Nanocelluloses: a new family of nature-based materials.

Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

Stabilization of neodymium oxide nanoparticles via soft adsorption of charged polymers.

In this work, two synthetic polyelectrolytes, PSS and PAH, are employed as strong adsorbed surfactants to disperse and stabilize neodymium oxide nanoparticles. The acid-base equilibria of the oxide surfaces of the particles were investigated under different pH conditions in the absence and presence of polyelectrolytes, to optimize particle stabilization through enhancement of the effective repulsive surface charges. Surface charge amplification of a 3:5 ratio was achieved to permit improved particle transparency of 100-fold in visible wavelengths in neutral and acidic pH regimes, and a stable 10-fold surface charge amplification was achieved under basic pH conditions. The potential of polyelectrolytes as stabilizing agents for neodymium oxide NPs in large-scale particle physics experiments requiring extremely high optical transparency over long path length is evaluated based on optical absorbance and particle stability.

Preparation and characterization of polyelectrolyte-coated gold nanoparticles.

Gold nanoparticles of 5 nm diameter, stabilized by 4-(dimethylamino)pyridine (DMAP), were coated with poly(sodium 4-styrene sulfonate) (PSS) via electrostatic self-assembly. The suspension stability, monitored by the gold surface plasmon band (SPB), was studied by varying the pH, the PSS chain length, and PSS concentration. Enhanced stability is obtained at pH 10 (above the pKa of DMAP) when the polymer chain length matches or exceeds the particle circumference. Solid state 13C NMR was used to determine the presence of DMAP and polymers after subsequent deposition of weak and strong polycations: poly(allylamine hydrochloride) (PAH) and poly(diallyldimethylammonium chloride) (PDADMAC). At pH 10, DMAP remains associated with the nanoparticle after the first PSS layer has been formed. When PAH or PDADMAC are subsequently added at pH 4.5, DMAP is expelled, the suspensions remain stable, and zeta potential values indicate complete charge reversal. In the case of PDADMAC, however, the first layer of PSS is not fully retained. When PDADMAC is added at pH 10, DMAP and the first PSS layer are retained but lower zeta potentials and a higher SPB shift indicate a degraded stability. For PAH addition at pH 9.5, both DMAP and PSS are expelled and the suspension becomes unstable. These differences in stability of the multilayer components and the nanoparticle suspension are rationalized in terms of chain flexibility, polymer charge density, and the ability of the polymer functional groups to directly interact with the gold surface.