Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer.

Biology, medicine, and chemistry all rely heavily on highly sensitive optical fiber temperature sensors. To the best of our knowledge, this research introduces a unique design framework for high-performance fiber temperature sensors that helps eliminate the all-fiber interferometers' sensitivity bottleneck. A section of photopolymerized waveguide is embedded in a typical Mach-Zehnder interferomenter framework with multimode fiber-single mode fiber-multimode fiber (MSM) structure. The thermal-optical coefficient (TOC) of the photopolymerized waveguide core, which is created via the fiber-end lithography technique, differs dramatically from that of the resin cladding. Due to the considerable TOC difference, the phase difference between the interfering beams significantly increases as the temperature changes. The fundamental variables affecting temperature sensitivity are conceptually explored and experimentally verified. The suggested device achieves a typical temperature sensitivity of 1.15 nm/ ∘C in the range of 30-100 ∘C, which is about 10 times as high as that of the all-fiber MSM sensors. The suggested designing framework offers a fresh thought for creating high-performing fiber optic temperature sensors.

Lab-on-fiber: laser-induced micro-cavity for a relative humidity measurement.

The lab-on-fiber design philosophy is the foundation for creating high-performance integrated fiber sensors. Hence, this Letter proposes an ultra-compact Fabry-Perot interferometer (FPI) based on a laser-induced micro-cavity (LIMC-FPI) on a fiber end for measuring relative humidity. To our knowledge, this novel approach, named the fiber-end photopolymerization (FEP) technique, is applied to create a micro-cavity. Specifically, a pair of humidity-sensitive polymer pillars and a resin end cap obtained by FEP are integrated to generate the cavity. As the ambient humidity changes, the pillars lengthen or shorten, resulting in the spectral evolution of the LIMC-FPI. A typical humidity sensitivity of 0.18 nm/%RH is obtained experimentally. For monitoring the human breathing process, the LIMC-FPI is responsive in the breathing frequency range of 0.2 to 0.5 Hz, allowing a response and recovery time of less than 0.388 s and 1.171 s, respectively. This work introduces a fresh and cost-effective approach for developing lab-on-fiber concept-based sensors.

Exoskeleton type long-period fiber grating for cross-talk-resistance single-parameter measurement.

This paper proposes a new, to the best of our knowledge, design framework of long-period fiber grating (LPFG) sensors resistant to multi-parameter cross talk. A section of hollow quartz capillary (HQC), which acts as an exoskeleton, is periodically merged with a single-mode fiber (SMF) by the arc-discharge method. The mechanical stress in the SMF is released while the thermal stress is enhanced after a high-temperature fusion process. Under the influence of the elastic-optical effect, the refractive index of the core is periodically modulated along the axial direction to form an exoskeleton long-period fiber grating (Es-LPFG). The unique exoskeleton structure not only induces mode coupling but also enables the proposed device to resist cross talk among the strain, ambient refractive index, and vector bending. The temperature is able to be measured independently with a sensitivity of 74 pm/ ∘C. The novel Es-LPFG is promising in single-parameter sensing, mode-locked lasers, and frequency-locked gain flattening.