Effect of the solvent quadrupolarizability on the strength of the hydrogen bond: Theory vs data for the Gibbs energy and enthalpy of homo- and heteroassociation between carboxylic acids and water.

A cavity model of the effect of a solvent on thermodynamic parameters of dimerization of polar species in non-polar liquids has been developed and compared to experimental data. Bulk solution data have been collected for stearic acid in cyclohexane and in toluene to quantify the extent of self-association of the acid in terms of the dimer self-dissociation constant, Kd. Composition and temperature-dependent experimental data have been collected to determine Kd, the enthalpy of dissociation, and temperature-dependent infrared molar absorption coefficients. The interaction of stearic acid with small amounts of water present in non-aqueous solvents is also addressed and quantified with a hetero-dissociation (or dehydration) constant, Kh. Existing data for acetic acid are also considered. The model connects Kd and Kh to the vapor-phase association equilibria. Solute dipole-solvent quadrupole interactions are shown to have a major effect on Kd in quadrupolar liquids, such as toluene, benzene, and CS2. This work provides important background as a prelude to adsorption studies of these additives from non-aqueous solvents to solid surfaces with relevance to commercial fluids, such as oil-based corrosion inhibitors and friction modifiers. Moreover, the presented theory of the solvent effect on Kd is a first step to generalization of standard implicit solvent models in computational chemistry (such as the polarizable continuum model) to media of significant quadrupolar strength. This is expected to be particularly important for polar species dissolved in CO2 relevant for carbon capture and storage where appropriate models do not currently exist.

Halogen Bonding in Bicomponent Monolayers: Self-Assembly of a Homologous Series of Iodinated Perfluoroalkanes with Bipyridine.

A homologous series of halogen bonding monolayers based on terminally iodinated perfluoroalkanes and 4,4'-bipyridine have been observed on a graphitic surface and noninvasively probed using powder X-ray diffraction. An excellent agreement is observed between the X-ray structures and density functional theory calculations with dispersion force corrections. Theoretical analysis of the binding energies of the structures indicate that these halogen bonds are strong (25 kJ mol-1), indicating that the layers are highly stable. The monolayer structures are found to be distinct from any plane of the corresponding bulk structures, with limited evidence of partitioning of hydrocarbon and perfluoro tectons. The interchain interactions are found to be slightly stronger than those in related aromatic systems, with important implications for 2D crystal engineering.

Potassium, Calcium, and Magnesium Bridging of AOT to Mica at Constant Ionic Strength.

The bridging effect of a series of common cations between the anionic mica surface and the AOT anion has been studied in a condition of constant ionic strength and surfactant concentration. It was found that sodium ions did not show any bridging effect in this system; however, calcium, magnesium, and potassium all caused adsorption of the organic to the mica surface. The concentrations at which bridging occurred was probed, revealing that only a very low bridging cation concentration was required for binding. The bridged layer stability was also investigated, and the interaction was shown to be a weak one, with the bound layer in equilibrium with the species in the bulk and easily removed. Even maintaining ionic strength and bridging ion concentration was not sufficient to retain the layer when the free organic in solution was removed.

Adsorption of 4-n-Nonylphenol, Carvacrol, and Ethanol onto Iron Oxide from Nonaqueous Hydrocarbon Solvents.

The adsorption of 4-n-nonylphenol (4NP), carvacrol, and ethanol onto the surface of iron oxide from nonaqueous solutions is presented. It is found that adsorption of 4NP from alkanes is strong and proceeds to monolayer formation, where the molecules are essentially "upright". However, at high relative concentrations, ethanol successfully out-competes 4NP for the iron oxide surface. Estimates of the enthalpy and entropy of binding of 4NP were found to be exothermic and entropically disfavored. Sum frequency generation vibrational spectroscopy data indicate some evidence of binding through a phenolate anion, despite the nonpolar, nonaqueous solvent. Carvacrol is also found to adsorb as a monolayer where the molecules are lying "flat". The adsorption of ethanol onto iron oxide from dodecane was investigated through the use of quantitative NMR, which is a convenient analytical technique for measuring adsorption isotherms. It was concluded that ethanol does not form adsorbed monolayers on the surface. Instead, it partitions onto the surface as a surface-enhanced local phase separation related to its poor solubility in alkane solvents.

Self-assembly and adsorption of cetyltrimethylammonium bromide and didodecyldimethylammonium bromide surfactants at the mica-water interface.

The self-assembly and adsorption of the surfactants cetyltrimethylammonium bromide (CTAB) and didodecyldimethylammonium bromide (DDAB) at the muscovite mica-water interface are studied using molecular-dynamics simulations. Adsorption takes place by an ion-exchange mechanism, in which K+ ions are replaced by the organic alkylammonium cations from the solution. Simulations are performed with and without the surface K+ ions, with pure water, and with the surfactants in aqueous solution. CTAB and DDAB form micellar structures in bulk solution, and in the absence of the surface K+ ions, they quickly adsorb and form bilayer structures. The bilayer ordering of CTAB is not perfect, and there is a competition with the formation of cylindrical micelles. DDAB, on the other hand, forms a well-ordered bilayer structure, with the innermost layer showing strong orientational ordering, and the outermost layer being more disordered. The simulations with pure water highlight the molecular ordering and strong electrostatic interactions with the mica-surface atoms. Using simulated scattering length density profiles, the results are compared directly and critically with existing neutron reflectivity measurements. The simulation results are generally consistent with experiments, and yield new insights on the molecular-scale ordering at the mica-water interface.

Characterizing Surfaces of Garnet and Steel, and Adsorption of Organic Additives.

This work reports that abrasive blasting of a structural steel results in significant retention of garnet abrasive residues. A comparative study of the adsorption behavior of a number of organic species, relevant to paint components and additives, onto the surfaces of garnet and S355 steel from nonaqueous solutions is also presented. Areas per adsorbed molecule, estimated from the isotherm data, suggest a range of molecular orientations on the surfaces. Pronounced differences in the adsorption strength to the garnet and steel were observed, particularly that most additives bind more strongly to steel than to garnet. Surface characterization data from acid-base titrations, photoelectron spectroscopy, and backscattered electron diffraction were used to rationalize the adsorption data obtained. The ramifications of these findings for particular industrial processes, with regards the strength of paint adhesion and paint additive formulations, are highlighted.

An X-ray and Neutron Reflectometry Study of Iron Corrosion in Seawater.

The corrosive breakdown of thin iron films supported on silicon substrates under a number of conditions is presented-in particular to understand better how iron, and hence ferritic steel, behaves in a salty water environment. A combination of X-ray and neutron reflectometry was used to monitor the structures of both metal and oxide surface layers and also organic corrosion inhibitors adsorbed at the iron/aqueous interface. A range of behavior in seawater was observed, including complete dissolution and void formation under the metal surface. Importantly, two simple treatments-UV/ozone or soaking in ultrapure water-were found to significantly protect the iron surface for considerable lengths of time, although evidence of pitting corrosion began after around 10 days. The underlying causes of the efficacies of these treatments were further investigated using X-ray photoelectron spectroscopy. In addition, three potential corrosion inhibitors were investigated: (i) dodecyltrimethylammonium bromide (DTAB) demonstrated no ability to protect the surface; (ii) sodium dodecyl sulfate (SDS) appeared to accelerate corrosion; and (iii) bis(2-ethylhexyl)phosphate showed an impressive level of protection (the neutron reflectometry results indicated a thick diffuse layer of surfactant of 23% surface coverage). These findings have been interpreted in terms of preferential inhibitor adsorption at cathodic and anodic surface sites (depending on the nature of the inhibitor).

Synthesis of transparent dispersions of aluminium hydroxide nanoparticles.

Transparent dispersions of inorganic nanoparticles are attractive materials in many fields. However, a facile method for preparing such dispersions of aluminium hydroxide nanoparticles is yet to be realized. Here, we report a direct reactive method to prepare transparent dispersions of pseudo-boehmite nanoparticles (1 wt%) without any surface modification, and with an average particle size of 80 nm in length and 10 nm in width, as well as excellent optical transparency over 94% in the visible range. Furthermore, transparent dispersions of boehmite nanoparticles (1.5 wt%) were also achieved after an additional hydrothermal treatment. However, the optical transparency of dispersions decreased with the rise of hydrothermal temperature and the shape of particles changed from rhombs to hexagons. In particular, monodisperse hexagonal boehmite nanoplates with an average lateral size of 58 nm and a thickness of 12.5 nm were obtained at a hydrothermal temperature of 220 °C. The selectivity of crystal growth direction was speculated as the possible formation mechanism of these as-prepared aluminium hydroxide nanoparticles. Besides, two values of 19.6 wt% and 14.64 wt% were separately measured for the weight loss of pseudo-boehmite and boehmite nanoparticles after a continuous heating, indicating their potential flame-resistant applications in the fabrication of plastic electronics and optical devices with high transparency.

Neutron Reflectometry of an Anionic Surfactant at the Solid-Liquid Interface under Shear.

Neutron reflectometry with in situ rheology is used to measure the shear response of an adsorbed anionic surfactant (sodium bis(2-ethylhexyl) sulfosuccinate, AOT) at the alumina-water interface. A low surfactant concentration is measured where a single bilayer adsorbs at the interface as well as a higher concentration where a multilamellar structure forms. The low concentration structure does not change with the imposed shear (oscillatory or steady). However, the lamellar phase shows a loss of structure under both steady and oscillatory shear. There are differences between the steady and oscillatory cases, which are discussed, with both showing a strong dependence on the strain amplitude.

An Anionic Surfactant on an Anionic Substrate: Monovalent Cation Binding.

Neutron reflectometry has been used to study the adsorption of the anionic surfactant bis(2-ethylhexyl) sulfosuccinate cesium salt on the anionic surface of mica. Evidence of significant adsorption is reported. The adsorption is reversible and changes little with pH. This unexpected adsorption behavior of an anionic molecule on an anionic surface is discussed in terms of recent models for surfactant adsorption such as cation bridging, where adsorption has been reported with the divalent ion calcium but not previously observed with monovalent ions.

Comparative Adsorption of Saturated and Unsaturated Fatty Acids at the Iron Oxide/Oil Interface.

A detailed comparison of the adsorption behavior of long straight chain saturated and unsaturated fatty acids at the iron oxide/oil interface has been considered using a combination of surface study techniques. Both depletion isotherms and polarized neutron reflectometry (PNR) show that the extent of adsorption decreases as the number of double bonds in the alkyl chains increases. Sum frequency generation spectroscopic measurements demonstrate that there is also an increase in chain disorder within the adsorbed layer as the unsaturation increases. However, for the unsaturated analogues, a decrease in peak intensity is seen for the double bond peak upon heating, which is thought to arise from isomerization in the surface-bound layer. The PNR study of oleic acid adsorption indicates chemisorbed monolayer adsorption, with a further diffuse reversible adsorbed layer formed at higher concentrations.

Direct measurements of ionic liquid layering at a single mica-liquid interface and in nano-films between two mica-liquid interfaces.

The layering of ionic liquids close to flat, charged interfaces has been identified previously through theoretical and some experimental measurements. Here we present evidence for oscillations in ion density ('layering') in a long chain ionic liquid (1-decyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide) near the interface with mica using two complementary approaches. Neutron reflection at the ionic liquid-mica interface is used to detect structure at a single interface, and surface force balance (SFB) measurements carried out with the same ionic liquid reveal oscillatory density in the liquid confined between two mica sheets. Our findings imply the interfacial structure is not induced by confinement alone. Structural forces between two mica surfaces extend to approximately twice the distance of the density oscillations measured at a single interface and have similar period in both cases.

Polarized Neutron Reflectometry of Nickel Corrosion Inhibitors.

Polarized neutron reflectometry has been used to investigate the detailed adsorption behavior and corrosion inhibition mechanism of two surfactants on a nickel surface under acidic conditions. Both the corrosion of the nickel surface and the structure of the adsorbed surfactant layer could be monitored in situ by the use of different solvent contrasts. Layer thicknesses and roughnesses were evaluated over a range of pH values, showing distinctly the superior corrosion inhibition of one negatively charged surfactant (sodium dodecyl sulfate) compared to a positively charged example (dodecyl trimethylammonium bromide) due to its stronger binding interaction with the surface. It was found that adequate corrosion inhibition occurs at significantly less than full surface coverage.

Neutron reflection study of the adsorption of the phosphate surfactant NaDEHP onto alumina from water.

The adsorption of a phosphorus analogue of the surfactant AOT, sodium bis(2-ethylhexyl) phosphate (NaDEHP), at the water/alumina interface is described. The material is found to adsorb as an essentially water-free bilayer from neutron reflection measurements. This is similar to the behavior of AOT under comparable conditions, although AOT forms a thicker, more hydrated layer. The NaDEHP shows rather little variation with added salt, but a small thickening of the layer on increasing the pH, in contrast to the behavior of AOT.

Supramolecular self-assembled network formation containing N···Br halogen bonds in physisorbed overlayers.

The formation of a halogen bonded self-assembled co-crystal physisorbed monolayer containing N···Br interactions is reported for the first time. The co-crystal monolayer is identified experimentally by synchrotron X-ray diffraction and the structure determined. Density functional theory (DFT) calculations are also employed to assess the magnitudes of the different interactions in the layer. Significantly, compared to other halogen bonds in physisorbed monolayers we have reported recently, the N···Br bond here is found to be non-linear. It is proposed that the increasing importance of the lateral hydrogen bond interactions, relative to the halogen bond strength, leads to the bending of the halogen bonds.

Combined diffraction and density functional theory calculations of halogen-bonded cocrystal monolayers.

This work describes the combined use of synchrotron X-ray diffraction and density functional theory (DFT) calculations to understand the cocrystal formation or phase separation in 2D monolayers capable of halogen bonding. The solid monolayer structure of 1,4-diiodobenzene (DIB) has been determined by X-ray synchrotron diffraction. The mixing behavior of DIB with 4,4'-bipyridyl (BPY) has also been studied and interestingly is found to phase-separate rather than form a cocrystal, as observed in the bulk. DFT calculations are used to establish the underlying origin of this interesting behavior. The DFT calculations are demonstrated to agree well with the recently proposed monolayer structure for the cocrystal of BPY and 1,4-diiodotetrafluorobenzene (DITFB) (the perfluorinated analogue of DIB), where halogen bonding has also been identified by diffraction. Here we have calculated an estimate of the halogen bond strength by DFT calculations for the DITFB/BPY cocrystal monolayer, which is found to be ∼20 kJ/mol. Computationally, we find that the nonfluorinated DIB and BPY are not expected to form a halogen-bonded cocrystal in a 2D layer; for this pair of species, phase separation of the components is calculated to be lower energy, in good agreement with the diffraction results.

Hexadecylamine adsorption at the iron oxide-oil interface.

The adsorption behavior of a model additive, hexadecylamine, onto an iron surface from hexadecane oil has been characterized using polarized neutron reflectometry, sum-frequency generation spectroscopy, solution depletion isotherm, and X-ray photoelectron spectroscopy (XPS). The amine showed a strong affinity for the metal surface, forming a dense monolayer at relatively low concentrations; a layer thickness of 16 (±3) Å at low concentrations, increasing to 20 (±3) Å at greater amine concentrations, was determined from the neutron data. These thicknesses suggest that the molecules in the layer are tilted. Adsorption was also indicated by sum-frequency generation spectroscopy and XPS, the latter indicating that the most dominant amine-surface interaction was via electron donation from the nitrogen lone pair to the positively charged iron ions. Sum-frequency generation spectroscopy was used to determine the alkyl chain conformation order and orientation on the surface.

Benzylammonium hepta-noate-hepta-noic acid (1/1).

The title salt, C7H10N(+)·C7H13O2(-)·C7H14O2, is an unusual 2:1 stoichiometric combination of two carb-oxy-lic acid mol-ecules and one amine. Although there are crystal structures of a number of 1:1 complexes reported in the literature, 2:1 acid amine complexes are rather uncommon. In this case, a proton is transferred between one acid mol-ecule and the amine to give an acid anion and an ammonium cation whilst the other carb-oxy-lic acid remains protonated. The species inter-act strongly via electrostatic forces and hydrogen bonds. In addition we note that the N atom of the ammonium group makes four close contacts to surrounding O atoms. Three of these are hydrogen bonds with neighbouring acid anions while the fourth does not involve a hydrogen atom but is directed towards the carbonyl O atom of the protonated acid. Each of the acid anion O atoms accepts two hydrogen bonds from adjacent N atoms. There is also evidence of short C-H⋯O contacts. There is disorder (occupancy ratio 0.51:0.49) in the alkyl chain of one of the carb-oxy-lic acid mol-ecules.

Benzyl-ammonium hepta-noate.

The title 1:1 stoichiometric salt, C7H10N(+)·C7H13O2 (-), is formed by proton transfer between hepta-noic acid and benzyl-amine. This combination contrasts to the recently published 2:1 acid-amine adduct of cation, anion and neutral acid molecule from the same components [Wood & Clarke (2013 ▶). Acta Cryst. E69, o346-o347]. There are N-H⋯O hydrogen bonds of moderate strength in the structure [the most important graph-set motifs are R (2) 4(8) and R (4) 4(12)], as well as weak C-H⋯O inter-actions.

(S)-(-)-1-Phenyl-ethanaminium hexa-noate.

A binary mixture of (S)-(-)-1-phenyl-ethanamine and hexa-noic acid was allowed to react to form the title salt, C8H12N(+)·C6H11O2(-). This crystal contains a 1:1 stoichiometric mixture of the acid- and amine-derived species and displays a chiral structure with N-H⋯O hydrogen-bonded chains propagating along the c-axis direction.