PaMYB11 promotes suberin deposition in Norway spruce embryogenic tissue during cryopreservation: A novel resistance mechanism against osmosis.

The osmotic resistance mechanism has been extensively studied in whole plants or plant tissues. However, little is known about it in embryogenic tissue (ET) which is widely used in plant-based biotechnological systems. Suberin, a cell wall aliphatic and aromatic heteropolymer, plays a critical role in plant cells against osmosis stress. The suberin regulatory biosynthesis has rarely been studied in gymnosperms. Here, PaMYB11, a subgroup 11 R2R3-MYB transcription factor, plays a key role in the osmotic resistance of Norway spruce (Picea abies) ETs during cryoprotectant pretreatment. Thus, RNA-seq, histological, and analytical chemical analyses are performed on the stable transformations of PaMYB11-OE and PaMYB11-SRDX in Norway spruce ETs. DAP-seq, Y1H, and LUC are further combined to explore the PaMYB11 targets. Activation of PaMYB11 is necessary and sufficient for suberin lamellae deposition on Norway spruce embryogenic cell walls, which plays a decisive role in ET survival under osmotic stress. Transcriptome analysis shows that PaMYB11 enhances suberin lamellae monomer synthesis by promoting very long-chain fatty acid (VLCFA) synthesis. PaPOP, PaADH1, and PaTET8L, the first two (PaADH1 and PaPOP, included) involved in VLCFA synthesis, are proved to be the direct targets of PaMYB11. Our study identified a novel osmotic response directed by PaMYB11 in Norway spruce ET, which provides a new understanding of the resistance mechanism against osmosis in gymnosperms.

Climate of origin shapes variations in wood anatomical properties of 17 Picea species.

BACKGROUND: Variations in hydraulic conductivity may arise from species-specific differences in the anatomical structure and function of the xylem, reflecting a spectrum of plant strategies along a slow-fast resource economy continuum. Spruce (Picea spp.), a widely distributed and highly adaptable tree species, is crucial in preventing soil erosion and enabling climate regulation. However, a comprehensive understanding of the variability in anatomical traits of stems and their underlying drivers in the Picea genus is currently lacking especially in a common garden. RESULTS: We assessed 19 stem economic properties and hydraulic characteristics of 17 Picea species grown in a common garden in Tianshui, Gansu Province, China. Significant interspecific differences in growth and anatomical characteristics were observed among the species. Specifically, xylem hydraulic conductivity (Ks) and hydraulic diameter exhibited a significant negative correlation with the thickness to span ratio (TSR), cell wall ratio, and tracheid density and a significant positive correlation with fiber length, and size of the radial tracheid. PCA revealed that the first two axes accounted for 64.40% of the variance, with PC1 reflecting the trade-off between hydraulic efficiency and mechanical support and PC2 representing the trade-off between high embolism resistance and strong pit flexibility. Regression analysis and structural equation modelling further confirmed that tracheid size positively influenced Ks, whereas the traits DWT, D_r, and TSR have influenced Ks indirectly. All traits failed to show significant phylogenetic associations. Pearson's correlation analysis demonstrated strong correlations between most traits and longitude, with the notable influence of the mean temperature during the driest quarter, annual precipitation, precipitation during the wettest quarter, and aridity index. CONCLUSIONS: Our results showed that xylem anatomical traits demonstrated considerable variability across phylogenies, consistent with the pattern of parallel sympatric radiation evolution and global diversity in spruce. By integrating the anatomical structure of the stem xylem as well as environmental factors of origin and evolutionary relationships, our findings provide novel insights into the ecological adaptations of the Picea genus.

A novel carboxyl polymer-modified upconversion luminescent nanoprobe for detection of prostate-specific antigen in the clinical gray zonebase by flow immunoassay strip.

Prostate specific antigen (PSA) is a widely-used biomarker for the diagnosis, screening, and prognosis of prostate cancer (PCa). It is critical to develop a rapid and convenient method to accurately detect PSA levels, especially when the PSA levels are in the clinical gray area of 4-10 ng/mL. We developed a novel upconversion nanoparticle (UCNP)-based fluorescence lateral flow test strip for qualitatively and quantitatively detecting PSA. The carboxyl group-modified UCNPs (UCNP-COOH) were labeled with anti-PSA antibodies via 1-ethyl-3-(3-(dimethylamino)propyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) as labeling probes to recognize PSA. The fluorescence intensity of the UCNP-probe was then measured with a laser fluorescence scanner. A total of 1397 serum and 20 fingertip blood samples were collected to validate the UCNP strip. A reliable correlation between the area ratio (TC), reflecting the fluorescence intensity of the test/control line, and the PSA concentration was observed (r = 0.9986). The dose-dependent luminescence enhancement showed good linearity in the PSA concentration range from 0.1 to 100.0 ng/mL with a detection limit of 0.1 ng/mL. Our UCNP POCT strip demonstrated excellent accuracy, anti-interference and stability in the gray zone (4-10 ng/mL) of PSA clinical application and outperformed other PSA test strips. The UCNP strip showed good consistency with the Roche chemiluminescence assay in 1397 serum samples. It also showed good performance for PSA detection using fingertip blood samples. This novel UCNP-based test strip could be a sensitive and reliable POCT assay to detect PSA, facilitating the diagnosis and surveillance of PCa.

Enhanced reduction of Cd uptake by wheat plants using iron and manganese oxides combined with citrate in Cd-contaminated weakly alkaline arable soils.

Iron (Fe) and manganese (Mn) oxides can be used to remediate Cd-polluted soils due to their excellent performance in heavy metal adsorption. However, their remediation capability is rather limited, and a higher content of available Mn and Fe in soils can reduce Cd accumulation in wheat plants due to the competitive absorption effect. In this study, goethite and cryptomelane were first respectively used to immobilize Cd in Cd-polluted weakly alkaline soils, and sodium citrate was then added to increase the content of available Mn and Fe content for further reduction of wheat Cd absorption. In the first season, the content of soil-available Cd and Cd in wheat plants significantly decreased when cryptomelane, goethite and their mixture were used as the remediation agents. Cryptomelane showed a better remediation effect, which could be attributed to its higher adsorption performance. The grain Cd content could be decreased from 0.35 mg kg-1 to 0.25 mg kg-1 when the content of cryptomelane was controlled at 0.5%. In the second season, when sodium citrate at 20 mmol kg-1 was further added to the soils with 0.5% cryptomelane treatment in the first season, the content of soil available Cd was increased by 14.8%, and the available Mn content was increased by 19.5%, leading to a lower Cd content in wheat grains (0.16 mg kg-1) probably due to the competitive absorption. This work provides a new strategy for the remediation of slightly Cd-polluted arable soils with safe and high-quality production of wheat.

Analysis of polycomb repressive complex 2 (PRC2) subunits in Picea abies with a focus on embryo development.

BACKGROUND: Conserved polycomb repressive complex 2 (PRC2) mediates H3K27me3 to direct transcriptional repression and has a key role in cell fate determination and cell differentiation in both animals and plants. PRC2 subunits have undergone independent multiplication and functional divergence in higher plants. However, relevant information is still absent in gymnosperms. RESULTS: To launch gymnosperm PRC2 research, we identified and cloned the PRC2 core component genes in the conifer model species Picea abies, including one Esc/FIE homolog PaFIE, two p55/MSI homologs PaMSI1a and PaMSI1b, two E(z) homologs PaKMT6A2 and PaKMT6A4, a Su(z)12 homolog PaEMF2 and a PaEMF2-like fragment. Phylogenetic and protein domain analyses were conducted. The Esc/FIE homologs were highly conserved in the land plant, except the monocots. The other gymnospermous PRC2 subunits underwent independent evolution with angiospermous species to different extents. The relative transcript levels of these genes were measured in endosperm and zygotic and somatic embryos at different developmental stages. The obtained results proposed the involvement of PaMSI1b and PaKMT6A4 in embryogenesis and PaKMT6A2 and PaEMF2 in the transition from embryos to seedlings. The PaEMF2-like fragment was predominantly expressed in the endosperm but not in the embryo. In addition, immunohistochemistry assay showed that H3K27me3 deposits were generally enriched at meristem regions during seed development in P. abies. CONCLUSIONS: This study reports the first characterization of the PRC2 core component genes in the coniferous species P. abies. Our work may enable a deeper understanding of the cell reprogramming process during seed and embryo development and may guide further research on embryonic potential and development in conifers.

Synthesis and Properties of a Novel Thermally Conductive Pressure-Sensitive Adhesive with UV-Responsive Peelability.

Thermally conductive pressure-sensitive adhesive (PSA) has received a great amount of attention in recent years, but the traditional PSA hardly loses adhesion properties after UV irradiation or heating. Therefore, endowing thermally conductive adhesive with UV-responsive peelability becomes a design strategy. Herein, vinyl-functionalized graphene (AA-GMA-G) is prepared by modifying graphene with acrylic acid and subsequently reacting with glycidyl methacrylate. Then, the UV-curable acrylate copolymer is synthesized by grafting glycidyl methacrylate. Finally, the novel thermally conductivity PSA with UV-responsive peelability is obtained by blending the copolymer with AA-GMA-G and photoinitiator. The results show that the PSA at 2 wt% AA-GMA-G loading exhibits an excellent thermal conductivity (0.74 W m-1 K-1 ) and a relatively strong peel strength, increasing by 15% compared with pristine graphene/PSA. Interestingly, the peel strength of AA-GMA-G/PSA can achieve a dramatic drop after UV treatment, and the decrease rate is 96.7%. Therefore, the novel thermally conductive PSA with UV-responsive peelability has potential applications in certain electronic devices.

Improved diagnosis of type-1 diabetes mellitus using multiplexed autoantibodies ELISA array.

Autoantibodies are currently the most robust biomarkers of type 1 diabetes. However, single autoantibody targeted detection is still limited in diabetes diagnosis with poor performance. Here, we develop a multiplexed Array-ELISA assay that can detect five diabetes-related autoantibodies including glutamic acid decarboxylase antibody (GADA), insulinoma antigen 2 antibody (IA-2A), islet cell antibody (ICA), zinc transporter 8 autoantibody (ZnT8-A) and insulin antibody (IAA) simultaneously. This assay achieved 100% accuracy in identifying the positive and negative control samples with good repeatability (CV<15%). We applied the Array-ELISA assay to 140 clinical serum samples of healthy subjects and diabetes patients and the assay showed improved diagnosis accuracy (sensitivity of 62.5%, specificity of 94.3%) compared with the single target immunoblotting test. These data suggest that the Array-ELISA assay can provide diagnostic and predictive ability in the clinical practice of type 1 diabetes.

Terraced and 3D Pyramid-Shaped Polymer Single Crystal via Low Temperature-Assisted Microfluidic Technology.

3D pyramidal polymer single crystals provide spatial gradient variations within the crystal molecules, and these variations facilitate the study of the relationship between structure and properties within the molecules of various complexes with anisotropic structures. As described herein, a low-temperature-assisted microfluidic pore channeling approach is proposed to prepare structurally ordered polymer single crystals. A mixture of dichloromethane and dimethyl sulfoxide is used as a prepolymer, and a liquid microfluidic technique is employed to grow the end-functionalized polymers into 3D polymer single crystals. Through the ordered growth of single crystals, a personalized pyramidal pattern with a homogeneous structure is formed. To evaluate the mesh node density, low-temperature growth time and substrate type are also investigated. Rectangular, pyramidal, and dendritic patterns are synthesized via low-temperature single crystal growth. This work shows that low temperature-assisted microfluidics provides a novel means to tune the 3D structure of polymer single crystals.

Dynamic observation of SARS-CoV-2 IgM, IgG, and neutralizing antibodies in the development of population immunity through COVID-19 vaccination.

BACKGROUND: Currently, mass vaccine inoculation against coronavirus disease-2019 (COVID-19) has been being implemented globally. Rapid and the large-scale detection of serum neutralizing antibodies (NAbs) laid a foundation for assessing the immune response against SARS-CoV-2 infection and vaccine. Additional assessments include the duration of antibodies and the optimal time for a heightened immune response. METHODS: The performance of five surrogate NAbs-three chemiluminescent immunoassay (CLIA) and two enzyme-linked immunosorbent assays (ELISAs)-and specific IgM and IgG assays were compared using COVID-19-vaccinated serum (n = 164). Conventional virus neutralization test (cVNT) was used as a criterion and the diagnostic agreement and correlation of the five assays were evaluated. We studied the antibody responses after the two-dose vaccine in volunteers up to 6 months. RESULTS: The sensitivity and specificity of five surrogate NAb assays ranged from 84% to 100%. Our cVNT results indicated great consistency with the surrogate assays. At 28 days after primary vaccination, the seropositivities of the NAbs, IgG, and IgM were 6%, 4%, and 13%, respectively. After the booster dose, seropositivities reached 14%, 65%, and 97%, respectively. Six months after receipt of the second dose, the NAb positive rate was eventually maintained at 66%. In all COVID-19 convalescents, patients were detected with 100% NAb sat three months after discharge. CONCLUSION: COVID-19 vaccine induced a humoral immune response lasting at least six months. Rapid serological detection was used as a proxy for identifying changes in immunity levels and as a guide to whether an individual may require a booster vaccination.

Integrated Lipidomic and Transcriptomic Analysis Reveals Phospholipid Changes in Somatic Embryos of Picea asperata in Response to Partial Desiccation.

Partial desiccation treatment (PDT) is an effective technology for promoting the germination and conversion of conifer somatic embryos (SEs). PDT, as a drought stress, induces intensive physiological responses in phospholipid metabolism, which are not well understood in the conifer SEs. Here, we integrated lipidomics, transcriptomics and proteomics analyses to reveal the molecular basis of lipid remodeling under PDT in Picea asperata SEs. Among the 82 lipid molecular species determined by mass spectrometry, phosphatidic acid (PA) had a significant effect after PDT and was the most critical lipid in the response to PDT. The transcriptomics results showed that multiple transcripts in the glycerolipid and glycerophospholipid metabolism pathways were differentially expressed, and these included five PLDα1 transcripts that catalyze the conversion of phosphatidylcholine (PC) to PA. Furthermore, the enzyme activity of this phospholipase D (PLD) was significantly enhanced in response to PDT, and PDT also significantly increased the protein level of PLDα1 (MA_10436582g0020). In addition, PA is a key factor in gibberellin, abscisic acid and ethylene signal transduction. One GDI1, one DELLA, three ABI1s, two SnRK2s, one CTR and 12 ERFs showed significantly differential expression between SEs before and after PDT in this study. Our data suggest that the observed increases in the PA contents might result from the activation of PLDα by PDT. PA not only affects the physical and chemical properties of the cell membrane but also participates in plant hormone signal transduction. Our work provides novel insight into the molecular mechanism through which PDT promotes the germination of SEs of coniferous tree species and fills the gap in the understanding of the mechanism of somatic embryo lipid remodeling in response to PDT.

Clostridium, Bacteroides and Prevotella associates with increased fecal metabolites Trans-4-Hydroxy-L-proline and Genistein in active pulmonary tuberculosis patients during anti-tuberculosis chemotherapy with isoniazid-rifampin-pyrazinamide-ethambutol (HRZE).

Purpose: To investigated the changes of gut microbiome and fecal metabolome during anti-tuberculosis chemotherapy with isoniazid (H)-rifampin (R)-pyrazinamide (Z)-ethambutol (E). Patients and methods: (1) In this study, we recruited 168 stool specimens from 49 healthy volunteers without M. tuberculosis (Mtb), 30 healthy volunteers with latently infected by Mtb, 41 patients with active tuberculosis (ATB), 28 patients with 2-month HRZE treatment and 20 patients with 2-month HRZE followed by 4-month HR treatment. (2) We used 16S rRNA sequencing and an untargeted Liquid Chromatograph Mass Spectrometer-based metabolomics to investigate the changes of gut microbiome and the alteration of fecal metabolome, respectively, during anti-TB chemotherapy. Results: Mtb infection can reduce the diversity of intestinal flora of ATB patients and change their taxonomic composition, while the diversity of intestinal flora of ATB patients were restored during anti-TB chemotherapy. Especially, family Veillonellacea and Bateroidaceae and their genera Veillonella and Bacteroides significantly increased in the gut microbiota during anti-TB chemotherapy. Additionally, Mtb infection dynamically regulates fecal metabolism in ATB patients during anti-TB chemotherapy. Interestingly, the altered abundance of fecal metabolites correlated with the altered gut microbiota, especially the change of gut Clostridium, Bacteroides and Prevotella was closely related to the change of fecal metabolites such as Trans-4-Hydroxy-L-proline and Genistein caused by Mtb infection or anti-TB chemotherapy. Conclusion: Anti-TB chemotherapy with HRZE can disrupt both gut microbiotas and metabolome in ATB patients. Some specific genera and metabolites are depleted or enriched during anti-TB chemotherapy. Therefore, revealing potential relevance between gut microbiota and anti-TB chemotherapy will provide potential biomarkers for evaluating the therapeutic efficacy in ATB patients. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-022-01003-2.

Tailorable Membrane-Penetrating Nanoplatform for Highly Efficient Organelle-Specific Localization.

Given the breadth of currently arising opportunities and concerns associated with nanoparticles for biomedical imaging, various types of nanoparticles have been widely exploited, especially for cellular/subcellular level probing. However, most currently reported nanoparticles either have inefficient delivery into cells or lack specificity for intracellular destinations. The absence of well-defined nanoplatforms remains a critical challenge hindering practical nano-based bio-imaging. Herein, the authors elaborate on a tailorable membrane-penetrating nanoplatform as a carrier with encapsulated actives and decorated surfaces to tackle the above-mentioned issues. The tunable contents in such a versatile nanoplatform offer huge flexibility to reach the expected properties and functions. Aggregation-induced emission luminogen (AIEgen) is applied to achieve sought-after photophysical properties, specific targeting moieties are installed to give high affinity towards different desired organelles, and critical grafting of cell-penetrating cyclic disulfides (CPCDs) to promote cellular uptake efficiency without sacrificing the specificity. Hereafter, to validate its practicability, the tailored nano products are successfully applied to track the dynamic correlation between mitochondria and lysosomes during autophagy. The authors believe that the strategy and described materials can facilitate the development of functional nanomaterials for various life science applications.

Comparison of three automatic chemiluminescent immunoassays for monitoring dynamic profile of SARS-CoV-2 IgG and IgM.

BACKGROUND: Seldom performance evaluation and diagnosis comparison studies were reported for different chemiluminescent immunoassay (CLIA) kits approved under an emergency approval program for SARS-CoV-2 infection. METHODS: A total of 100 and 105 serum separately from non-infected populations and COVID-19 patients were detected with SARS-CoV-2 IgM and IgG kits. The characteristics including precision, functional sensitivity, linearity, and accuracy were evaluated for Axceed, iFlash, and Maglumi CLIA kits. RESULTS: Maglumi and iFlash had the best analytical sensitivity for IgM and IgG, respectively. Axceed kits had a linearity response in the detected concentration. The clinical sensitivity of Axceed, iFlash, and Maglumi was 68.0%, 64.9%, and 63.9% with a specificity of 99.0%, 96.0%, and 100% for IgM, 85.6%, 97.9%, and 94.8% with a specificity of 97.0% for IgG. ROC analysis indicated all kits had a diagnostic power greater than 0.9. Notably, either IgM or IgG kits obtained a poor agreement (Kappa value from 0.397 to 0.713) with others. Among 38 recovered patients, 94.7% had an effective immune response, and both seropositive IgM and IgG accounted for the biggest proportion (medium, 42 days onset), then followed by the single seropositive IgG (medium, 50 days onset) in Ab profile. CONCLUSION: The performance of CLIA kits satisfied the diagnosis of SARS-CoV-2 infection. Both positive of IgG and IgM contributes to improve the specificity, and a positive one will enhance the sensitivity.

Light-Up Lipid Droplets Dynamic Behaviors Using a Red-Emitting Fluorogenic Probe.

Intracellular lipid metabolism occurs in lipid droplets (LDs), which is critical to the survival of cells. Imaging LDs is an intuitive way to understand their physiology in live cells. However, this is limited by the availability of specific probes that can properly visualize LDs in vivo. Here, an LDs-specific red-emitting probe is proposed to address this need, which is not merely with an ultrahigh signal-to-noise (S/N) ratio and a large Stokes shift (up to 214 nm) but also with superior resistance to photobleaching. The probe has been successfully applied to real-time tracking of intracellular LDs behaviors, including fusion, migration, and lipophagy processes. We deem that the proposed probe here offers a new possibility for deeper understanding of LDs-associated behaviors, elucidation of their roles and mechanisms in cellular metabolism, and determination of the transition between adaptive lipid storage and lipotoxicity as well.

Complete plastome sequences of Picea asperata and P. crassifolia and comparative analyses with P. abies and P. morrisonicola.

Picea asperata and P. crassifolia have sympatric ranges and are closely related, but the differences between these species at the plastome level are unknown. To better understand the patterns of variation among Picea plastomes, the complete plastomes of P. asperata and P. crassifolia were sequenced. Then, the plastomes were compared with the complete plastomes of P. abies and P. morrisonicola, which are closely and distantly related to the focal species, respectively. We also used these sequences to construct phylogenetic trees to determine the relationships among and between the four species as well as additional taxa from Pinaceae and other gymnosperms. Analysis of our sequencing data allowed us to identify 438 single nucleotide polymorphism (SNPs) point mutation events, 95 indel events, four inversion events, and seven highly variable regions, including six gene spacer regions (psbJ-petA, trnT-psaM, trnS-trnD, trnL-rps4, psaC-ccsA, and rps7-trnL) and one gene (ycf1). The highly variable regions are appropriate targets for future use in the phylogenetic reconstructions of closely related, sympatric species of Picea as well as Pinaceae in general.

pH-Responsive Porous Nanocapsules for Controlled Release.

In this work pH-responsive porous nanocapsules have been successfully prepared from a ternary graft copolymer, poly(glycidyl methacrylate)-g-[poly(2-cinnamoyloxyethyl methacrylate)-r-poly(ethylene glycol) methyl ether-r-poly(2-diethylaminoethyl methacrylate)] or PGMA-g-(PCEMA-r-MPEG-r-PDEAEMA). The graft copolymers were fabricated by grafting three types of polymer chains onto the backbone polymer by using click chemistry. These ternary copolymers underwent self-assembly to form vesicles in a DMF/water solvent mixture. While the MPEG chains served as the corona and stabilized the vesicles, the vesicle wall was composed of a dominant PCEMA continuous phase that was interspersed by PDEAEMA domains. After photo-cross-linking, the PDEAEMA domains were embedded in the structurally locked PCEMA wall. By decreasing the pH of the external solution, we were able to trigger the release of encapsulated pyrene due to the capsule wall becoming porous as a result of the PDEAEMA chains bearing positively charged amine groups stretching into the water. While these pH-responsive porous nanocapsules exhibited potential applications in drug delivery, detection and catalysis, the strategy reported in this contribution also represented a new paradigm for the design and preparation of other novel stimuli-responsive porous nanocapsules.

Robust Stimuli-Responsive Membranes Prepared from a Blend of Polysulfone and a Graft Copolymer Bearing Binary Side Chains with Thermo- and pH-Responsive Switching Behavior.

A stimuli-responsive membrane exhibiting independent pH- and temperature-responsive behavior was fabricated from a blend of commercial polysulfone with a functional amphiphilic binary graft copolymer, namely, polysulfone-graft-(poly(isopropylacrylamide-co-acrylic acid)-random-poly(methyl acrylate)), denoted PSf-g-(P(NIPAAm-co-AA)-r-PMMA). Two graft copolymers with different lengths of P(NIPAAm-co-AA) side chains were designed and enriched on the membrane surface to serve as thermo- and pH-responsive on/off switches. The differences between the dual-responsive behaviors of the two kinds of polymer-blend membranes were studied by water-flux and contact-angle measurements. The PMMA side chains served to securely anchor the graft copolymers to the membrane substrate, and the blended membrane prepared from binary graft copolymer was more stable and exhibited more robust stimuli-responsive behavior than that prepared from mono-graft copolymer PSf-g-P(NIPAAm-co-AA).

Preparation of superhydrophobic films based on the diblock copolymer P(TFEMA-r-Sty)-b-PCEMA.

The diblock copolymer poly[2,2,2-trifluoroethyl methacrylate-r-styrene]-block-poly[(2-cinnamoyloxyethyl methacrylate)] [P(TFEMA-r-Sty)-b-PCEMA] was synthesized via atom transfer radical polymerization. The copolymer underwent self-assembly in TFEMA/CH2Cl2 to form spherical micelles. Photo-cross-linking of the PCEMA domains of these micelles yielded cross-linked nanoparticles. The cross-linked nanoparticles were subsequently cast from CH2Cl2/methanol solvent mixtures at methanol volume fractions of more than 30% to yield rough surfaces bearing small nanobumps on micron-sized aggregations that were connected together to form cross-linked nanoparticles. These surfaces were superhydrophobic with a water contact angle of 161 ± 1° and a sliding angle of 6 ± 1°. Spraying these nanoparticles onto substrates exhibiting microscale roughness, such as filter paper, by a traditional coating technique also created superhydrophobic surfaces. A thin layer of nanoscale spherical protrusions was observed on the microscale fibers of filter paper by scanning electron microscopy. The coated filter paper samples exhibited a water contact angle and a sliding angle of 153 ± 1° and 9 ± 1°, respectively.

Superparamagnetic-oil-filled nanocapsules of a ternary graft copolymer.

Stearic and oleic acid-coated Fe3O4 nanoparticles were dispersed in decahydronaphthalene (DN). This oil phase was dispersed in water using ternary graft copolymer poly(glycidyl methacrylate)-graft-[polystyrene-ran-(methoxy polyethylene glycol)-ran-poly(2-cinnamoyloxyethyl methacrylate)] or PGMA-g-(PS-r-MPEG-r-PCEMA) to yield capsules. The walls of these capsules were composed of PCEMA chains that were soluble in neither water nor DN, and the DN-soluble PS chains stretched into the droplet phase and the water-soluble MPEG chains extended into the aqueous phase. Structurally stable capsules were prepared by photolyzing the capsules with UV light to cross-link the PCEMA layer. Both the magnetite particles and the magnetite-containing capsules were superparamagnetic. The sizes of the capsules increased as they were loaded with more magnetite nanoparticles, reaching a maximal loading of ~0.5 mg of ligated magnetite nanoparticles per mg of copolymer. But the radii of the capsules were always <100 nm. Thus, a novel nanomaterial--superparamagnetic-oil-filled polymer nanocapsules--was prepared. The more heavily loaded capsules were readily captured by a magnet and could be redispersed via shaking. Although the cross-linked capsules survived this capturing and redispersing treatment many times, the un-cross-linked capsules ruptured after four cycles. These results suggest the potential to tailor-make capsules with tunable wall stability for magnetically controlled release applications.

pH-responsive nanoemulsions for controlled drug release.

Three ternary graft copolymers bearing polystyrene (PS), poly(ethylene glycol) methyl ether (MPEG), and poly(acrylic acid) (PAA) side chains were synthesized and characterized. At pH = 7.4, these copolymers stabilized doxorubicin (DOX)-containing benzyl benzoate (BBZ) nanoemulsion droplets in water and formed a compact polymer layer to inhibit DOX release. Upon lowering the solution pH to 5.0, the AA groups dissociated less and became less soluble. Moreover, the neutralized AA groups formed presumably H-bonded complexes with the EG units, reducing the solubility of the EG units. This dual action drastically shifted the hydrophilic and hydrophobic balance of the copolymer and caused the original stabilizing polymer layer to rupture and the nanoemulsion droplets to aggregate, releasing DOX. The rate and extent of DOX release could be increased by matching the numbers of PAA and MPEG chains per graft copolymer. In addition, these nanoemulsions were not toxic and entered human carcinoma cells, releasing DOX there. Thus, these nanoemulsions have potential as drug delivery vehicles.