Microstructures of layered Ni-rich cathodes for lithium-ion batteries.

Millions of electric vehicles (EVs) on the road are powered by lithium-ion batteries (LIBs) based on nickel-rich layered oxide (NRLO) cathodes, and they suffer from a limited driving range and safety concerns. Increasing the Ni content is a key way to boost the energy densities of LIBs and alleviate the EV range anxiety, which are, however, compromised by the rapid performance fading. One unique challenge lies in the worsening of the microstructural stability with a rising Ni-content in the cathode. In this review, we focus on the latest advances in the understanding of NLRO microstructures, particularly the microstructural degradation mechanisms, state-of-the-art stabilization strategies, and advanced characterization methods. We first elaborate on the fundamental mechanisms underlying the microstructural failures of NRLOs, including anisotropic lattice evolution, microcracking, and surface degradation, as a result of which other degradation processes, such as electrolyte decomposition and transition metal dissolution, can be severely aggravated. Afterwards, we discuss representative stabilization strategies, including the surface treatment and construction of radial concentration gradients in polycrystalline secondary particles, the fabrication of rod-shaped primary particles, and the development of single-crystal NRLO cathodes. We then introduce emerging microstructural characterization techniques, especially for identification of the particle orientation, dynamic changes, and elemental distributions in NRLO microstructures. Finally, we provide perspectives on the remaining challenges and opportunities for the development of stable NRLO cathodes for the zero-carbon future.

Controlling the Superconductivity of Nb2PdxS5 via Reversible Li Intercalation.

The Nb2PdxS5 (x ≈ 0.74) superconductor with a Tc of 6.5 K is reduced by the intercalation of lithium in ammonia solution or electrochemically to produce an intercalated phase with expanded lattice parameters. The structure expands by 2% in volume and maintains the C2/m symmetry and rigidity due to the PdS4 units linking the layers. Experimental and computational analysis of the chemically synthesized bulk sample shows that Li occupies triangular prismatic sites between the layers with an occupancy of 0.33(4). This level of intercalation suppresses the superconductivity, with the injection of electrons into the metallic system observed to also reduce the Pauli paramagnetism by ∼40% as the bands are filled to a Fermi level with a lower density of states than in the host material. Deintercalation using iodine partially restores the superconductivity, albeit at a lower Tc of ∼5.5 K and with a smaller volume fraction than in fresh Nb2PdxS5. Electrochemical intercalation reproduces the chemical intercalation product at low Li content (<0.4) and also enables greater reduction, but at higher Li contents (≥0.4) accessed by this route, phase separation occurs with the indication that Li occupies another site.

Synthesis and Characterization of Magnesium Vanadates as Potential Magnesium-Ion Cathode Materials through an Ab†Initio Guided Carbothermal Reduction Approach.

Many technologically relevant materials for advanced energy storage and catalysis feature reduced transition-metal (TM) oxides that are often nontrivial to prepare because of the need to control the reducing nature of the atmosphere in which they are synthesized. Herein, we show that an ab initio predictive synthesis strategy can be used to produce multi-gram-scale products of various MgVx Oy -type phases (δ-MgV2 O5 , spinel MgV2 O4 , and MgVO3 ) containing V3+ or V4+ relevant for Mg-ion battery cathodes. Characterization of these phases using 25 Mg solid-state NMR spectroscopy illustrates the potential of 25 Mg NMR for studying reversible magnesiation and local charge distributions. Rotor-assisted population transfer (RAPT) is used as a much-needed signal-to-noise enhancement technique. The ab initio guided synthesis method is seen as a step forward towards a predictive synthesis strategy for targeting specific complex TM oxides with variable oxidation states of technological importance.

Exploring Cation-Anion Redox Processes in One-Dimensional Linear Chain Vanadium Tetrasulfide Rechargeable Magnesium Ion Cathodes.

For magnesium ion batteries (MIBs) to be used commercially, new cathodes must be developed that show stable reversible Mg intercalation. VS4 is one such promising material, with vanadium and disulfide anions [S2]2- forming one-dimensional linear chains, with a large interchain spacing (5.83 Å) enabling reversible Mg insertion. However, little is known about the details of the redox processes and structural transformations that occur upon Mg intercalation and deintercalation. Here, employing a suite of local structure characterization methods including X-ray photoelectron spectroscopy (XPS), V and S X-ray absorption near-edge spectroscopy (XANES), and 51V Hahn echo and magic-angle turning with phase-adjusted sideband separation (MATPASS) NMR, we show that the reaction proceeds via internal electron transfer from V4+ to [S2]2-, resulting in the simultaneous and coupled oxidation of V4+ to V5+ and reduction of [S2]2- to S2-. We report the formation of a previously unknown intermediate in the Mg-V-S compositional space, Mg3V2S8, comprising [VS4]3- tetrahedral units, identified by using density functional theory coupled with an evolutionary structure-predicting algorithm. The structure is verified experimentally via X-ray pair distribution function analysis. The voltage associated with the competing conversion reaction to form MgS plus V metal directly is similar to that of intermediate formation, resulting in two competing reaction pathways. Partial reversibility is seen to re-form the V5+ and S2- containing intermediate on charging instead of VS4. This work showcases the possibility of developing a family of transition metal polychalcogenides functioning via coupled cationic-anionic redox processes as a potential way of achieving higher capacities for MIBs.

Solar thermochemical splitting of water to generate hydrogen.

Solar photochemical means of splitting water (artificial photosynthesis) to generate hydrogen is emerging as a viable process. The solar thermochemical route also promises to be an attractive means of achieving this objective. In this paper we present different types of thermochemical cycles that one can use for the purpose. These include the low-temperature multistep process as well as the high-temperature two-step process. It is noteworthy that the multistep process based on the Mn(II)/Mn(III) oxide system can be carried out at 700 °C or 750 °C. The two-step process has been achieved at 1,300 °C/900 °C by using yttrium-based rare earth manganites. It seems possible to render this high-temperature process as an isothermal process. Thermodynamics and kinetics of H2O splitting are largely controlled by the inherent redox properties of the materials. Interestingly, under the conditions of H2O splitting in the high-temperature process CO2 can also be decomposed to CO, providing a feasible method for generating the industrially important syngas (CO+H2). Although carbonate formation can be addressed as a hurdle during CO2 splitting, the problem can be avoided by a suitable choice of experimental conditions. The choice of the solar reactor holds the key for the commercialization of thermochemical fuel production.

Ln0.5 A0.5 MnO3 (Ln=Lanthanide, A= Ca, Sr) Perovskites Exhibiting Remarkable Performance in the Thermochemical Generation of CO and H2 from CO2 and H2 O.

Perovskite oxides of the Ln0.5 A0.5 MnO3 (Ln=lanthanide, A=Sr, Ca) family have been investigated for the thermochemical splitting of H2 O and CO2 to produce H2 and CO respectively. The amounts of O2 and CO produced strongly depend on the size of the rare earth ions and alkaline earth ions. The manganite with the smallest rare earth possessing the highest distortion and size disorder as well as the smallest tolerance factor, gives out the maximum amount of O2 , and, hence, the maximum amount of CO. Thus, the best results are found with Y0.5 Sr0.5 MnO3 , which possesses the highest distortion and size disorder. Y0.5 Sr0.5 MnO3 shows remarkable fuel production activity even at the reduction and oxidation temperatures as low as 1200 °C and 900 °C, respectively.

Noteworthy performance of La(1-x)Ca(x)MnO3 perovskites in generating H2 and CO by the thermochemical splitting of H2O and CO2.

Perovskite oxides of the composition La1-xCaxMnO3 (LCM) have been investigated for the thermochemical splitting of H2O and CO2 to produce H2 and CO, respectively. The study was carried out in comparison with La1-xSrxMnO3, CeO2 and other oxides. The LCM system exhibits superior characteristics in high-temperature evolution of oxygen, and in reducing CO2 to CO and H2O to H2. The best results were obtained with La0.5Ca0.5MnO3 whose performance is noteworthy compared to that of other oxides including ceria. The orthorhombic structure of LCM seems to be a crucial factor.

Sr2MnO2Na1.6Se2: A Metamagnetic Layered Oxychalcogenide Synthesized by Reductive Na Intercalation to Break [Se2]2- Perselenide Dimer Units.

Recent advances in anion-redox topochemistry have enabled the synthesis of metastable mixed-anion solids. Synthesis of the new transition metal oxychalcogenide Sr2MnO2Na1.6Se2 by topochemical Na intercalation into Sr2MnO2Se2 is reported here. Na intercalation is enabled by the redox activity of [Se2]2- perselenide dimers, where the Se-Se bonds are cleaved and a [Na2-x Se2](2+x)- antifluorite layer is formed. Freshly prepared samples have 16(1) % Na-site vacancies corresponding to a formal oxidation state of Mn of +2.32, a mixed-valence between Mn2+ (d5) and Mn3+ (d4). Samples are highly prone to deintercalation of Na, and over two years, even in an argon glovebox environment, the Na content decreased by 4(1) %, leading to slight oxidation of Mn and a significantly increased long-range ordered moment on the Mn site as measured using neutron powder diffraction. The magnetic structure derived from neutron powder diffraction at 5 K reveals that the compound orders magnetically with ferromagnetic MnO2 sheets coupled antiferromagnetically. The aged sample shows a metamagnetic transition from bulk antiferromagnetic to ferromagnetic behavior in an applied magnetic field of 2 T, in contrast to the Cu analogue, Sr2MnO2Cu1.55Se2, where there is only a hint that such a transition may occur at fields exceeding 7 T. This is presumably due to the higher ionic character of [Na2-x Se2](2+x)- layers compared to [Cu2-x Se2](2+x)- layers, reducing the strength of the antiferromagnetic interactions between MnO2 sheets. Electrochemical Na intercalation into Sr2MnO2Se2 leads to the formation of multiphase sodiated products. The work shows the potential of anion redox to yield novel compounds with intriguing physical properties.

Anion redox as a means to derive layered manganese oxychalcogenides with exotic intergrowth structures.

Topochemistry enables step-by-step conversions of solid-state materials often leading to metastable structures that retain initial structural motifs. Recent advances in this field revealed many examples where relatively bulky anionic constituents were actively involved in redox reactions during (de)intercalation processes. Such reactions are often accompanied by anion-anion bond formation, which heralds possibilities to design novel structure types disparate from known precursors, in a controlled manner. Here we present the multistep conversion of layered oxychalcogenides Sr2MnO2Cu1.5Ch2 (Ch = S, Se) into Cu-deintercalated phases where antifluorite type [Cu1.5Ch2]2.5- slabs collapsed into two-dimensional arrays of chalcogen dimers. The collapse of the chalcogenide layers on deintercalation led to various stacking types of Sr2MnO2Ch2 slabs, which formed polychalcogenide structures unattainable by conventional high-temperature syntheses. Anion-redox topochemistry is demonstrated to be of interest not only for electrochemical applications but also as a means to design complex layered architectures.

Structural Evolution of Layered Manganese Oxysulfides during Reversible Electrochemical Lithium Insertion and Copper Extrusion.

The electrochemical lithiation and delithiation of the layered oxysulfide Sr2MnO2Cu4-δS3 has been investigated by using a combination of in situ powder X-ray diffraction and ex situ neutron powder diffraction, X-ray absorption and 7Li NMR spectroscopy, together with a range of electrochemical experiments. Sr2MnO2Cu4-δS3 consists of [Sr2MnO2] perovskite-type cationic layers alternating with highly defective antifluorite-type [Cu4-δS3] (δ ≈ 0.5) anionic layers. It undergoes a combined displacement/intercalation (CDI) mechanism on reaction with Li, where the inserted Li replaces Cu, forming Li4S3 slabs and Cu+ is reduced and extruded as metallic particles. For the initial 2-3% of the first discharge process, the vacant sites in the sulfide layer are filled by Li; Cu extrusion then accompanies further insertion of Li. Mn2.5+ is reduced to Mn2+ during the first half of the discharge. The overall charging process involves the removal of Li and re-insertion of Cu into the sulfide layers with re-oxidation of Mn2+ to Mn2.5+. However, due to the different diffusivities of Li and Cu, the processes operating on charge are quite different from those operating during the first discharge: charging to 2.75 V results in the removal of most of the Li, little reinsertion of Cu, and good capacity retention. A charge to 3.75 V is required to fully reinsert Cu, which results in significant changes to the sulfide sublattice during the following discharge and poor capacity retention. This detailed structure-property investigation will promote the design of new functional electrodes with improved device performance.

Toward an Understanding of SEI Formation and Lithium Plating on Copper in Anode-Free Batteries.

"Anode-free" batteries present a significant advantage due to their substantially higher energy density and ease of assembly in a dry air atmosphere. However, issues involving lithium dendrite growth and low cycling Coulombic efficiencies during operation remain to be solved. Solid electrolyte interphase (SEI) formation on Cu and its effect on Li plating are studied here to understand the interplay between the Cu current collector surface chemistry and plated Li morphology. A native interphase layer (N-SEI) on the Cu current collector was observed with solid-state nuclear magnetic resonance spectroscopy (ssNMR) and electrochemical impedance spectroscopy (EIS). Cyclic voltammetry (CV) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) studies showed that the nature of the N-SEI is affected by the copper interface composition. An X-ray photoelectron spectroscopy (XPS) study identified a relationship between the applied voltage and SEI composition. In addition to the typical SEI components, the SEI contains copper oxides (Cu x O) and their reduction reaction products. Parasitic electrochemical reactions were observed via in situ NMR measurements of Li plating efficiency. Scanning electron microscopy (SEM) studies revealed a correlation between the morphology of the plated Li and the SEI homogeneity, current density, and rest time in the electrolyte before plating. Via ToF-SIMS, we found that the preferential plating of Li on Cu is governed by the distribution of ionically conducting rather than electronic conducting compounds. The results together suggest strategies for mitigating dendrite formation by current collector pretreatment and controlled SEI formation during the first battery charge.

Effects of Atmospheric Gases on Li Metal Cyclability and Solid-Electrolyte Interphase Formation.

For Li-air batteries, dissolved gas can cross over from the air electrode to the Li metal anode and affect the solid-electrolyte interphase (SEI) formation, a phenomenon that has not been fully characterized. In this work, the impact of atmospheric gases on the SEI properties is studied using electrochemical methods and ex situ characterization techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The presence of O2 significantly improved the lithium cyclability; less lithium is consumed to form the SEI or is lost because of electrical disconnects. However, the SEI resistivity and plating overpotentials increased. Lithium cycled in an "air-like" mixed O2/N2 environment also demonstrated improved cycling efficiency, suggesting that dissolved O2 participates in electrolyte reduction, forming a homogeneous SEI, even at low concentrations. The impact of gas environments on Li metal plating and SEI formation represents an additional parameter in designing future Li-metal batteries.

Beneficial effects of substituting trivalent ions in the B-site of La0.5Sr0.5Mn1-xAxO3 (A = Al, Ga, Sc) on the thermochemical generation of CO and H2 from CO2 and H2O.

The effect of substitution of Al(3+), Ga(3+) and Sc(3+) ions in the Mn(3+) site of La0.5Sr0.5MnO3 on the thermochemical splitting of CO2 to generate CO has been studied in detail. Both La0.5Sr0.5Mn1-xGaxO3 and La0.5Sr0.5Mn1-xScxO3 give high yields of O2 and generate CO more efficiently than La0.5Sr0.5Mn1-xAlxO3 or the parent La0.5Sr0.5MnO3. Substitution of even 5% Sc(3+) (x = 0.05) results in a remarkable improvement in performance. Thus La0.5Sr0.5Mn0.95Sc0.05O3 produces 417 µmol g(-1) of O2 and 545 µmol g(-1) of CO, respectively, i.e. 2 and 1.7 times more O2 and CO than La0.5Sr0.5MnO3. This manganite also generates H2 satisfactorily by the thermochemical splitting of H2O.

Solar photochemical and thermochemical splitting of water.

Artificial photosynthesis to carry out both the oxidation and the reduction of water has emerged to be an exciting area of research. It has been possible to photochemically generate oxygen by using a scheme similar to the Z-scheme, by using suitable catalysts in place of water-oxidation catalyst in the Z-scheme in natural photosynthesis. The best oxidation catalysts are found to be Co and Mn oxides with the e(1) g configuration. The more important aspects investigated pertain to the visible-light-induced generation of hydrogen by using semiconductor heterostructures of the type ZnO/Pt/Cd1-xZnxS and dye-sensitized semiconductors. In the case of heterostructures, good yields of H2 have been obtained. Modifications of the heterostructures, wherein Pt is replaced by NiO, and the oxide is substituted with different anions are discussed. MoS2 and MoSe2 in the 1T form yield high quantities of H2 when sensitized by Eosin Y. Two-step thermochemical splitting of H2O using metal oxide redox pairs provides a strategy to produce H2 and CO. Performance of the Ln0.5A0.5MnO3 (Ln = rare earth ion, A = Ca, Sr) family of perovskites is found to be promising in this context. The best results to date are found with Y0.5Sr0.5MnO3.

Synthesis and antibacterial and antifungal evaluation of some chalcone based sulfones and bisulfones.

Two series of chalcone based sulfone and bisulfone derivatives were synthesized using chalcone, thiophenol and sodium metal at room temperature, followed by oxidation of chalcone sulfides with m-CPBA at 0 °C in a novel method. Both sulfones and bisulfones were evaluated for their antimicrobial activities against Aspergillus niger and Candida albicans (yeast), Bacillus subtilis and Staphylococcus aureus (Gram (+) bacteria) and Pseudomonas aeruginosa and Salmonella typhimurium (Gram (-) bacteria) strains. Among them, compounds 2c, 3c, 6c, 7c, 8c and 9c have shown high antifungal activity against C. albicans compare to reference drugs viz. Amphotericin-B and Nystatin. Compound 1c has shown slightly better antibacterial activity against B. subtilis and compounds 5c, 6c and 7c have shown excellent antibacterial activity against S. typhimurium in compare to reference drugs Ampicillin and Kanamycin.