Ultrathin Films of Porous Metal-Organic Polyhedra for Gas Separation.

Ultrathin films of a robust RhII -based porous metal-organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air-water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP-supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO2 permeance and CO2 /N2 selectivity, demonstrating the great combined potential of MOP and Langmuir-based techniques in separation technologies.

Metal-organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture?

The field of metal-organic framework based mixed matrix membranes (M(4)s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M(4)s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M(4) hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined.

Dilute Gd hydroxycarbonate particles for localized spin qubit integration.

Molecular spins are considered as the quantum hardware to build hybrid quantum processors in which coupling to superconducting devices would provide the means to implement the necessary coherent manipulations. As an alternative to large magnetically-dilute crystals or concentrated nano-scale deposits of paramagnetic molecules that have been studied so far, the use of pre-formed sub-micronic spherical particles of a doped Gd@Y hydroxycarbonate is evaluated here. Particles with an adjustable number of spin carriers are prepared through the control of both particle size and doping. Bulk magnetic properties and continuous wave and time-domain-EPR spectroscopy show that the Gd spins in these particles are potential qubits with robust quantum coherence. Monolayers of densely-packed particles are then formed interfacially and transferred successfully to the surface of Nb superconducting resonators. Alternatively, these particles are disposed at controlled localizations as isolated groups of a few particles through Dip-Pen Nanolithography using colloidal organic dispersions as ink. Altogether, this study offers new material and methodologies relevant to the development of viable hybrid quantum processors.

Evaluation of triphenylene-based MOF ultrathin films for lithium batteries.

Metal-organic frameworks (MOFs) are attractive candidates to meet the requirement of next-generation batteries, as functional materials with a high surface area, well-defined metal centers, and organic linkers through coordination bonds. Due to their great tunability, MOFs have been investigated as electrodes or electrolytes in lithium batteries and more recently as protective layers in anode-less batteries. Here, we synthesize a Ni3(HHTP)2 MOF directly at the air-liquid interface of a Langmuir trough and grow the electrode on a conductive substrate by the transference process. The characterization during Langmuir film formation shows that the addition of crystallization time during the compression process enhances the formation of 2D crystalline domains, as observed by in situ grazing-incidence X-ray diffraction. Next, the transferred Ni3(HHTP)2 ultrathin films were studied as working electrodes in Li batteries in a half-cell configuration and compared with bare copper. The results show that the Ni3(HHTP)2 film protects the Cu collector from oxidation, and the negative charge accumulates in the organic ligand during the lithiation process while NiII oxidizes to NiIII, unlike other triphenylene-based MOFs with CuII or CoII metal nodes. The galvanostatic plating-stripping cycles of the batteries show that the inclusion of the crystallization time improves the coulombic efficiency, especially significantly in the first cycles when the SEI is formed. This work shows the Langmuir technique as a useful tool to test MOF based materials for batteries with the advantages of using a low amount of raw materials and without the need to introduce additives (binder and electron conductor) in the electrodes. The electrochemical study of this type of electrode allows a first screening to synthesize electrodes based on MOFs and can be a tool for the preparation of protective coatings under optimized conditions.

Influence of the Surface Chemistry of Metal-Organic Polyhedra in Their Assembly into Ultrathin Films for Gas Separation.

The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.

Coating of Conducting and Insulating Threads with Porous MOF Particles through Langmuir-Blodgett Technique.

The Langmuir-Blodgett (LB) method is a well-known deposition technique for the fabrication of ordered monolayer and multilayer thin films of nanomaterials onto different substrates that plays a critical role in the development of functional devices for various applications. This paper describes detailed studies about the best coating configuration for nanoparticles of a porous metal-organic framework (MOF) onto both insulating or conductive threads and nylon fiber. We design and fabricate customized polymethylmethacrylate sheets (PMMA) holders to deposit MOF layers onto the threads or fiber using the LB technique. Two different orientations, namely, horizontal and vertical, are used to deposit MIL-96(Al) monolayer films onto five different types of threads and nylon fiber. These studies show that LB film formation strongly depends on deposition orientation and the type of threads or fiber. Among all the samples tested, cotton thread and nylon fiber with vertical deposition show more homogenous monolayer coverage. In the case of conductive threads, the MOF particles tend to aggregate between the conductive thread's fibers instead of forming a continuous monolayer coating. Our results show a significant contribution in terms of MOF monolayer deposition onto single fiber and threads that will contribute to the fabrication of single fiber or thread-based devices in the future.

Highly Selective Metal-Organic Framework Textile Humidity Sensor.

The increase in demand and popularity of smart textiles brings new and innovative ideas to develop a diverse range of textile-based devices for our daily life applications. Smart textile-based sensors (TEX sensors) become attractive due to the potential to replace current solid-state sensor devices with flexible and wearable devices. We have developed a smart textile sensor for humidity detection using a metal-organic framework (MOF) as an active thin-film layer. We show for the first time the use of the Langmuir-Blodgett (LB) technique for the deposition of a MIL-96(Al) MOF thin film directly onto the fabrics containing interdigitated textile electrodes for the fabrication of a highly selective humidity sensor. The humidity sensors were made from two different types of textiles, namely, linen and cotton, with the linen-based sensor giving the best response due to better coverage of MOF. The TEX sensor showed a reproducible response after multiple cycles of measurements. After 3 weeks of storage, the sensor showed a moderate decrease in response. Moreover, TEX sensors showed a high level of selectivity for the detection of water vapors in the presence of several volatile organic compounds (VOCs). Interestingly, the selectivity is superior to some of the previously reported MOF-coated solid-state interdigitated electrode devices and textile sensors. The method herein described is generic and can be extended to other textiles and coating materials for the detection of toxic gases and vapors.

Methanol and Humidity Capacitive Sensors Based on Thin Films of MOF Nanoparticles.

The successful development of modern gas sensing technologies requires high sensitivity and selectivity coupled to cost effectiveness, which implies the necessity to miniaturize devices while reducing the amount of sensing material. The appealing alternative of integrating nanoparticles of a porous metal-organic framework (MOF) onto capacitive sensors based on interdigitated electrode (IDE) chips is presented. We report the deposition of MIL-96(Al) MOF thin films via the Langmuir-Blodgett (LB) method on the IDE chips, which allowed the study of their gas/vapor sensing properties. First, sorption studies of several organic vapors like methanol, toluene, chloroform, etc. were conducted on bulk MOF. The sorption data revealed that MIL-96(Al) presents high affinity toward water and methanol. Later on, ordered LB monolayer films of MIL-96(Al) particles of ∼200 nm were successfully deposited onto IDE chips with homogeneous coverage of the surface in comparison to conventional thin film fabrication techniques such as drop-casting. The sensing tests showed that MOF LB films were selective for water and methanol, and short response/recovery times were achieved. Finally, chemical vapor deposition (CVD) of a porous thin film of Parylene C (thickness ∼250-300 nm) was performed on top of the MOF LB films to fabricate a thin selective layer. The sensing results showed an increase in the water selectivity and sensitivity, while those of methanol showed a huge decrease. These results prove the feasibility of the LB technique for the fabrication of ordered MOF thin films onto IDE chips using very small MOF quantities.

Molecular arrangement in Langmuir and Langmuir-Blodgett films of a mesogenic bent-core carboxylic acid.

A different alternative to previous research on Langmuir and Langmuir-Blodgett (LB) films of bent-core liquid crystals is reported in this work. A bent-shaped molecule wearing a terminal carboxylic group has been used to obtain monomolecular films with their long molecular axis almost perpendicular to the aqueous surface. Langmuir films at the air-liquid interface (pH=9) have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. A condensed phase is reached at surface pressures up to 20 mN x m-1. In this condensed phase, molecules are packed forming H-aggregates with a well-defined molecular orientation. Langmuir films have been transferred onto quartz and silicon substrates and characterized by means of UV-vis spectroscopy and XRR. The transference is Z-type, with a constant deposition of the monolayers. The total LB monolayer film thickness is evaluated to be about 5.8 nm, which is in good agreement with the deduced orientation at the air-liquid interface as well as with the lamellar order observed within the solid obtained by cooling the sample from the mesophase.

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr).

This work reports on the fabrication, optimization and characterization of ultrathin films containing submicrometer particles (sMPs) of the hydrophilic and water stable UiO-66-COOH(Zr) metal organic framework (MOF). MOF particles of ≈200 nm have been synthesized and assembled at the air-water interface by the Langmuir-Blodgett technique. The use of different solvents, mixtures of solvents and surfactants has been investigated in order to improve the stability of MOF dispersions and reduce particle aggregation. The compact MOF/surfactant films containing 10 wt % octadecylphoshonic acid (ODP) have been deposited on substrates of different nature by Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) methods, showing that the presence of even only one MOF/ODP monolayer can increase the water contact angle of highly hydrophilic substrates such as mica or glass up to 120°. These films were characterized by scanning electron microscopy, grazing incidence X-ray diffraction, Fourier transform infrared spectroscopy and atomic force microscopy, revealing the formation of a continuous film where ODP molecules adopt an almost vertical position and cover MOF particles. Moreover, the presence of MOF particles significantly enhances the surface roughness and allows ultrathin, hydrophobic coverage to be obtained. Finally, it has been shown that the crystallinity and the porosity of the MOF remains almost unaltered in MOF/ODP films.

The fabrication of ultrathin films and their gas separation performance from polymers of intrinsic microporosity with two-dimensional (2D) and three-dimensional (3D) chain conformations.

The expansion of the use of polymeric membranes in gas separation requires the development of membranes based on new polymers with improved properties and their assessment under real operating conditions. In particular, the fabrication of ultrathin films of high performance polymers that can be used as the selective layer in composite membranes will allow large reductions in the amount of the expensive polymer used and, hence, the cost of membrane fabrication. In this contribution, two polymers of intrinsic microporosity (PIMs) with very different chain configurations (two-dimensional, 2D, chains or conventional contorted three-dimensional, 3D, conformation) have been compared in their ability to form ultrathin films, showing the relevance of polymer design to obtain compact and defect-free films. Monolayers of the 2D polymer PIM-TMN-Trip can be efficiently deposited onto poly[1-(trimethylsilyl)-1-propyne] (PTMSP) to obtain composite membranes with a CO2/N2 selectivity similar to that of the corresponding thick membranes of the same PIM using only a small fraction of the selective polymer (less than 0.1%).

Physicochemical characterization of n-butyl-3-methylpyridinium dicyanamide [corrected] ionic liquid.

The room temperature ionic liquid n-butyl-3-methylpyridinium dicyanamide has been characterized. Physicochemical properties such as density, speed of sound, refractive index, surface tension, and kinematic viscosity of the studied liquid have been experimentally measured in a wide range of temperatures. From results, coefficients of thermal expansion, molar refractions, dynamic viscosities and entropies and enthalpies of surface formation per unit surface area at the studied temperatures have been derived. We have analyzed the achieved results for evaluating the effect of the anionic structure in these properties, getting interesting results which lead us to a better understanding of the behavior of the ions in the fluids. Moreover, thermal properties of several pyridinium-based ionic liquids have been investigated. Finally, from both dynamic viscosity values and glass transition temperature of the studied liquids, a detailed analysis of the behavior in fragility terms has been performed.

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films.

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.

Thin-Film Nanocomposite Membrane with the Minimum Amount of MOF by the Langmuir-Schaefer Technique for Nanofiltration.

An innovative procedure for positioning a monolayer of hydrophilic metal organic framework (MOF) MIL-101(Cr) (MIL, Materials of Institute Lavoisier) nanoparticles (NPs) in thin-film nanocomposite (TFN) membranes has been implemented by transferring a Langmuir-Schaefer (LS) film of the MOF in between the polyamide thin layer at the top and the cross-linked asymmetric polyimide (P84) support at the bottom. The presence and layout of the LS-MIL-101(Cr) monolayer in the TFN membrane was confirmed by scanning transmission electron microscopy imaging with a high-angle annular dark-field detector images and X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy, and atomic force microscopy analyses. This methodology requires the smallest amount of MOF reported to date, 3.8 µg cm-2, and promotes the formation of a defect-free ultrathin MOF film. Although conventional TFN membranes tend to show MOF agglomerates that could contribute to the formation of unselective defects, LS-TFN membranes, characterized by a homogeneous and continuous MOF coating, exhibit an optimal membrane performance, without a significant decrease in selectivity. Outstanding methanol permeances, one of the best results reported to date, of 10.1 ± 0.5 L m-2 h-1 bar-1 when filtering sunset yellow and of 9.5 ± 2.1 L m-2 h-1 bar-1 when filtering rose bengal have been achieved in LS-TFN membranes with a rejection higher than 90% in all cases. Methanol permeates through the polyamide and the LS-MIL-101(Cr) monolayer, greatly enhanced by the MOF pore system, in comparison to thin-film composite and conventional TFN membranes (7.5 ± 0.7 and 7.7 ± 1.1 L m-2 h-1 bar-1 when filtering sunset yellow), respectively, in which polyamide areas free of MOF NPs are present.

Mixed Langmuir and Langmuir-Blodgett films of a proton sponge and a fatty acid: influence of the subphase nature on the interactions between the two components.

The H+ acceptor activity of a proton sponge, namely, diphenyl bis(octadecylamino)phosphonium bromide, has been studied at the air-liquid interface using several subphases. Mixed Langmuir and Langmuir-Blodgett (LB) films containing the proton sponge and a fatty acid (behenic acid) in the whole composition range have been prepared. Surface pressure versus area per molecule isotherms were recorded and excess Gibbs energies of mixing calculated. The existence of strong interactions between the proton sponge and the fatty acid is observed when the subphase is either pure water or a NaOH aqueous solution. A stoichiometric 1:1 reaction between both molecules takes place at the air-water interface. This reaction has an efficiency close to 100% at high surface pressures, provided the majority anion present in the subphase is OH-. However, when the majority anion is another one, this complex is hardly formed. From the experimental results, we conclude that the acid-base reaction is highly dependent on the protonation state of the proton sponge at the air-liquid interface that is a function of the present counterion in the subphase. The floating films were also transferred onto solid substrates and characterized by means of IR spectroscopy, atomic force microscopy (AFM), and X-ray diffraction to investigate in more detail the complex formation. The interactions between the complex (when formed) and the excess component have been studied in terms of the subphase nature. It was found that the complex is immiscible with the proton sponge, yielding films made of different domains. Nevertheless, the complex is miscible with the fatty acid when the subphase used is an alkaline solution, presumably due to electrostatic interactions between the carboxylate group of the acid and the complex.

Phase equilibrium of binary mixtures of cyclic ethers + chlorobutane isomers: experimental measurements and SAFT-VR modeling.

The phase equilibria (experimental and modeled) of eight binary mixtures each formed by a cyclic ether (1,3-dioxolane or 1,4-dioxane) and a chlorobutane isomer (1-chlorobutane, 2-chlorobutane, 1-chloro-2-methylpropane, or 2-chloro-2-methylpropane) are presented. New experimental vapor-liquid equilibrium data at isothermal conditions (298.15, 313.15, and 328.15 K) has been obtained, and the statistical associating fluid theory for potentials of variable range (SAFT-VR) is used to model the mixtures. The results are discussed in terms of both the molecular characteristics of the pure compounds and the unlike intermolecular interactions present in the mixtures. The SAFT-VR approach is first used together with standard combining rules without adjustable parameters in order to predict the phase behavior at isothermal conditions. Good agreement between experiment and the prediction is found with such a model. Mean absolute deviations for pressures lie between 1 and 3 kPa, while for vapor phase compositions are less than 0.03 in mole fraction. However, a better agreement, can be obtained by introducing one adjustable parameter kij, which modifies the strength of the dispersion interaction between unlike components in the mixtures. This parameter is adjusted so as to model the phase equilibrium of the whole family of mixtures studied here at isothermal and isobaric conditions. We find that a unique unlike parameter kij is valid for all the studied mixtures and it is not temperature or pressure dependent. This unique transferable parameter together with the SAFT-VR approach provide a description of the vapor-liquid equilibrium of the mixtures that is in excellent agreement with the experimental data. In this case, the absolute deviations are of the order of 0.001 in mole fraction for vapor-phase compositions and less than 1 kPa for pressure.

How exfoliated graphene oxide nanosheets organize at the water interface: evidence for a spontaneous bilayer self-assembly.

In this study, we have characterized graphene oxide films formed at the air-water interface by X-ray reflectivity and grazing incidence X-ray diffraction using synchrotron sources. Surprisingly, the results of both measurements show that at non zero surface pressures, the film is organized as a bilayer of sheets interfaced between air and water with water molecule bridges. Such a spontaneous bilayer structure and its evolution with respect to the surface pressure has been observed for the first time. These results should allow precise control of the density of sheets deposited on the substrate when these films are transferred through the Langmuir Blodgett or Schaefer procedures. Indeed, graphene oxide keeps on attracting more and more attention, increasing the need for the production of well-controlled graphene oxide thin films due to its application in energy devices or in sensor domains.

Ultrathin Composite Polymeric Membranes for CO2 /N2 Separation with Minimum Thickness and High CO2 Permeance.

The use of ultrathin films as selective layers in composite membranes offers significant advantages in gas separation for increasing productivity while reducing the membrane size and energy costs. In this contribution, composite membranes have been obtained by the successive deposition of approximately 1 nm thick monolayers of a polymer of intrinsic microporosity (PIM) on top of dense membranes of the ultra-permeable poly[1-(trimethylsilyl)-1-propyne] (PTMSP). The ultrathin PIM films (30 nm in thickness) demonstrate CO2 permeance up to seven times higher than dense PIM membranes using only 0.04 % of the mass of PIM without a significant decrease in CO2 /N2 selectivity.

Langmuir-Blodgett Films of the Metal-Organic Framework MIL-101(Cr): Preparation, Characterization, and CO2 Adsorption Study Using a QCM-Based Setup.

This work reports the fabrication and characterization of Langmuir-Blodgett films of nanoparticles (size 51 ± 10 nm) of the metal organic framework MIL-101(Cr). LB film characterization by SEM, UV-vis, GIXRD, and QCM has shown that the addition of 1 wt % of behenic acid to MOF dispersion allows obtaining dense monolayers at the air-water interface that can be deposited onto solid substrates of different nature with transfer ratios close to 1. Moreover, a QCM-based setup has been built and used for the first time to measure CO2 adsorption isotherms at 303 K on MOF LB films, proving that LB films with MOF masses between 1.2 (1 layer) and 2.3 (2 layers) µg can be used to obtain accurate adsorption values at 100 kPa, similar to those obtained by conventional adsorption methods that require much larger MOF quantities (tens of milligrams).

Surface behavior of the 1-bromobutane with isomeric butanol mixtures.

Surface tensions of the 1-bromobutane with isomeric butanol mixtures were measured in the temperature range 283.15 K (or 298.15 K for 2-methyl-2-propanol) to 313.15 K with a drop volume tensiometer, and the corresponding surface tension deviations were calculated. Using this information together with bulk thermodynamic properties a thermodynamic study on surface formation was presented. This study includes the calculation of excess surface compositions and excess properties of surface formation.