Study on the active components and mechanism of Atractylodis Macrocephalae Rhizoma for invigorating the spleen and tonifying qi based on spectrum-effect relationship and network pharmacology.

Spleen deficiency can lead to various abnormal physiological functions of the spleen. Atractylodis Macrocephalae Rhizoma (AMR) is a traditional Chinese medicine used to invigorate the spleen and tonify qi. The study aimed to identify the primary active components influencing the efficacy of AMR in strengthening the spleen and replenishing qi through spectrum-effect relationship and chemometrics. Network pharmacology was used to investigate the mechanism by which AMR strengthens the spleen and replenishes qi, with molecular docking utilized for validation purposes. The findings indicated that bran-fried AMR exhibited superior efficacy, with atractylenolides and atractylone identified as the primary active constituents. Atractylenolide II emerged as the most influential component impacting the effectiveness of AMR, while the key target was androgen receptor. Furthermore, crucial pathways implicated included the mitogen-activated protein cascade (MAPK) cascade, RNA polymerase II transcription factor activity, ligand-activated sequence-specific DNA binding, and RNA polymerase II sequence-specific DNA-binding transcription factor binding. In summary, our study has identified the primary active components associated with the efficacy of AMR and has provided an initial exploration of its mechanism of action. This offers a theoretical foundation for future investigations into the material basis and molecular mechanisms underlying the pharmacodynamics of AMR.

[Material basis of kidney Yang deficiency rats before and after salt processing of Dipsacus asper based on spectrum-effect relationship].

This paper aims to study the spectrum-effect relationship between the fingerprints before and after salt processing of Dipsacus asper and the efficacy of warming and tonifying kidney Yang and find the main active components against kidney Yang deficiency before and after salt processing of D. asper, so as to provide the basis for clarifying the effect of salt processing on kidney Yang deficiency. The HPLC fingerprint before and after salt processing of D. asper was established by the HPLC-DAD. 15 common peaks were obtained, and 11 components were identified. The content changes of various components in rat serum were detected, and the difference in efficacy before and after salt processing was compared. The results of pharmacological experiments showed that salt processing of D. asper could enhance the kidney index. At the same dose, there was a significant difference between the raw D. asper and D. asper after salt processing groups. Compared with the model group, the contents of ACTH, cAMP, CORT, E_2, GH, Na~+-K~+-ATPase, T, and T4 in the serum of rats in the administration group increased to a certain extent, and the contents of cGMP and TNF-α decreased to a certain extent. Among them, there were significant differences in the above indexes in the serum of rats in the high-dose group of raw D. asper, middle-dose group of D. asper after salt processing, high-dose group of D. asper after salt processing, and the positive drug group. The overall results showed that D. asper after salt processing was more effective than raw D. asper in preventing kidney yang deficiency. The efficacy of D. asper was evaluated by grey correlation analysis, entropy method, and Pearson correlation analysis, and the components of D. asper after salt processing against kidney yang deficiency were screened out. According to the results of correlation degree ranking, the components with increased ranking before and after salt processing of D. asper were loganin, chlorogenic acid, dipsacoside A, asperosaponin Ⅵ, caffeic acid, and isochlorogenic acid B. It was preliminarily speculated that these compounds may be the potential pharmacodynamic components for the treatment of kidney yang deficiency before and after salt processing of D. asper. The changing components before and after the salt processing of D. asper were determined, which proved that D. asper after salt processing was superior to D. asper in the treatment of kidney yang deficiency. The spectrum-effect relationship between the efficacy of D. asper before and after salt processing and the treatment of kidney yang deficiency was established, which laid a foundation for the subsequent study on the pharmacodynamic components and molecular mechanism of salt processing of D. asper.

Bio-inspired surface aberration mitigation technique for high-frequency conversion efficiency of large-aperture nonlinear optics.

Low-frequency conversion efficiency severely limits the 3ω ultraviolet energy density at the target of inertial confinement fusion facilities. Here, we present a bio-inspired surface aberration mitigation (SAM) technique that could significantly reduce the crystal surface aberration and realize high frequency conversion efficiency over a clear aperture of 400 mm × 400 mm. Numerical models are utilized to optimize and verify the mechanical properties and physical performance of the SAM technique. In addition, the influences of various operation conditions on surface aberration, angle-detuning magnitude, and frequency conversion efficiency are illustrated. Finally, the process stability and online feasibility of this new approach are validated by the established offline characterization system and in situ imaging system.

Simultaneous determination of glycol ethers and their acetates in cosmetics by gas chromatography with mass spectrometry.

A gas chromatography with mass spectrometry method was developed for the simultaneous determination of ten kinds of glycol ethers and their acetates in cosmetics. The samples were extracted with methanol/ethyl acetate (80:20, v/v), further treated with vortex and ultrasound, and analyzed by gas chromatography with mass spectrometry. The concentration of each analyte was calibrated by the external standard method. Under the optimal conditions, the analytes showed linear relationship in the range of 0.05-25 mg/L with determination coefficients larger than 0.9987. The limits of detection and quantification were in the range of 0.09-0.59 and 0.31-1.95 mg/kg, respectively. The average recoveries of three spiked levels were 80.2-105.4% with intra- and interday precisions of 1.1-6.3 and 1.9-6.5%, respectively. Method validation from different labs confirmed the satisfactory recoveries and precisions. This method shows advantages of simple, high sensitivity, and high recovery, which can be applied to the detection of glycol ethers and acetates in cosmetics.

Quantitative determination, principal component analysis and discriminant analysis of eight marker compounds in crude and sweated Dipsaci Radix by HPLC-DAD.

CONTEXT: Dipsaci Radix is derived from the dry root of Dipsacus asper Wall.ex Henry (Dipsacaceae). It has attracted increasing attention as one of the most popular and precious herbal medicines in clinical use. OBJECTIVE: To develop a HPLC-DAD method for quantitative analysis and quality control of eight active components in crude and sweated Dipsaci Radix. MATERIALS AND METHODS: The eight components in Dipsaci Radix were analyzed by HPLC-DAD on an Agilent Eclipse XDB-C18 column within a gradient elution of acetonitrile and 0.05% formic acid aqueous solution. ESI-MS spectra were acquired on a triple quadrupole mass spectrometer. Validation was performed in order to demonstrate linearity, precision, repeatability, stability, and accuracy of the method. The results were processed with principal component analysis (PCA) and discriminant analysis (DA). RESULTS: The eight components showed good linearity (R2 > 0.9991) in the ranges of 60.40-1208.00, 151.00-3020.00, 3.06-61.20, 30.76-615.20, 5.13-102.60, 10.17-203.40, 10.20-204.00, and 151.60-3032.00 mg/mL, respectively. The overall recoveries were in the range of 99.03-102.38%, with RSDs ranging from 1.89% to 4.05%. Through PCA, the degree of importance of the eight components in sequence was CA > AVI > IA > LA > LN > IC > IB > CaA. The crude and sweated Dipsaci Radix were distinguished obviously by DA. DISCUSSION AND CONCLUSION: The method, using HPLC-DAD analysis in combination with PCA and DA, could provide a more comprehensive and quantitative chemical pattern recognition and quality evaluation to crude and sweated Dipsaci Radix.

[Analysis of different forms Linderae Radix based on HPLC and NIRS fingerprints].

Three different forms of Linderae Radix were evaluated by HPLC combined with NIRS fingerprint. The Linderae Radix was divided into three forms, including spindle root, straight root and old root. The HPLC fingerprints were developed, and then cluster analysis was performed using the SPSS software. The near-infrared spectra of Linderae Radix was collected, and then established the discriminant analysis model. The similarity values of the spindle root and straight root all were above 0.990, while the similarity value of the old root was less than 0.850. Two forms of Linderae Radix were obviously divided into three parts by the NIRS model and Cluster analysis. The results of HPLC and FT-NIR analysis showed the quality of Linderae Radix old root was different from the spindle root and straight root. The combined use of the two methods could identify different forms of Linderae Radix quickly and accurately.

[Rapid identification of crude and sweated dipsaci radix based on near-infrared spectroscopy combined with principal component analysis-mahalanobis distance].

In order to discriminate the crude and sweated Dipsaci Radix correctly and rapidly, the crude and sweated Dipsaci Radix were scanned by the NIR spectrometer, and an identifying model was developed by near infrared spectroscopy combined with principal component-Mahalanobis distance pattern recognition method. The pretreated spectra data of 129 crude samples and 86 sweated ones were analyzed through principal component analysis (PCA). The identifying model was developed by choosing the spectrum for 9 881.46-4 119.20 cm(-1) and "SNV + spectrum + S-G" to the original spectral preprocessing with 14 principal components, and then was verified by prediction set, identifying with 100% accuracy. The rapid identification model of the crude and sweated Dipsaci Radix by NIR is feasible and efficient, and could be used as an assistant means for identifying the crude and sweated Dipsaci Radix.

[Rapid Identification of Fresh-cut and Sulphur Fumigation Processed Fritillaria thunbergii Bulb Slices Based on Near-infrared Spectroscopy].

OBJECTIVE: A rapid identification model of the fresh-cut and sulphur fumigation processed Fritillaria thunbergii bulb slices was developed by near-infrared spectroscopy (NIR) with chemometrics method. METHODS: 186 batches of Fritillaria thunbergii bulb slices were collected from the two main producing areas Ningbo and Pan'an in Zhejiang Province, and the near-infrared spectrums were gathered to establish the qualitative identification model by discriminant analysis. RESULTS: The identification model was developed by choosing the spectrum of 9,881.46-4,119.20 cm(-1) and "MSC + spectrum + Ns" to the original spectral preprocessing, and then was verified by prediction set, with 100% identify accuracy. CONCLUSION: The rapid identification model of the fresh-cut and sulphur fumigation processed Fritillaria thunbergii bulb slices by NIR is feasible and efficient.

Global trends and frontiers of research on Kümmell's disease: A bibliometric analysis.

The prevalence of Kümmell's disease (KD) has been increasing due to the aging population and the rise of osteoporotic vertebral compressibility fractures. As a result, there has been a growing concern about this condition. Despite the rapid advancements in its related research fields, the current research status and hotspot analysis of KD remain unclear. Therefore, our goal was to identify and analyze the global research trends on KD using bibliometric tools. All KD data were obtained from the Web of Science Core Collection. The information of research field was collected, including title, author, institutions, journals, countries, references, total citations, and years of publication for further analysis. From 1900 to 2022, a total of 195 articles and 1973 references have been published in this field, originating from 27 countries/regions and 90 journals, with China leading the contributions. The most significant institutional and author contributions come from Soochow University and Kim, HS, respectively. The journal with the highest number of published research and total citation frequency is Spine. The latest research focuses in this field include "risk factor," "osteoporotic vertebral compression fracture," "pedicle screw fixation," "percutaneous vertebroplasty," and "bone cement," and should be closely monitored. Additionally, we have conducted a comprehensive analysis of the 50 most-cited articles in KD, providing a valuable list of articles to guide clinical decision-making and future research for clinicians and researchers. In recent years, there has been a significant increase in scientific research on KD. Future research in KD is likely to focus on surgical treatment, risk factors, and complications.

Transcription factors LvBBX24 and LvbZIP44 coordinated anthocyanin accumulation in response to light in lily petals.

Lily (Lilium spp.), a horticultural crop serving both ornamental and edible functions, derives its coloration primarily from anthocyanins. However, limited studies have been conducted on the accumulation of anthocyanins within lilies. In this study, we cloned a light-induced transcription factor named as LvBBX24 in lilies. Through genetic and biochemical analysis, we determined that LvBBX24 could upregulate the transcription of LvMYB5 and facilitate anthocyanin synthesis. Moreover, we identified that darkness promoted the degradation of LvBBX24 protein. Through screening a yeast library, we identified LvbZIP44 acts as its interacting partner. Genetic testing confirmed that LvbZIP44 also plays a role in promoting lily anthocyanin synthesis. This indicates a potential synergistic regulatory effect between LvBBX24 and LvbZIP44. Our study indicates that LvBBX24 and LvbZIP44 cooperate to regulate anthocyanin accumulation in lily petals. These findings provide compelling evidence supporting the idea that LvBBX24 and LvbZIP44 may form a looped helix surrounding the LvMYB5 promoter region to regulate anthocyanin biosynthesis.

Study on quality control methods and pharmacodynamic material basis of different specifications of Corydalis Rhizoma produced in Zhejiang Province.

ETHNOPHARMACOLOGICAL RELEVANCE: The quality control methods of different specifications of Corydalis Rhizoma in Zhejiang China (ZJ CR) are the same, so the quality of each specification couldnot be guaranteed. To clarify the quality control methods and pharmacodynamic material basis of ZJ CR with different specifications could provide reference for the quality control of ZJ CR. AIM OF THE STUDY: The purpose of this study was to establish a quality control method for ZJ CR with different specifications and to screen out the pharmacodynamic material basis of ZJ CR with different specifications. MATERIALS AND METHODS: Firstly, according to the existing grading standards, the medicinal materials were divided into specifications, and the character indexes of ZJ CR with different specifications were established. The quality indexes were established by HPLC, network pharmacology and literature retrieval. The correlation between the trait indexes and quality indexes of ZJ CR with different specifications was analyzed, and the best quality control method was established. Further combined with the pharmacodynamic indexes of ZJ CR with different specifications, the pharmacodynamic material basis of ZJ CR with different specifications was screened out by spectrum-effect analysis. The correlation between trait indexes and pharmacodynamic indexes was analyzed to verify the rationality of grade standard. RESULTS: The three specifications of ZJ CR were CR (Diameter ≥1.1 cm), CR (Diameter <1.1 cm), and CR (No size distinction). Diameter, width, thickness, grain weight, volume and 50 g grain number could be used as the trait indexes of ZJ CR. Protopine (CR1), palmatine hydrochloride (CR2), berberine hydrochloride (CR3), dehydrocorydaline (CR4), tetrahydropalmatine (CR5), tetrahydroberberine (CR6), corydaline (CR7), stylopine (CR8) and isoimperatorin (CR9) were identified. Total components, core components (CR5, CR6, CR7 and CR8), alcohol-soluble extracts (ASE) could be used as quality indexes. The best quality control methods of the three specifications respectively were: the larger the diameter and grain weight, the smaller the number of 50 g grains; The larger the diameter, the smaller the volume, thickness, width and number of 50 g particles; The larger the grain weight and volume, the smaller the number of 50 g grains. The main analgesic components of the three specifications respectively were: CR1, CR2 and core components; CR2, CR4; CR8, CR9. The larger the diameter and the less the number of 50 g grains, the better the analgesic effect of ZJ CR, and the grade standard was reasonable. CONCLUSIONS: This study showed that the quality control methods and pharmacodynamic material basis of ZJ CR with different specifications were different, which may be caused by the differences in traits and the contribution of main active ingredients. This study constructed an evaluation model combining external traits, internal quality and overall efficacy, and provided theoretical support for the rationality of ZJ CR grade standard.

Study on the quality of Corydalis Rhizoma in Zhejiang based on multidimensional evaluation method.

ETHNOPHARMACOLOGICAL RELEVANCE: The quality requirements of Corydalis Rhizoma (CR) in different producing areas are uniform, resulting in uneven efficacy. As a genuine producing area, the effective quality control of CR in Zhejiang Province (ZJ) could provide a theoretical basis for the rational application of medicinal materials. AIM OF THE STUDY: The purpose of this study was to effectively distinguish the CR inside and outside ZJ, and provided a theoretical basis for the quality control and material basis research of ZJ CR. MATERIALS AND METHODS: The core components of ZJ CR could be identified by HPLC combined with chemometrics screening, and the quality of CR from different producing areas was evaluated by a genetic algorithm-back propagation (GA-BP) neural network. Chromaticity and near-infrared (NIR) spectroscopy were used to identify CR inside and outside ZJ, and rapid content prediction was realized. The analgesic effect of CR in different regions was compared by a zebrafish analgesic experiment. Analgesic experiments in rats and analysis of the research status of quality components were used to screen the quality control components of ZJ CR. RESULTS: The contents of palmatine hydrochloride (YSBMT), dehydrocorydaline (TQZJJ), tetrahydropalmatine (YHSYS), tetrahydroberberine (SQXBJ), corydaline (YHSJS), stylopine (SQHLJ), and isoimperatorin (YOQHS) in ZJ CR were higher than those in CR from outside ZJ, but the content of protopine (YAPJ) and berberine hydrochloride (YSXBJ) was lower than that in CR from outside ZJ. YHSJS and SQHLJ could be used as the core components to identify ZJ CR. The GA-BP neural network showed that the relative importance of ZJ CR was the strongest. Chroma-content correlation analysis and the NIR qualitative model could effectively distinguish CR from inside and outside of ZJ, and the NIR quantitative model could quickly predict the content of CR from inside and outside of ZJ. Zebrafish experiments showed that ZJ, Shaanxi (SX), Henan (HN), and Sichuan (SC) CR had significant analgesic effects, while Hebei (HB) CR had no significant analgesic effect. Overall comparison, the analgesic effect of ZJ CR was better than that of CR outside ZJ. The comprehensive score of the grey correlation degree between YAPJ, YSBMT, YSXBJ, TQZJJ, YHSYS, YHSJS, SQXBJ, and SQHLJ were higher than 0.9, and the research frequency were extremely high. CONCLUSIONS: The relative importance of the content and origin of most components of ZJ CR was higher than that of CR outside ZJ. The holistic analgesic effect of ZJ CR was better than that of CR outside ZJ, but slightly lower than that of SX CR. YHSJS and SQHLJ could be used as the core components to identify ZJ CR. YAPJ, YSBMT, YSXBJ, TQZJJ, YHSYS, SQXBJ, YHSJS, and SQHLJ could be used as the quality control components of ZJ CR. The multidimensional evaluation method used in this study provided a reference for the quality control and material basis research of ZJ CR.

Analysis of Quality Differences in Radix Dipsaci before and after Processing with Salt Based on Quantitative Control of HPLC Multi-Indicator Components Combined with Chemometrics.

Radix Dipsaci (RD) is the dry root of the Dipsacus asper Wall. ex DC., which is commonly used for tonifying the kidney and strengthening bone. The purpose of this study was to analyze the difference between raw and salt-processed RD from the chemical composition comprehensively. The fingerprints of raw and salt-processed RD were established by HPLC-DAD to determine the contents of loganin (LN), asperosaponin VI (AVI), caffeic acid (CaA), dipsanoside A (DA), dipsanoside B (DB), chlorogenic acid (CA), loganic acid (LA), isochlorogenic acid A (IA), isochlorogenic acid B (IB), and isochlorogenic acid C (IC). The results showed that after processing with salt, the components with increased contents were LA, CaA, DA, and AVI, and the components with decreased contents were CA, LN, IB, IA, IC, and DB. Then, the chemometric methods such as principal component analysis (PCA) and fisher discriminant analysis (FDA) were used to evaluate the quality of raw and salt-processed RD. In the classification of raw and salt-processed RD, the order of importance of each chemical component was LA > DB > IA > IC > IB > LN > CA > DA > AVI > CaA. These integrated methods successfully assessed the quality of raw and salt-processed RD, which will provide guidance for the development of RD as a clinical medication.

Effect of bone mass density and alveolar bone resorption on stress in implant restoration of free-end edentulous posterior mandible: Finite element analysis of double-factor sensitivity.

BACKGROUND: Osseous condition of the mandible was regarded as a key factor influencing stability of implants in the early stage. Finite element analysis was used to assess the effect of bone mass density and alveolar bone resorption (double factors) on stress in a four-unit implant restoration of a free-end edentulous posterior mandible. METHODS: A 3D finite element model was constructed for a single-sided free-end edentulous mandible (from mandibular first premolar to mandibular second molar) containing threaded dental implants. Mandible sensitivity modes were constructed with different alveolar bone resorption levels for normal conditions as well as mild, moderate and severe periodontitis, respectively. Based on the mass density of cancellous bone for four types of bones as the sensitivity parameter, two implant design modes were constructed: Model A (four-unit fixed bridge supported by three implants, implant positions were 34, 36 and 37) and model B: 34 × 36, 37 (37: a single implant crown) (34 × 36: three-unit fixed bridge supported by two implants, implant positions were 34 and 36). A total of 32 sensitivity-based finite element models, grouped in two groups, were constructed. Stress distribution and maximum von Mises stress on cortical bone and cancellous bone around the implant, as well as the surface of implant were investigated by using ABAQUS when vertical loading and 45° oblique loading were applied, respectively. RESULTS: When vertical loading was applied on the implant, maximum von Mises stress on the cortical bone around the implant was assessed to be 4.726 MPa - 13.15 MPa and 6.254 MPa - 13.79 MPa for groups A and B, respectively; maximum stress on the cancellous bone around the implant was 2.641 MPa - 3.773 MPa and 2.864 MPa - 4.605 MPa, respectively; maximum stress on the surface of implant was 14.7 MPa - 21.17 MPa and 21.64 MPa - 30.70 MPa, respectively. When 45° oblique loading was applied on the implant restoration, maximum von Mises stress on the cortical bone around the implant was assessed to be 42.08 MPa - 92.71 MPa and 50.84 MPa - 102.5 MPa for groups A and B, respectively; maximum stress on the cancellous bone around the implant was 4.88 MPa - 25.95 MPa and 5.227 MPa - 28.43 MPa, respectively; maximum stress on the surface of implant was 77.91 MPa - 124.8 MPa and 109.2 MPa - 150.7 MPa, respectively. Stress peak on the cortical bone and that on cancellous bone around the implant increased and decreased with the decrease in bone mass density, respectively. Stress peak on alveolar bone increased with alveolar bone resorption when oblique loading was applied. CONCLUSION: 1. Both alveolar bone resorption and bone mass density (double factors) are critical to implant restoration. Bone mass density may exhibit a more pronounced impact than alveolar bone resorption. 2. From the biomechanical perspective, types I and II bones are preferred for implant restoration, while implantation should be considered carefully in the case of type III bones, or those with less bone mass density accompanied by moderate to severe alveolar bone loss. 3. Splinting crowns restoration is biomechanically superior to single crown restoration.

A new species of Floronia Simon, 1887 from Baiyan Cave in Guizhou Province, China (Araneae, Linyphiidae).

Floroniahuishuiensis Zhou & Xu, sp. nov. (♂♀) is the first species in the genus Floronia to be described from Baiyan Cave in Guizhou Province, China. The new species is similar to F.zhejiangensis Zhu, Chen & Sha, 1987 but differs in structural details of the genital organs, primarily by the presence of a well-developed retrolateral tibial apophysis, a hook-shaped distal end of the radix in the male palp, and the rectangular posterior median plate in the epigyne. The illustration of copulatory organs of F.bucculenta (Clerck, 1757) and F.zhejiangensis Zhu, Chen & Sha, 1987 were reproduced here for comparison. A detailed description, photographs of the habitus and copulatory organs of the new species and a distribution map is provided.

Determination of Characteristic Volatile Component Fingerprint of Peucedanum Praeruptorum Dunn at Different Harvest Periods Based on HS-GC-IMS.

BACKGROUND: Peucedanum praeruptorum Dunn (PPD) is a Chinese herbal medicine with medicinal value. Clinical studies have shown that PPD has protective effects against wind-heat, cough, asthma, cardiovascular diseases, and cancer. Therefore, cultivation of PPD is becoming more common. However, it has been difficult to determine the optimal harvest period for botanical Chinese medicines such as PPD. OBJECTIVES: Odor characteristics are directly related to the chemical components contained in traditional Chinese medicines. In particular, for traditional Chinese medicines such as PPD that are rich in volatile components, higher quality usually means more beneficial volatile components. The purpose of this study was to analyze changes in PPD volatile components across different harvest periods, and provide the basis for the identification of the ideal harvest period to ensure PPD quality. METHODS: We measured the volatile components of PPD at different harvest periods using HS-GC-IMS to characterize its volatile component fingerprint at different harvest periods. RESULTS: We identified 80 volatile components in PPD across five harvest periods, and combined complex heatmap and PCA methods distinguish the characteristics of the different harvest periods, and used ion mobility spectrometry to determine the volatile organic compounds (VOCs), which mainly included compounds such as olefins, esters, alcohols, aldehydes, and ketones, and determined that the abundance of volatile components reached a peak in December. CONCLUSIONS: The fingerprint determination of characteristic volatile components based on HS-GC-IMS can distinguish PPD in different harvest periods. HIGHLIGHTS: We used HS-GC-IMS to determine the characteristic fingerprint of volatile components from PPD across different harvest periods. This approach differs from past studies, which have determined the optimal harvest time of medicinal materials based on only the content of a single active ingredient.

Exploring active ingredients of anti-osteoarthritis in raw and wine-processed Dipsaci Radix based on spectrum-effect relationship combined with chemometrics.

ETHNOPHARMACOLOGICAL RELEVANCE: Dipsaci Radix (DR) is the dry root of the Dipsacus asper Wall. ex DC., which has the function of tonifying the liver and kidney, continuing tendons and bones, and regulating blood vessels. However, there are few reports on the main active ingredients. AIM OF THE STUDY: This study aimed to find the main active components of DR in the treatment of osteoarthritis (OA) by spectrum-effect relationship and compare the differences between RDR and WDR. MATERIALS AND METHODS: Firstly, the high-performance liquid chromatography (HPLC) method was used to establish the fingerprint of DR, and 10 peaks of them were determined by UPLC-Q-TOF/MS. Then, the OA rat model was established by injecting sodium iodoacetate to study the effect of DR on OA. The spectrum-effect relationship was analyzed by grey relational analysis (GRA) and Pearson correlation analysis. RESULTS: According to the pharmacological results, compared with the model group, the cartilage score, tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), and interleukin-6 (IL-6), and Mankin score of rats in low, medium and high dose groups were decreased, and the therapeutic effect of wine-processed DR tended to be better than raw DR at the same dose. Finally, the active components of DR were preliminarily determined as 4 (loganic acid), 6 (chlorogenic acid), 8 (caffeic acid), 14 (dipsanoside B), 16, and 17 (asperosaponin VI) which had a large correlation in GRA and Pearson correlation analysis. CONCLUSION: This study established the spectrum-effect relationship between the raw and wine-processed DR for the first time, which provided a theoretical basis for the study of the pharmacodynamic substance basis of DR before and after processing. This research provided a reference for the subsequent study of DR.

Research on the effect of Dipsaci Radix before and after salt-processed on kidney yang deficiency syndrome rats and the preliminary mechanism study through the BMP-Smad signaling pathway.

ETHNOPHARMACOLOGICAL RELEVANCE: Dipsaci Radix (DR) is the dry root of Dipsacus asper Wall. ex DC. AIM OF THE STUDY: The purpose of this study was to compare the effects of DR on rats before and after salt-processed with kidney yang deficiency syndrome (KYDS), and we selected the BMP-Smad signaling pathway to explore the mechanism of DR. MATERIALS AND METHODS: The model of KYDS was established by subcutaneous injection of hydrocortisone, the crude DR (CDR) and salt-processed DR (SDR) were given the corresponding dose (2 g/kg, 4 g/kg, and 6 g/kg). The organ index and the contents of adrenocorticotropic hormone (ACTH), cortistatin (CORT), thyroid hormone (T4), tumor necrosis factor-alpha (TNF-α), testosterone (T), estradiol (E2), cyclic adenosine monophosphate (cAMP), cyclic guanosine monophosphate (cGMP), Na+-K+-ATPase, and growth hormone (GH) in serum were measured to evaluate the intervention effect of DR on KYDS rats. The expression of Smad 1, Smad 4, Smad 5, Smad 8, and BMP 7 protein in kidney was determined by immunohistochemistry, quantitative PCR (qPCR) and Western blot analysis. The effects of DR on 5 expression factors in the BMP-Smad signaling pathway were studied. Constituents absorbed into blood were identified by UPLC-Q-TOF/MS. RESULTS: The results showed that compared with the model group, the thymus and kidney index, as well as the contents of ACTH, CORT, cAMP, GH, Na+-K+-ATPase, T, T4, and E2 were significantly increased in the CDR and SDR groups, and the contents of cGMP and TNF-α were significantly decreased. Compared with the CDR high dose group, ACTH, Na+-K+-ATPase, T, and T4 were significantly increased in the SDR high dose group. The results of immunohistochemistry, qPCR, and Western blot analysis showed that compared with the model group, the expression levels of Smad 1, Smad 4, Smad 5, Smad 8 and BMP 7 proteins in the kidney of DR groups were significantly increased. And SDR groups tended to be better than CDR groups. 8 constituents migrating to blood were identified. CONCLUSION: This study showed that both CDR and SDR could have a good therapeutic effect on KYDS, and SDR was better than CDR. This study chose the BMP-Smad signaling pathway to study the mechanism of DR in the treatment of KYDS and provided a scientific basis for the processing mechanism of salt-processed.

Comparative analysis of anti-osteoporosis efficacy in Radix Dipsaci before and after processing with salt based on spectrum-effect relationship.

Radix Dipsaci (RD) is the dry root of the Dipsacus asper Wall. ex DC., which has the effect of strengthening muscles and bones. The purpose of this study was to find the main active ingredients that could improve the anti-osteoporosis efficacy of RD after processing with salt. The fingerprints of raw and salt-processed RD were established by HPLC-DAD to determine the common components. Then, an experimental study on the anti-osteoporosis efficacy was carried out to compared the difference in the efficacy between raw and salt-processed RD. Pharmacological results showed that, compared with the model group, both the raw and salt-processed RD were able to increase the Ca, bone mineral content, bone mineral density, trabeculae bone area and number of trabeculae bone of rats, and reduce the P, alkaline phosphatase, osteocalcin and trabecular bone separation of rats. Under the same dose, the pharmacological effect of salt-processed RD group was better than that of raw RD group. Finally, spectrum-effect relationship between fingerprints and anti-osteoporosis efficacy of RD was assessed by grey relational analysis and entropy method to screening out the ingredients that affect the anti-osteoporosis efficacy in RD after processing with salt. The results showed that the anti-osteoporosis efficacy of salt-processed RD was stronger than that of raw RD, and the pharmacologically active ingredients that improved its anti-osteoporosis efficacy after processing with salt were peak 4, peak 7 (caffeic acid), peak 8 (loganin), peak 12 (isochlorogenic acid C), peak 13 (dipsanoside A) and peak 14. As far as we known, this was the first time to establish the spectrum-effect relationship between RD and anti-osteoporosis efficacy, which laid the foundation for the follow-up research on the pharmacodynamic components and molecular mechanism of RD.

Research on the effect of spleen-invigorating and anti-swelling active ingredients in crude and processed coix seed based on Spectrum - Effects relationship combined with chemometrics.

Coix seed (CS) is the dry mature seed kernel of Coix lacrma-jobi L. var. mayuen (Roman.) Stapf, which has the effect of spleen-invigorating and anti-swelling. However, research reports on the main active ingredients of CS were minimal. The purpose of this study was to find the main active ingredients that affect the efficacy of CS to invigorate the spleen and reduce swelling through the spectrum-effect relationship, combined with chemometrics, grey relational analysis (GRA) and entropy method, and to compare the differences between the effects of crude and processed CS. First of all, the HPLC-ELSD method was used to establish the chromatographic fingerprint of CS, and 12 batches of CS samples were analyzed through chemometrics in this study. Then, we studied the effect of spleen-invigorating and anti-swelling in CS. Finally, through grey relational analysis and entropy method, the spectrum-effect relationship between the chromatographic fingerprint and the seven pharmacodynamic effect indexes was studied. The results showed that the main pharmacologically active ingredients were 1,3-Dioleoyl-2-palmitoylglycerol (peak 8), 1,2-dilinoleoyl-3-oleoyl-rac-glycerol (peak 2), 1,3-Dipalmitoyl-2-Linolein (peak 5), 1,2-Dilinoleoyl-3-palmitoyl-rac-glycerol (peak 3), 1,2-Dioleoyl-3-linoleoyl-rac-glycerol (peak 4), and glycerol trioleate (peak 7), and the comprehensive efficacy of bran-fried CS was better than that of raw CS. In summary, we have identified the main active ingredients related to the efficacy of CS. As far as we know, this is the first time that the crude and processed CS spectrum-effect relationship has been established and compared, which provides a theoretical basis for subsequent studies on the material basis and molecular mechanism of CS pharmacodynamics.