Continuous tuning of pulse parameters in a soliton fiber laser by adjusting the effect of nonlinear polarization rotation: publisher's note.

This publisher's note contains a correction to Opt. Lett.49, 674 (2024)10.1364/OL.509981.

Continuous tuning of pulse parameters in a soliton fiber laser by adjusting the effect of nonlinear polarization rotation.

We demonstrate that through inserting a short length of highly birefringent small-core photonic crystal fiber (Hi-Bi SC-PCF) into a soliton fiber laser, the nonlinear polarization rotation effect in this laser can be manipulated, leading to continuous tuning of the output pulse parameters. In experiments, we observed that by adjusting the polarization state of light launched into the Hi-Bi SC-PCF and varying the cavity attenuation, the laser spectral width can be continuously tuned from ∼7.1 to ∼1.7 nm, corresponding to a pulse-width-tuning range from ∼350 fs to ∼1.56 ps. During the parameter tuning, the output pulses strictly follow the soliton area theory, giving an almost constant time-bandwidth-product of ∼0.31. This soliton fiber laser, being capable of continuous parameter tuning, could be applied as the seed source in ultrafast laser systems and may find some applications in nonlinear-optics and soliton-dynamics experiments.

Efficient removal of Cd2+ by diatom frustules self-modified in situ with intercellular organic components.

The organic modification of three-dimensional porous diatom frustules (biosilica) and their fossils (diatomite) is promising in heavy metal adsorption. However, the preparation of such materials involves complex processes, high costs, and environmental hazards. In this study, organic-biosilica composites based on in situ self-modification of diatoms were prepared by freeze-drying pretreatment. Freeze-drying resulted in the release of the intercellular organic components of diatoms, followed by loading on the surface of their diatom frustules. The bio-adsorbent exhibits outstanding Cd2+ adsorption capacity (up to 220.3 mg/g). The adsorption isotherms fitted the Langmuir model and the maximum adsorption capacity was 4 times greater than that of diatom biosilica (54.1 mg/g). The adsorption kinetics of Cd2+ was adequately described by a pseudo-second-order model and reached equilibrium within 30 min. By combining focused ion beam thinning with transmission electron microscopy-energy dispersive X-ray spectroscopy, the internal structure of the composite and the Cd2+ distribution were investigated. The results showed that the organic matter of the composite adsorbed approximately 10 times more Cd2+ than inorganic biosilica. The adsorption mechanism was dominated by complexation between the abundant organic functional groups (amide, carboxyl, and amino groups) on the surfaces of composite and Cd2+. The bio-adsorbent was demonstrated to have wide applicability in the presence of competitive cations (Na+, K+, Ca2+, and Mg2+) and under a wide range of pH (3-10) conditions. Thus, the self-modification of diatoms offers a promising organic-inorganic composite for heavy metal remediation.

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature.

Calcium carbide residue (CCR) is a solid waste resulting from acetylene gas production. In this study, CCR was used as an alkali activator to prepare fly ash (FA)-based geopolymers without any alkali supplementation. We studied the factors (FA/CCR ratio, curing temperature, and water/binder ratio) influencing the mechanical property of FA/CCR-based geopolymers. The compressive strength results showed that, by optimizing these three factors, the FA/CCR mixture has great potential for use as a cementitious material and geopolymer with a dense microstructure having a maximal compressive strength of 17.5 MPa. The geopolymers' chemical structure, microstructure, and chemical composition were characterized and determined by a combination of techniques. All these results revealed that amorphous C-(A)-S-H (calcium (aluminate) silicate hydrate) gels mainly formed after geopolymerization resulting from the reaction of FA and CCR. In addition, some crystallines, such as ettringite and monosulfate, were also formed. Further, geopolymers prepared with a suitable FA/CCR ratio (1:1 or 1:2) possessed a compact microstructure because of their sufficient reactive SiO2 and Al2O3 and high-enough alkalinity, responsible for higher content of C-(A)-S-H formation and better mechanical property. Too high curing temperature or water content induced the formation of a loosely bound geopolymer matrix that strongly weakens its mechanical property.

Lake sedimentary biogenic silica from diatoms constitutes a significant global sink for aluminium.

Diatoms play an important role in marine biogeochemical cycle of aluminum (Al), as dissolved Al is taken up by diatoms to build their siliceous frustules and is involved in the sedimentation of diatomaceous biogenic silica (BSi). The Al incorporation in BSi facilitates decreasing the dissolution of marine BSi and thus substantially influences the biochemical processes driven by diatoms, such as CO2 sequestration. However, the role of lake BSi in the terrestrial biochemical Al cycle has not been explored, though lakes represent the second-largest sink for BSi. By identifying the previously unexplored high Al/Si atomic ratios (up to 0.052) in lake BSi, here we show lake BSi is a large terrestrial Al pool due to its high Al content, and lake sedimentary BSi constitutes a significant global sink for Al, which is on the same magnitude as the Al sink in global oceans.