Topical Administration of Verapamil in Poly(ethylene glycol)-Modified Liposomes for Enhanced Sinonasal Tissue Residence in Chronic Rhinosinusitis: Ex Vivo and In Vivo Evaluations.

Verapamil is a calcium channel blocker that holds promise for the therapy of chronic rhinosinusitis (CRS) with and without nasal polyps. The verapamil-induced side effects limit its tolerated dose via the oral route, underscoring the usefulness of localized intranasal administration. However, the challenge to intranasal administration is mucociliary clearance, which diminishes localized dose availability. To overcome this challenge, verapamil was loaded into a mucoadhesive cationic poly(ethylene glycol)-modified (PEGylated) liposomal carrier. Organotypic nasal explants were exposed to verapamil liposomes under flow conditions to mimic mucociliary clearance. The liposomes resulted in significantly higher tissue residence compared with the free verapamil control. These findings were further confirmed in vivo in C57BL/6 mice following intranasal administration. Liposomes significantly increased the accumulation of verapamil in nasal tissues compared with the control group. The developed tissue-retentive verapamil liposomal formulation is considered a promising intranasal delivery system for CRS therapy.

Biophysical, Molecular and Proteomic Profiling of Human Retinal Organoid-Derived Exosomes.

PURPOSE: There is a growing interest in extracellular vesicles (EVs) for ocular applications as therapeutics, biomarkers, and drug delivery vehicles. EVs secreted from mesenchymal stem cells (MSCs) have shown to provide therapeutic benefits in ocular conditions. However, very little is known about the properties of bioreactor cultured-3D human retinal organoids secreted EVs. This study provides a comprehensive morphological, nanomechanical, molecular, and proteomic characterization of retinal organoid EVs and compares it with human umbilical cord (hUC) MSCs. METHODS: The morphology and nanomechanical properties of retinal organoid EVs were assessed using Nanoparticle tracking analysis (NTA) and Atomic force microscopy (AFM). Gene expression analysis of exosome biogenesis of early and late retinal organoids were compared using qPCR. The protein profile of the EVs were analyzed with proteomic tools. RESULTS: NTA indicated the average size of EV as 100-250 nm. A high expression of exosome biogenesis genes was observed in late retinal organoids EVs. Immunoblot analysis showed highly expressed exosomal markers in late retinal organoids EVs compared to early retinal organoids EVs. Protein profiling of retinal organoid EVs displayed a higher differential expression of retinal function-related proteins and EV biogenesis proteins than hUCMSC EVs, implicating that the use of retinal organoid EVs may have a superior therapeutic effect on retinal disorders. CONCLUSION: This study provides supplementary knowledge on the properties of retinal organoid EVs and suggests their potential use in the diagnostic and therapeutic treatments for ocular diseases.

Role of 3D Printing in the Development of Biodegradable Implants for Central Nervous System Drug Delivery.

Increased life expectancy has led to a rise in age-related disorders including neurological diseases such as Alzheimer's disease and Parkinson's disease. Limited progress has been made in the development of clinically translatable therapies for these central nervous system (CNS) diseases. Challenges including the blood-brain barrier, brain complexity, and comorbidities in the elderly population are some of the contributing factors toward lower success rates. Various invasive and noninvasive ways are being employed to deliver small and large molecules across the brain. Biodegradable, implantable drug-delivery systems have gained lot of interest due to advantages such as sustained and targeted delivery, lower side effects, and higher patient compliance. 3D printing is a novel additive manufacturing technique where various materials and printing techniques can be used to fabricate implants with the desired complexity in terms of mechanical properties, shapes, or release profiles. This review discusses an overview of various types of 3D-printing techniques and illustrative examples of the existing literature on 3D-printed systems for CNS drug delivery. Currently, there are various technical and regulatory impediments that need to be addressed for successful translation from the bench to the clinical stage. Overall, 3D printing is a transformative technology with great potential in advancing customizable drug treatment in a high-throughput manner.

Targeting lung cancer stem cells using combination of Tel and Docetaxel liposomes in 3D cultures and tumor xenografts.

Cancer stem cells (CSCs) accounts for recurrence and resistance to chemotherapy in various tumors. Efficacy of chemotherapeutic drugs is limited by tumor stromal barriers, which hinder their penetration into deep tumor sites. We have earlier shown telmisartan (Tel) pretreatment prior to Docetaxel (DTX) administration enhances anti-cancer effects in non-small cell lung cancer (NSCLC). Herein, we demonstrated for the first time the efficacy of Docetaxel liposomes (DTXPL) in combination with Tel in 3D cultures of H460 cells by using polysaccharide-based hydrogels (TheWell Biosciences) and also in xenograft model of DTX resistant H460 derived CD133+ lung tumors. DTXPL and Tel combination showed enhanced cytotoxicity in H460 WT 3D cultures by two folds. In H460 3D cultures, Tel pretreatment showed increased liposomal uptake. DTXPL and Tel combination treated tumors showed reduction in tumor volume (p < .001), increased apoptosis and downregulation of CSC markers (p < .01) in H460 WT and DTX resistant CD133+ xenograft models.

Rapamycin Eyedrops Increased CD4+Foxp3+ Cells and Prevented Goblet Cell Loss in the Aged Ocular Surface.

Dry eye disease (DED), one of the most prevalent conditions among the elderly, is a chronic inflammatory disorder that disrupts tear film stability and causes ocular surface damage. Aged C57BL/6J mice spontaneously develop DED. Rapamycin is a potent immunosuppressant that prolongs the lifespan of several species. Here, we compared the effects of daily instillation of eyedrops containing rapamycin or empty micelles for three months on the aged mice. Tear cytokine/chemokine profile showed a pronounced increase in vascular endothelial cell growth factor-A (VEGF-A) and a trend towards decreased concentration of Interferon gamma (IFN)-γ in rapamycin-treated groups. A significant decrease in inflammatory markers in the lacrimal gland was also evident (IFN-γ, IL-12, CIITA and Ctss); this was accompanied by slightly diminished Unc-51 Like Autophagy Activating Kinase 1 (ULK1) transcripts. In the lacrimal gland and draining lymph nodes, we also observed a significant increase in the CD45+CD4+Foxp3+ cells in the rapamycin-treated mice. More importantly, rapamycin eyedrops increased conjunctival goblet cell density and area compared to the empty micelles. Taken together, evidence from these studies indicates that topical rapamycin has therapeutic efficacy for age-associated ocular surface inflammation and goblet cell loss and opens the venue for new investigations on its role in the aging process of the eye.

Whole-Eye Perfusion Model for Screening of the Ocular Formulations via Confocal Laser Scanning Microscopy.

Various physiological, anatomical barriers make ocular drug delivery very challenging. Hence, better in vitro screening models are needed for rapid screening of the formulations. In this study, a simple whole-eye perfusion model was designed and its application was explored for screening targeted formulation across the full-thickness cornea using confocal laser scanning microscopy. PEG-cholecalciferol-based integrin targeted coumarin-6 micelles (TC6M) and non-targeted coumarin-6 micelles (NTC6M) were developed by solvent diffusion evaporation technique. The formulations NTC6M and TC6M had particles size 23.5 ± 5 nm and 28.5 ± 6 nm respectively and osmolality of 294-300 mOsml/Kg. The whole-eye perfusion model was developed using porcine eye. TC6M and NTC6M were instilled on the excised porcine eyes as well as in the eyes of NZW rabbits. Corneas were excised from the experimental eyes; coumarin-6 penetration across the corneas was analyzed using confocal microscope. Coumarin-6-loaded micelles had particle size below 50 nm. NTC6M formulations showed penetration to the deeper layers up to 500 µm porcine eyes and up to 50 µm in rabbit corneas. However, TC6M formulations exhibited superior retention, as higher fluorescent intensities were observed in upper layers up to 50 µm depth in the porcine eye and 20 µm depth in rabbit eye. Hence, applicability of whole-eye perfusion model in preliminary screening of the formulations was successfully demonstrated. Whole-eye perfusion model when combined with confocal microscopy has potential to be used as an efficient tool for rapid screening and optimization of various ophthalmic formulations.

Combination of UVB Absorbing Titanium Dioxide and Quercetin Nanogel for Skin Cancer Chemoprevention.

Sunscreens are widely prescribed and used to prevent skin cancer; however, they have been reported to contain various chemicals which mimic hormones and disrupt hormonal functioning in humans. The aim of this study was to develop topical nanogel for skin cancer prevention using an antioxidant compound quercetin (Qu) and inorganic titanium dioxide (TiO2). Two formulations of Qu nanocrystals were optimized with low and high concentration of drug using the Box-Behnken design with the quadratic response surface model and further homogenized with TiO2. Qu nanocrystal (0.08% and 0.12%) formulations showed a particle size of 249.65 ± 2.84 nm and 352.48 ± 3.56 nm with zeta potential of - 14.7 ± 0.41 mV and - 19.6 ± 0.37 mV and drug content of 89.27 ± 1.39% and 90.38 ± 1.81% respectively. Scanning electron microscopy (SEM) images showed rod-shaped nanocrystals with a particle size below 400 nm. Qu (0.08%), Qu (0.12%), Qu (0.12%) + TiO2 (5%), and Qu (0.12%) + TiO2 (15%) nanogels showed over 70% drug release with significantly (p < 0.001) enhanced skin deposition of Qu as compare with Qu suspension within 24 h. The average numbers of tumor, tumor volume, and percentage of animals with tumors at onset in the Qu (0.12%) + TiO2 (15%) nanogel-pretreated group was found to be significantly (p < 0.05) less as compared with the UV only exposed group. Further, Qu (0.12%) + TiO2 (15%) nanogel significantly (p < 0.001) downregulated COX-2, EP3, EP4, PCNA, and cyclin D1 expressions in contrast to Qu and TiO2 only pretreated groups. Therefore, novel combination of Qu (0.12%) + TiO2 (15%) with enhanced skin deposition can be used as a chemopreventive strategy in UVB-induced skin photocarcinogenesis.

Tacrolimus Loaded PEG-Cholecalciferol Based Micelles for Treatment of Ocular Inflammation.

PURPOSE: Poor corneal permeability, nasolacrimal drainage and requirement of chronic administration are major drawbacks of existing therapies for ocular inflammation. Hence, we designed topical micelles of PEG2000 conjugated with cholecalciferol (PEGCCF). METHODS: Integrin targeted tacrolimus loaded PEGCCF micelles (TTM) were prepared by solvent diffusion evaporation method and characterized for particle size, osmolality, encapsulation efficiency and drug loading. Therapeutic potential of TTM was evaluated in benzalkonium chloride induced ocular inflammation model in BALB/c mice. Corneal flourescein staining and histopathological analysis of corneal sections was performed. RESULTS: TTM had a particle size of 45.3 ± 5.3 nm, encapsulation efficiency (88.7 ± 0.9%w/w) and osmolality of 292-296 mOsmol/Kg. TTM significantly reduced the corneal fluorescence as compared to tacrolimus suspension (TACS). H&E staining showed that TTM could restore corneal epithelial thickness, reduce stromal edema (p < 0.05) and decrease number of inflammatory cells (p < 0.01) compared with TACS. Immunohistochemistry analysis demonstrated lower expression of Ki67 + ve cells (p < 0.05) and IL-6 throughout the cornea against TACS (p < 0.01) and the control (p < 0.001). CONCLUSIONS: TTM is an innovative delivery system for improving ocular inflammation due to a) integrin targeting b) PEGCCF in the form of carrier and c) anti-inflammatory and synergistic effect (due to Pgp inhibition) with TAC.

Development of Hot Melt Extruded Solid Dispersion of Tamoxifen Citrate and Resveratrol for Synergistic Effects on Breast Cancer Cells.

Primary standard therapy for ER-positive breast cancer being tamoxifen, newer delivery approach for enhancement of dissolution and therapeutic efficiency of tamoxifen through oral route could be a possible solution. In the present study, we investigated combination of tamoxifen (TAM) with resveratrol (RES) and observed that the combination is effective on MCF-7 breast cancer cells. To ensure co-delivery of the drugs, we explored the hot melt extrusion technique for simultaneously extruding two drugs together in order to enhance their bioavailability. As both are class II drugs with dissolution limited bioavailability, detailed formulation and process parameter analyses were carried out. Detailed characterization using microscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray powder diffraction (XRD) confirmed that both the drugs were molecularly dispersed in the matrix of Soluplus, CremophorRH40, and Poloxamer188, and no interactions between the ingredients were there during hot melt extrusion (HME) process. Dissolution studies confirmed that HME extrudates were able to release drug more rapidly than simple suspension formulation. Further, pharmacokinetic studies in rats were carried out for tamoxifen. Results demonstrated that extrusion significantly increased the tamoxifen oral bioavailability (p < 0.05) (Tmax = 2.00 ± 0.56 h, Cmax = 3.66 ± 1.49 µg/mL, AUC = 39.80 ± 16.24 µg h/mL, MRT = 20.49 ± 5.71) compared to the conventional suspension of tamoxifen (Tmax = 2.00 ± 0.71 h, Cmax = 2.41 ± 0.84 µg/mL, AUC = 12.82 ± 3.99 µg h/mL, MRT = 18.24 ± 5.95 h). In vitro cytotoxicity studies of TAM, RES, and their combination (TAM-RES) were evaluated with MCF7 cells. The combination showed significantly lower IC50 compared to TAM with increasing ratio of RES which is a result of apoptosis. HME-based simultaneous extrusion of TAM and RES formulation provides a suitable formulation strategy for breast cancer treatment and establishes proof of concept for extruding multiple drugs simultaneously for other applications in future.

Cholecalciferol-PEG Conjugate Based Nanomicelles of Doxorubicin for Treatment of Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) is the leading cancer in women. Chemotherapeutic agents used for TNBC are mainly associated with dose-dependent toxicities and development of resistance. Hence, novel strategies to overcome resistance and to offer dose reduction are warranted. In this study, we designed a novel dual-functioning agent, conjugate of cholecalciferol with PEG2000 (PEGCCF) which can self-assemble into micelles to encapsulate doxorubicin (DOX) and act as a chemosensitizer to improve the therapeutic potential of DOX. DOX-loaded PEGCCF (PEGCCF-DOX) micelles have particle size, polydispersity index (PDI), and zeta potential of 40 ± 8.7 nm, 0.180 ± 0.051, and 2.39 ± 0.157 mV, respectively. Cellular accumulation studies confirmed that PEGCCF was able to concentration-dependently enhance the cellular accumulation of DOX and rhodamine 123 in MDA-MB-231 cells through its P-glycoprotein (P-gp) inhibition activity. PEGCCF-DOX exhibited 1.8-, 1.5-, and 2.9-fold enhancement in cytotoxicity of DOX in MDA-MB-231, MDA-MB-468, and MDA-MB-231DR (DOX-resistant) cell lines, respectively. Western blot analyses showed that PEGCCF-DOX caused significant reduction in tumor markers including mTOR, c-Myc, and antiapoptotic marker Bcl-xl along with upregulation of preapoptotic marker Bax. Further, reduction in mTOR activity by PEGCCF-DOX indicates reduced P-gp activity due to P-gp downregulation as well and, hence, PEGCCF causes enhanced chemosensitization and induces apoptosis. Substantially enhanced apoptotic activity of DOX (10-fold) in MDA-MB-231(DR) cells confirmed apoptotic potential of PEGCCF. Conclusively, PEGCCF nanomicelles are promising delivery systems for improving anticancer activity of DOX in TNBC, thereby reducing its side effects and may act as a potential carrier for other chemotherapeutic agents.

Role of In Vitro Models for Development of Ophthalmic Delivery Systems.

There is emergent need for in vitro models which are physiologically correct, easy to reproduce, and mimic characteristic functionalities of desired tissue, organ, or diseases state for ophthalmic drug screening, as well as disease modeling. To date, a variety of in vitro models have been developed for the applications ranging from 2D cell culture-based monolayers, multilayer, or co-culture models, to 3-dimensional (3D) organoids, 3D printed and organ on chip systems. Each model has its own pros and cons. While simple models are easier to create, and faster to reproduce, they lack recapitulation of the complex framework, functionalities, and properties of tissues or their subunits. Recent advancements in technologies and integration with tissue engineering and involvement of microfluidic systems have offered novel platforms which can better mimic the in vivo microenvironment, thus possessing potential in transformation of ophthalmic drug development. In this review we summarize existing in vitro ocular models while discussing applicability, drawbacks associated with them, and possible future applications.

Synergistic effects of methyl 2-cyano-3,11-dioxo-18beta-olean-1,-12-dien-30-oate and erlotinib on erlotinib-resistant non-small cell lung cancer cells.

Non-small cell lung cancer (NSCLC) is often characterized by an underlying mutation in the epidermal growth factor receptor (EGFR), contributing to aggressive metastatic disease. Methyl 2-cyano-3,11-dioxo-18beta-olean-1,12-dien-30-oate (CDODA-Me), a glycyrrhetinic acid derivative, reportedly improves the therapeutic response to erlotinib (ERL), an EGFR tyrosine kinase inhibitor. In the present study, we performed a series of studies to demonstrate the efficacy of CDODA-Me (2 µM) in sensitizing HCC827R (ERL-resistant) cells to ERL. Herein, we first established the selectivity of ERL-induced drug resistance in the HCC827R cells, which was sensitized when ERL was combined with CDODA-Me (2 µM), shifting the IC50 from 23.48 µM to 5.46 µM. Subsequently, whole transcriptomic microarray expression data demonstrated that the combination of ERL + CDODA-Me elicited 210 downregulated genes (0.44% of the whole transcriptome (WT)) and 174 upregulated genes (0.36% of the WT), of which approximately 80% were unique to the ERL + CDODA-Me group. Synergistic effects centered on losses to cell cycle progression transcripts, a reduction of minichromosome maintenance complex components (MCM2-7), all key components of the Cdc45·MCM2-7GINS (CMG) complex, and replicative helicases; these effects were tantamount to the upregulation of processes associated with the nuclear factor erythroid 2 like 2 translational response to oxidative stress, including sulfiredoxin 1, heme oxygenase 1, and stress-induced growth inhibitor 1. Collectively, these findings indicate that the synergistic therapeutic effects of ERL + CDODA-Me on resistant NSCLC cells are mediated via the inhibition of mitosis and induction of oxidative stress.

Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening.

A series of stable and ready-to-use bioinks have been developed based on the xeno-free and tunable hydrogel (VitroGel) system. Cell laden scaffold fabrication with optimized polysaccharide-based inks demonstrated that Ink H4 and RGD modified Ink H4-RGD had excellent rheological properties. Both bioinks were printable with 25-40 kPa extrusion pressure, showed 90% cell viability, shear-thinning and rapid shear recovery properties making them feasible for extrusion bioprinting without UV curing or temperature adjustment. Ink H4-RGD showed printability between 20 and 37 °C and the scaffolds remained stable for 15 days at temperature of 37 °C. 3D printed non-small-cell lung cancer (NSCLC) patient derived xenograft cells (PDCs) showed rapid spheroid growth of size around 500 µm in diameter and tumor microenvironment formation within 7 days. IC50 values demonstrated higher resistance of 3D spheroids to docetaxel (DTX), doxorubicin (DOX) and erlotinib compared to 2D monolayers of NSCLC-PDX, wild type triple negative breast cancer (MDA-MB-231 WT) and lung adenocarcinoma (HCC-827) cells. Results of flow property, shape fidelity, scaffold stability and biocompatibility of H4-RGD suggest that this hydrogel could be considered for 3D cell bioprinting and also for in-vitro tumor microenvironment development for high throughput screening of various anti-cancer drugs.

High-throughput 3D bioprinting of corneal stromal equivalents.

In this study we designed high-throughput 3D bioprinting of corneal equivalents which may address the need for in vitro models. In our digital 3D cornea model, average dimensions of adult cornea were converted to 3D shapes, then to G-code files which were printed by BIOX printer (CELLINK). To maintain the curvature of cornea, a support scaffold was designed using stereolithographic printer. The support scaffold could facilitate the printing of 6-12 corneas at a time thus enabling high-throughput printing. Human corneal keratocytes (HCKs) were incorporated in the optimized bio-ink, and cell-laden corneal stromal equivalents were printed. Printed structures were cross-linked by calcium chloride 100 mM, washed with Hanks' Balanced Salt Solution and incubated at 37°C in fibroblast media. Printed corneas were analyzed for live dead assay, Alamar assay, and expression of fibronectin and actin green markers. Printed corneas were able to maintain their structure, integrity, and clarity. Live dead assay and Alamar assay demonstrated that HCKs maintained high viability (>95%) for 2 weeks. HCKs in the printed corneas showed expression for fibronectin and actin green. In conclusion, high-throughput fabrication of 3D printed corneal stromal equivalents using a combination of stereolithography printing, extrusion based printing, and micro-transfer molding techniques was achieved.

Formulation of topical ibuprofen solid lipid nanoparticle (SLN) gel using hot melt extrusion technique (HME) and determining its anti-inflammatory strength.

Solid lipid nanoparticles (SLN) have been formulated using various batch processes, e.g., solvent diffusion evaporation, emulsification solvent evaporation followed by size reduction using high-pressure homogenization (HPH) or ultrasonication. However, for the manufacturing of formulations, continuous processes are always preferred over batch processes since they are more efficient and offer better quality of the end product. Hence, we developed topical SLN of ibuprofen (IBU) using hot melt extrusion (HME), prepared a gel formulation, and performed its in vitro and in vivo evaluation. Effect of different variables of HME equipment and materials used in SLN was optimized using design of experiment (DoE) approach. Stable 0.48% IBU SLN with particle size 60.2 ± 4.81 nm and entrapment efficiency 90.41 ± 3.46% were developed which further gelled using 1% carbopol 981A. Drug release study, skin deposition study, and in vivo anti-inflammatory activity studies showed 84.37 ± 4.65% drug release, 12.05 ± 0.81% drug deposition, and 40.17 ± 2.41% edema inhibition respectively in case of IBU SLN gel (IBU-SLN-G) which was significantly higher (p < 0.05) than control IBU gel (C-IBU-G) with 50.11 ± 0.57% drug release, 4.11 ± 1.10% deposition, and 20.08 ± 3.23% edema inhibition respectively. In conclusion, HME offers a single step process for manufacturing for SLN which avoids high stress particle size reduction techniques used for SLN preparation.

Synergistic effects of methyl 2-cyano-3,11-dioxo-18beta-olean-1,-12-dien-30-oate and erlotinib on erlotinib-resistant non-small cell lung cancer cells / 药物分析学报

Non-small cell lung cancer (NSCLC) is often characterized by an underlying mutation in the epidermal growth factor receptor (EGFR),contributing to aggressive metastatic disease.Methyl 2-cyano-3,11-dioxo-18beta-olean-1,12-dien-30-oate (CDODA-Me),a glycyrrhetinic acid derivative,reportedly improves the therapeutic response to erlotinib (ERL),an EGFR tyrosine kinase inhibitor.In the present study,we performed a series of studies to demonstrate the efficacy of CDODA-Me (2 μM) in sensitizing HCC827R(ERL-resistant) cells to ERL.Herein,we first established the selectivity of ERL-induced drug resistance in the HCC827R cells,which was sensitized when ERL was combined with CDODA-Me (2 μ.M),shifting the IC5o from 23.48 μM to 5.46 μM.Subsequently,whole transcriptomic microarray expression data demonstrated that the combination of ERL + CDODA-Me elicited 210 downregulated genes (0.44％ of the whole transcriptome (WT)) and 174 upregulated genes (0.36％ of the WT),of which approximately 80％were unique to the ERL + CDODA-Me group.Synergistic effects centered on losses to cell cycle pro-gression transcripts,a reduction of minichromosome maintenance complex components (MCM2-7),all key components of the Cdc45·MCM2-7GINS (CMG) complex,and replicative helicases;these effects were tantamount to the upregulation of processes associated with the nuclear factor erythroid 2 like 2 translational response to oxidative stress,including sulfiredoxin 1,heme oxygenase 1,and stress-induced growth inhibitor 1.Collectively,these findings indicate that the synergistic therapeutic effects of ERL +CDODA-Me on resistant NSCLC cells are mediated via the inhibition of mitosis and induction of oxidative stress.