Synthesis of Topological Gels by Penetrating Polymerization Using a Molecular Net.

Topological gels possess structures that are cross-linked only via physical constraints; ideally, no attractive intermolecular interactions act between their components, which yields interesting physical properties. However, most reported previous topological gels were synthesized based on supramolecular interlocked structures such as polyrotaxane, for which attractive intermolecular interactions are essential. Here, we synthesize a water-soluble "molecular net" (MN) with a large molecular weight and three-dimensional network structure using poly(ethylene glycol). When a water-soluble monomer (N-isopropylacrylamide) is polymerized in the presence of the MNs, the extending polymer chains penetrates the MNs to form an ideal topological MN gel with no specific attractive interactions between its components. The MN gels show unique physical properties as well a significantly high degree of swelling and high extensibility due to slipping of the physical cross-linking. We postulate this method to yield a new paradigm in gel science with unprecedented physical properties.

Cellular therapy for myocardial ischemia using a temperature-responsive biodegradable injectable polymer system with adipose-derived stem cells.

Adipose-derived stem cell (AdSC) has been attracting attention as a convenient stem cell source. Not only AdSC can differentiate into various tissue cells, but it can also accelerate cell proliferation, anti-inflammation, and angiogenesis by secreting paracrine factors. Studies have demonstrated AdSC treatment of ischemic heart. However, an improvement in the remaining live AdSCs administered at the injected site while maintaining paracrine factor secretion is desired to achieve effective regenerative medicine. We previously reported the ABA-type tri-block copolymer of poly(ɛ-caprolactone-co-glycolic acid) and poly(ethylene glycol) (tri-PCG), exhibiting temperature-responsive sol-to-gel transition as biodegradable injectable polymer (IP) systems. Moreover, we recently reported that the biodegradable temperature-triggered chemically cross-linked gelation systems exhibited longer gel state durations using tri-PCG attaching acryloyl groups and a polythiol derivative. In this study, we explored this IP-mediated AdSC delivery system. We investigated the cell viability, mRNA expression, and cytokine secretion of AdSCs cultured in the physical or chemical IP hydrogels. Both of these IP hydrogels retained a certain number of viable cells, and RT-PCR and ELISA analyses revealed that mRNA expression and secretion of vascular endothelial growth factor of the AdSCs cultured in the chemical hydrogel were higher than the physical hydrogel. Moreover, AdSCs injected with the chemical hydrogel into ischemic heart model mice showed longer retention of the cells at the injected site and recovery from the ischemic condition. The results mean that the IP system is a promising candidate for a stem cell delivery system that exhibits the recovery of cardiac function for myocardial infarction treatment.

Versatile Cell-Specific Ligand Arrangement System onto Desired Compartments of Biodegradable Matrices for Site-Selective Cell Adhesion Using DNA Tags.

A promising approach for the regeneration of tissues or organs with three-dimensional hierarchical structures is the preparation of scaffold-cell complexes that mimic these hierarchical structures. This requires an effective technique for immobilizing cell-specific ligands at arbitrarily chosen positions on matrices. Here, we report a versatile system for arranging cell-specific ligands onto desired compartments of biodegradable matrices for site-selective cell arrangement. We utilized the specific binding abilities of specific DNAs, immobilizing them as tags to arrange cell-recognition ligands at desired areas of the matrices by specific binding with cell-recognition ligand-DNA conjugates. We synthesized poly(l-lactide) (PLLA), a biodegradable polymer, with an oligo-DNA (trimer of deoxyguanosine: dG3) attached via a poly(ethylene glycol) (PEG) spacer to generate dG3-PEG-b-PLLA. The peptides Arg-Gly-Asp-Ser (RGDS) and Arg-Glu-Asp-Val (REDV) were chosen as cell-recognition ligands and were attached to an adapter DNA (aDNA), which can specifically bind to the dG3 moiety through G-quadruplex formation. The obtained dG3-PEG-b-PLLA was deposited on a small spot of the PLLA film, and the aDNA-RGDS or aDNA-REDV conjugate was added on the film to immobilize these ligands at the spot. We confirmed the specific adhesion of L929 cells (a mouse fibroblast cell line) and human umbilical vein endothelial cells (HUVECs) on the small areas coated with dG3-PEG-b-PLLA in the presence of aDNA-RGDS and aDNA-REDV, respectively, even after applying shear stress by flowing medium across the spot. Cell-specific attachment of the target cells was effectively achieved in a spatially controlled manner. This technique has the potential for the construction of cell-scaffold complexes that mimic the hierarchical structures of natural organs and may represent a breakthrough in realizing regenerative medicine and tissue engineering of complex organs.

Artificial Smooth Muscle Model Composed of Hierarchically Ordered Microtubule Asters Mediated by DNA Origami Nanostructures.

DNA has been well-known for its applications in programmable self-assembly of materials. Nonetheless, utility of DNA origami, which offers more opportunity to realize complicated operations, has been very limited. Here we report self-assembly of a biomolecular motor system, microtubule-kinesin mediated by DNA origami nanostructures. We demonstrate that a rodlike DNA origami motif facilitates self-assembly of microtubules into asters. A smooth-muscle like molecular contraction system has also been realized using the DNA origami in which self-assembled microtubules exhibited fast and dynamic contraction in the presence of kinesins through an energy dissipative process. This work provides potential nanotechnological applications of DNA and biomolecular motor proteins.

"DNA Origami Traffic Lights" with a Split Aptamer Sensor for a Bicolor Fluorescence Readout.

A split aptamer for adenosine triphosphate (ATP) was embedded as a recognition unit into two levers of a nanomechanical DNA origami construct by extension and modification of selected staple strands. An additional optical module in the stem of the split aptamer comprised two different cyanine-styryl dyes that underwent an energy transfer from green (donor) to red (acceptor) emission if two ATP molecules were bound as target molecule to the recognition module and thereby brought the dyes in close proximity. As a result, the ATP as a target triggered the DNA origami shape transition and yielded a fluorescence color change from green to red as readout. Conventional atomic force microscopy (AFM) images confirmed the topology change from the open form of the DNA origami in the absence of ATP into the closed form in the presence of the target molecule. The obtained closed/open ratios in the absence and presence of target molecules tracked well with the fluorescence color ratios and thereby validated the bicolor fluorescence readout. The correct positioning of the split aptamer as the functional unit farthest away from the fulcrum of the DNA origami was crucial for the aptasensing by fluorescence readout. The fluorescence color change allowed additionally to follow the topology change of the DNA origami aptasensor in real time in solution. The concepts of fluorescence energy transfer for bicolor readout in a split aptamer in solution, and AFM on surfaces, were successfully combined in a single DNA origami construct to obtain a bimodal readout. These results are important for future custom DNA devices for chemical-biological and bioanalytical purposes because they are not only working as simple aptamers but are also visible by AFM on the single-molecule level.

Preparation of Biodegradable Oligo(lactide)s-Grafted Dextran Nanogels for Efficient Drug Delivery by Controlling Intracellular Traffic.

Nanogels, nanometer-sized hydrogel particles, have great potential as drug delivery carriers. To achieve effective drug delivery to the active sites in a cell, control of intracellular traffic is important. In this study, we prepared nanogels composed of dextran with oligolactide (OLA) chains attached via disulfide bonds (Dex-g-SS-OLA) that collapse under the reductive conditions of the cytosol to achieve efficient drug delivery. In addition, we introduced galactose (Gal) residues on the nanogels, to enhance cellular uptake by receptor-mediated endocytosis, and secondary oligo-amine (tetraethylenepentamine) groups, to aid in escape from endosomes via proton sponge effects. The obtained Dex-g-SS-OLA with attached Gal residues and tetraethylenepentamine (EI4) groups, EI4/Gal-Dex-g-SS-OLA, formed a nanogel with a hydrodynamic diameter of ca. 203 nm in phosphate-buffered solution. The collapse of the EI4/Gal-Dex-g-SS-OLA nanogels under reductive conditions was confirmed by a decrease in the hydrodynamic diameter in the presence of reductive agents. The specific uptake of the hydrogels into HepG2 cells and their intercellular behavior were investigated by flow cytometry and confocal laser scanning microscopy using fluorescence dye-labeled nanogels. Escape from the endosome and subsequent collapse in the cytosol of the EI4/Gal-Dex-g-SS-OLA were observed. These biodegradable nanogels that collapse under reductive conditions in the cytosol should have great potential as efficient drug carriers in, for example, cancer chemotherapy.

Crosslinked duplex DNA nanogels that target specified proteins.

Specific detection of protein biomarkers plays an important role in diagnostics and therapeutics. We have fabricated polymeric nanogels, which can specifically interact with the cancer biomarker thrombin to serve as a model. Two types of 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymers bearing a thrombin-binding oligonucleotide aptamer and its complementary chain were independently synthesized by redox-initiated radical polymerization. These MPC polymers associate in a complimentary fashion due to double strand formation of the oligonucleotides in aqueous media, leading to the spontaneous formation of spherical nanogels. Nanogel formation was confirmed by dynamic light scattering (DLS) and transmittance microscopy. The average size of nanogel particles was 124 ± 2 nm and the nanogels were mono-dispersed (polydispersity index 0.21). Functional intercalators could be stably incorporated into nanogels through the physical interaction between the intercalators and the oligonucleotides. The ethidium bromide (EtBr)-incorporating nanogels were used as detectors for thrombin. The fluorescence intensity of solutions containing the EtBr-incorporating nanogels was decreased with an increase in the concentration of thrombin. The transformation of quadruplex-thrombin structure from complementary double-stranded structures resulted in the decrease in fluorescence intensity. In contrast, the intensity did not change when the nanogels were incubated with albumin. Thrombin is only one such model used to demonstrate this technique; oligonucleotide aptamers can be freely designed to interact with versatile bio-substances. Therefore, aptamer-crosslinked nanogels can be appropriate nanomaterials for disease diagnosis and therapy.

Nanomechanical molecular devices made of DNA origami.

CONSPECTUS: Eight years have passed since the striking debut of the DNA origami technique ( Rothemund, P. W. K. Nature 2006 , 440 , 297 - 302 ), in which long single-stranded DNA is folded into a designed nanostructure, in either 2D or 3D, with the aid of many short staple strands. The number of proposals for new design principles for DNA origami structures seems to have already reached a peak. It is apparent that DNA origami study is now entering the second phase of creating practical applications. The development of functional nanomechanical molecular devices using the DNA origami technique is one such application attracting significant interest from researchers in the field. Nanomechanical DNA origami devices, which maintain the characteristics of DNA origami structures, have various advantages over conventional DNA nanomachines. Comparatively high assembly yield, relatively large size visible via atomic force microscopy (AFM) or transmission electron microscopy (TEM), and the capability to assemble multiple functional groups with precision using multiple staple strands are some of the advantages of the DNA origami technique for constructing sophisticated molecular devices. This Account describes the recent developments of such nanomechanical DNA origami devices and reviews the emerging target of DNA origami studies. First, simple "dynamic" DNA origami structures with transformation capability, such as DNA origami boxes and a DNA origami hatch with structure control, are briefly summarized. More elaborate nanomechanical DNA origami devices are then reviewed. The first example describes DNA origami pinching devices that can be used as "single-molecule" beacons to detect a variety of biorelated molecules, from metal ions at the size of a few tens of atomic mass number units to relatively gigantic proteins with a molecular mass greater than a hundred kilodaltons, all on a single platform. Clamshell-like DNA nanorobots equipped with logic gates can discriminate different cell lines, open their shell, and bind to their target. An intelligent DNA origami "sheath" can mimic the function of suppressors in a transcription regulation system to control the expression of a loaded gene. DNA origami "rolls" are created to construct precisely arranged plasmonic devices with metal nanoparticles. All of their functions are derived from their nanomechanical movement, which is programmable by designing the DNA sequence or by using the significant repository of technical achievements in nucleic acid chemistry. Finally, some studies on detailed structural parameters of DNA origami or their mechanical properties in nanoscale are discussed, which may be useful and inspiring for readers who intend to design new nanomechanical DNA origami devices.

Precise structure control of three-state nanomechanical DNA origami devices.

Precise structure switching between all of the three forms of three-state nanomechanical DNA origami devices has been accomplished. A nanomechanical DNA origami device called DNA origami pliers, which consists of two levers of 170-nm long, 20-nm wide, and 2-nm thick connected at a Holliday-junction fulcrum, takes three conformations: closed parallel, closed antiparallel, and open cross forms. They were previously applied to construct detection systems for biomolecules in single-molecular resolution by observing the structure switching between cross form and one of the other two forms under atomic force microscope (AFM). We redesigned DNA origami pliers in this study to let them freely switch between all of the three states including parallel-antiparallel direct switching without taking cross form. By the addition of appropriate switcher strands to the solution, hybridization and dehybridization of particular binder strands that fix the levers into predetermined state were selectively triggered as programmed in their sequence. Circuit structure switching through all of the three states in both of the two opposite direction was even successful with the new design.

Nanomechanical DNA origami pH sensors.

Single-molecule pH sensors have been developed by utilizing molecular imaging of pH-responsive shape transition of nanomechanical DNA origami devices with atomic force microscopy (AFM). Short DNA fragments that can form i-motifs were introduced to nanomechanical DNA origami devices with pliers-like shape (DNA Origami Pliers), which consist of two levers of 170-nm long and 20-nm wide connected at a Holliday-junction fulcrum. DNA Origami Pliers can be observed as in three distinct forms; cross, antiparallel and parallel forms, and cross form is the dominant species when no additional interaction is introduced to DNA Origami Pliers. Introduction of nine pairs of 12-mer sequence (5'-AACCCCAACCCC-3'), which dimerize into i-motif quadruplexes upon protonation of cytosine, drives transition of DNA Origami Pliers from open cross form into closed parallel form under acidic conditions. Such pH-dependent transition was clearly imaged on mica in molecular resolution by AFM, showing potential application of the system to single-molecular pH sensors.

Gelation upon the Mixing of Amphiphilic Graft and Triblock Copolymers Containing Enantiomeric Polylactide Segments through Stereocomplex Formation.

Biodegradable injectable polymer (IP) systems that form hydrogels in situ when injected into the body have considerable potential as medical materials. In this paper, we report a new two-solution mixed biodegradable IP system that utilizes the stereocomplex (SC) formation of poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA). We synthesized triblock copolymers of PLLA and poly(ethylene glycol), PLLA-b-PEG-b-PLLA (tri-L), and a graft copolymer of dextran (Dex) attached to a PDLA-b-PEG diblock copolymer, Dex-g-(PDLA-b-PEG) (gb-D). We found that a hydrogel can be obtained by mixing gb-D solution and tri-L solution via SC formation. Although it is already known that graft copolymers attached to enantiomeric PLLA and PDLA chains can form an SC hydrogel upon mixing, we revealed that hydrogels can also be formed by a combination of graft and triblock copolymers. In this system (graft vs. triblock), the gelation time was shorter, within 1 min, and the physical strength of the resulting hydrogel (G' > 100 Pa) was higher than when graft copolymers were mixed. Triblock copolymers form micelles (16 nm in diameter) in aqueous solutions and hydrophobic drugs can be easily encapsulated in micelles. In contrast, graft copolymers have the advantage that their molecular weight can be set high, contributing to improved mechanical strength of the obtained hydrogel. Various biologically active polymers can be used as the main chains of graft copolymers, and chemical modification using the remaining functional side chain groups is also easy. Therefore, the developed mixing system with a graft vs. triblock combination can be applied to medical materials as a highly convenient, physically cross-linked IP system.

Development of immune cell delivery system using biodegradable injectable polymers for cancer immunotherapy.

Immune cell delivery using injectable hydrogel attracts much attention for improving its therapeutic effect. Specifically, dendritic cells (DCs) are the trigger cells for immune responses, and DC vaccines are studied for improving cancer immunotherapy. Hydrogel-assisted cell delivery is expected to enhance the viability of the implanted cells. We recently reported temperature-responsive biodegradable injectable polymer (IP) formulation utilizing poly(ε-caprolactone-co-glycolide)-b-poly(ethylene glycol)(PEG)-b-poly(ε-caprolactone-co-glycolide) (tri-PCG). Tri-PCG-based IP was reported to exhibit immediate sol-to-gel transition in response to temperature increase, in vivo biodegradability, and excellent biocompatibility. In this study, tri-PCG-based IP was applied to DC delivery. IP encapsulated live DCs, and the DCs incorporated ovalbumin (OVA) as a model antigen and CpG-DNA (oligo DNA with adjuvant effect) in IP hydrogel. Results suggested that DCs encapsulated in IP hydrogel internalized OVA and CpG-DNA and DCs were maturated to present antigens to T cells. Moreover, subcutaneously injected tri-PCG-based IP prolonged the retention period of cell accumulation at injected sites. Tri-PCG IP hydrogel could release matured DCs as the degradation of the hydrogel progressed. Tri-PCG IP formulation improved treatment efficacy of OVA transfected mouse lymphoma (E.G7-OVA) tumor. Hence, tri-PCG IP is a promising platform for immune cell delivery.

Supramolecular enzyme-mimicking catalysts self-assembled from peptides.

Natural enzymes catalyze biochemical transformations in superior catalytic efficiency and remarkable substrate specificity. The excellent catalytic repertoire of enzymes is attributed to the sophisticated chemical structures of their active sites, as a result of billions-of-years natural evolution. However, large-scale practical applications of natural enzymes are restricted due to their poor stability, difficulty in modification, and high costs of production. One viable solution is to fabricate supramolecular catalysts with enzyme-mimetic active sites. In this review, we introduce the principles and strategies of designing peptide-based artificial enzymes which display catalytic activities similar to those of natural enzymes, such as aldolases, laccases, peroxidases, and hydrolases (mainly the esterases and phosphatases). We also discuss some multifunctional enzyme-mimicking systems which are capable of catalyzing orthogonal or cascade reactions. We highlight the relationship between structures of enzyme-like active sites and the catalytic properties, as well as the significance of these studies from an evolutionary point of view.

Drug Delivery with Hyaluronic Acid-Coated Polymeric Micelles in Liver Fibrosis Therapy.

Developing delivery vehicles that achieve drug accumulation in the liver and transferability into hepatic stellate cells (HSCs) across the liver sinusoidal endothelium is essential to establish a treatment for hepatic fibrosis. We previously developed hyaluronic acid (HA)-coated polymeric micelles that exhibited affinity to liver sinusoidal endothelial cells. HA-coated micelles possess a core-shell structure of self-assembled biodegradable poly(l-lysine)-b-poly(lactic acid) AB-diblock copolymer (PLys+-b-PLLA), and its exterior is coated with HA through polyion complex formation via electrostatic interaction between anionic HAs and cationic PLys segments. In this study, we prepared HA-coated micelles entrapping olmesartan medoxomil (OLM), an anti-fibrotic drug, and evaluated their possibility as drug delivery vehicles. HA-coated micelles exhibited specific cellular uptake into LX-2 cells (human HSC line) in vitro. In vivo imaging analysis after intravenous (i.v.) injection of HA-coated micelles into mice revealed that the micelles exhibited high accumulation in the liver. Observation of mouse liver tissue sections suggested that HA-coated micelles were distributed in liver tissue. Furthermore, i.v. injection of HA-coated micelles entrapping OLM showed a remarkable anti-fibrotic effect against the liver cirrhosis mouse model. Therefore, HA-coated micelles are promising candidates as drug delivery vehicles for the clinical management of liver fibrosis.

Formation of 1D and 2D gold nanoparticle arrays by divalent DNA-gold nanoparticle conjugates.

Divalent DNA-AuNP (gold nanoparticle) conjugates comprising two DNA strands at diametrically opposed positions are prepared. Highly linear 1D and tetragonal lattice-like 2D AuNP arrays are constructed using the conjugates and DNA assemblies based on T- and double-crossover motifs and the Holliday junction.

Preparation of hyaluronic acid-coated polymeric micelles for nasal vaccine delivery.

Hyaluronic acid (HA)-coated biodegradable polymeric micelles were developed as nanoparticulate vaccine delivery systems to establish an effective nasal vaccine. We previously reported HA-coated micelles prepared by forming a polyion complex (PIC) of poly(L-lysine)-b-polylactide (PLys+-b-PLA) micelles and HA. The HA-coated micelles exhibited specific accumulation in HA receptor-expressing cells and extremely high colloidal stability under diluted blood conditions. In this study, a model antigen, ovalbumin (OVA), and an adjuvant oligonucleotide containing the CG motif (CpG-DNA) were efficiently loaded in HA-coated micelles via electrostatic interactions. HA-coated micelles delivered OVA and CpG-DNA in mouse bone marrow-derived dendritic cells (BMDCs) and resulted in the upregulation of mRNA encoding IFN-γ and IL-4 in BMDCs. In addition, HA-coated micelles enhanced the expression of the major histocompatibility complex (MHC) class II on BMDCs. We investigated the immune response of HA-coated micelles following intranasal administration. HA-coated micelles induced higher OVA-specific IgG in the blood and OVA-specific IgA in the nasal wash than control (carboxymethyl dextran-coated) micelles. These results suggest that HA-coated micelles efficiently deliver antigens and adjuvants to mucosal-resident immune cells. Therefore, HA-coated micelles are promising platforms for developing nasal vaccines against infectious diseases.

Enzyme treatment-free and ligation-independent cloning using caged primers in polymerase chain reactions.

A new simple scheme for constructing recombinant vectors that does not require any restriction enzyme, ligase, or any other special enzyme treatment has been developed. By using caged primers in PCR, unnatural sticky-ends of any sequence, which are sufficiently long for ligation-independent cloning (LIC), are directly prepared on the product after a brief UVA irradiation. Target genes and vectors amplified by this light-assisted cohesive-ending (LACE) PCR join together in the desired arrangement in a simple mixture of them, tightly enough to be repaired and ligated in competent cells.

Temperature-responsive biodegradable injectable polymers with tissue adhesive properties.

Injectable polymers (IPs) exhibiting in situ hydrogel formation have attracted attention as vascular embolization and postoperative adhesion prevention materials. While utilizing hydrogels for such purposes, it is essential to ensure that they have appropriate and controllable tissue adhesion property, as it is crucial for them to not detach from their deposited location in the blood vessel or abdominal cavity. Additionally, it is important to maintain gel state in vivo for the desired period at such locations, where large amounts of body fluid exist. We had previously reported on a biodegradable IP system exhibiting temperature-responsive gelation and subsequent covalent cross-link formation. We had utilized triblock copolymers of aliphatic polyester and poly(ethylene glycol) (tri-PCGs) and its derivative containing acrylate group at the termini (tri-PCG-Acryl), exhibiting a longer and more controllable duration time of the gel state. In this study, the introduction of aldehyde groups by the addition of aldehyde-modified Pluronic (PL-CHO) was performed for conferring controllable and appropriate tissue adhesive properties on these IP systems. The IP systems containing PL-CHO, which were not covalently incorporated into the hydrogel network, exhibited tissue adhesive properties through Schiff base formation. The adhesion strength could be controlled by the amount of PL-CHO added. The IP system showed good vascular embolization performance and pressure resistance in the blood vessels. The IP hydrogel remained at the administration site in the abdominal space for 2 days and displayed effective adhesion prevention performance. STATEMENT OF SIGNIFICANCE: Injectable polymers (IPs), which exhibit in situ hydrogel formation, are expected to be utilized as vascular embolization and postoperative adhesion prevention materials. The tissue adhesion properties of hydrogels are important for such applications. We succeeded in conferring tissue adhesion properties onto a previously reported IP system by mixing it with Pluronic modified with aldehyde groups (PL-CHO). The aldehyde groups allowed for the formation of Schiff bases at the tissue surfaces. The tissue adhesion property could be conveniently controlled by altering the amount of PL-CHO. We revealed that the in vitro embolization properties of IPs in blood vessels could be substantially improved by mixing with PL-CHO. The IP system containing PL-CHO also exhibited good in vivo performance for postoperative adhesion prevention.

Postoperative Adhesion Prevention Using a Biodegradable Temperature-Responsive Injectable Polymer System and Concomitant Effects of the Chymase Inhibitor.

Postoperative adhesion remains a problem in surgery and causes postoperative complications. Laparoscopic surgery is now common, making it increasingly important to develop injectable formulations of adhesion barriers that can be applied during such surgeries. Temperature-responsive injectable polymer (IP) systems exhibiting a sol-to-gel transition in response to temperature are promising candidates as effective adhesion barriers that can be applied conveniently during laparoscopic surgery. We previously developed IP systems exhibiting temperature-responsive irreversible gelation based on a triblock copolymer of poly(ε-caprolactone-co-glycolic acid) (PCGA) and poly(ethylene glycol) (PEG) (PCGA-b-PEG-b-PCGA: tri-PCG) and a tri-PCG derivative with acrylate groups at the termini (tri-PCG-acryl). A mixture of tri-PCG-acryl micelle solution and tri-PCG micelle solution containing polythiol exhibited an irreversible sol-to-gel transition in response to a temperature increase. The gel contains partial covalent cross-linking, and the degradation and physical properties of these IP hydrogels can easily be controlled by changing the mixing ratio of tri-PCG-acryl in the formulation. In this study, we investigated the effect of physical properties of the IP hydrogel on the efficacy of adhesion prevention using our IP system containing various amounts of tri-PCG-acryl. Our results show that an IP system with lower physical strength and rapid degradation reduces adhesion more effectively. Chymase plays a crucial role in exacerbating adhesion formation, and a peptide derivative-type chymase inhibitor (CI), Suc-Val-Pro-PheP(OPh)2, was previously reported to prevent adhesion. We thus investigated the concomitant use of this CI with our IP system using two methods: separate administration of the CI and IP and entrapping the CI in the IP hydrogel. IP systems with separately administrated CI provided better results than the administration of an IP system entrapping the CI or sole IP systems. These findings suggest that the pharmacological effect of the CI and a physical barrier generated by our IP system effectively prevents adhesion.

Reactive-Oxygen-Species-Mediated Surface Oxidation of Single-Molecule DNA Origami by an Atomic Force Microscope Tip-Mounted C60 Photocatalyst.

A tripod molecule incorporating a C60 photocatalyst into a rigid scaffold with disulfide legs was designed and synthesized for the stable and robust attachment of C60 onto an Au-coated atomic force microscope (AFM) tip. The "tripod-C60" was immobilized onto the tip by forming S-Au bonds in the desired orientation and a dispersed manner, rendering it suitable for the oxidation and scission of single molecules on a countersurface, thereby functioning as "molecular shears". A DNA origami with a well-defined structure was chosen as the substrate for the tip-induced oxidation. The gold-coated, C60-functionalized AFM tip was used for both AFM imaging and oxidation of DNA origami upon visible-light irradiation. The localized and temporally controlled oxidative damage of DNA origami was successfully performed at the single-molecule level via singlet-oxygen (1O2) generation from the immobilized C60 on the AFM tip. This oxidative damage to DNA origami can be carried out under ambient conditions in a fluid cell at room temperature, rendering it well-suited for the manipulation of a variety of species on surfaces via a spatially and temporally controlled oxidation reaction triggered by 1O2 locally generated from the immobilized C60 on the AFM tip.