water centered sustainable wastewater treatment system through synergy of bioelectrochemical system and anaerobic digestion.

With advancements in research and the necessity of improving the performance of bioelectrochemical system (BES), coupling anaerobic digestion (AD) with BES is crucial for energy gain from wastewater and bioremediation. Hybridization of BES-AD concept opens new avenues for pollutant degradation, carbon capture and nutrient-resource recovery from wastewater. The strength of merging BES-AD lies in synergy, and this approach was employed to differentiate fads from strategies with the potential for full-scale implementation and making it an energy-positive system. The integration of BES and AD system increases the overall performance and complexity of combined system and the cost of operation. From a technical standpoint, the primary determinants of BES-AD feasibility for field applications are the scalability and economic viability. High potential market for such integrated system attract industrial partners for more industrial trials and investment before commercialization. However, BES-AD with high energy efficacy and negative economics demands performance boost.

Membrane processes for environmental remediation of nanomaterials: Potentials and challenges.

Nanomaterials have gained huge attention with their wide range of applications. This is mainly driven by their unique properties. Nanomaterials include nanoparticles, nanotubes, nanofibers, and many other nanoscale structures have been widely assessed for improving the performance in different applications. However, with the wide implementation and utilization of nanomaterials, another challenge is being present when these materials end up in the environment, i.e. air, water, and soil. Environmental remediation of nanomaterials has recently gained attention and is concerned with removing nanomaterials from the environment. Membrane filtration processes have been widely considered a very efficient tool for the environmental remediation of different pollutants. Membranes with their different operating principles from size exclusions as in microfiltration, to ionic exclusion as in reverse osmosis, provide an effective tool for the removal of different types of nanomaterials. This work comprehends, summarizes, and critically discusses the different approaches for the environmental remediation of engineered nanomaterials using membrane filtration processes. Microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) have been shown to effectively remove nanomaterials from the air and aqueous environments. In MF, the adsorption of nanomaterials to membrane material was found to be the main removal mechanism. While in UF and NF, the main mechanism was size exclusion. Membrane fouling, hence requiring proper cleaning or replacement was found to be the major challenge for UF and NF processes. While limited adsorption capacity of nanomaterial along with desorption was found to be the main challenges for MF.

Membrane-based carbon capture: Recent progress, challenges, and their role in achieving the sustainable development goals.

The rapid growth in the consumption of fossil fuels resulted in climate change and severe health issues. Among the different proposed methods to control climate change, carbon capture technologies are the best choice in the current stage. In this study, the various membrane technologies used for carbon capture and their impact on achieving sustainable development goals (SDGs) are discussed. Membrane-based carbon capture processes in pre-combustion and post-combustion, which are known as membrane gas separation (MGS) and membrane contactor (MC), respectively, along with the process of fabrication and the different limitations that hinder their performances are discussed. Additionally, the 17 SDGs, where each representing a crucial topic in the current global task of a sustainable future, that are impacted by membrane-based carbon capture technologies are discussed. Membrane-based carbon capture technologies showed to have mixed impacts on different SDGs, varying in intensity and usefulness. It was found that the membrane-based carbon capture technologies had mostly influenced SDG 7 by enhancement in the zero-emission production, SDG 9 by providing 38-42% cost savings compared to liquid absorption, SDG 3 through reducing pollution and particulate matter emissions by 23%, and SDG 13, with SDG 13 being the most positively influenced by membrane-based carbon capture technologies, as they significantly reduce the CO2 emissions and have high CO2 capture yields (80-90%), thus supporting the objectives of SDG 13 in combatting climate change.

Tailoring a highly conductive and super-hydrophilic electrode for biocatalytic performance of microbial electrolysis cells.

Bioelectrochemical hydrogen production via microbial electrolysis cells (MECs) has attracted attention as the next generation of technology for the hydrogen economy. MECs work by electrochemically active bacteria reducing organic compounds at the anode. However, the hydrophobic nature of carbon-based anodes suppresses the release of the produced gas and water penetration, which significantly reduces the possibility of microbial attachment. Consequently, a limited surface area of the anode is used, which decreases hydrogen production efficiency. In this study, the bifunctional material poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) was applied to the surface of a three-dimensional carbon felt anode to enhance the hydrogen production efficiency of an MEC owing to the high conductivity of PEDOT and super-hydrophilicity of PSS. In experiments, the PEDOT:PSS-modified anode almost doubled the hydrogen production efficiency of the MEC compared with the control anode owing to the increased capacitance current (239.3 %) and biofilm formation (220.7 %). The modified anode reduced the time required for the MEC to reach a steady state of hydrogen production by 14 days compared to the control anode. Microbial community profiles demonstrated that the modified anode had a greater abundance of electrochemically active bacteria than the control anode. This simple method could be widely applied to various bioelectrochemical systems (e.g., microbial fuel cells and solar cells) and to scaling up MECs.

Membrane-based water and wastewater treatment technologies: Issues, current trends, challenges, and role in achieving sustainable development goals, and circular economy.

Membrane-based technologies are recently being considered as effective methods for conventional water and wastewater remediation processes to achieve the increasing demands for clean water and minimize the negative environmental effects. Although there are numerous merits of such technologies, some major challenges like high capital and operating costs . This study first focuses on reporting the current membrane-based technologies, i.e., nanofiltration, ultrafiltration, microfiltration, and forward- and reverse-osmosis membranes. The second part of this study deeply discusses the contributions of membrane-based technologies in achieving the sustainable development goals (SDGs) stated by the United Nations (UNs) in 2015 followed by their role in the circular economy. In brief, the membrane based processes directly impact 15 out of 17 SDGs which are SDG1, 2, 3, 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16 and 17. However, the merits, challenges, efficiencies, operating conditions, and applications are considered as the basis for evaluating such technologies in sustainable development, circular economy, and future development.

Fabrication and Performance Evaluation of a Cation Exchange Membrane Using Graphene Oxide/Polyethersulfone Composite Nanofibers.

Ion exchange membranes, especially cation exchange membranes (CEMs), are an important component in membrane-based energy generation and storage because of their ability to transport cations via the electrochemical potential gradient while preventing electron transport. However, developing a CEM with low areal resistance, high permselectivity, and stability remains difficult. In this study, electrospun graphene oxide/polyethersulfone (GO/PES) composite nanofibers were prepared with varying concentrations of GO. To fabricate a CEM, the pores of the electrospun GO/PES nanofiber substrates were filled with a Nafion ionomer. The pore-filled PES nanofiber loaded with 1% GO revealed a noticeable improvement in hydrophilicity, structural morphology, and mechanical properties. The 1% GO/PES pore-filled CEM was compared to a Nafion membrane of a varying thickness and without a nanofiber substrate. The CEM with a nanofiber substrate showed permselectivity of 85.75%, toughness of 111 J/m3, and areal resistance of 3.7 Ω cm2, which were 12.8%, 4.3 times, and 4.0 times better, respectively, than those of the Nafion membrane at the same thickness. The development of a reinforced concrete-like GO/PES nanofiber structure containing stretchable ionomer-enhanced membrane surfaces exhibited suitable areal resistance and reduced the thickness of the composite membrane without compromising the mechanical strength, suggesting its potential application as a cation exchange membrane in electrochemical membrane-based systems.

Pretreatments of lignocellulosic and algal biomasses for sustainable biohydrogen production: Recent progress, carbon neutrality, and circular economy.

Lignocellulosic and algal biomasses are known to be vital feedstocks to establish a green hydrogen supply chain toward achieving a carbon-neutral society. However, one of the most pressing issues to be addressed is the low digestibility of these biomasses in biorefinery processes, such as dark fermentation, to produce green hydrogen. To date, various pretreatment approaches, such as physical, chemical, and biological methods, have been examined to enhance feedstock digestibility. However, neither systematic reviews of pretreatment to promote biohydrogen production in dark fermentation nor economic feasibility analyses have been conducted. Thus, this study offers a comprehensive review of current biomass pretreatment methods to promote biohydrogen production in dark fermentation. In addition, this review has provided comparative analyses of the technological and economic feasibility of existing pretreatment techniques and discussed the prospects of the pretreatments from the standpoint of carbon neutrality and circular economy.

Proapoptotic effect of a micropollutant (tris-(2-chloroethyl)-phosphate) at environmental level in primary cultured renal proximal tubule cells.

Being a typical micropollutant, tris-(2-chloroethyl)-phosphate (TCEP) is often found in aquatic environments. However, the potential effects of TCEP at environmental concentrations on apoptotic mechanisms are mostly unknown. Thus, the purpose of this study is to investigate the apoptotic regulatory protein expression of TCEP at environmental concentration in primary cultured renal proximal tubule cells (PTCs). The results show that TCEP at 0.01 and 1 mg L(-1) significantly increased the phosphorylation of c-Jun-NH2-terminal kinase (JNK) (135.5 and 138.0% of the control, respectively), and significantly decreased the expression of Bcl-2 and cIAP-2 at all tested concentrations, except for a slight decrease of Bcl-2 at 0.01 mg L(-1). In addition, TCEP significantly increased the expression of caspase-3 at all three concentrations (132.6, 172.6 and 167.9% of the control, respectively) and caspase-9 at 1 and 10 mg L(-1) (128.3 and 144.5% of the control, respectively). Furthermore, TCEP increased the apoptotic cell population in a flow cytometry analysis. In conclusion, environmental TCEP might have a dose-dependent proapoptotic effect with a decrease of DNA synthesis and cell number in primary cultured renal PTCs.

Spatial distribution and viability of nitrifying, denitrifying and ANAMMOX bacteria in biofilms of sponge media retrieved from a full-scale biological nutrient removal plant.

The spatial distribution and activities of nitrifying and denitrifying bacteria in sponge media were investigated using diverse tools, because understanding of in situ microbial condition of sponge phase is critical for the successful design and operation of sponge media process. The bacterial consortia within the media was composed of diverse groups including a 14.5% Nitrosomonas spp.-like ammonia oxidizing bacteria (AOB), 12.5% Nitrobacter spp.-like nitrite oxidizing bacteria (NOB), 2.0% anaerobic ammonium-oxidizing (ANAMMOX) bacteria and 71.0% other bacteria. The biofilm appeared to be most dense in the relatively outer region of the media and gradually decreased with depth, but bacterial viabilities showed space-independent feature. The fluorescent in situ hybridization results revealed that AOB and NOB co-existed in similar quantities on the side fragments of the media, which was reasonably supported by the microelectrode measurements showing the concomitant oxidation of NH(4) (+) and production of NO(3) (-) in this zone. However, a significantly higher fraction of AOB was observed in the center than side fragment. As with the overall biofilm density profile, the denitrifying bacteria were also more abundant on the side than in the center fragments. ANAMMOX bacteria detected throughout the entire depth offer another advantage for the removal of nitrogen by simultaneously converting NH(4) (+) and NO(2) (-) to nitrogen gas.