A genome-wide association scan reveals novel loci for facial traits of Koreans.

DNA-based prediction of externally visible characteristics (EVC) with SNPs is one of the research areas of interest in the forensic field. Based on a previous study performing GWAS on facial traits in a Korean population, herein, we present results stemming from GWA analysis with KoreanChip and novel genetic loci satisfying genome-wide significant level. We discovered a total of 20 signals and 12 loci were found to have novel associations with facial traits, including six loci located in intergenic regions and six loci located at UBE2O, HECTD2, CCDC108, TPK1, FCN2, and FRMPD1. Additionally, we performed a polygenic score analysis for 33 distance-related traits in facial phenotyping and determined genetic relationships between facial traits and SNPs using the GCTA program. The results of the current study offer an understanding of how facial morphology is influenced by complex genetic structures and provide insights into forensic investigation and population genetics.

TLR3/TRIF pathway confers protection against herpes simplex encephalitis through NK cell activation mediated by a loop of type I IFN and IL-15 from epithelial and dendritic cells.

Autosomal recessive (AR) and dominant (AD) deficiencies of TLR3 and TRIF are believed to be crucial genetic causes of herpes simplex encephalitis (HSE), which is a fatal disease causing focal or global cerebral dysfunction following infection with herpes simplex virus type 1 (HSV-1). However, few studies have been conducted on the immunopathological networks of HSE in the context of TLR3 and TRIF defects at the cellular and molecular levels. In this work, we deciphered the crosstalk between type I IFN (IFN-I)-producing epithelial layer and IL-15-producing dendritic cells (DC) to activate NK cells for the protective role of TLR3/TRIF pathway in HSE progression after vaginal HSV-1 infection. TLR3- and TRIF-ablated mice showed enhanced susceptibility to HSE progression, along with high HSV-1 burden in vaginal tract, lymphoid tissues and CNS. The increased HSV-1 burden in TLR3- and TRIF-ablated mice did not correlate with increased infiltration of Ly-6C+ monocytes, but it was closely associated with impaired NK cell activation in vaginal tract. Furthermore, using delicate ex vivo experiments and bone marrow transplantation, TRIF deficiency in tissue-resident cells, such as epithelial cells in vaginal tract, was found to cause impaired NK cell activation by means of low IFN-I production, whereas IFN-I receptor in DC was required for NK cell activation via IL-15 production in response to IFN-I produced from epithelial layer. These results provide new information about IFN-I- and IL-15-mediated crosstalk between epithelial cells and DC at the primary infection site, which suppresses HSE progression in a TLR3- and TRIF-dependent manner.

Frequency of actionable secondary findings in 7472 Korean genomes derived from the National Project of Bio Big Data pilot study.

Exome and genome sequencing (ES/GS) in genetic medicine and research leads to discovering genomic secondary findings (SFs) unrelated to the purpose of the primary test. There is a lack of agreement to return the SF results for individuals undergoing the test. The aim of this study is to investigate the frequency of actionable secondary findings using GS data obtained from the rare disease study and the Korean Genome and Epidemiology Study (KoGES) in the National Project of Bio Big Data pilot study. Pathogenic (P) or likely pathogenic (LP) variants of 78 SF genes recommended by the American College of Medical Genetics and Genomics (ACMG) were screened in the rare disease study and KoGES. The pathogenicity of SF gene variants was determined according to the ACMG interpretation. The overall SF rate was 3.75% for 280 individuals with 298 P/LP variants of 41 ACMG SF genes which were identified among 7472 study participants. The frequencies of genes associated with cardiovascular, cancer, and miscellaneous phenotypes were 2.17%, 1.22%, and 0.58%, respectively. The most frequent SF gene was TTN followed by BRCA2. The frequency of actionable SFs among participants with rare disease and general population participants in the Korean population presented here will assist in reporting results of medically actionable SFs in genomic medicine.

Genetic variants of FGFR family associated with height, hypertension, and osteoporosis.

BACKGROUND: Hypertension and osteoporosis are the most common types of health problems. A recent study suggested that the fibroblast growth factor receptor-like protein 1 (FGFRL1) gene in giraffes is the most promising candidate gene that may have direct effects on both the skeleton and the cardiovascular system. AIM: Our study purposed to replicate the finding that the FGFR5 gene is related to giraffe-related characteristics (height, hypertension, and osteoporosis), and to assess the associations between genetic variants of the FGFR family and three phenotypes. SUBJECTS AND METHODS: An association study was performed to confirm the connections between hypertension, osteoporosis, and height and the FGFR family proteins (FGFR1 to FGFR5). RESULTS: We identified a total of 192 genetic variants in the FGFR family and found six SNVs in the FGFR2, FGFR3, and FGFR4 genes that were associated with two phenotypes simultaneously. Also, the FGFR family was found to be involved in calcium signalling, and three genetic variants of the FGFR3 gene showed significant signals in the pituitary and hypothalamus. CONCLUSION: Taken together, these findings suggest that FGFR genes are associated with hypertension, height, and osteoporosis. In particular, the present study highlights the FGFR3 gene, which influences two fundamental regulators of bone remodelling.

The interaction between FTO rs9939609 and physical activity is associated with a 2-fold reduction in the risk of obesity in Korean population.

OBJECTIVE: FTO (fat mass and obesity-associated) gene is a well-known genetic risk factor for obesity. We investigated whether physical activity modulates the effect of FTO rs9939609 on obesity in Korean population. METHODS: The study analyzed the correlation between physical activity and obesity in 8840 individuals representing the Korea Association Resource (KARE). The association between obesity-related traits and single-nucleotide polymorphisms (SNPs) was assessed using linear regression models. Physical activity was defined as 3 hours or more of daily intense activity. RESULTS: Participants carrying rs9939609 (AT+AA) genotypes showed higher BMI compared with those carrying the wild-type (TT) homozygote. The highest significant association was observed between obesity-related traits (ß = .334, P value = 1.76 × 10-6 ). FTO rs9939609 (AT+AA) increased the risk of obesity (OR = 1.42, CI [1.13-1.79]), which was correlated with BMI correlations. However, active exercise by subjects carrying the same genotype reduced the risk of obesity by nearly 2-fold (OR = 0.62, CI [0.25-0.84]). In contrast, TT genotype was not statistically significant in reducing the risk of obesity in the active exercise group. CONCLUSIONS: Our results support a previous finding correlating FTO and obesity-related traits and suggest that the interaction with genetic variation and physical activity is an important risk factor for obesity.

Structure-Activity Relationship of Phytoestrogen Analogs as ERα/ß Agonists with Neuroprotective Activities.

A set of isoflavononid and flavonoid analogs was prepared and evaluated for estrogen receptor α (ERα) and ERß transactivation and anti-neuroinflammatory activities. Structure-activity relationship (SAR) study of naturally occurring phytoestrogens, their metabolites, and related isoflavone analogs revealed the importance of the C-ring of isoflavonoids for ER activity and selectivity. Docking study suggested putative binding modes of daidzein 2 and dehydroequol 8 in the active site of ERα and ERß, and provided an understanding of the promising activity and selectivity of dehydroequol 8. Among the tested compounds, equol 7 and dehydroequol 8 were the most potent ERα/ß agonists with ERß selectivity and neuroprotective activity. This study provides knowledge on the SAR of isoflavonoids for further development of potent and selective ER agonists with neuroprotective potential.

Association between non-Caucasian-specific ASCC1 gene polymorphism and osteoporosis and obesity in Korean postmenopausal women.

INTRODUCTION: Osteoporosis is a common disorder characterized by decreased bone mineral density (BMD). Interestingly, osteoporosis and obesity have several similar features, including a genetic predisposition and a common bone marrow stem cell. With aging, the composition of bone marrow shifts to adipocytes, osteoclast activity increases, and osteoblast function declines, resulting in osteoporosis. MATERIALS AND METHODS: We performed a genome-wide association study (GWAS) analysis with osteoporosis and body mass index (BMI) and did identify an association in 349 and 384 SNPs by filtering with the significant p values (p < 0.001) of BMI and osteoporosis, respectively. RESULTS: Only three of those SNPs were common (rs2326365, rs7097028, and rs11000205) between the SNPs significantly associated with BMI and/or osteoporosis in Korean Association REsource (KARE) females. Two of the three SNPs belonged to the ASCC1 gene and one to the FAM50B gene. We carried out a minor allele frequency (MAF) analysis of the rs7097028 and rs11000205 SNPs in the ASCC1 gene with a geographic genome variant browser. Both rs7097028 and rs11000205 in the ASCC1 gene were seen mostly in African and Southeast Asian populations. CONCLUSIONS: Our results suggest that the ASCC1 gene is a significant genetic factor for determining the risk for both osteoporosis and obesity in KARE postmenopausal females.

Effect of digital scans on marginal and internal discrepancies of zirconia crowns.

STATEMENT OF PROBLEM: A few studies have compared the accuracy of newly introduced intraoral scanners (IOSs); however, limited evidence is available concerning which system provides the best marginal and internal adaptation of zirconia crowns. PURPOSE: The purpose of this in vitro study was to compare the marginal and internal discrepancies of zirconia crowns fabricated with 4 digital scanners by a silicone replica technique. MATERIAL AND METHODS: A maxillary central incisor was prepared for a ceramic crown and duplicated to form 10 metal abutments. Four groups of zirconia crowns with different scanning methods were produced for each die: 1 laboratory scanner, L (Ceramill Map 400), and 3 different IOSs, CS (CS3600), TR (TRIOS3), and CE (CEREC Omnicam). The marginal and internal discrepancies were measured by a silicone replica technique under a static load of 50 N. The replica specimens were sectioned buccolingually and mesiodistally and then examined by using a stereomicroscope (JTZ-7XT) at ×200 magnification. Fifteen reference points were measured on each specimen. One-way ANOVAs with the Duncan multiple range tests were used for statistical analysis of the data (α=.05). RESULTS: The mean marginal discrepancies of zirconia crowns were 12.7 µm for group L, 12.6 µm for group CS, 14.8 µm for group TR, and 15.8 µm for group CE. No significant differences were found in marginal and incisal discrepancies among 4 groups. However, groups CS and L showed significantly better cervical and axial discrepancies than groups TR and CE. Group TR showed significantly better axial discrepancy than group CE. CONCLUSIONS: Zirconia crowns made by using the CS3600 and the laboratory scanner with a conventional impression showed significantly better internal discrepancies than those made by using TRIOS3 and CEREC Omnicam.

Reinforcing effect of glass-fiber mesh on complete dentures in a test model with a simulated oral mucosa.

STATEMENT OF PROBLEM: Studies that evaluated the strength of complete dentures reinforced with glass-fiber mesh or metal mesh on a cast with a simulated oral mucosa are lacking. PURPOSE: The purpose of this in vitro study was to compare the mechanical properties of maxillary complete dentures reinforced with glass-fiber mesh with those of metal mesh in a new test model, using a simulated oral mucosa. MATERIAL AND METHODS: Complete dentures reinforced with 2 types of glass-fiber mesh, SES mesh (SES) and glass cloth (GC) and metal mesh (metal) were fabricated. Complete dentures without any reinforcement were prepared as a control (n=10). The complete dentures were located on a cast with a simulated oral mucosa, and a load was applied on the posterior artificial teeth bilaterally. The fracture load, elastic modulus, and toughness of a complete denture were measured using a universal testing machine at a crosshead speed of 5 mm/min. The fracture load and elastic modulus were analyzed using 1-way analysis of variance, and the toughness was analyzed with the Kruskal-Wallis test (α=.05). The Tukey multiple range test was used as a post hoc test. RESULTS: The fracture load and toughness of the SES group was significantly higher than that of the metal and control groups (P<.05) but not significantly different from that of the GC group. The elastic modulus of the metal group was significantly higher than that of the control group (P<.05), and no significant differences were observed in the SES and GC groups. CONCLUSIONS: Compared with the control group, the fracture load and toughness of the SES and GC groups were higher, while those of the metal group were not significantly different.

Fit of lithium disilicate crowns fabricated from conventional and digital impressions assessed with micro-CT.

STATEMENT OF PROBLEM: Although the number of lithium disilicate crowns fabricated with computer-aided design and computer-aided manufacturing (CAD-CAM) technology has increased, the accuracy of the prostheses produced by using digital pathways remains unknown. PURPOSE: The purpose of this in vitro study was to compare marginal and internal discrepancies of lithium disilicate crowns fabricated from digital and conventional impressions. MATERIAL AND METHODS: A typodont mandibular first molar was prepared for a lithium disilicate crown, and 20 duplicate dies were fabricated by milling poly(methyl methacrylate) resin blocks from laboratory scans. Four groups of 5 lithium disilicate crowns each were created by using a CS3500 (Carestream Dental) intraoral digital impression; Trios (3shape) intraoral digital impression; Ceramill Map400 (Amann Girrbach) extraoral digital impression; and a heat-press technique as a control group. All of the IPS e.max CAD (Ivoclar Vivadent AG) crowns were produced using a 5-axis milling engine (Ceramill Motion2). The lithium disilicate crowns were cemented with zinc phosphate cement under finger pressure. Marginal and internal discrepancies were measured using micro-computed tomography (SkyScan1172). One-way ANOVAs with the Tukey honest significant differences test were used for statistical analysis of the data (α=.05). RESULTS: The mean marginal discrepancies of CS3500 lithium disilicate crowns were 129.6 µm, 200.9 µm for Ceramill Map400, and 207.8 µm 176.1 µm for the heat-press technique; and the internal discrepancy volumes for CS3500 were 25.3 mm3, 40.7 mm3 for Trios, 29.1 mm3 for Ceramill Map400, and 29.1 and 31.4 mm3 for the heat-press technique. The CS3500 group showed a significantly better marginal discrepancy than the other 3 groups and a smaller internal discrepancy volume than the Trios group (P<.05). CONCLUSIONS: Significant differences were found between IPS e.max CAD crowns produced using 2 intraoral digital impressions, whereas no differences were found between IPS e.max CAD crowns produced from an extraoral digital impression and IPS e.max Press crowns produced using a heat-press technique.

Effect of implant number and distribution on load transfer in implant-supported partial fixed dental prostheses for the anterior maxilla: A photoelastic stress analysis study.

STATEMENT OF PROBLEM: The 4-, 3- or even 2-implant-supported partial fixed dental prosthesis (PFDP) designs have been used to rehabilitate the anterior edentulous maxilla. PURPOSE: The purpose of this in vitro study was to compare the stress distribution in the supporting tissues surrounding implants placed in the anterior maxilla with 5 PFDP designs. MATERIAL AND METHODS: A photoelastic model of the human maxilla with an anterior edentulous region was made with photoelastic resin (PL-2; Vishay Micro-Measurements), and 6 straight implants (OsseoSpeed; Astra Tech AB) were placed in the 6 anterior tooth positions. The 5 design concepts based on implant location were as follows: model 6I: 6 implants; model 2C2CI: 4 implants (2 canines and 2 central incisors); model 2C2LI: 4 implants (2 canines and 2 lateral incisors); model 2C1CI: 3 implants (2 canines and 1 central incisor); and model 2C: 2 canines. A load of 127.4 N was applied on the cingulum of 3 teeth at a 30-degree angle to the long axis of the implant. Stresses that developed in the supporting structure were recorded photographically. RESULTS: The 6-implant-supported PFDP exhibited the most even and lowest distribution of stresses in all loading conditions. When the canine was loaded, the 2- or 3-implant-supported PFDP showed higher stresses around the implant at the canine position than did the 4- or 6-implant-supported PFDP. When the central incisor or lateral incisor was loaded, the two 4-implant-supported PFDPs exhibited similar levels of stresses around the implants and showed lower stresses than did the 2- or 3-implant-supported PFDP. CONCLUSIONS: Implant number and distribution influenced stress distribution around the implants in the anterior maxilla. With a decrease in implant number, the stresses around the implants increased.

Effects of glass fiber mesh with different fiber content and structures on the compressive properties of complete dentures.

STATEMENT OF PROBLEM: No study has yet evaluated the strength of complete dentures reinforced with glass fiber meshes with different content and structures. PURPOSE: The purpose of this study was to compare the reinforcing effects of glass fiber mesh with different content and structures with that of metal mesh in complete dentures. MATERIAL AND METHODS: Two types of glass fiber mesh were used: SES mesh (SES) and glass cloth (GC2, GC3, and GC4). A metal mesh was used for comparison. The complete dentures were made by placing the reinforcement 1 mm away from the tissue surface. A control group was prepared without any reinforcement (n=10). The compressive properties were measured by a universal testing machine at a crosshead speed of 5 mm/min. The results were analyzed with the Kruskal-Wallis test and the Duncan multiple range test (α=.05). RESULTS: The fracture resistance of the SES group was significantly higher than that of the control, GC4, and metal groups (asymptotic P=.004), but not significantly different from the GC2 and GC3 groups. The toughness of the SES and GC3 groups was significantly higher than that of the others (asymptotic P<.001), but not significantly different from that of the GC4 group. CONCLUSIONS: SES and GC3, which have different structures but similar volume content, were the most effective in reinforcing complete dentures. The content of the glass fiber mesh seemed more important than the structures.

Effect of genetic variants in UBE2O and TPK1 on facial morphology of Koreans.

Human face is a highly heritable and complex trait. Many genome-wide analyses have identified genetic variants influencing facial morphology. Genome-wide association studies (GWASs) investigating facial morphologies of different populations provide a comprehensive insight into the genetic basis of the human face. Here, we report a GWAS of normal facial variation in Koreans using an array optimized for the Korean population (KoreanChip). We found that novel genetic variants encompassing four loci reached the genome-wide significance threshold. They include LOC107984547, UBE2O, TPK1, and LINC01148 loci associated with facial angle, brow ridge protrusion, nasal height, and eyelid curvature. Our results also validated previously published genetic loci, including FAT4, SOX9, and TBX3 loci. All confirmed genetic variants showed phenotypic differences involving each facial trait based on the effect of the minor allele. The present study highlights genetic signals associated with normal human facial variation and provides candidates for functional studies. Key points: GWAS of normal facial variation in the Korean population was conducted using a Korean genome chip.Previously reported genetic signals associated with FAT4, SOX9, and TBX3 loci were replicated in the Korean populations.Genetic signals in UBE2O and TPK1 loci were identified as novel variants for corresponding facial features.

Enzymatic time-temperature indicator with cysteine-loaded chitosan microspheres/silver nanoparticles.

A time-temperature indicator (TTI) based on acid-base reaction was developed by applying a new pH dye composed of cysteine-loaded chitosan (Cys-CS) microspheres and silver nanoparticles (AgNPs). It was hypothesized that cysteine released by the disintegration of Cys-CS microspheres at a critical pH would cause AgNPs to aggregate, leading to color change. Cys-CS microspheres were produced as water-in-oil (paraffin oil, MCT oil, soybean oil) emulsions according to the KOH addition method. An enzymatic TTI was made using glucose oxidase, glucose, and catalase. Only paraffin oil produced Cys-CS microspheres (average diameter, 335 ± 100 µm), whereas the others did not, probably due to saponification with KOH. FTIR analysis confirmed that cysteine was encapsulated in the microspheres. The microspheres disintegrated at pH 6.18 in a titration test. The TTI pH gradually decreased and showed a sudden color change at pH 6.10, which was similar to the critical pH of microsphere disintegration.

Molecular orientation-dependent energetic shifts in solution-processed non-fullerene acceptors and their impact on organic photovoltaic performance.

The non-fullerene acceptors (NFAs) employed in state-of-art organic photovoltaics (OPVs) often exhibit strong quadrupole moments which can strongly impact on material energetics. Herein, we show that changing the orientation of Y6, a prototypical NFA, from face-on to more edge-on by using different processing solvents causes a significant energetic shift of up to 210 meV. The impact of this energetic shift on OPV performance is investigated in both bilayer and bulk-heterojunction (BHJ) devices with PM6 polymer donor. The device electronic bandgap and the rate of non-geminate recombination are found to depend on the Y6 orientation in both bilayer and BHJ devices, attributed to the quadrupole moment-induced band bending. Analogous energetic shifts are also observed in other common polymer/NFA blends, which correlates well with NFA quadrupole moments. This work demonstrates the key impact of NFA quadruple moments and molecular orientation on material energetics and thereby on the efficiency of high-performance OPVs.

Microleakage of different sealing materials in access holes of internal connection implant systems.

STATEMENT OF PROBLEM: Current implant systems cannot completely prevent microleakage from the access holes of screw-retained implant prostheses, which may constitute risks to the clinical success of the implants. PURPOSE: The purpose of this study was to evaluate the levels of microleakage through the access holes of screw-retained implant prostheses sealed with different materials. MATERIAL AND METHODS: An implant with an internal hexagonal configuration was connected to a temporary abutment with an acrylic resin crown. The apical 6.5 mm of the access hole was filled with 1 of the following materials: cotton pellet, silicone sealing material, vinyl polysiloxane, or gutta-percha. The remaining coronal 3 mm was sealed with composite resin. Cyclic loading with 21 N at 1 Hz was applied 16,000 times to the specimens in 0.5% basic fuchsin solution according to the long axis of the tooth. Basic fuchsin dye which penetrated into the internal wall of the abutment through the access hole was dissolved with methyl alcohol. Then the absorbance was measured by a spectrophotometer at 540 nm to evaluate the degree of microleakage. The results were statistically analyzed with 1-way ANOVA and the Tukey HSD test. RESULTS: From greatest to least, the levels of microleakage were in the following order: cotton pellet, silicone sealing material, vinyl polysiloxane, and gutta-percha. The microleakage associated with gutta-percha was not significantly different from that of vinyl polysiloxane. CONCLUSIONS: When sealing the access holes of screw-retained implant prostheses, gutta-percha or vinyl polysiloxane would help reduce microleakage.

FGFRL1 and FGF genes are associated with height, hypertension, and osteoporosis.

Hypertension and osteoporosis are two major disorders, which interact with each other. Specific genetic signals involving the fibroblast growth factor receptor-like 1 (FGFRL1) gene are related to high blood pressure and bone growth in giraffes. FGFRL1 is associated with cardiovascular system and bone formation. We performed an association study to investigate the role of FGFRL1 in hypertension, osteoporosis, and height determination in humans. In addition, we identified three kinds of phenotypes in fibroblast growth factor (FGF) genes and examined their association with the FGFRL1 gene. We identified 42 SNPs in the FGFRL1 gene associated with each trait. We then analyzed the potential functional annotation of each SNP. The FGFRL1 gene was found to be associated with height, hypertension, and osteoporosis, consistent with the results of a previous study. In addition, the FGF2, FGF4, FGF10, FGF18, and FGF22 genes were found to interact with the FGFRL1 gene. Our study suggests that both FGFRL1 and FGFRL1-related genes may determine the height and the prevalence of osteoporosis and hypertension in the Korean population.

Alkyl Chain Engineering of Low Bandgap Non-Fullerene Acceptors for High-Performance Organic Solar Cells: Branched vs. Linear Alkyl Side Chains.

In this work, we report the synthesis and photovoltaic properties of IEBICO-4F, IEHICO-4F, IOICO-4F, and IDICO-4F non-fullerene acceptors (NFAs) bearing different types of alkyl chains (2-ehtylhexyl (EH), 2-ethylbutyl (EB), n-octyl (O), and n-decyl (D), respectively). These NFAs are based on the central indacenodithiophene (IDT) donor core and the same terminal group of 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC-2F), albeit with different side chains appended to the thiophene bridge unit. Although the side chains induced negligible differences between the NFAs in terms of optical band gaps and molecular energy levels, they did lead to changes in their melting points and crystallinity. The NFAs with branched alkyl chains exhibited weaker intermolecular interactions and crystallinity than those with linear alkyl chains. Organic solar cells (OSCs) were fabricated by blending these NFAs with the p-type polymer PTB7-Th. The NFAs with appended branched alkyl chains (IEHICO-4F and IEBICO-4F) possessed superior photovoltaic properties than those with appended linear alkyl chains (IOICO-4F and IDICO-4F). This result can be ascribed mainly to the thin-film morphology. Furthermore, the NFA-based blend films with appended branched alkyl chains exhibited the optimal degree of aggregation and miscibility, whereas the NFA-based blend films with appended linear alkyl chains exhibited higher levels of self-aggregation and lower miscibility between the NFA molecule and the PTB7-Th polymer. We demonstrate that changing the alkyl chain on the π-bridging unit in fused-ring-based NFAs is an effective strategy for improving their photovoltaic performance in bulk heterojunction-type OSCs.

Forensic Analysis of Human Microbiome in Skin and Body Fluids Based on Geographic Location.

High-throughput DNA sequencing technologies have facilitated the in silico forensic analysis of human microbiome. Specific microbial species or communities obtained from the crime scene provide evidence of human contacts and their body fluids. The microbial community is influenced by geographic, ethnic, lifestyle, and environmental factors such as urbanization. An understanding of the effects of these external stressors on the human microbiome and determination of stable and changing elements are important in selecting appropriate targets for investigation. In this study, the Forensic Microbiome Database (FMD) (http://www.fmd.jcvi.org) containing the microbiome data of various locations in the human body in 35 countries was used. We focused on skin, saliva, vaginal fluid, and stool and found that the microbiome distribution differed according to the body part as well as the geographic location. In the case of skin samples, Staphylococcus species were higher than Corynebacterium species among Asians compared with Americans. Holdemanella and Fusobacterium were specific in the saliva of Koreans and Japanese populations. Lactobacillus was found in the vaginal fluids of individuals in all countries, whereas Serratia and Enterobacter were endemic to Bolivia and Congo, respectively. This study is the first attempt to collate and describe the observed variation in microbiomes from the forensic microbiome database. As additional microbiome databases are reported by studies worldwide, the diversity of the applications may exceed and expand beyond the initial identification of the host.