Flexible active-site loops fine-tune substrate specificity of hyperthermophilic metallo-oxidases.

Hyperthermophilic ('superheat-loving') archaea found in high-temperature environments such as Pyrobaculum aerophilum contain multicopper oxidases (MCOs) with remarkable efficiency for oxidizing cuprous and ferrous ions. In this work, directed evolution was used to expand the substrate specificity of P. aerophilum McoP for organic substrates. Six rounds of error-prone PCR and DNA shuffling followed by high-throughput screening lead to the identification of a hit variant with a 220-fold increased efficiency (kcat/Km) than the wild-type for 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) without compromising its intrinsic activity for metal ions. The analysis of the X-ray crystal structure reveals four proximal mutations close to the T1Cu active site. One of these mutations is within the 23-residues loop that occludes this site, a distinctive feature of prokaryotic MCOs. The increased flexibility of this loop results in an enlarged tunnel and one additional pocket that facilitates bulky substrate-enzyme interactions. These findings underscore the synergy between mutations that modulate the dynamics of the active-site loop enabling enhanced catalytic function. This study highlights the potential of targeting loops close to the T1Cu for engineering improvements suitable for biotechnological applications.

On the Mediated Electron Transfer of Immobilized Galactose Oxidase for Biotechnological Applications.

Invited for the cover of this issue are Felipe Conzuelo, Wolfgang Schuhmann, and co-workers at the Ruhr University Bochum. The image depicts the electrochemical conversion of glycerol and 5-(hydroxymethyl)furfural with an electrode made up of galactose oxidase electrically wired with a redox polymer. Read the full text of the article at 10.1002/chem.202200868.

On the Mediated Electron Transfer of Immobilized Galactose Oxidase for Biotechnological Applications.

The use of enzymes as catalysts in chemical synthesis offers advantages in terms of clean and highly selective transformations. Galactose oxidase (GalOx) is a remarkable enzyme with several applications in industrial conversions as it catalyzes the oxidation of primary alcohols. We have investigated the wiring of GalOx with a redox polymer; this enables mediated electron transfer with the electrode surface for its potential application in biotechnological conversions. As a result of electrochemical regeneration of the catalytic center, the formation of harmful H2 O2 is minimized during enzymatic catalysis. The introduced bioelectrode was applied to the conversion of bio-renewable platform materials, with glycerol as model substrate. The biocatalytic transformations of glycerol and 5-hydroxymethylfurfural (HMF) were investigated in a circular flow-through setup to assess the possibility of substrate over-oxidation, which is observed for glycerol oxidation but not during HMF conversion.

Closing the Gap for Electronic Short-Circuiting: Photosystem†I Mixed Monolayers Enable Improved Anisotropic Electron Flow in Biophotovoltaic Devices.

Well-defined assemblies of photosynthetic protein complexes are required for an optimal performance of semi-artificial energy conversion devices, capable of providing unidirectional electron flow when light-harvesting proteins are interfaced with electrode surfaces. We present mixed photosystem I (PSI) monolayers constituted of native cyanobacterial PSI trimers in combination with isolated PSI monomers from the same organism. The resulting compact arrangement ensures a high density of photoactive protein complexes per unit area, providing the basis to effectively minimize short-circuiting processes that typically limit the performance of PSI-based bioelectrodes. The PSI film is further interfaced with redox polymers for optimal electron transfer, enabling highly efficient light-induced photocurrent generation. Coupling of the photocathode with a [NiFeSe]-hydrogenase confirms the possibility to realize light-induced H2 evolution.

Redox-Polymer-Based High-Current-Density Gas-Diffusion H2 -Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane-free Biofuel Cell.

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual-gas diffusion electrode H2 /O2 biofuel cell equipped with a [FeFe] hydrogenase/redox polymer-based high-current-density H2 -oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm-2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer-based biofuel cell with outstanding power densities of 5.4 mW cm-2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O2 .

Extended Operational Lifetime of a Photosystem-Based Bioelectrode.

The development of bioelectrochemical assemblies for sustainable energy transformation constitutes an increasingly important field of research. Significant progress has been made in the development of semiartificial devices for conversion of light into electrical energy by integration of photosynthetic biomolecules on electrodes. However, sufficient long-term stability of such biophotoelectrodes has been compromised by reactive species generated under aerobic operation. Therefore, meeting the requirements of practical applications still remains unsolved. We present the operation of a photosystem I-based photocathode using an electron acceptor that enables photocurrent generation under anaerobic conditions as the basis for a biodevice with substantially improved stability. A continuous operation lifetime considerably superior to previous reports and at higher light intensities is paving the way toward the potential application of semiartificial energy conversion devices.

Microscopic Determination of Carrier Density and Mobility in Working Organic Electrochemical Transistors.

A comprehensive understanding of electrochemical and physical phenomena originating the response of electrolyte-gated transistors is crucial for improved handling and design of these devices. However, the lack of suitable tools for direct investigation of microscale effects has hindered the possibility to bridge the gap between experiments and theoretical models. In this contribution, a scanning probe setup is used to explore the operation mechanisms of organic electrochemical transistors by probing the local electrochemical potential of the organic film composing the device channel. Moreover, an interpretative model is developed in order to highlight the meaning of electrochemical doping and to show how the experimental data can give direct access to fundamental device parameters, such as local charge carrier concentration and mobility. This approach is versatile and provides insight into the organic semiconductor/electrolyte interface and useful information for materials characterization, device scaling, and sensing optimization.

The Open Circuit Voltage in Biofuel Cells: Nernstian Shift in Pseudocapacitive Electrodes.

In the development of biofuel cells great effort is dedicated to achieving outstanding figures of merit, such as high stability, maximum power output, and a large open circuit voltage. Biofuel cells with immobilized redox mediators, such as redox polymers with integrated enzymes, show experimentally a substantially higher open circuit voltage than the thermodynamically expected value. Although this phenomenon is widely reported in the literature, there is no comprehensive understanding of the potential shift, the high open circuit voltages have not been discussed in detail, and hence they are only accepted as an inherent property of the investigated systems. We demonstrate that this effect is the result of a Nernstian shift of the electrode potential when catalytic conversion takes place in the absence or at very low current flow. Experimental evidence confirms that the immobilization of redox centers on the electrode surface results in the assembled biofuel cell delivering a higher power output because of charge storage upon catalytic conversion. Our findings have direct implications for the design and evaluation of (bio)fuel cells with pseudocapacitive elements.

High-Resolution Analysis of Photoanodes for Water Splitting by Means of Scanning Photoelectrochemical Microscopy.

In pursuance of efficient tools for the local analysis and characterization of novel photoelectrocatalytic materials, several SECM-based techniques have been developed, aiming on the combined benefit of a local irradiation of the analyzed sample and a microelectrode probe for the localized electrochemical analysis of the surface. We present the development and application of scanning photoelectrochemical microscopy (SPECM) for the laterally resolved characterization of photoelectrocatalytic materials. Particularly, the system was developed for the photoelectrochemical characterization of n-type semiconductor-based photoanodes for water splitting. By using the tip microelectrode simultaneously for local irradiation and as an electrochemical probe, SPECM was capable to simultaneously provide information about the local photocurrent generated at the sample under irradiation and to detect the photoelectrocatalytically evolved oxygen at the microelectrode. In combination with a novel means of irradiation of the interrogated sample, local analysis of semiconductor materials for light-induced water splitting with improved lateral resolution is achieved.

In Operando Investigation of Electrical Coupling of Photosystem 1 and Photosystem 2 by Means of Bipolar Electrochemistry.

Electrochemical communication between two photobioelectrochemical half-cells based on photosystem 1 and photosystem 2 is investigated in operando. The driving force for the electron-transfer reactions is applied in a wireless mode using bipolar electrochemistry with the actual electrode potentials being self-regulated by the redox processes. Four parameters are assessed to understand the overall performance and elucidate the limiting reactions of the photobioelectrochemical cell. In addition to the potential differences for oxidation and reduction reactions, the current flowing between the half-cells as well as in situ collection of locally evolved O2 by photosystem 2 using a positioned scanning electrochemical microscopy tip are evaluated. In this way, changes in the enzymatic performances as a result of inactivation of either of the protein complexes or variations in the external conditions are monitored.

Interrogation of a PS1-Based Photocathode by Means of Scanning Photoelectrochemical Microscopy.

In the development of photosystem-based energy conversion devices, the in-depth understanding of electron transfer processes involved in photocurrent generation and possible charge recombination is essential as a basis for the development of photo-bioelectrochemical architectures with increased efficiency. The evaluation of a bio-photocathode based on photosystem 1 (PS1) integrated within a redox hydrogel by means of scanning photoelectrochemical microscopy (SPECM) is reported. The redox polymer acts as a conducting matrix for the transfer of electrons from the electrode surface to the photo-oxidized P700 centers within PS1, while methyl viologen is used as charge carrier for the collection of electrons at the reduced FB site of PS1. The analysis of the modified surfaces by SPECM enables the evaluation of electron-transfer processes by simultaneously monitoring photocurrent generation at the bio-photoelectrode and the associated generation of reduced charge carriers. The possibility to visualize charge recombination processes is illustrated by using two different electrode materials, namely Au and p-doped Si, exhibiting substantially different electron transfer kinetics for the reoxidation of the methyl viologen radical cation used as freely diffusing charge carrier. In the case of p-doped Si, a slower recombination kinetics allows visualization of methyl viologen radical cation concentration profiles from SPECM approach curves.

A Nernstian Biosupercapacitor.

We propose the very first "Nernstian biosupercapacitor", a biodevice based on only one redox polymer: poly(vinyl imidazole-co-allylamine)[Os(bpy)2 Cl], and two biocatalysts. At the bioanode PQQ-dependent glucose dehydrogenase reduces the Os3+ moieties at the polymer to Os2+ shifting the Nernst potential of the Os3+ /Os2+ redox couple to negative values. Concomitantly, at the biocathode the reduction of O2 by means of bilirubin oxidase embedded in the same redox polymer leads to the oxidation of Os2+ to Os3+ shifting the Nernst potential to higher values. Despite the use of just one redox polymer an open circuit voltage of more than 0.45 V was obtained during charging and the charge is stored in the redox polymer at both the bioanode and the biocathode. By connecting both electrodes via a predefined resistor a high power density is obtained for a short time exceeding the steady state power of a corresponding biofuel cell by a factor of 8.

A redox hydrogel protects the O2 -sensitive [FeFe]-hydrogenase from Chlamydomonas reinhardtii from oxidative damage.

The integration of sensitive catalysts in redox matrices opens up the possibility for their protection from deactivating molecules such as O2 . [FeFe]-hydrogenases are enzymes catalyzing H2 oxidation/production which are irreversibly deactivated by O2 . Therefore, their use under aerobic conditions has never been achieved. Integration of such hydrogenases in viologen-modified hydrogel films allows the enzyme to maintain catalytic current for H2 oxidation in the presence of O2 , demonstrating a protection mechanism independent of reactivation processes. Within the hydrogel, electrons from the hydrogenase-catalyzed H2 oxidation are shuttled to the hydrogel-solution interface for O2 reduction. Hence, the harmful O2 molecules do not reach the hydrogenase. We illustrate the potential applications of this protection concept with a biofuel cell under H2 /O2 mixed feed.

Magnetobiosensors based on viral protein p19 for microRNA determination in cancer cells and tissues.

MicroRNAs (miRs) have emerged as important clinical biomarkers with both diagnostic and prognostic value for relevant diseases, such as cancer. MiRs pose unique challenges for detection and are currently detected by northern blotting, real-time PCR, and microarray techniques. These expensive, complicated, and time-consuming techniques are not feasible for on-site miR determination. In this study, amperometric magnetobiosensors involving RNA-binding viral protein p19 as a selective biorecognition element were developed for miR quantification. The p19-based magnetosensors were able to detect 0.4 fmol of a synthetic target and endogenous miR-21 (selected as a model for its role in a wide variety of cancers) in only 2 h in total RNA extracted from cancer cells and human breast-tumor specimens without PCR amplification and sample preprocessing. These results open up formidable perspectives for the diagnosis and prognosis of human cancers and for drug-discovery programs.

Integrated amperometric affinity biosensors using Co2+-tetradentate nitrilotriacetic acid modified disposable carbon electrodes: application to the determination of ß-lactam antibiotics.

A novel strategy for the construction of disposable amperometric affinity biosensors is described in this work. The approach uses a recombinant bacterial penicillin binding protein (PBP) tagged by an N-terminal hexahistidine tail which was immobilized onto Co(2+)-tetradentate nitrilotriacetic acid (NTA)-modified screen-printed carbon electrodes (SPCEs). The biosensor was employed for the specific detection and quantification of ß-lactam antibiotics residues in milk, which was accomplished by means of a direct competitive assay using a tracer with horseradish peroxidase (HRP) for the enzymatic labeling. The amperometric response measured at -0.20 V versus the Ag pseudoreference electrode of the SPCE upon the addition of H2O2 in the presence of hydroquinone (HQ) as redox mediator was used as the transduction signal. The developed affinity sensor allowed limits of detection to be obtained in the low part-per-billion level for the antibiotics tested in untreated milk samples. Moreover, the biosensor exhibited a good selectivity against other antibiotics residues frequently detected in milk and dairy products. The analysis time was of approximately 30 min.

A biomimetic assembly of folded photosystem I monolayers for an improved light utilization in biophotovoltaic devices.

In the fabrication of photosystem I (PSI)-based biodevices, the use of multilayered architectures aims to maximize the absorption of incident light that can be converted into high-energy electrons. The challenge in this strategy is to overcome the large driving force imposed by the photoinduced potential difference between the two terminal redox centers that are located at opposite sides of PSI, which translates into charge recombination resulting in sub-optimal performance of commonly implemented systems. The integration of PSI monolayers with electrodes using the Langmuir-Blodgett technique enables a preferential anisotropic orientation of PSI in a tightly packed structure, which minimizes short-circuiting processes and aids to improve the performance of PSI-based biodevices. However, the practical application of PSI monolayer-based biodevices is limited due to the small loading of immobilized PSI molecules, leading to overall low utilization of incident light. Inspired by the stacked arrangements of thylakoids in nature, we demonstrate the fabrication of biomimetic structures using multiple PSI monolayers assembled into a folded architecture to improve light absorption and with that the performance of the overall photoelectrode.

A biophotoelectrode based on boronic acid-modified Chlorella vulgaris cells integrated within a redox polymer.

Green microalgae are gaining attention in the renewable energy field due to their ability to convert light into energy in biophotovoltaic (BPV) cells. The poor exogenous electron transfer kinetics of such microorganisms requires the use of redox mediators to improve the performance of related biodevices. Redox polymers are advantageous in the development of subcellular-based BPV devices by providing an improved electron transfer while simultaneously serving as immobilization matrix. However, these surface-confined redox mediators have been rarely used in microorganism-based BPVs. Since electron transfer relies on the proximity between cells and the redox centres at the polymer matrix, the development of molecularly tailored surfaces is of great significance to fabricate more efficient BPV cells. We propose a bioanode integrating Chlorella vulgaris embedded in an Os complex-modified redox polymer. Chlorella vulgaris cells are functionalized with 3-aminophenylboronic acid that exhibits high affinity to saccharides in the cell wall as a basis for an improved integration with the redox polymer. Maximum photocurrents of (5 ± 1) µA cm-2 are achieved. The developed bioanode is further coupled to a bilirubin oxidase-based biocathode for a proof-of-concept BPV cell. The obtained results encourage the optimization of electron-transfer pathways toward the development of advanced microalgae-based biophotovoltaic devices.

Bioelectrocatalytic CO2 Reduction by Redox Polymer-Wired Carbon Monoxide Dehydrogenase Gas Diffusion Electrodes.

The development of electrodes for efficient CO2 reduction while forming valuable compounds is critical. The use of enzymes as catalysts provides the advantage of high catalytic activity in combination with highly selective transformations. We describe the electrical wiring of a carbon monoxide dehydrogenase II from Carboxydothermus hydrogenoformans (ChCODH II) using a cobaltocene-based low-potential redox polymer for the selective reduction of CO2 to CO over gas diffusion electrodes. High catalytic current densities of up to -5.5 mA cm-2 are achieved, exceeding the performance of previously reported bioelectrodes for CO2 reduction based on either carbon monoxide dehydrogenases or formate dehydrogenases. The proposed bioelectrode reveals considerable stability with a half-life of more than 20 h of continuous operation. Product quantification using gas chromatography confirmed the selective transformation of CO2 into CO without any parasitic co-reactions at the applied potentials.

Pyrroloquinoline quinone-dependent glucose dehydrogenase bioelectrodes based on one-step electrochemical entrapment over single-wall carbon nanotubes.

Development of effective direct electron transfer is considered an interesting platform to obtain high performance bioelectrodes. Therefore, designing of scalable and cost-effective immobilization routes that promotes correct direct electrical contacting between the electrode material and the redox enzyme is still required. As we present here, electrochemical entrapment of pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on single-wall carbon nanotube (SWCNT)-modified electrodes was carried out in a single step during electrooxidation of para-aminophenyl phosphonic acid (4-APPA) to obtain active bioelectrodes. The adequate interaction between SWCNTs and the enzyme can be achieved by making use of phosphorus groups introduced during the electrochemical co-deposition of films, improving the electrocatalytic activity towards glucose oxidation. Two different procedures were investigated for electrode fabrication, namely the entrapment of reconstituted holoenzyme (PQQ-GDH) and the entrapment of apoenzyme (apo-GDH) followed by subsequent in situ reconstitution with the redox cofactor PQQ. In both cases, PQQ-GDH preserves its electrocatalytic activity towards glucose oxidation. Moreover, in comparison with a conventional drop-casting method, an important enhancement in sensitivity was obtained for glucose oxidation (981.7 ± 3.5 nA mM-1) using substantially lower amounts of enzyme and cofactor (PQQ). The single step electrochemical entrapment in presence of 4-APPA provides a simple method for the fabrication of enzymatic bioelectrodes.

Light-controlled imaging of biocatalytic reactions via scanning photoelectrochemical microscopy for multiplexed sensing.

A light-controlled multiplexing platform has been developed on the basis of a quantum dot-sensitized inverse opal TiO2 electrode with integrated biocatalytic reactions. Spatially resolved illumination enables multiplexed sensing and imaging of enzymatic oxidation reactions at relatively negative applied potentials.