RESUMO
Designing and evaluating novel dye concepts is crucial for the development of the field of dye-sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti-aggregation additive chenodeoxycholic acid (CDCA) to dyes for DSSC was introduced. Based on the performance improvements seen for this modification, the aim of this study is to see if a simplified anti-aggregation unit could achieve similar results. The following study reports the synthesis and photovoltaic characterization of two novel dyes decorated with the steric ethyladamantyl moiety on the π-spacer, and on the triarylamine donor. This modification is demonstrated to be successful in increasing the photovoltages in devices employing copper-based electrolytes compared to the non-modified reference dye. The best photovoltaic performance is achieved by a device prepared with the adamantyl decorated donor dye and CDCA, this device achieves a power conversion efficiency of 6.1 % (Short-circuit current=8.3â mA cm-2 , Open-circuit voltage=1054â mV, Fill factor=0.69). The improved photovoltaic performance seen for the adamantyl decorated donor demonstrate the potential of ethyladamantyl side chains as a tool to ensure surface protection of TiO2 .
RESUMO
Direct CâH arylation coupling is potentially a more economical and sustainable process than conventional cross-coupling. However, this method has found limited application in the synthesis of organic dyes for dyeâsensitized solar cells. Although direct CâH arylation is not an universal solution to any cross-coupling reactions, it efficiently complements conventional sp2âsp2 bond formation and can provide shorter and more efficient routes to diketopyrrolopyrrole dyes. Here, we have applied palladium catalyzed direct CâH arylation in the synthesis of five new 3,6-dithienyl diketopyrrolopyrrole dyes. All prepared sensitizers display broad absorption from 350 nm up to 800 nm with high molar extinction coefficients. The dyeâsensitized solar cells based on these dyes exhibit a power conversion efficiency in the range of 2.9 to 3.4%.
Assuntos
Corantes/síntese química , Cetonas/síntese química , Pirróis/síntese química , Energia Solar , Catálise , Corantes/química , Humanos , Cetonas/química , Paládio/química , Pirróis/químicaRESUMO
Chlorinated paraffins (CPs) are a notoriously known class of compounds that stand amongst the most wide-spread persistent organic pollutants. Therefore, their reliable, repeatable, and reproducible quantitative analysis using well-defined reference standards is of utmost importance. In view of the increasing demand for constitutionally and stereochemically defined CP standards, we have synthesized a stereoisomeric mixture of 3,4,7,8-tetrachlorodecane. One stereoisomer - (3R,4R,7S,8S)-3,4,7,8-tetrachlorodecane was separated from the mixture, and enriched fractions of residual stereoisomers were achieved through crystallisation of the residual mother liquors. The molecular structure of the single isolated stereoisomer was confirmed through single-crystal X-ray crystallographic data. One fraction of 3,4,7,8-tetrachlorodecane stereoisomers was successfully separated on a chiral stationary phase using supercritical fluid chromatography hyphenated to mass spectrometry (column: Chiral ART Amylose-C; mobile phase: CO2/MeOH (96/4 v/v) with 0.1% diethylamine). The reported separation of stereoisomers is unprecedented in CP analysis so far.
RESUMO
A new simple method for chlorine percentage calculations (method C), from proton nuclear magnetic resonance (1H NMR) spectroscopy, has been established and applied to an industrial chlorinated paraffin (CP) mixture and 13 single-chain CPs of known carbon chain lengths. Two modified methods (method A and B), originating from the work of Sprengel et al., have been utilized on the same single-chain mixtures. All samples were analysed by 1H NMR and two-dimensional heteronuclear quantum coherence (HSQC) for this purpose. All three methods worked well for medium chlorinated (45-55% Cl) single-chain mixtures of known carbon chain lengths. Method A yielded the best result for mixtures of lower chlorine content (<45% Cl), method C gave better estimations for higher chlorine contents (>55% Cl). Compared to Mohr's titration, method A showed a deviation of 0.7-7.8% (3.6% average), method B 4.1-11.3% (7.0% average) and method C 0.6-11.6% (5.2% average), for all 13 single-chain mixtures. The new method C is the only method that could be applied for determining the chlorine percentage of industrial mixtures of multiple, unknown chain lengths.
Assuntos
Hidrocarbonetos Clorados , Parafina , Carbono/análise , China , Cloro/química , Monitoramento Ambiental , Hidrocarbonetos Clorados/análise , Espectroscopia de Ressonância Magnética , Parafina/análise , PrótonsRESUMO
The geometry of a dye for dye-sensitized solar cells (DSSCs) has a major impact on its optical and electronic properties. The dye structure also dictates the packing properties and how well the dye insulates the metal-oxide surface from oxidants in the electrolyte. The aim of this work is to investigate the effect of planarizing the geometry of the common triarylamine donor, frequently used in dyes for DSSC. Five novel dyes were designed and prepared; two employ conventional triarylamine donors with thiophene and furan π-spacers, two dyes have had their donors planarized through one sulfur bridge (making two distinct phenothiazine motifs), and the final dye has been planarized by forming a double phenoxazine. The synthesis of these model dyes proved to be quite challenging, and each required specially designed total syntheses. We demonstrate that the planarization of the triarylamine donor can have different effects. When planarization was achieved by a 3,7-phenothiazine and double phenoxazine structures, improved absorption properties were noted, and a panchromatic absorption was achieved by the latter. However, an incorrect linking of donor and acceptor moieties has the opposite effect. Further, electrochemical impedance spectroscopy revealed clear differences in charge recombination depending on the structure of the dye. A drawback of planarized dyes in relation to DSSC is their low oxidation potentials. The best photovoltaic performance was achieved by 3,7-phenothazine with furan as a π-spacer, which produces a power conversion efficiency of 5.2% (J sc = 8.8 mA cm-2, V oc = 838 mV, FF = 0.70).
RESUMO
We report the synthesis and properties of temperature- and pH-responsive p([NIPAm-co-PEGMA] (core)/[NIPAm-co-AAc] (shell)) nanogels with narrow size distributions, tunable sizes and increased drug loading efficiencies. The core-shell nanogels were synthesized using an optimized two-stage seeded polymerization methodology. The core-shell nanogels show a narrow size distribution and controllable physico-chemical properties. The hydrodynamic sizes, charge distributions, temperature-induced volume phase transition behaviors, pH-responsive behaviors and drug loading capabilities of the core-shell nanogels were investigated using transmission electron microscopy, zeta potential measurements, dynamic light scattering and UV-Vis spectroscopy. The size of the core-shell nanogels was controlled by polymerizing NIPAm with crosslinker poly(ethylene glycol) dimethacrylate (PEGDMA) of different molecular weights (Mn-200, 400, 550 and 750 g/mol) during the core synthesis. It was found that the swelling/deswelling kinetics of the nanogels was sharp and reversible; with its volume phase transition temperature in the range of 40â»42 °C. Furthermore, the nanogels loaded with l-3,4-dihydroxyphenylalanine (L-DOPA), using a modified breathing-in mechanism, showed high loading and encapsulation efficiencies, providing potential possibilities of such nanogels for biomedical applications.