Mediating Photochemical Reaction Rates at Lewis Acidic Rare Earths by Selective Energy Loss to 4f-Electron States.

Manifesting chemical differences in individual rare earth (RE) element complexes is challenging due to the similar sizes of the tripositive cations and the corelike 4f shell. We disclose a new strategy for differentiating between similarly sized Dy3+ and Y3+ ions through a tailored photochemical reaction of their isostructural complexes in which the f-electron states of Dy3+ act as an energy sink. Complexes RE(hfac)3(NMMO)2 (RE = Dy (2-Dy) and Y (2-Y), hfac = hexafluoroacetylacetonate, and NMMO = N-methylmorpholine-N-oxide) showed variable rates of oxygen atom transfer (OAT) to triphenylphosphine under ultraviolet (UV) irradiation, as monitored by 1H and 19F NMR spectroscopies. Ultrafast transient absorption spectroscopy (TAS) identified the excited state(s) responsible for the photochemical OAT reaction or lack thereof. Competing sensitization pathways leading to excited-state deactivation in 2-Dy through energy transfer to the 4f electron manifold ultimately slows the OAT reaction at this metal cation. The measured rate differences between the open-shell Dy3+ and closed-shell Y3+ complexes demonstrate that using established principles of 4f ion sensitization may deliver new, selective modalities for differentiating the RE elements that do not depend on cation size.

Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications.

Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.

Metal chalcogenides for neuromorphic computing: emerging materials and mechanisms.

The approaching end of Moore's law scaling has significantly accelerated multiple fields of research including neuromorphic-, quantum-, and photonic computing, each of which possesses unique benefits unobtained through conventional binary computers. One of the most compelling arguments for neuromorphic computing systems is power consumption, noting that computations made in the human brain are approximately 106times more efficient than conventional CMOS logic. This review article focuses on the materials science and physical mechanisms found in metal chalcogenides that are currently being explored for use in neuromorphic applications. We begin by reviewing the key biological signal generation and transduction mechanisms within neuronal components of mammalian brains and subsequently compare with observed experimental measurements in chalcogenides. With robustness and energy efficiency in mind, we will focus on short-range mechanisms such as structural phase changes and correlated electron systems that can be driven by low-energy stimuli, such as temperature or electric field. We aim to highlight fundamental materials research and existing gaps that need to be overcome to enable further integration or advancement of metal chalcogenides for neuromorphic systems.

Enhanced spin pumping into superconductors provides evidence for superconducting pure spin currents.

Unlike conventional spin-singlet Cooper pairs, spin-triplet pairs can carry spin1,2. Triplet supercurrents were discovered in Josephson junctions with metallic ferromagnet spacers, where spin transport can occur only within the ferromagnet and in conjunction with a charge current. Ferromagnetic resonance injects a pure spin current from a precessing ferromagnet into adjacent non-magnetic materials3,4. For spin-singlet pairing, the ferromagnetic resonance spin pumping efficiency decreases below the critical temperature (Tc) of a coupled superconductor5,6. Here we present ferromagnetic resonance experiments in which spin sink layers with strong spin-orbit coupling are added to the superconductor. Our results show that the induced spin currents, rather than being suppressed, are substantially larger in the superconducting state compared with the normal state; although further work is required to establish the details of the spin transport process, we show that this cannot be mediated by quasiparticles and is most likely a triplet pure spin supercurrent.

Deresuscitation of Patients With Iatrogenic Fluid Overload Is Associated With Reduced Mortality in Critical Illness.

OBJECTIVES: To characterize current practice in fluid administration and deresuscitation (removal of fluid using diuretics or renal replacement therapy), the relationship between fluid balance, deresuscitative measures, and outcomes and to identify risk factors for positive fluid balance in critical illness. DESIGN: Retrospective cohort study. SETTING: Ten ICUs in the United Kingdom and Canada. PATIENTS: Adults receiving invasive mechanical ventilation for a minimum of 24 hours. INTERVENTIONS: None. MEASUREMENTS AND MAIN RESULTS: Four-hundred patients were included. Positive cumulative fluid balance (fluid input greater than output) occurred in 87.3%: the largest contributions to fluid input were from medications and maintenance fluids rather than resuscitative IV fluids. In a multivariate logistic regression model, fluid balance on day 3 was an independent risk factor for 30-day mortality (odds ratio 1.26/L [95% CI, 1.07-1.46]), whereas negative fluid balance achieved in the context of deresuscitative measures was associated with lower mortality. Independent predictors of greater fluid balance included treatment in a Canadian site. CONCLUSIONS: Fluid balance is a practice-dependent and potentially modifiable risk factor for adverse outcomes in critical illness. Negative fluid balance achieved with deresuscitation on day 3 of ICU stay is associated with improved patient outcomes. Minimization of day 3 fluid balance by limiting maintenance fluid intake and drug diluents, and using deresuscitative measures, represents a potentially beneficial therapeutic strategy which merits investigation in randomized trials.

Gate-Sensing Coherent Charge Oscillations in a Silicon Field-Effect Transistor.

Quantum mechanical effects induced by the miniaturization of complementary metal-oxide-semiconductor (CMOS) technology hamper the performance and scalability prospects of field-effect transistors. However, those quantum effects, such as tunneling and coherence, can be harnessed to use existing CMOS technology for quantum information processing. Here, we report the observation of coherent charge oscillations in a double quantum dot formed in a silicon nanowire transistor detected via its dispersive interaction with a radio frequency resonant circuit coupled via the gate. Differential capacitance changes at the interdot charge transitions allow us to monitor the state of the system in the strong-driving regime where we observe the emergence of Landau-Zener-Stückelberg-Majorana interference on the phase response of the resonator. A theoretical analysis of the dispersive signal demonstrates that quantum and tunneling capacitance changes must be included to describe the qubit-resonator interaction. Furthermore, a Fourier analysis of the interference pattern reveals a charge coherence time, T2 ≈ 100 ps. Our results demonstrate charge coherent control and readout in a simple silicon transistor and open up the possibility to implement charge and spin qubits in existing CMOS technology.

A charge parity ammeter.

A metallic double dot is measured with radio frequency reflectometry. Changes in the total electron number of the double dot are determined via single electron tunnelling contributions to the complex electrical impedance. Electron counting experiments are performed by monitoring the impedance, demonstrating operation of a single electron ammeter without the need for external charge detection.

An exchange-coupled donor molecule in silicon.

We present a combined experimental-theoretical demonstration of the energy spectrum and exchange coupling of an isolated donor pair in a silicon nanotransistor. The molecular hybridization of the atomic orbitals leads to an enhancement of the one- and two-electron binding energies and charging energy with respect to the single donor case, a desirable feature for quantum electronic devices. Our hydrogen molecule-like model based on a multivalley central-cell corrected effective mass theory incorporating a full configuration interaction treatment of the 2-electron spectrum matches the measured data for an arsenic diatomic molecule with interatomic distance R = 2.3 ± 0.5 nm.

Free carrier generation in organic photovoltaic bulk heterojunctions of conjugated polymers with molecular acceptors: planar versus spherical acceptors.

A comparative study of the photophysical performance of the prototypical fullerene derivative PC61BM with a planar small-molecule acceptor in an organic photovoltaic device is presented. The small-molecule planar acceptor is 2-[{7-(9,9-di-n-propyl-9H-fluoren-2-yl)benzo[c][1,2,5]thiadiazol-4-yl}methylene]malononitrile, termed K12. We discuss photoinduced free charge-carrier generation and transport in blends of PC61BM or K12 with poly(3-n-hexylthiophene) (P3HT), surveying literature results for P3HT:PC61BM and presenting new results on P3HT:K12. For both systems we also review previous work on film structure and correlate the structural and photophysical results. In both cases, a disordered mixed phase is formed between P3HT and the acceptor, although the photophysical properties of this mixed phase differ markedly for PC61BM and K12. In the case of PC61BM the mixed phase acts as a free carrier generation region that can efficiently shuttle carriers to the pure polymer and fullerene domains. As a result, the vast majority of excitons quenched in P3HT:PC61BM blends yield free carriers detected by the contactless time-resolved microwave conductivity (TRMC) method. In contrast, approximately 85% of the excitons quenched in P3HT:K12 do not result in free carriers over the nanosecond timescale of the TRMC experiment. We attribute this to poor electron-transport properties in the mixed P3HT:K12 phase. We propose that the observed differences can be traced to the respective shapes of PC61BM and K12: the three-dimensional nature of the fullerene cage facilitates coupling between PC61BM molecules irrespective of their relative orientation, whereas for K12 strong electronic coupling is only expected for molecules oriented with their π systems parallel to each other. Comparison between the eutectic compositions of the P3HT:PC61BM and P3HT:K12 shows that the former contains enough fullerene to form a percolation pathway for electrons, whereas the latter contains a sub-percolating volume fraction of the planar acceptor. Furthermore, the planar K12 co-assembles with P3HT into a disordered, glassy phase that partly accounts for the poor electron-transport properties, and may also enhance recombination due to the strong intermolecular interactions between the donor and the acceptor. The implication for the performance of organic photovoltaic devices with the two acceptors is also discussed.

Delivery of sevoflurane to dogs using a Stephens anaesthetic machine.

OBJECTIVE: To investigate the sevoflurane concentrations produced within the Stephens anaesthetic machine circuit (vaporizer in-circle system) at different fresh gas flow rates (FGFRs), temperatures, vaporizer settings and vaporizer sleeve positions when used to anaesthetize dogs of different body sizes. STUDY DESIGN: Experimental non-blinded studies. ANIMALS: Eighteen mixed breed dogs, weights 4-39 kg. METHODS: Anaesthetic induction with propofol was followed by maintenance with sevoflurane in oxygen via the Stephens anaesthetic machine. In study 1, the vaporizer setting, temperature and circuit FGFRs were altered with the vaporizer sleeve down (n = 3), or in separate experiments, up (n = 3). Delivered (Fi'SEVO) and expired sevoflurane concentrations were recorded. Study 2 determined the vaporizer settings (sleeve up) required to achieve predetermined multiples of minimal alveolar concentration (MAC) of Fi'SEVO when sevoflurane was delivered to dogs (n = 12) of different bodyweights and at different FGFRs. RESULTS: Delivered concentrations of sevoflurane were sufficient to maintain anaesthesia in all dogs, regardless of bodyweight, FGFR, vaporizer temperature and sleeve position. Fi'SEVO increased with increasing temperature, when the vaporizer sleeve was down, when vaporizer setting was increased and when FGFR was decreased. As the FGFR increased or the dog's bodyweight decreased, higher vaporizer settings were required to produce the same Fi'SEVO. The median Stephens vaporizer settings to achieve an Fi'SEVO of 1.3 MAC ranged from 4.3 to 5.0 for a small dog (1-10 kg), 2.5 to 5.6 for a medium dog (15-25 kg) and 2.5 to 3.5 for a large dog (30-40 kg), depending on the FGFR. CONCLUSION AND CLINICAL RELEVANCE: The Stephens anaesthetic machine can deliver to dogs, weighing 4 kg and above, concentrations of sevoflurane sufficient or in excess of that required to maintain anaesthesia, at temperatures from 10 to 35 °C, FGFRs of 1 to 5 times the patient's estimated metabolic oxygen requirement and at any vaporizer sleeve position.

Carrier density and delocalization signatures in doped carbon nanotubes from quantitative magnetic resonance.

High-performance semiconductor materials and devices are needed to supply the growing energy and computing demand. Organic semiconductors (OSCs) are attractive options for opto-electronic devices, due to their low cost, extensive tunability, easy fabrication, and flexibility. Semiconducting single-walled carbon nanotubes (s-SWCNTs) have been extensively studied due to their high carrier mobility, stability and opto-electronic tunability. Although molecular charge transfer doping affords widely tunable carrier density and conductivity in s-SWCNTs (and OSCs in general), a pervasive challenge for such systems is reliable measurement of charge carrier density and mobility. In this work we demonstrate a direct quantification of charge carrier density, and by extension carrier mobility, in chemically doped s-SWCNTs by a nuclear magnetic resonance approach. The experimental results are verified by a phase-space filling doping model, and we suggest this approach should be broadly applicable for OSCs. Our results show that hole mobility in doped s-SWCNT networks increases with increasing charge carrier density, a finding that is contrary to that expected for mobility limited by ionized impurity scattering. We discuss the implications of this important finding for additional tunability and applicability of s-SWCNT and OSC devices.

The Excited-State Lifetime of Poly(NDI2OD-T2) Is Intrinsically Short.

Conjugated polymers composed of alternating electron donor and acceptor segments have come to dominate the materials being considered for organic photoelectrodes and solar cells, in large part because of their favorable near-infrared absorption. The prototypical electron-transporting push-pull polymer poly(NDI2OD-T2) (N2200) is one such material. While reasonably efficient organic solar cells can be fabricated with N2200 as the acceptor, it generally fails to contribute as much photocurrent from its absorption bands as the donor with which it is paired. Moreover, transient absorption studies have shown N2200 to have a consistently short excited-state lifetime (∼100 ps) that is dominated by a ground-state recovery. In this paper, we investigate whether these characteristics are intrinsic to the backbone structure of this polymer or if these are extrinsic effects from ubiquitous solution-phase and thin-film aggregates. We compare the solution-phase photophysics of N2200 with those of a pair of model compounds composed of alternating bithiophene (T2) donor and naphthalene diimide (NDI) acceptor units, NDI-T2-NDI and T2-NDI-T2, in a dilute solution. We find that the model compounds have even faster ground-state recovery dynamics (τ = 45, 27 ps) than the polymer (τ = 133 ps), despite remaining molecularly isolated in solution. In these molecules, as in the case of the N2200 polymer, the lowest excited state has a T2 to NDI charge-transfer (CT) character. Electronic-structure calculations indicate that the short lifetime of this state is due to fast nonradiative decay to the ground state (GS) promoted by strong CT-GS electronic coupling and strong electron-vibrational coupling with high-frequency (quantum) normal modes.

Optical Memory, Switching, and Neuromorphic Functionality in Metal Halide Perovskite Materials and Devices.

Metal halide perovskite based materials have emerged over the past few decades as remarkable solution-processable optoelectronic materials with many intriguing properties and potential applications. These emerging materials have recently been considered for their promise in low-energy memory and information processing applications. In particular, their large optical cross-sections, high photoconductance contrast, large carrier-diffusion lengths, and mixed electronic/ionic transport mechanisms are attractive for enabling memory elements and neuromorphic devices that are written and/or read in the optical domain. Here, recent progress toward memory and neuromorphic functionality in metal halide perovskite materials and devices where photons are used as a critical degree of freedom for switching, memory, and neuromorphic functionality is reviewed.

Nanoscale Photoexcited Carrier Dynamics in Perovskites.

The optoelectronic properties of lead halide perovskite thin films can be tuned through compositional variations and strain, but the associated nanocrystalline structure makes it difficult to untangle the link between composition, processing conditions, and ultimately material properties and degradation. Here, we study the effect of processing conditions and degradation on the local photoconductivity dynamics in [(CsPbI3)0.05(FAPbI3)0.85(MAPbBr3)0.15] and (FA0.7Cs0.3PbI3) perovskite thin films using temporally and spectrally resolved microwave near-field microscopy with a temporal resolution as high as 5 ns and a spatial resolution better than 50 nm. For the latter FACs formulation, we find a clear effect of the process annealing temperature on film morphology, stability, and spatial photoconductivity distribution. After exposure of samples to ambient conditions and illumination, we find spectral evidence of halide segregation-induced degradation below the instrument resolution limit for the mixed halide formulation, while we find a clear spatially inhomogeneous increase in the carrier lifetime for the FACs formulation annealed at 180 °C.

Feasibility of conservative fluid administration and deresuscitation compared with usual care in critical illness: the Role of Active Deresuscitation After Resuscitation-2 (RADAR-2) randomised clinical trial.

PURPOSE: Fluid overload is common in critical illness and is associated with mortality. This study investigated the feasibility of a randomised trial comparing conservative fluid administration and deresuscitation (active removal of accumulated fluid using diuretics or ultrafiltration) with usual care in critical illness. METHODS: Open-label, parallel-group, allocation-concealed randomised clinical feasibility trial. Mechanically ventilated adult patients expected to require critical care beyond the next calendar day were enrolled between 24 and 48 h following admission to the intensive care unit (ICU). Patients were randomised to either a 2-stage fluid strategy comprising conservative fluid administration and, if fluid overload was present, active deresuscitation, or usual care. The primary endpoint was fluid balance in the 24 h up to the start of study day 3. Secondary endpoints included cumulative fluid balance, mortality, and duration of mechanical ventilation. RESULTS: One hundred and eighty patients were randomised. After withdrawal of 1 patient, 89 patients assigned to the intervention were compared with 90 patients assigned to the usual care group. The mean plus standard deviation (SD) 24-h fluid balance up to study day 3 was lower in the intervention group (- 840 ± 1746 mL) than the usual care group (+ 130 ± 1401 mL; P < 0.01). Cumulative fluid balance was lower in the intervention group at days 3 and 5. Overall, clinical outcomes did not differ significantly between the two groups, although the point estimate for 30-day mortality favoured the usual care group [intervention arm: 19 of 90 (21.6%) versus usual care: 14 of 89 (15.6%), P = 0.32]. Baseline imbalances between groups and lack of statistical power limit interpretation of clinical outcomes. CONCLUSIONS: A strategy of conservative fluid administration and active deresuscitation is feasible, reduces fluid balance compared with usual care, and may cause benefit or harm. In view of wide variations in contemporary clinical practice, large, adequately powered trials investigating the clinical effectiveness of conservative fluid strategies in critically ill patients are warranted.

Excited-state processes in first-generation phenyl-cored thiophene dendrimers.

First generation dendrimers with three oligothiophene arms (meta-arranged, 3G1-nS) and four arms (ortho- and para-arranged, 4G1-nS) connected to a central phenyl core were investigated spectroscopically in solution. In all dendrimers, on an ultrafast time scale (<10 ps), two "cooling" processes convert the initially generated, "hot" exciton into the geometrically relaxed, "cold" exciton. A decrease in the triplet yield, particularly evident for the 4-arm dendrimers; intersystem crossing rate; and nonradiative triplet decay time with increasing number of bridging thiophene units n all meet with expectations from prior studies on linear oligothiophenes. A relatively fast internal conversion process (>0.6 ns(-1)) is observed in both dendrimer series, possibly due to increased twisting about the phenyl core that reduces the triplet yields considerably with respect to oligothiophenes. An anomalous shifting of the triplet-triplet absorption spectra characterizes the 4G1-nS dendrimers as unique from the 3G1-nS series in terms of the hindrance of torsional motion and confinement of excited states enforced by the arrangement of dendrons.

Prolonging charge separation in P3HT-SWNT composites using highly enriched semiconducting nanotubes.

Single-walled carbon nanotubes (SWNTs) have potential as electron acceptors in organic photovoltaics (OPVs), but the currently low-power conversion efficiencies of devices remain largely unexplained. We demonstrate effective redispersion of isolated, highly enriched semiconducting and metallic SWNTs into poly(3-hexylthiophene) (P3HT). We use these enriched blends to provide the first experimental evidence of the negative impact of metallic nanotubes. Time-resolved microwave conductivity reveals that the long-lived carrier population can be significantly increased by incorporating highly enriched semiconducting SWNTs into semiconducting polymer composites.

Linking optical spectra to free charges in donor/acceptor heterojunctions: cross-correlation of transient microwave and optical spectroscopy.

The primary photoexcited species in excitonic semiconductors is a bound electron-hole pair, or exciton. An important strategy for producing separated electrons and holes in photoexcited excitonic semiconductors is the use of donor/acceptor heterojunctions, but the degree to which the carriers can escape their mutual Coulomb attraction is still debated for many systems. Here, we employ a combined pump-probe ultrafast transient absorption (TA) spectroscopy and time-resolved microwave conductivity (TRMC) study on a suite of model excitonic heterojunctions consisting of mono-chiral semiconducting single-walled carbon nanotube (s-SWCNT) electron donors and small-molecule electron acceptors. Comparison of the charge-separated state dynamics between TA and TRMC photoconductance reveals a quantitative match over the 0.5 microsecond time scale. Charge separation yields derived from TA allow extraction of s-SWCNT hole mobilities of ca. 1.5 cm2 V-1 s-1 (at 9 GHz) by TRMC. The correlation between the techniques conclusively demonstrates that photoinduced charge carriers separated across these heterojunctions do not form bound charge transfer states, but instead form free/mobile charge carriers.

Probing the Origin of the Open Circuit Voltage in Perovskite Quantum Dot Photovoltaics.

Perovskite quantum dots (PQDs) have many properties that make them attractive for optoelectronic applications, including expanded compositional tunability and crystallographic stabilization. While they have not achieved the same photovoltaic (PV) efficiencies of top-performing perovskite thin films, they do reproducibly show high open circuit voltage (VOC) in comparison. Further understanding of the VOC attainable in PQDs as a function of surface passivation, contact layers, and PQD composition will further progress the field and may lend useful lessons for non-QD perovskite solar cells. Here, we use photoluminescence-based spectroscopic techniques to understand and identify the governing physics of the VOC in CsPbI3 PQDs. In particular, we probe the effect of the ligand exchange and contact interfaces on the VOC and free charge carrier concentration. The free charge carrier concentration is orders of magnitude higher than in typical perovskite thin films and could be tunable through ligand chemistry. Tuning the PQD A-site cation composition via replacement of Cs+ with FA+ maintains the background carrier concentration but reduces the trap density by up to a factor of 40, reducing the VOC deficit. These results dictate how to improve PQD optoelectronic properties and PV device performance and explain the reduced interfacial recombination observed by coupling PQDs with thin-film perovskites for a hybrid absorber layer.

Staphylococcal toxic shock syndrome: mechanisms and management.

Staphylococcal toxic shock syndrome is a rare complication of Staphylococcus aureus infection in which bacterial toxins act as superantigens, activating very large numbers of T cells and generating an overwhelming immune-mediated cytokine avalanche that manifests clinically as fever, rash, shock, and rapidly progressive multiple organ failure, often in young, previously healthy patients. The syndrome can occur with any site of S. aureus infection, and so clinicians of all medical specialties should have a firm grasp of the presentation and management. In this article, we review the literature on the pathophysiology, clinical features, and treatment of this serious condition with emphasis on recent insights into pathophysiology and on information of relevance to the practicing clinician.