RESUMO
The uncontrollable growth of lithium dendrites and the flammability of electrolytes are the direct impediments to the commercial application of high-energy-density lithium metal batteries (LMBs). Herein, this study presents a novel approach that combines microencapsulation and electrospinning technologies to develop a multifunctional composite separator (P@AS) for improving the electrochemical performance and safety performance of LMBs. The P@AS separator forms a dense charcoal layer through the condensed-phase flame retardant mechanism causing the internal separator to suffocate from lack of oxygen. Furthermore, it incorporates a triple strategy promoting the uniform flow of lithium ions, facilitating the formation of a highly ion-conducting solid electrolyte interface (SEI), and encouraging flattened lithium deposition with active SiO2 seed points, considerably suppressing lithium dendrites growth. The high Coulombic efficiency of 95.27% is achieved in Li-Cu cells with additive-free carbonate electrolyte. Additionally, stable cycling performance is also maintained with a capacity retention rate of 93.56% after 300 cycles in LFP//Li cells. Importantly, utilizing P@AS separator delays the ignition of pouch batteries under continuous external heating by 138 s, causing a remarkable reduction in peak heat release rate and total heat release by 23.85% and 27.61%, respectively, substantially improving the fire safety of LMBs.
RESUMO
The poly(ethylene oxide) solid polymer electrolyte (PEO SPE) has recently received much attention, however, the organic components in the SPE are still flammable. In this paper, we find that the high efficiency halogen-free aluminum (Al) diethyl hypophosphite flame retardant (ADP) is effective in reducing the flammability of PEO SPE. The SEI layer containing Al and phosphorus (P) inhibits the growth of lithium dendrite and enhances the cycle life of the battery. The capacity of a LiFePO4/SPE/Li battery containing ADP is still 123.2 mAh g-1 at 1.0 C and the Coulombic efficiency is as high as 99.95% after 1000 cycles (60 °C). At the same time, Al, P-rich SEI can inhibit the growth of lithium dendrite and the cycle stability of the battery is further enhanced.
RESUMO
Stream losses are extensively observed due to human activities in the world, and the patterns of stream loss vary in different land use types. However, relationship between stream loss pattern and land use covers is poorly understood. We select the lower Taihu watershed (LTWS) within Yangtze River Delta (YRD), which is dominated by agricultural and urban covers and a typical case of most urbanized watersheds in China. In this study, we measured the stream loss of LTWS from 1960s to 2010s and investigated its relation to different land use covers and impervious area percentage (IAP) in order to figure out the main factor of stream loss in this area. The results show that urban area has tripled with fractional contribution from 10.3% to 33.18% in the form of conversion from agriculture to urban area during 1990-2015. 12.5% of all the streams are lost and 1st-order streams contribute most (91.8%) to the total stream loss. Urban cover contribute most (76%) to total streams loss compared to other land use types. We find that 1st-order streams have highest stream loss intensity, which is mainly caused by urban expansion, but preferred protections are given to highest-order streams. The linear model of correlation of pixel-level streams loss and IAP shows that the streams loss is statistically significant positive with IAP of cells (R2â¯=â¯0.91). Tradeoffs between city expansion and river network make small channels sacrifice for the urbanization. Urgent measures including legislation must be taken to protect small streams during urbanization nowadays and in future.
Assuntos
Agricultura , Rios , China , Cidades , UrbanizaçãoRESUMO
Water quality in wetlands plays a huge role in maintaining the health of the wetland ecosystem. Water quality should be controlled by an appropriate water allocation policy for the protection of the wetlands. In this paper, models of rainfall/runoff, non-point source pollution load, water quantity/quality, and dynamic pollutant-carrying capacity were established to simulate the water quantity/quality of Xixi-wetland river network (in the Taihu basin, China). The simulation results showed a satisfactory agreement with field observations. Furthermore, a 'node-river-node' algorithm that adjusts to the 'Three Steps Method' was adopted to improve the dynamic pollutant-carrying capacity model and simulate the pollutant-carrying capacity in benchmark years. The simulation result shows that the water quality of the river network could reach class III stably all year round if the anthropogenic pollution is reduced to one-third of the current annual amount. Further investigation estimated the minimum amount of water diversion in benchmark years under the reasonable water quantity-regulating rule to keep water quality as class III. With comparison of the designed scale, the water diversion can be reduced by 184 million m3 for a dry year, 191 million m3 for a normal year, and 198 million m3 for a wet year.
Assuntos
Modelos Teóricos , Qualidade da Água , Recursos Hídricos , Áreas Alagadas , Algoritmos , China , Simulação por Computador , Conservação dos Recursos Naturais/métodos , Ecossistema , Chuva , Rios , Poluição da ÁguaRESUMO
Further understanding the mechanisms of landscape-water interactions is of great importance to water quality management in the Xitiaoxi catchment. Pearson's correlation analysis, stepwise multiple regression and redundancy analysis were adopted in this study to investigate the relation between water quality and landscape at the sub-catchment and 200 m riparian zone scales during dry and wet seasons. Landscape was characterized by natural environmental factors, land use patterns and four selected landscape configuration metrics. The obtained results indicated that land use categories of urban and forest were dominant landscape attributes, which influenced water quality. Natural environment and landscape configuration were overwhelmed due to land management activities and hydrologic conditions. In general, the landscape of the 200 m riparian zone appeared to have slightly greater influence on water than did the sub-catchment, and water quality was slightly better explained by all landscape attributes in the wet season than in the dry season. The results suggested that management efforts aimed at maintaining and restoring river water quality should currently focus on the protection of riparian zones and the development of an updated long-term continuous data set and higher resolution digital maps to discuss the minimum width of the riparian zone necessary to protect water quality.
Assuntos
Meio Ambiente , Rios/química , Estações do Ano , Qualidade da Água , China , Geografia , Análise MultivariadaRESUMO
Stream structure is usually dominated by various human activities over a short term. An analysis of variation in stream structure from 1979 to 2009 in the Qinhuai River Basin, China, was performed based on remote sensing images and topographic maps by using ArcGIS. A series of river parameters derived from river geomorphology are listed to describe the status of river structure in the past and present. Results showed that urbanization caused a huge increase in the impervious area. The number of rivers in the study area has decreased and length of rivers has shortened. Over the 30 years, there was a 41.03% decrease in river length. Complexity and stability of streams have also changed and consequently the storage capacities of river channels in intensively urbanized areas are much lower than in moderately urbanized areas, indicating a greater risk of floods. Therefore, more attention should be paid to the urban disturbance to rivers.
Assuntos
Rios , Urbanização , China , InundaçõesRESUMO
Previous knowledge distillation (KD) methods mostly focus on compressing network architectures, which is not thorough enough in deployment as some costs like transmission bandwidth and imaging equipment are related to the image size. Therefore, we propose Pixel Distillation that extends knowledge distillation into the input level while simultaneously breaking architecture constraints. Such a scheme can achieve flexible cost control for deployment, as it allows the system to adjust both network architecture and image quality according to the overall requirement of resources. Specifically, we first propose an input spatial representation distillation (ISRD) mechanism to transfer spatial knowledge from large images to student's input module, which can facilitate stable knowledge transfer between CNN and ViT. Then, a Teacher-Assistant-Student (TAS) framework is further established to disentangle pixel distillation into the model compression stage and input compression stage, which significantly reduces the overall complexity of pixel distillation and the difficulty of distilling intermediate knowledge. Finally, we adapt pixel distillation to object detection via an aligned feature for preservation (AFP) strategy for TAS, which aligns output dimensions of detectors at each stage by manipulating features and anchors of the assistant. Comprehensive experiments on image classification and object detection demonstrate the effectiveness of our method.
RESUMO
Nuclei detection is one of the most fundamental and challenging problems in histopathological image analysis, which can localize nuclei to provide effective computer-aided cancer diagnosis, treatment decision, and prognosis. The fully-supervised nuclei detector requires a large number of nuclei annotations on high-resolution digital images, which is time-consuming and needs human annotators with professional knowledge. In recent years, weakly-supervised learning has attracted significant attention in reducing the labeling burden. However, detecting dense nuclei of complex crowded distribution and diverse appearances remains a challenge. To solve this problem, we propose a novel point-supervised dense nuclei detection framework that introduces position-based anchor optimization to complete morphology-based pseudo-label supervision. Specifically, we first generate cellular-level pseudo labels (CPL) for the detection head via a morphology-based mechanism, which can help to build a baseline point-supervised detection network. Then, considering the crowded distribution of the dense nuclei, we propose a mechanism called Position-based Anchor-quality Estimation (PAE), which utilizes the positional deviation between an anchor and its corresponding point label to suppress low-quality detections far from each nucleus. Finally, to better handle the diverse appearances of nuclei, an Adaptive Anchor Selector (AAS) operation is proposed to automatically select positive and negative anchors according to morphological and positional statistical characteristics of nuclei. We conduct comprehensive experiments on two widely used benchmarks, MO and Lizard, using ResNet50 and PVTv2 as backbones. The results demonstrate that the proposed approach has superior capacity compared with other state-of-the-art methods. In particularly, in dense nuclei scenarios, our method can achieve 95.1% performance of the fully-supervised approach. The code is available at https://github.com/NucleiDet/DenseNucleiDet.
Assuntos
Benchmarking , Diagnóstico por Computador , Humanos , Processamento de Imagem Assistida por Computador , Conhecimento , Aprendizado de Máquina SupervisionadoRESUMO
Objective: To investigate the impact of the bone mass and volume of the low-density area under the tibial plateau on the lower limb force line by finite element analysis, offering mechanical evidence for preventing internal displacement of the lower limb force line in conjunction with knee varus in patients with knee osteoarthritis (KOA) and reducing bone mass under the tibial plateau. Methods: A healthy adult was selected as the study subject, and X-ray film and CT imaging data were acquired. Mimics 21.0 software was utilized to reconstruct the complete knee joint model and three models representing low-density areas under the tibial plateau with equal volume but varying shapes. These models were then imported into Solidworks 2023 software for assembly and verification. Five KOA finite element models with 22%, 33%, 44%, 55%, and 66% bone mass reduction in the low-density area under tibial plateau and 5 KOA finite element models with 81%, 90%, 100%, 110%, and 121% times of the low-density area model with 66% bone mass loss were constructed, respectively. Under physiological loading conditions of the human lower limb, the distal ends of the tibia and fibula were fully immobilized. An axial compressive load of 1 860 N, following the lower limb force line, was applied to the primary load-bearing area on the femoral head surface. The maximum stress within the tibial plateau, as well as the maximum displacements of the tibial cortical bone and tibial subchondral bone, were calculated and analyzed using the finite element analysis software Abaqus 2022. Subsequently, predictions regarding the alteration of the lower limb force line were made based on the analysis results. Results: The constructed KOA model accorded with the normal anatomical structure of lower limbs. Under the same boundary conditions and the same load, the maximum stress of the medial tibial plateau, the maximum displacement of the tibial cortical bone and the maximum displacement of the cancellous bone increased along with the gradual decrease of bone mass in the low-density area under the tibial plateau and the gradual increase in the volume of the low-density area under tibial plateau, with significant differences ( P<0.05). Conclusion: The existence of a low-density area under tibial plateau suggests a heightened likelihood of knee varus and inward movement of the lower limb force line. Both the volume and reduction in bone mass of the low-density area serve as critical initiating factors. This information can provide valuable guidance to clinicians in proactively preventing knee varus and averting its occurrence.
Assuntos
Densidade Óssea , Análise de Elementos Finitos , Articulação do Joelho , Osteoartrite do Joelho , Tíbia , Tomografia Computadorizada por Raios X , Humanos , Tíbia/anatomia & histologia , Fenômenos Biomecânicos , Osteoartrite do Joelho/fisiopatologia , Adulto , Extremidade Inferior , Suporte de Carga , Masculino , Imageamento Tridimensional , Estresse Mecânico , Simulação por Computador , SoftwareRESUMO
Automatic segmentation of myocardial infarction (MI) regions in late gadolinium-enhanced cardiac magnetic resonance images is an essential step in the computed diagnosis of myocardial infarction. Most of the current myocardial infarction region segmentation methods are based on fully supervised deep learning. However, cardiologists' annotation of myocardial infarction regions in cardiac magnetic resonance images during the diagnosis process is time-consuming and expensive. This paper proposes a semi-supervised myocardial infarction segmentation. It consists of two models: 1) a boundary mining model and 2) an adversarial learning model. The boundary mining model can solve the boundary ambiguity problem by enlarging the gap between the foreground and background features, thus segmenting the myocardial infarction region accurately. The adversarial learning model can make the boundary mining model learn from additional unlabeled data by evaluating the segmentation performance and providing pseudo supervision, which significantly increases the robustness of the boundary mining model. We conduct extensive experiments on an in-house myocardial magnetic resonance dataset. The experimental results on six evaluation metrics demonstrate that our method achieves excellent results in myocardial infarction segmentation and outperforms the state-of-the-art semi-supervised methods.
Assuntos
Infarto do Miocárdio , Humanos , Coração , Benchmarking , Processamento de Imagem Assistida por ComputadorRESUMO
In this work, a series of polymer materials including pomelo peel, cotton fabric, polyurethane foam, and so on, are treated by heated CH3SiCl3, presenting desirable photo-thermal conversion function and hydrophobicity. As a representative material, the surface element and skeleton morphology of pomelo peel foam treated by CH3SiCl3 are analyzed detailedly. It is found that well-hydrophobicity (water contact angle of ~147°) and photo-thermal conversion performance (~91.2 °C under one sun) are attributed to the surface carbonization reaction and formation of CH3-SiO2 nanoparticles. Meanwhile, the treatment of CH3SiCl3 significantly increases the BET surface area to 3.0635 m²/g from 0.0973 m²/g. Therefore, pomelo peel-derived carbon foam presents a desirable adsorption capacity of organic solvents and oils (up to 43.2 times its original weight) and excellent removal efficiency (>99.0%). In addition, the rapid photo-thermal response (achieve ~73 °C at 40 s) and high equilibrium temperature (~91.2 °C) are als° demonstrated in pomelo peel-derived carbon foam. As a result, the absorption rate of highly-viscous oils is effectively promoted by the higher fluidity and capillary action caused by the solar-promoted mechanism. This study offers a scalable, easily operated, and environmentally friendly approach to prepare hydrophobic and photo-thermal materials, thus demonstrating a huge potential in oil/water separation application.
RESUMO
Given environmental or hydrological functions influenced by changing river networks in the development of rapid urbanization, a clear understanding of the relationships between comprehensive urbanization (CUB) and river network characteristics (RNC), storage capacity (RSC), and regulation capacity (RRC) is urgently needed. In the rapidly urbanized Tai Lake Plain (TLP), China, various methods and multisource data were integrated to estimate the dynamics of RNC, RSC, and RRC as well as their interactions with urbanization. The bivariate Moran's I methods were applied to detect and visualize the spatial dependency of RNC, RSC, or RRC on urbanization. Geographically weighted regression (GWR) model was set up to characterize spatial heterogeneity of urbanization influences on RNC, RSC and RRC. Our results indicated that RNC, RSC and RRC variables each showed an overall decreasing trend across space from 1960s to 2010s, particularly in those of tributary rivers. RNC, RSC, or RRC had globally negative correlations with CUB, respectively, but looking at local scale the spatial correlations between each pair were categorized as four types: high-high, high-low, low-low, and low-high. GWR was identified to accurately predict the response of most RNC, RSC, or RRC variables to CUB (R2: 0.6-0.8). The predictive ability of GWR was spatially non-stationary. The obtained relationships presented different directions and strength in space. All variables except for the water surface ratio (Wp) were more positively affected by CUB in the middle eastern parts of TLP. Drainage density, RSC and RRC variables were more negatively influenced by CUB in the northeast compared to other parts. The quantitative results of spatial relationships between urbanization and RNC, RSC or RRC can provide location-specific guidance for river environment protection and regional flood risk management.
Assuntos
Rios , Urbanização , China , LagosRESUMO
Biodegradable poly-(lactide-coε-caprolactone) (PLCL) scaffolds have opened new perspectives for tissue engineering due to their nontoxic and fascinating functionality. Herein, a black phosphorus-based biodegradable material with a combination of promising enhanced hydrophilicity, shape recovery and osteodifferentiation properties was proposed. First, amino black phosphorous (BP-NH2) was prepared by a simple ball milling method. Then, L-lysine-modified black phosphorous (L-NH-BP) was formed by hydrogen bonding between L-lysine and amino BP and integrated into PLCL to form PLCL/L-NH-BP composite fibers. The scaffolds had excellent shape recovery and shape fixity properties. Moreover, based on gene expression and protein level assessment, the scaffolds could enhance the expression of alkaline phosphatase (ALP) and bone morphogenetic protein 2 (BMP2), simultaneously improving the mineralization ability of bone mesenchymal stem cells. Specifically, this new composite material was experimentally verified to be degradable under mild conditions. This strategy provided new insight into the design of multifunctional materials for diverse applications.
Assuntos
Nanofibras , Caproatos , Dioxanos , Interações Hidrofóbicas e Hidrofílicas , Lactonas , Lisina , Fósforo , Poliésteres , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Intensified urbanization has been occurring in the eastern region of China in recent decades, and excessive industrial and household sewage has been discharged into lakes and reservoirs, which has directly lowered water quality and destructed the functions of aquatic ecosystems. Lakes and reservoirs are typically drinking water sources supplying water for metropolitan areas as well as large- and medium-sized cities. Chromophoric dissolved organic matter (CDOM) is the colored fraction of DOM, and its source and optical composition strongly affect water supply safety and the health of surrounding citizens. In April 2021, we collected 68 samples from Reservoir Changtan (n=11), Lake Taihu (n=25), Lake Hongze (n=18), and Lake Gaoyou (n=14), and we further carried out 28 days of laboratory bio-incubation, together with optical measurements and parallel factor analysis (EEMs-PARAFAC) to analyze the bio-degradability ω(BDOC), sources, and optical composition of CDOM in these waters. The results showed that after 28 days of laboratory bio-incubation, the bioavailability of dissolved organic carbon (BDOC) of the four lakes and reservoirs were all higher than 50%. PARAFAC results showed that CDOM collected from the four lakes was composed of four fluorescent components, including a terrestrial humic-like C1, a tryptophan-like C2, and tyrosine-like C3 and C4. Protein-like components (C2, C3, and C4) contributed importantly to the CDOM pool in the four waterbodies, and in Lake Hongze the contribution of C2-C4 was as high as (90.0±2.2)%. In Lake Hongze, total phosphorus (TP) correlated closely with C1-C3, indicating that those components can be used to trace the variability of TP. Among the four waterbodies, a254 was positively correlated with DOC (R2=0.96, P<0.01), indicating that a254 can be used to estimate the dynamics of DOC in these waters. In Lake Taihu, we found a low level of humification index (HIX) and a high level of biological index (BIX), indicating that autochthonous substances contributed importantly to the CDOM pool in this lake. In comparison, allochthonous sources contributed importantly to the CDOM pool in the remaining three waters. The enhanced monitoring of the discharge of industrial and agricultural effluents in the upstream watersheds of the four waters can help to protect the water quality and maintain healthy aquatic ecosystems.
Assuntos
Matéria Orgânica Dissolvida , Lagos , China , Ecossistema , Espectrometria de Fluorescência , Qualidade da ÁguaRESUMO
Lake Poyang has significant differences in hydrological characteristics between the flood and dry seasons. Unraveling the optical composition, bioavailability, fate, and balance of chromophoric dissolved organic matter (CDOM) and organic carbon fluxes in Lake Poyang under different hydrological conditions can help provide advanced schemes on carbon cycling, the transfer and transformation of organic matter, and water resource management of the lake. Three fluorescent components, including a humic-like (C1), a tryptophan-like (C2), and a tyrosine-like (C3) component, were obtained using three-dimensional fluorescence spectroscopy coupled with parallel factor analysis. Prior to and after 28 days of laboratory biodegradation, the means of a254 and the terrestrial humic-like (C1) component in the flood season were both significantly higher than that in the dry season (t-test, P<0.01), indicating that the terrestrial humic-like (C1) component contributed importantly to the CDOM pool. The contribution percentages of protein-like components in the dry season were 81.7% of the summed fluorescent components of CDOM, indicating that there might be discharge of domestic wastewater from areas surrounding the lake in the dry season. The bioavailabilities of the humic-like (C1) component and DOC were 14.0% and 43.2%, respectively, in the dry season. This can be explained by a declined-dilution effect in the lake during the dry rather than in the flood season. We observed no significant difference in the bioavailability of protein-like components under different hydrological conditions. The bioavailability of C1 (i.e.,%ΔC1) showed a decreasing trend from the southern inflowing river mouths to the downstream northern outlet at Hukou in both the flood and dry seasons, indicating that the bioavailability of the C1 decreased following the migration of CDOM in the lake. In the dry season and flood season, Lake Poyang was the source of DOC with fluxes of 14.0×103 t·mon-1 and 1.4×103 t·mon-1, respectively, whereas CDOM fluxes in corresponding periods were the source and weak sink with corresponding fluxes of 9.3×1010 m3·(m·mon)-1 and 1.1×1010 m3·(m·mon)-1, respectively. Therefore, the lake released substantial organic matter to the downstream receiving waters during the dry season, whereas in the flood season, the higher water level in the Yangtze River resulted in a prolonged water residence time of the lake, and a fraction of CDOM was bio-degraded into inorganic nutrients, favoring the metabolisms and the eutrophication process of the lake ecosystem.
Assuntos
Matéria Orgânica Dissolvida , Lagos , Disponibilidade Biológica , China , Ecossistema , Rios , Espectrometria de FluorescênciaRESUMO
Considering the finite resources of nonrenewable fossil fuels and urgent demands of modern society, sodium ion batteries (SIBs) featuring low cost, considerable natural supply and environmental friendless, show huge prospects in energy storage field, especially in constructing massive energy storage networks. Here, we propose a facile polyacrylonitrile@metal organic frameworks composite-derived sulfuration method, for acquiring heteroatoms doped carbon@encapsulated CoS2 nanoparticles (NSPCFS@CoS2) as SIBs anode. This electrode shows long and steady cycling process at 1 A g-1. After running 2095 cycles, it maintains a capacity of 546.3 mA h g-1. An exceedingly low capacity fading ratio of 0.013% per cycle can be acquired. Also, it gives high discharge capacities of 540.7 and 493.6 mA h g-1, even at 4 and 8 A g-1, separately. In addition, NSPCFS@CoS2 possesses a comparative or even better rate capability than other CoS2 based materials and other types of metal sulfides. Overall, this electrode exhibits superior cycling and rate performances. Additionally, its Na+ reaction kinetics and storage mechanism are deeply investigated.
RESUMO
Safety and high energy density have long restricted the large-scale practical application of lithium metal batteries because of the unbridled growth of lithium dendrites and the rapid deteriorating cycle performance of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. Herein, an additive of RbNO3 with multiple functions is proposed for dendrite-free NCM811 lithium metal batteries. Benefiting from the electrostatic shielding effect formed by Rb+ during the Li+ deposition process and the solvation effect of NO3- to regulate lithium deposition, a high Coulombic efficiency of 95.02% (compared with the low Coulombic efficiency of 89.37% in the blank electrolyte) is acquired in Li//Cu cells, and the uniform growth of the lithium metal deposition with a large strawberry-like morphology is achieved. Moreover, when a cathode of NCM811 matches with a lithium metal anode, an extraordinary capacity retention of 93.67% after 200 cycles with a high Coulombic efficiency of 99.7% in the electrolyte with the RbNO3 system (a capacity retention of 80.1% with a Coulombic efficiency of 98.0% for the blank electrolyte) is achieved at 1C. This work provides guidance for the development of high-efficiency additives with dual synergistic regulation effects of anions and cations for lithium metal batteries in the future.
RESUMO
A sandwich-like melamine/phytic acid/silicon nitride hybrid (SW-Si3N4) sheets were prepared by supramolecular wrapping as the hybrid flame retardants for thermoplastic polyurethane (TPU). The introduction of Si3N4 sheets as a template could not only induce the generation of two-dimensional phytic/melamine (PAMA) capping layers, but also produce the synergistic flame-retardant effect on TPU composites. Cone test showed that heat release rate (HRR), smoke production rate (SPR) and total smoke production (TSP) values of TPU were decreased obviously by adding SW-Si3N4. TG-IR test indicated the dramatic inhibition of aromatic compound, hydrocarbons, CO and HCN release. Besides, the thermal conductivity of composites was obviously improved by adding SW-Si3N4. This work may provide better reference for developing multi-functional TPU composites for diverse application.
Assuntos
Retardadores de Chama , Poliuretanos , Temperatura Alta , Condutividade TérmicaRESUMO
Poly (ethylene oxide) (PEO) polymer electrolyte, attracts great attention owing to its excellent flexibility, good processability and high safety compared with liquid electrolytes. However, its low ionic conductivity and weak ability to suppress the lithium dendrite severely restrict the further progress of PEO. Herein, we prepare a high ionic conductivity solid polymer electrolyte for all-solid-state lithium batteries by mixing PEO and magnetically aligned functionalized sepiolite (KFSEP) nanowires. The ionic conductivity of PEO/LiTFSI/10%â¥KFSEP solid polymer electrolyte is 2.0 × 10-5 S cm-1 at 20 °C (The ionic conductivity of PEO/LiTFSI solid polymer electrolyte is 4.0 × 10-7 S cm-1 at 20 °C). The experiments and simulation analysis indicate that the aligned nanowires provide a fast-moving channel for lithium ions. The capacity of Li/PEO/LiTFSI/10%â¥KFSEP/LFP cell is 130 mAh g-1 at 1.0 C under 60 °C after 450cycles. Furthermore, Li/PEO/LiTFSI/10%â¥KFSEP/LFP cell shows 150 mAh g-1 at 0.2 C under 25 °C. The Li/PEO/LiTFSI/10%â¥KFSEP/Li cell can work normally more than 600 h, indicating the high stability and lithium dendrite suppressing function of PEO/LiTFSI/10%â¥KFSEP. Overall, a high performance solid polymer electrolyte with higher safety is constructed by incorporating magnetically aligned sepiolite nanowires into PEO.
RESUMO
In the past few decades, China's rapid industrial activities and urbanization processes have greatly impacted the urban surface water ecosystem. The changes in the quality of urban surface water directly affect the supply and carbon cycling of urban waters. We collected 50 water samples from urban rivers, lakes, and reservoirs in the city of Changchun in June 2020. Three-dimensional fluorescence spectroscopy coupled with parallel factor analysis (EEMs-PARAFAC) was used to unravel the optical characteristics, composition, and sources of chromophoric dissolved organic matter (CDOM). Our results indicated that the mean concentration of DOC is significantly higher in urban rivers than in reservoirs (t-test, P<0.05), and the mean UV absorption coefficient of CDOM a254 of urban rivers is significantly larger than that of park lakes and reservoirs (t-test, P<0.05), indicating that urban rivers have the highest concentration of CDOM. The spectral slope of CDOM absorption S275-295 and the spectral slope ratio SR were shown to be higher in park lakes than in reservoirs, and even higher than in urban rivers (t-test, P<0.001). Three fluorescent components were obtained using PARAFAC, namely terrestrial human-like (C1), microbial human-like (C2) and tryptophan-like (C3) components. The mean fluorescence intensity of C1-C3 was significantly higher in urban rivers than in both the park lakes and reservoirs (t-test, P<0.005), and the mean fluorescence intensity of C1 in the reservoir water body was significantly higher than that of C2 and C3 (t-test, P<0.005), indicating that the discharge of municipal wastewater likely contributes significantly to the CDOM pool of urban rivers in Changchun, and the contribution percentages of highly bio-labile protein-like components to the CDOM pool in these waters are high. Urban wastewater treatment should be strengthened to effectively protect water quality, as well as the economic, environmental, and ecological functions of urban waters in Changchun City.