Kinked Silicon Nanowires: Superstructures by Metal-Assisted Chemical Etching.

We report on metal-assisted chemical etching of Si for the synthesis of mechanically stable, hybrid crystallographic orientation Si superstructures with high aspect ratio, above 200. This method sustains high etching rates and facilitates reproducible results. The protocol enables the control of the number, angle, and location of the kinks via successive etch-quench sequences. We analyzed relevant Au mask catalyst features to systematically assess their impact on a wide spectrum of etched morphologies that can be easily attained and customized by fine-tuning of the critical etching parameters. For instance, the designed kinked Si nanowires can be incorporated in biological cells without affecting their viability. An accessible numerical model is provided to explain the etch profiles and the physicochemical events at the Si/Au-electrolyte interface and offers guidelines for the development of finite-element modeling of metal-assisted Si chemical etching.

Synthesis and characterisation of redox hydrogels based on stable nitroxide radicals.

The principle of encapsulation/release of a guest molecule from stimuli responsive hydrogels (SRHs) is mainly realised with pH, temperature or light stimuli. However, only a limited number of redox responsive hydrogels have been investigated so far. We report here the development of a SRH that can release its guest molecule upon a redox stimulus. To obtain this redox hydrogel, we have introduced into the hydrogel the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) stable nitroxide radical, which can be reversibly oxidized into an oxoammonium cation (TEMPO+). Water solubility is provided by the presence of the (oligoethyleneglycol)methacrylate (OEGMA) comonomer. Electrochemical and mechanical characterization showed that those gels exhibit interesting physicochemical properties, making them very promising candidates for practical use in a wide range of applications.

Closer insight into the structure of moderate to densely branched comb polymers by combining modelling and linear rheological measurements.

Synthesis of combs with well-entangled backbones and long branches with high densities has always been a challenge. Steric hindrance frequently leads to coupling of chains and structural imperfections that cannot be easily distinguished by traditional characterization methods. Research studies have therefore tried to use a combination of different methods to obtain more information on the actual microstructures. In this work, a grafting-from approach is used to synthesize poly(n-butyl acrylate) combs using atom transfer radical polymerization (ATRP) in three steps including the synthesis of a backbone, cleavage of protecting groups and growth of side branches. We have compared the linear viscoelastic properties theoretically predicted by a time marching algorithm (TMA) tube based model with the measured rheological behaviour to provide a better insight into the actual microstructure formed during synthesis. For combs with branches smaller than an entanglement, no discernible hierarchical relaxation can be distinguished, while for those with longer branches, a high frequency plateau made by entangled branches can be separated from backbone's relaxation. Dilution of the backbone, after relaxation of side branches, may accelerate the final relaxation, while extra friction can delay it especially for longer branches. Such a comparison provides a better assessment of the microstructure formed in combs.

Synthesis and self-assembly of terpyridine end-capped poly(N-isopropylacrylamide)-block-poly(2-(dimethylamino)ethyl methacrylate) diblock copolymers.

At the basis of smart self-assembled materials are lying small building blocks that can hierarchically assemble in response to stimuli, e.g., temperature or chemical species. In this context, the synthesis of terpyridine end-capped poly(2-(dimethylamino)ethyl methacrylate)-block-poly(N-isopropylacrylamide) diblock copolymers via controlled radical copolymerization is reported here. The self-assembly of those copolymers is investigated in dilute aqueous solutions while varying temperature or adding transition metal ions, respectively, leading to the formation of micellar nanostructures or metallosupramolecular triblock copolymers.

Roll up nanowire battery from silicon chips.

Here we report an approach to roll out Li-ion battery components from silicon chips by a continuous and repeatable etch-infiltrate-peel cycle. Vertically aligned silicon nanowires etched from recycled silicon wafers are captured in a polymer matrix that operates as Li(+) gel-electrolyte and electrode separator and peeled off to make multiple battery devices out of a single wafer. Porous, electrically interconnected copper nanoshells are conformally deposited around the silicon nanowires to stabilize the electrodes over extended cycles and provide efficient current collection. Using the above developed process we demonstrate an operational full cell 3.4 V lithium-polymer silicon nanowire (LIPOSIL) battery which is mechanically flexible and scalable to large dimensions.

Revealing the supramolecular nature of side-chain terpyridine-functionalized polymer networks.

Nowadays, finely controlling the mechanical properties of polymeric materials is possible by incorporating supramolecular motifs into their architecture. In this context, the synthesis of a side-chain terpyridine-functionalized poly(2-(dimethylamino)ethyl methacrylate) is reported via reversible addition-fragmentation chain transfer polymerization. By addition of transition metal ions, concentrated aqueous solutions of this polymer turn into metallo-supramolecular hydrogels whose dynamic mechanical properties are investigated by rotational rheometry. Hence, the possibility for the material to relax mechanical constrains via dissociation of transient cross-links is brought into light. In addition, the complex phenomena occurring under large oscillatory shear are interpreted in the context of transient networks.

Self-assembling doxorubicin-tocopherol succinate prodrug as a new drug delivery system: synthesis, characterization, and in vitro and in vivo anticancer activity.

Self-assembled prodrugs forming nanoaggregates are a promising approach to enhance the antitumor efficacy and to reduce the toxicity of anticancer drugs. To achieve this goal, doxorubicin was chemically conjugated to d-α-tocopherol succinate through an amide bond to form N-doxorubicin-α-d-tocopherol succinate (N-DOX-TOS). The prodrug self-assembled in water into 250 nm nanostructures when stabilized with d-α-tocopherol poly(ethylene glycol) 2000 succinate. Cryo-TEM analysis revealed the formation of nanoparticles with a highly ordered lamellar inner structure. NMR spectra of the N-DOX-TOS nanoparticles indicated that N-DOX-TOS is located in the core of the nanoparticles while PEG chains and part of the tocopherol are in the corona. High drug loading (34% w/w) and low in vitro drug release were achieved. In vitro biological assessment showed significant anticancer activity and temperature-dependent cellular uptake of N-DOX-TOS nanoparticles. In vivo, these nanoparticles showed a greater antitumor efficacy than free DOX. N-DOX-TOS nanoparticles might have the potential to improve DOX-based chemotherapy.

Thermo-responsive properties of metallo-supramolecular block copolymer micellar hydrogels.

Metallo-supramolecular micellar hydrogels exhibiting thermo-mechanical responsiveness are prepared through the hierarchical assembly of a heterotelechelic associating copolymer. The copolymer consists of a linear thermo-sensitive water-soluble sequence terminated by a short hydrophobic sticker at one end, the other being functionalized by a chelating ligand. As the first level of assembly, the associating copolymer is dissolved in aqueous solution to yield micellar nanostructures, bearing coordinative motifs at the end of the coronal chains. The second level of assembly is achieved when transition metal ions are added to the micellar solutions, resulting in almost instantaneous gelation. The thermo-mechanical response of those materials is investigated in detail by rotational rheometry, showing abrupt changes within the temperature boundaries corresponding to the phase transition of the polymer block located in the micellar corona.

Micellar cathodes from self-assembled nitroxide-containing block copolymers in battery electrolytes.

This contribution describes the synthesis of block copolymers containing electrochemically active blocks, their micellization, and finally their use as micellar cathodes in a lithium battery. The self-assembly of the synthesized poly(styrene)-block-poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PS-b-PTMA) diblock copolymers is realized in a typical battery electrolyte made of 1 m lithium trifluoromethanesulfonate dissolved in a mixture of ethylene carbonate/diethyl carbonate/dimethyl carbonate(1:1:1, in volume). Dynamic light scattering and atomic force micro-scopy indicate the formation of well-defined spherical micelles with a PS core and a PTMA corona. The electrochemical properties of those micelles are further investigated. Cyclic voltammograms show a reversible redox reaction at 3.6 V (vs Li(+) /Li). The charge/discharge profiles indicate a flat and reversible plateau around 3.6 V (vs Li(+) /Li). Finally, the cycling performances of the micellar cathodes are demonstrated. Such self-assembled block copolymers open new opportunities for nanostructured organic radical batteries.

Photo-responsive block copolymer micelles: design and behavior.

Stimuli-responsive block copolymer micelles are the topic of intense research since they are able to show sharp and eventually reversible responses to various environmental changes and find applications in various fields including controlled drug delivery. Among all the available stimuli, light has recently attracted much attention since it can be localized in time and space, and it can also be triggered from outside of the system. In this tutorial review, we highlight the progress realized in recent years. More precisely, we provide some guidelines towards the rational design of photo-responsive block copolymers and we present the different photo-responsive moieties that have been used so far. We also discuss the different types of irreversible and reversible responses encountered by photo-responsive block copolymer micelles. Finally, we suggest possible future developments including the design of biocompatible systems operating at excitation wavelengths compatible for biomedical applications.

Solid Polymer Electrolytes with Sacrificial End Groups for a Wide Oxidative Potential and Stable Interface in Lithium Metal Batteries.

Poly(ethylene glycol) (PEG), despite being the most studied polymer electrolyte, suffers from serious drawbacks, which require fundamental studies behind its underperformance in lithium batteries. Here, we report the effect of the terminal group on triarm PEG stars bearing either hydroxyl (TPEG-OH) or carbonate-ketone (TPEG-Carb-ket) terminal groups. The latter is synthesized by a ring-opening reaction triggered by the -OH end group of TPEG-OH and results in a carbonate-ketone functionality. Indeed, the modified chain end is found to act as a sacrificial group by focusing the reactivity of the chain on the terminal group, protecting the rest of the TPEG molecule, which significantly reduces interfacial degradation and achieves a broader electrochemical stability window of up to 4.47 V, high Coulombic efficiency, and capacity retention. It furthermore demonstrates a stable interface with lithium metal after more than 1200 h of stripping and plating. When those electrolytes are investigated in reference cells based on LiFePO4 cathodes and Li anodes, the change in discharge capacity is observed from 118.7 to 113.8 and 108.9 to 5.03 mAh g-1 for TPEG-Carb-ket and TPEG-OH electrolytes, respectively, from the 1st to 100th cycle. The experimental results are further supported by density functional theory calculations and ab initio molecular dynamics simulations.

Dynamic Covalent Amphiphilic Polymer Conetworks Based on End-Linked Pluronic F108: Preparation, Characterization, and Evaluation as Matrices for Gel Polymer Electrolytes.

We present the development of a platform of well-defined, dynamic covalent amphiphilic polymer conetworks (APCN) based on an α,ω-dibenzaldehyde end-functionalized linear amphiphilic poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEG-b-PPG-b-PEG, Pluronic) copolymer end-linked with a triacylhydrazide oligo(ethylene glycol) triarmed star cross-linker. The developed APCNs were characterized in terms of their rheological (increase in the storage modulus by a factor of 2 with increase in temperature from 10 to 50 °C), self-healing, self-assembling, and mechanical properties and evaluated as a matrix for gel polymer electrolytes (GPEs) in both the stretched and unstretched states. Our results show that water-loaded APCNs almost completely self-mend, self-organize at room temperature into a body-centered cubic structure with long-range order exhibiting an aggregation number of around 80, and display an exceptional room temperature stretchability of ∼2400%. Furthermore, ionic liquid-loaded APCNs could serve as gel polymer electrolytes (GPEs), displaying a substantial ion conductivity in the unstretched state, which was gradually reduced upon elongation up to a strain of 4, above which it gradually increased. Finally, it was found that recycled (dissolved and re-formed) ionic liquid-loaded APCNs could be reused as GPEs preserving 50-70% of their original ion conductivity.

Ultrathin NiO nanosheets anchored to a nitrogen-doped dodecahedral carbon framework for aqueous potassium-ion hybrid capacitors.

Hierarchical porous structures and well-modulated interfacial interactions are essential for the performance of electrode materials. The energy storage performance can be promoted by regulating the diffusion behavior of the electrolyte and constructing a coupled interaction at heterogeneous interfaces. Herein, we have synthesized ultrathin NiO nanosheets anchored to nitrogen-doped hierarchical porous carbon (NiO/N-HPC) and applied it to construct aqueous potassium ion hybrid capacitors (APIHCs). The abundant and interconnected porous architecture promotes electrolyte penetration/diffusion and shortens the ion transport path, thereby accelerating storage reaction kinetics. The nitrogen-doped carbon support can achieve optimized metal oxides-carbon interaction and enhance the adsorption ability for the electrolyte ions, leading to earning higher storage capacity. Consequently, the prepared NiO/N-HPC exhibits a superior capacitance of 126.4 F g-1 at a current density of 0.5 A g-1, and the as-fabricated NiO/N-HPC//N-HPC APIHC achieves an ultra-high capacitance retention of 91.6% over 8000 cycles at a current density of 2 A g-1. Meanwhile, the APIHC device shows an excellent energy density of 21.95 W h kg-1 and a power density of 9000 W kg-1.

Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries.

Prussian blue analogues (PBAs) are considered to be one of the most suitable sodium storage materials, especially with the introduction of the high-entropy (HE) concept into their structure to further improve their various abilities. However, severe agglomeration of the HEPBA particles still limits the fast charging capabilities. Here, an HEPBA (Nax(FeMnCoNiCu)[Fe(CN)6]y□1-y·nH2O) with a hollow stair-stepping spherical structure has been prepared through the chemical etching process of the traditional cubic structure of HEPBA. Electrochemical characterization (sodium ion battery), kinetic analysis, and COMSOL Multiphysics simulations reveal that the nature of the high-entropy and the hollow stair-stepping spherical structure can greatly improve the diffusion behavior of Na+ ions. Moreover, the hollow structure effectively mitigates the volume change of HEPBA during SIBs operation, ultimately extending the lifespan. Consequently, the as-prepared HEPBA cathode exhibits excellent rate performance (126.5 and 76.4 mAh g-1 at 0.1 and 4.0 A g-1, respectively) and stable long-term capability (maintaining its 75.6% capacity after 1000 cycles) due to its unique structure. Furthermore, the waste of the etching process can easily be recycled to prepare more HEPBA product. This processing method holds great promise for designing nanostructures of advanced high-entropy Prussian blue analogues for sodium ion batteries.

A dicarbonate solvent electrolyte for high performance 5 V-Class Lithium-based batteries.

Rechargeable lithium batteries using 5 V positive electrode materials can deliver considerably higher energy density as compared to state-of-the-art lithium-ion batteries. However, their development remains plagued by the lack of electrolytes with concurrent anodic stability and Li metal compatibility. Here we report a new electrolyte based on dimethyl 2,5-dioxahexanedioate solvent for 5 V-class batteries. Benefiting from the particular chemical structure, weak interaction with lithium cation and resultant peculiar solvation structure, the resulting electrolyte not only enables stable, dendrite-free lithium plating-stripping, but also displays anodic stability up to 5.2 V (vs. Li/Li+), in additive or co-solvent-free formulation, and at low salt concentration of 1 M. Consequently, the Li | |LiNi0.5Mn1.5O4 cells using the 1 M LiPF6 in 2,5-dioxahexanedioate based electrolyte retain >97% of the initial capacity after 250 cycles, outperforming the conventional carbonate-based electrolyte formulations, making this, and potentially other dicarbonate solvents promising for future Lithium-based battery practical explorations.

Design Principles of Quinone Redox Systems for Advanced Sulfide Solid-State Organic Lithium Metal Batteries.

The emergence of solid-state battery technology presents a potential solution to the dissolution challenges of high-capacity small molecule quinone redox systems. Nonetheless, the successful integration of argyrodite-type Li6PS5Cl, the most promising solid-state electrolyte system, and quinone redox systems remains elusive due to their inherent reactivity. Here, a library of quinone derivatives is selected as model electrode materials to ascertain the critical descriptors governing the (electro)chemical compatibility and subsequently the performances of Li6PS5Cl-based solid-state organic lithium metal batteries (LMBs). Compatibility is attained if the lowest unoccupied molecular orbital level of the quinone derivative is sufficiently higher than the highest occupied molecular orbital level of Li6PS5Cl. The energy difference is demonstrated to be critical in ensuring chemical compatibility during composite electrode preparation and enable high-efficiency operation of solid-state organic LMBs. Considering these findings, a general principle is proposed for the selection of quinone derivatives to be integrated with Li6PS5Cl, and two solid-state organic LMBs, based on 2,5-diamino-1,4-benzoquinone and 2,3,5,6-tetraamino-1,4-benzoquinone, are successfully developed and tested for the first time. Validating critical factors for the design of organic battery electrode materials is expected to pave the way for advancing the development of high-efficiency and long cycle life solid-state organic batteries based on sulfides electrolytes.

Pore-functionalized nanoporous materials derived from block copolymers.

This review deals with nanoporous materials made from the self-assembly of block copolymers with a special interest in the chemical functions covering the surface of their nanopores. A detailed overview of the existing methods and strategies to generate well-defined organic functional groups covering the surface of the pore walls is provided. This further enables to finely tune the affinity of the pore walls and to perform well-defined chemical reactions onto them, which is essential for further dedicated applications.

Practical Cell Design for PTMA-Based Organic Batteries: an Experimental and Modeling Study.

Poly(2,2,6,6-tetramethyl-1-piperidinyloxy methacrylate) (PTMA) is one of the most promising organic cathode materials thanks to its relatively high redox potential, good rate performance, and cycling stability. However, being a p-type material, PTMA-based batteries pose additional challenges compared to conventional lithium-ion systems due to the involvement of anions in the redox process. This study presents a comprehensive approach to optimize such batteries, addressing challenges in electrode design, scalability, and cost. Experimental results at a laboratory scale demonstrate high active mass loadings of PTMA electrodes (up to 9.65 mg cm-2), achieving theoretical areal capacities that exceed 1 mAh cm-2. Detailed physics-based simulations and cost and performance analysis clarify the critical role of the electrolyte and the impact of the anion amount in the PTMA redox process, highlighting the benefits and the drawbacks of using highly concentrated electrolytes. The cost and energy density of lithium metal batteries with such high mass loading PTMA cathodes were simulated, finding that their performance is inferior to batteries based on inorganic cathodes even in the most optimistic conditions. In general, this work emphasizes the importance of considering a broader perspective beyond the lab scale and highlights the challenges in upscaling to realistic battery configurations.

Chameleon Multienvironment Nanoreactors.

Nanoreactors consisting of hydrophilic porous SiO2 shells and amphiphilic copolymer cores have been prepared, which can easily self-tune their hydrophilic/hydrophobic balance depending on the environment and exhibit chameleon-like behavior. The accordingly obtained nanoparticles show excellent colloidal stability in a variety of solvents with different polarity. Most importantly, thanks to the assistance of the nitroxide radicals attached to the amphiphilic copolymers, the synthesized nanoreactors show high catalytic activity for model reactions in both polar and nonpolar environments and, more particularly, realize a high selectivity for the products resulting from the oxidation of benzyl alcohol in toluene.

Revealing the reversible solid-state electrochemistry of lithium-containing conjugated oximates for organic batteries.

In the rising advent of organic Li-ion positive electrode materials with increased energy content, chemistries with high redox potential and intrinsic oxidation stability remain a challenge. Here, we report the solid-phase reversible electrochemistry of the oximate organic redox functionality. The disclosed oximate chemistries, including cyclic, acyclic, aliphatic, and tetra-functional stereotypes, uncover the complex interplay between the molecular structure and the electroactivity. Among the exotic features, the most appealing one is the reversible electrochemical polymerization accompanying the charge storage process in solid phase, through intermolecular azodioxy bond coupling. The best-performing oximate delivers a high reversible capacity of 350 mAh g-1 at an average potential of 3.0 versus Li+/Li0, attaining 1 kWh kg-1 specific energy content at the material level metric. This work ascertains a strong link between electrochemistry, organic chemistry, and battery science by emphasizing on how different phases, mechanisms, and performances can be accessed using a single chemical functionality.