Optimal intersurface stability for unicompartmental femoral component design with two pegs placed on the distal resection surface: 5 mm peg length increment and 10° peg inclination.

PURPOSE: The present study aimed to identify the optimal design of the unicompartmental femoral component through parameter analysis and stability evaluation. METHODS: A finite element (FE) analysis was applied to analyse and adjust the parameter combinations of the anterior tilt angle of the posterior condyle resection surface, the position of the peg, the length of the peg and the inclination angle of the peg, resulting in 10 different FE models. Setting three knee flexion angles of 8.4° (maximum load state during walking), 40° (maximum load state during stair climbing) and 90° (maximum load state during squatting exercise), quantitatively analysing the micromotion values of the bone-prosthesis interface and defining a weighted scoring formula to evaluate the stability of different FE models. The validity of the FE analysis was verified using the Digital Image Correlation (DIC) device. RESULTS: The errors between the FE analysis and the DIC test at three flexion angles were 5.6%, 1.7% and 11.1%. The 10 different femoral component design models were measured separately. The FE analysis demonstrated that the design with a 0° anterior tilt angle of the posterior condyle resection surface, both pegs placed on the distal resection surface, lengthened 5 mm pegs and a 10° peg inclination angle provided the best stability. CONCLUSION: The current study proposed a method for evaluating the stability of the femoral component design. The optimal intersurface stability design of the unicompartmental femoral component was achieved with two pegs placed on the distal resection surface, a 5-mm peg length increment and a 10° peg inclination. These results might provide a reference for the selection of unicompartmental femoral components in clinical practice and therefore improve the survival rate of future unicompartmental knee arthroplasty. LEVEL OF EVIDENCE: Level III.

Significant race and gender differences in anterior cruciate ligament tibial footprint location: a 3D-based analysis.

BACKGROUND: The aim of the present study was to identify potential race- or gender-specific differences in anterior cruciate ligament (ACL) tibial footprint location from the tibia anatomical coordinate system (tACS) origin, investigate the distances from the tibial footprint to the anterior root of the lateral meniscus (ARLM) and the medial tibial spine (MTS), determine how reliable the ARLM and MTS can be in locating the ACL tibial footprint, and assess the risk of iatrogenic ARLM injuries caused by using reamers with various diameters (7-10 mm). PATIENTS AND METHODS: Magnetic resonance images of 91 Chinese and 91 Caucasian subjects were used for the reconstruction of three-dimensional (3D) tibial and ACL tibial footprint models. The anatomical coordinate system was applied to reflect the anatomical locations of scanned samples. RESULTS: The average anteroposterior (A/P) tibial footprint location was 17.1 ± 2.3 mm and 20.0 ± 3.4 mm in Chinese and Caucasians, respectively (P < .001). The average mediolateral (M/L) tibial footprint location was 34.2 ± 2.4 mm and 37.4 ± 3.6 mm in Chinese and Caucasians, respectively (P < .001). The average difference between men and women was 2 mm in Chinese and 3.1 mm in Caucasians. The safe zone for tibial tunnel reaming to avoid ARLM injury was 2.2 mm and 1.9 mm away from the central tibial footprint in the Chinese and Caucasians, respectively. The probability of damaging the ARLM by using reamers with various diameters ranged from 0% for Chinese males with a 7 mm reamer to 30% in Caucasian females with a 10 mm reamer. CONCLUSIONS: The significant race- and gender-specific differences in the ACL tibial footprint should be taken in consideration during anatomic ACL reconstruction. The ARLM and MTS are reliable intraoperative landmarks for identifying the tibial ACL footprint. Caucasians and females might be more prone to iatrogenic ARLM injury. LEVEL OF EVIDENCE: III, cohort study. TRIAL REGISTRATION: This study has been approved by the ethical research committee of the General Hospital of Southern Theater Command of PLA under the code: [2019] No.10.

The Influence of Age on Sensitivity to Dexmedetomidine Sedation During Spinal Anesthesia in Lower Limb Orthopedic Surgery.

To investigate the influence of age on sensitivity to dexmedetomidine sedation in adult patients, we selected 79 patients scheduled for lower limb orthopedic surgery under spinal anesthesia to identify the dexmedetomidine ED50 for adequate sedation among different age groups. After a spinal anesthetic was placed, a dose of dexmedetomidine determined by the Dixon up-and-down method was administered over 15 minutes. The ED50 in the elderly group was lower than in the other 2 groups (elderly: 0.88 ± 0.07; middle aged: 1.16 ± 0.08; young: 1.21 ± 0.06 µg/kg; both P < .001). There was no difference between the young and middle-aged groups (P = .160).

Prediction of in vivo knee joint kinematics using a combined dual fluoroscopy imaging and statistical shape modeling technique.

Using computed tomography (CT) or magnetic resonance (MR) images to construct 3D knee models has been widely used in biomedical engineering research. Statistical shape modeling (SSM) method is an alternative way to provide a fast, cost-efficient, and subject-specific knee modeling technique. This study was aimed to evaluate the feasibility of using a combined dual-fluoroscopic imaging system (DFIS) and SSM method to investigate in vivo knee kinematics. Three subjects were studied during a treadmill walking. The data were compared with the kinematics obtained using a CT-based modeling technique. Geometric root-mean-square (RMS) errors between the knee models constructed using the SSM and CT-based modeling techniques were 1.16 mm and 1.40 mm for the femur and tibia, respectively. For the kinematics of the knee during the treadmill gait, the SSM model can predict the knee kinematics with RMS errors within 3.3 deg for rotation and within 2.4 mm for translation throughout the stance phase of the gait cycle compared with those obtained using the CT-based knee models. The data indicated that the combined DFIS and SSM technique could be used for quick evaluation of knee joint kinematics.

Morphological measurement of the knee: race and sex effects.

Three-dimensional knee models of 148 Chinese (61 males, 87 female) and of 127 Caucasian (79 male, 48 female) were constructed. The anteroposterior (fAP, tAP) and mediolateral (fML, tML) dimensions of cross-section of the femur and tibia after simulated TKA bony resection were measured. Females have smaller femoral aspect ratios (fML/fAP) than males (Chinese: 1.22 +/- 0.05 vs 1.29 +/- 0.04; Caucasians: 1.18 +/- 0.05 vs 1.25 +/- 0.05) (P < 0.05). The tibial aspect ratios (tML/tAP) of the Chinese males (1.56 +/- 0.07) and the Caucasian females (1.54 +/- 0.07) are smaller than that of the Caucasian males (1.61 +/- 0.08) (P < 0.05). In regression analysis, for the same fAP or tAP dimension, females have narrower femoral condyles or tibia platforms than males; the Caucasian males have narrower femoral condyle or wider tibial platform than the Chinese males. For the same fAP dimension, males have lager tibial platforms than females; the Chinese males have larger tibial platforms than the Caucasian males. Racial and sex differences of the resected femur and tibia surfaces were found between a Chinese population and a Caucasian population. The relationship between the femur and tibia also showed racial and sex differences. These results may provide guidelines for future development of sex-specific as well as race-specific total knee replacement surgeries.

Race and Gender Differences in Anterior Cruciate Ligament Femoral Footprint Location and Orientation: A 3D-MRI Study.

OBJECTIVE: The femoral tunnel position is crucial to anatomic single-bundle anterior cruciate ligament (ACL) reconstruction, but the ideal femoral footprint position are mostly based on small-sized cadaveric studies and elderly patients with a single ethnic background. This study aimed to identify potential race- or gender-specific differences in the ACL femoral footprint location and ACL orientation, determine the correlation between the ACL orientation and the femoral footprint location. METHODS: Magnetic resonance images (MRIs) of 90 Caucasian participants and 90 matched Chinese subjects were used for reconstruction of three-dimensional (3D) femur and tibial models. ACL footprints were sketched by several experienced orthopedic surgeons on the MRI photographs. The anatomical coordinate system was applied to reflect the ACL footprint location and orientation of scanned samples. The femoral ACL footprint locations were represented by their distance from the origin in the anteroposterior (A/P) and distal-proximal (D/P) directions. The orientation of the ACL was described with the sagittal, coronal and transverse deviation angles. The ACL orientation and femoral footprint position were compared by the two-sided t-test. Multiple regression analysis was used to study the correlation between the orientation and femoral footprint position. RESULTS: The average femur footprint A/P position was -6.6 ± 1.6 mm in the Chinese group and -5.1 ± 2.3 mm in the Caucasian group, (p < 0.001). The average femur footprint D/P position was -2.8 ± 2.4 mm in Chinese and - 3.9 ± 2.0 mm in Caucasians, (p = 0.001). The Chinese group had a mean difference of a 1.5 mm (6.1%) more posterior and 1.1 mm (5.3%) more proximal in the position from the flexion-extension axis (FEA). And the males have a sagittal plane elevation about 4-5° higher than females in both racial groups. Furthermore, for every 1% (0.40 mm) increase in A/P and D/P values, the sagittal angle decreased by about 0.12° and 0.24°, respectively; the coronal angle decreased by about 0.10° and 0.30°, respectively. For every 1% (0.40 mm) increase in D/P value, the transverse angle increased by about 0.14°. CONCLUSION: The significant race- and gender-specific differences in the femoral footprint and orientation of the ACL should be taken in consideration during anatomic single-bundle ACL reconstruction. Furthermore, the quantitative relationship between the ACL orientation and the footprint location might provide some reference for surgeons to develop a surgical strategy in ACL single-bundle reconstruction and revision.

Factors influencing the posterior cruciate ligament buckling phenomenon-a multiple linear regression analysis of bony and soft tissue structures of the knee joint.

PURPOSE: To determine whether posterior cruciate ligament (PCL) buckling (angular change) is associated with anterior cruciate ligament (ACL) status (intact or ruptured), meniscal bone angle (MBA), anterior tibial translation (ATT), body weight, femoral-tibial rotation (FTR), posterior tibial slope (PTS), PCL length and femoral-tibial distance (FTD) and to identify the factors that have the greatest influence. METHODS: All enrolled participants were scanned with a 3.0 T, 8-channel coil MRI system (Magnetom Verio; Siemens). Bone and soft tissue parameters were measured by MIMICS software for each subject and each measured parameter was correlated with PCL buckling phenomena. The correlated and statistically significant parameters were then analyzed by multiple linear regression to determine the magnitude of the effect of the different parameters on the PCL buckling phenomenon. RESULTS: A total of 116 subjects (50 ACL ruptured and 66 age, weight and height matched volunteers with uninjured knees) were enrolled. Among all measured parameters, there were 8 parameters that correlated with PCL angle (PCLA), of which ACL status had the strongest correlation with PCLA (r = - 0.67, p = < 0.001); and 7 parameters that correlated with PCL-posterior femoral cortex angle (PCL-PCA), of which ATT had the strongest correlation with PCL-PCA (r = 0.69, p = < 0.001). PCLIA was not significantly correlated with any of the measured parameters. Multiple linear regression analyses revealed four parameters can explain PCLA, of which ACL status had the strongest effect on PCLA (absolute value of standardized coefficient Beta was 0.508). Three parameters can explain PCL-PCA, of which ATT had the strongest effect on PCLIA (r = 0.69, p = < 0.001), ATT has the greatest effect on PCL-PCA (absolute value of normalized coefficient Beta is 0.523). CONCLUSIONS: PCLA may be a simple and easily reproducible and important supplement for the diagnosis of ACL injury; PCL-PCA is a simple and easily reproducible and important complementary tool for the detection of ATT. The use of PCLA is more recommended to aid in the diagnosis of ACL injury.

In the Acute Phase of Anterior Cruciate Ligament Rupture: Quantitative Assessment of Matrix Changes and Correlation between Different States of Meniscus and Adjacent Cartilage.

OBJECTIVE: Cartilage and meniscus are important structures that maintain the health of the knee joint. Early detection of changes in the internal components of cartilage and meniscus before morphological changes occur is essential to prevent and delay the development of osteoarthritis (OA). This study was designed to determine the changes in the matrix composition of morphologically intact cartilage and meniscus during the acute phase of an anterior cruciate ligament (ACL) rupture, as well as the effect of different states of meniscus (intact or tear) on adjacent cartilage during the acute phase. METHODS: This cross-sectional study compared and analyzed 50 patients in the acute phase of ACL rupture who underwent surgical treatment and 66 age-, weight- and height-matched healthy volunteers from May 2022 to May 2023 at our institution. Mean T2 relaxation times and effect sizes in different regions of tibiofemoral articular cartilage and meniscus were compared between the two groups using the Mann-Whitney nonparametric t-test, and correlations between different meniscal states and adjacent cartilage were analyzed. RESULTS: Both in the lateral and medial compartments of the knee, T2 relaxation times were significantly higher in all subregions of cartilage and meniscus in the ACL rupture group (p < 0.05), and the site of injury was predominantly centered in the medial compartment (femur, p = 0.000; tibia, p = 0.000; anterior horn, p = 0.000). In the respective compartments, the posterior horn of the lateral meniscus showed a significant positive correlation with the mid-cartilage of the femoral and tibial (r = 0.566, p = 0.035; r = 0.611, p = 0.02); and the posterior horn of the medial meniscus showed a significant positive correlation with the posterior tibial cartilage (r = 0.668, p = 0.018). CONCLUSION: During the acute phase of ACL rupture, the internal composition of the cartilage and meniscus undergoes significant changes, even if the morphology is intact. More importantly, the state of the meniscus significantly affects the internal composition of the adjacent cartilage. This is an early warning sign of OA, which should be closely monitored and carefully managed in clinical practice.

CT-Based Calculation Model Assists Precise Treatment for Anterior and Posterior Ankle Bony Impingement.

OBJECTIVE: Ankle arthroscope is the preferred tool for ankle surgeons to treat ankle impingement. However, there is no relevant report on how to improve the accuracy of arthroscopic osteotomy through preoperative planning. The aims of this study were to investigate a novel method to obtain the bone morphology in anterior and posterior ankle bony impingement through computed tomography (CT) calculation model, use this method to guide surgical decision-making, and compare the postoperative efficacy and actual bone cutting volume with conventional surgery. METHODS: This retrospective cohort study includes 32 consecutive cases with anterior and posterior ankle bony impingement by arthroscopy from January 2017 to December 2019. Mimics software was utilized to calculate the bony morphology and measure the volume of the osteophytes by two trained software engineers. The patients were divided into the precise group (n = 15) and the conventional group (n = 17) according to whether obtain and quantify the osteophytes' morphology with CT based calculation model preoperative. All patients were evaluated clinically using visual analog scale (VAS) score, American Orthopaedic Foot and Ankle Society (AOFAS) score, active dorsiflexion and plantarflexion angle before and after surgery at both 3 months and 12 months postoperatively. We obtained the shape and volume of bone cutting through Boolean calculation. Clinical outcomes and radiological data were compared between the two groups. RESULTS: The VAS score, AOFAS score, active dorsiflexion angle and plantarflexion angle were significantly improved in both groups postoperatively. In comparison of the VAS score, AOFAS score, and active dorsiflexion angle, the precise group were higher than the conventional group in the follow-up at 3 and 12 months postoperatively with statistical difference. The difference between the virtual bone cutting volume and the actual bone cutting volume of the anterior edge of distal tibia in the conventional group and precise group were 244.20 ± 147.66 mm3 and 76.53 ± 168.51 mm3 , respectively, there was statistical difference between the two groups (t = -2.927, p = 0.011). CONCLUSION: Using a novel method of obtaining and quantifying the bony morphology with CT-based calculation model for anterior and posterior ankle bony impingement can help guide surgical decision-making preoperatively and assist precise bone cutting during the operation, which can improve the efficacy and evaluate the accuracy of osteotomy postoperatively.

Relationships between position of patellar ridge high point and morphology of resected surface for patellar resurfacing in total knee arthroplasty.

Background: Reproducing the native patellar ridge high point while maximizing osseous coverage is important for the success of patellar replacement, but it cannot always be achieved simultaneously. This study aimed to thoroughly investigate the relationships and their influencing factors between the positions of the high point of patellar ridge (HPPR) and the morphology of the patellar resected surface. Methods: Four hundred seventy-three patients (265 men, 208 women) aged 18 to 50 years with knee injuries before arthroscopy were retrospectively collected for this cross-sectional study. Computed tomography (CT) and magnetic resonance imaging (MRI) were used to construct 3D computer models of the patella and patellar cartilage. The morphometric characteristics of the patellar cut after virtual resection and the HPPR position relative to the patellar cut centre were measured and analyzed. Results: The medial displacements of the HPPR were positively correlated with Wiberg's classification and index (all P<0.001). The mean values of HPPR's medial displacements were 0.15 of the medial width of patellar cut, and 93.2% of all patella ranged from 0 to 0.3. When the implant's apex were placed at 0.15 of the medial width of patellar cut medialized, the proportion of implant placement errors within 1 mm of the native high point was 12% more in female patella (P=0.01), and 7% more in all patella (P=0.03) than 3 mm medialized. Conclusions: Wiberg's system can roughly predicted the medial-lateral position of the HPPR. The HPPR was mainly medially located at the 0.15 of the medial patellar width approximately, and 15% medialized of the implant's apex can better reproduce the native patellar high point than 3 mm medialized. The current results provide basic data for patellar implant selection, preoperative planning, and implant design to reproduce the native patellar high point better while maximizing osseous coverage for patellar resurfacing.

Loaded open-kinetic-chain exercises stretch the anterior cruciate ligament more than closed-kinetic-chain exercises: In-vivo assessment of anterior cruciate ligament length change.

BACKGROUND: Usage of open-kinetic-chain (OKC) or closed-kinetic-chain (CKC) exercises during rehabilitation planning after anterior cruciate ligament (ACL) reconstruction has been debated for decades. However, the ACL elongation pattern during different rehabilitation exercises at different loadings remains unclear. OBJECTIVES: This study aimed to determine the effects of OKC and CKC exercises on the length of ACL anteromedial bundle (AMB) and posterolateral bundle (PLB) to provide biomechanical support for making rehabilitation schedules. DESIGN: Laboratory Descriptive Study. METHOD: Eighteen healthy volunteers were asked to perform two OKC motions, including non-weight-bearing and 10 kg loaded seated knee extension (OKC-0, OKC-10), as well as two CKC motions, including box squat (BS) and deep single-legged lunge (Lunge). Techniques of 2D-to-3D image registration and 3D ligament simulation were used to quantify length changes of ACL. RESULTS: The motion which led to the least and most ACL elongation were OKC-0 and OKC-10, respectively. The AMB and PLB were significantly longer in OKC-10 than those in OKC-0 during 0-60° and 0-55° of knee flexion (p < 0.01). Compared with reference length, the AMB and PLB were stretched during 0-30° and 0-10° respectively during OKC-10. During CKC exercises, the AMB and PLB were also stretched from 0 to 25°and 0-5°, respectively. Additionally, no significant difference was found in the length change of ACL bundles between BS and lunge. CONCLUSIONS: OKC-0 may be safe for the rehabilitation program after ACL reconstruction, and loaded exercises shall be applied when restricted with >30° in early-stage rehabilitation.

Asymmetry of Posterior Condyles in Resection Plane and Axial Curvature for Total Knee Arthroplasty.

OBJECTIVE: Understanding the morphology of the distal femur is essential for improving bone-implant match in total knee arthroplasty (TKA) and understanding the mechanisms behind knee kinematics. However, little is known about the asymmetry of the posterior condyles. Thus, this study aimed to thoroughly investigate asymmetries in sizes and shapes between the medial and lateral posterior condyles before and after femoral resections during TKA in osteoarthritic (OA) knees. METHODS: Three-dimensional femoral models of 74 OA knees were constructed using computed tomography images. The morphologic measurements of the posterior condyle pre- and post-simulated osteotomy for TKA included the radii of the posterior condyles fitted to a circle on the sagittal and axial planes of the femoral coordinate system, the inclination angle of the articular surface and resected surface, and the width and height of the resected surface. Differences in the data were assessed using Student's t-test, and correlations were evaluated using the Pearson product-moment correlation. RESULTS: The radii of the medial posterior condyles fitted to the circle were, on average, 6 mm larger than those of the lateral condyles on the axial plane (p < 0.001) and 0.7 mm smaller than those of the lateral condyles on the sagittal plane (p = 0.046). The inclination angles of the medial and lateral posterior condyles on the axial plane were significantly different with both pre-simulated and post-simulated osteotomy, respectively (both p < 0.001). The resected plane of the lateral posterior condyles displaced opposite inclination directions between the distal and proximal portions. Neither heights or widths of the medial posterior condyles were significantly different from those of their lateral counterparts (both p > 0.107). CONCLUSIONS: This study found asymmetrical inclination of the resected surface and coronal radii between the medial and lateral posterior condyles, which may relate to the posterolateral overhang of the lateral condyle after TKA and the progression of the knee OA. These findings provides valuable morphological information and may help improve the implant designs for TKA.

The position of entry point in total knee arthroplasty is associate with femoral bowing both in coronal and sagittal planes.

Objective: To investigate the femoral entry point of the intramedullary (IM) guiding rod applied to total knee arthroplasty (TKA) in Chinese subjects and the relationship with femoral bowing in the coronal and sagittal planes through three-dimensional (3D) validation methods. Methods: Computed tomography (CT) images of 80 femurs in Chinese subjects were imported into Mimics 19.0 to construct 3D models. All operations were conducted by Rhinoceros software 5.0. The position of the IM rod entry point was assessed by calculating the distance between the entry point and the apex of the intercondylar notch (AIN) in the coronal and sagittal planes. The coronal femoral bowing angle (cFBA) and sagittal femoral bowing angle (sFBA) were also measured. Results: The average optimal entry point was 0.17 mm medial and 12.37 mm anterior to the AIN in males, while it was 0.02 mm lateral and 16.13 mm anterior to the AIN in females. There was a significant difference between males and females in the sagittal plane (t = -6.570, p = 0.000). The mean cFBA was 1.68 ± 2.29°, and the mean sFBA was 12.66 ± 1.98°. The sFBA was strongly correlated with the anterior distance of the proper entry point, and the cFBA was moderately correlated with the lateral distance of the proper entry point. Conclusions: There was a strong correlation between the position of the entry point and the femoral bowing angle in both the coronal and sagittal planes. Thus, to achieve better alignment, the position of the entry point should be measured individually based on femoral bowing.

The Presence of Cartilage Affects Femoral Rotational Alignment in Total Knee Arthroplasty.

OBJECTIVE: To assess the difference between the posterior condylar angle (PCA) and the mechanical lateral distal femoral angle (mLDFA) in the osseous and cartilaginous contours in a non-arthritic Chinese population. METHODS: Computed tomography (CT) and magnetic resonance imaging (MRI) were obtained from 83 patients with knee injuries before arthroscopy, and femur and distal femoral cartilage three-dimensional (3D) models were constructed. The 3D cartilage model was arranged to share physical space with the 3D femoral model, and then PCA and mLDFA were measured on the osseous and cartilaginous contours, respectively. The differences between the measurements with and without cartilage were evaluated. RESULTS: The average PCA with cartilage was 2.88 ± 1.35° and without was 2.73 ± 1.34°. The difference was significant in all patients and females but not in males. The average mLDFA with cartilage was 84.73 ± 2.15° and without cartilage was 84.83 ± 2.26°, but the difference was statistically insignificant in all groups. CONCLUSION: PCA on the osseous and cartilaginous contours significantly differed with and without cartilage in the female group, suggesting that cartilage thickness should be considered during preoperative femoral rotational resection planning.

In-vivo tibiofemoral kinematics of the normal knee during closed and open kinetic chain exercises: A comparative study of box squat and seated knee extension.

A rehabilitation program after anterior cruciate ligament reconstruction is of great importance to obtain a satisfactory prognosis after surgery. However, there is still an onging debate over whether closed kinetic chain or open kinetic chain exercises should be chosen. Our study was designed to compare the in vivo tibiofemoral kinematics during closed kinetic chain and open kinetic chain exercises. Eighteen healthy volunteers were asked to perform box squat and unloaded/10 kg-loaded seated knee extension. In vivo 3-dimensional analysis of tibiofemoral kinematics of different motions were determined using a dual fluoroscopic imaging system. The study found significantly more tibial anterior displacement during loaded seated knee extension than during unloaded seated knee extension from 25°-50° of knee flexion (p ≤ 0.031). The knees exhibited significantly more internal tibial rotation and lateral tibial translation during the box squat than both seated knee extensions during mid-flexion. In addition, the knees showed less internal-external (IE) range of motion (ROM) from 20°- 75° of flexion (p < 0.001) and medial-lateral (ML) ROM from 75° to full extension (p ≤ 0.006) during box squat than both extensions. This knowledge may help optimize rehabilitation plans for patients post ACL reconstruction.

A New Reference Axis for Tibial Component Rotation in Total Knee Arthroplasty: A Three-dimensional Computed Tomography Analysis.

The purpose of this study was to introduce a new reference axis for tibial rotation in total knee arthroplasty (TKA) and verify its reliability. A consecutive series of 80 knees that underwent TKA from 2018 to 2020 as well as 80 healthy knees were analyzed using a three-dimensional tibial model. A coordinate system was established based on the standard TKA tibial cut. The line connecting the lateral-tibial eminence and the medial 1/3rd of the tibial tubercle or the medial border of the tibial tubercle was identified as the lateral eminence line (LE line) and the medial lateral eminence line (MLE line), respectively. To evaluate the reliability of the new reference axis, Akagi's line, the medial third of the tibial tubercle (1/3 line) was compared with the LE and MLE lines by measuring the angle between the lines and the Z-axis. In the coronal view, the intersection angle (TPA), which is composed of the line connecting the center of the medial and lateral tibial plateau with the Z-axis, was measured. The mean angle between Akagi's line and the Z-axis in the healthy group and the osteoarthritis (OA) group was 87.57 ± 3.48° and 87.61 ± 3.47°, respectively. The mean angle between the LE line and Z-axis in the healthy and OA groups was 87.15 ± 4.13° and 86.78 ± 3.95°, respectively. A weak correlation was found between the TPA and Akagi's line and the 1/3 line. A moderate correlation was observed between the TPA and LE lines. There were no significant differences between the healthy and OA groups (P > 0.05) in any of the four reference axes. The LE line showed excellent intra- and inter-observer reliability and reproducibility. The novel and easily drawn LE line is a preferable option for tibial component rotational alignment in TKA.

Elongation and orientation pattern of the medial patellofemoral ligament during lunging.

Unfavorable clinical outcomes after medial patellofemoral ligament (MPFL) reconstruction, such as early osteoarthritis of the patellofemoral joint, were considered to be associate with tunnel malpositioning. Length change studies have found that small changes in the femoral position can cause great changes in elongation trends. Further studying the MPFL kinematics may help us to understand the consequences of tunnel malpositioning and optimize the reconstruction techniques. Fifteen healthy subjects were studied with a combined computed tomography and biplane fluoroscopic imaging technique during a lunge motion. Five femoral and three patellar attachments were used to simulate different MPFL bundles. Kinematics of MPFL was defined as elongation and orientation changes (i.e., deviation angle and elevation angle). The mean deviation angle was 28.7° (95% confidence interval, 28.0°-29.4°) at full extension and remained nearly unchanged up to 60° of flexion, and increased to 56.5° (54.1°-58.9°) at 110°. The elevation angle decreased linearly from 12.6° (9.3°-15.9°) at full extension to -86.2° (-92.7-79.7°) at 110° of flexion. The MPFL was most stretched anteriorly and laterally relative to femur from full extension to 30° of flexion and remained near isometric beyond 30°. The current study found that proximal and anterior femoral attachments caused excessive lateral stretching of the MPFL at deeper flexion angles. Such abnormal MPFL kinematics may subsequently cause overconstraint and increased cartilage pressures of the medial patellofemoral joint.

[Features of the dual energy technique with dual-source computed tomography for anterior cruciate ligament injuries].

OBJECTIVE: To explore the diagnostic value of the dual-energy technique with dual-source computed tomography (DSCT) for anterior cruciate ligament injuries. METHODS: The clinical data of 8 patients with arthroscopic results were retrospectively reviewed. All patients underwent two- and three-dimensional imaging by multiplanar reconstruction, volume rendering, and tendon mode on DSCT. Dual-energy characteristics were compared with arthroscopic results. RESULTS: Six patients who were arthroscopically diagnosed as anterior cruciate ligament injuries, all of them were also correctly diagnosed by DSCT. Two patients who were arthroscopically diagnosed as normal, one was also diagnosed as normal by DSCT and the other was misdiagnosed. The overall agreement rate was 87.5% (7/8) . Under the dual energy tendon mode, the dual energy staining of the injured anterior cruciate ligament was lower than that of the contralateral normal cruciate ligament of the patient. CONCLUSION: The staining diminution in DSCT imaging may be a new feature that can be used to effectively diagnose anterior cruciate ligament injury.

Optimal Sagittal Insertion Depth and Direction of Femoral Intramedullary Rod in Total Knee Arthroplasty in Chinese Osteoarthritis Patients.

OBJECTIVE: To identify the optimal femoral intramedullary rod insertion depth and direction on the sagittal plane in total knee arthroplasty (TKA) of Chinese osteoarthritis (OA) patients. METHODS: From January to December 2019, CT data were collected for 85 consecutive entire lower extremity Chinese OA patients. A three-dimensional method was used to simulate intramedullary rod penetration. The intramedullary rods were inserted toward the anterior (TA), center (TC), and posterior (TP) of the femoral canal, respectively. Four penetration depths of 150, 200, 250, and 300 mm from the joint line were set. The intersection angle was measured between the simulated intramedullary rod and the mechanical axis of the femur (FMA) on the sagittal plane. RESULTS: Our study included 85 Chinese OA patients: 46 women, with a mean age of 65.7 ± 8.4 years (range, 51-85 years) and 39 men, with a mean age of 65.6 ± 8.1 years (range, 46-86 years). The intersection angle between the FMA and the femoral anatomical axis was smaller in men, 2.4° ± 1.6° (range, 0°-4.8°), than in women, 3.5° ± 2.3° (range, 0.7º-8.2°), with a significant statistical difference (P < 0.01). In the comparison of the intersection angle between the simulated intramedullary rod and the FMA, there was no statistical difference between TA200 and TC200 in women (P > 0.05). The proportions were up to 91% and 96% of TA200 at 0°-3° and 0°-5° intervals, respectively, but just 63% and 78% in TC200. In TA150, 76% of intersection angles were greater than 5°. Only approximately 60% in TA250 and TA300 were within the 0°-5° interval and 40% were less than 0°. Only 57% of intersection angles in TC150 were in the 0°-3° interval. TC250, TC300, and TP150 were mostly below 0°. In men, there were statistical differences between all groups. All intersection angles were greater than 5° in TA150. TA200 and TA250 were mostly greater than 5° (87% and 59%, respectively) and 72% of intersection angles were within 0°-5° interval in TA300. TC150 had 92% of intersection angles within the 0°-5° interval but only 62% between the 0° and 3° interval. In the TC200, up to 90% and 97% were within 0°-3° and 0°-5° intervals, respectively. TC300, TP150, and TP200 were mostly below 0°. CONCLUSION: We described an innovative method for rapidly, simply, and accurately identifying the sagittal insertion depth and direction of the femoral intramedullary rod in TKA, which can optimize the position of the femoral prosthetic component on the sagittal plane in TKA.

Formononetin inhibits osteosarcoma cell proliferation and promotes apoptosis by regulating the miR-214-3p/phosphatase and tensin homolog pathway.

BACKGROUND: Phytoestrogens have a similar molecular structure to estrogens which can produce either estrogenic or anti-estrogenic effects. It is generally believed that phytoestrogens combine with the estrogen receptor of osteosarcoma cells, affecting a variety of signal transduction pathways and cell metabolism, resulting in altered cell proliferation, differentiation, apoptosis, invasion and migration ability. Formononetin (FN) is the active ingredient of traditional Chinese medicine astragalus, angelica, and Pueraria lobate. Our study aims to detect the role of FN on MG-63 cell viability and apoptosis through regulating phosphatase and tensin homolog (PTEN) expression via MicroRNA-214-3p (miR-214-3p). METHODS: 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and Caspase 3 assay evaluated cell viability and apoptosis, respectively. Real-time quantitative polymerase chain reaction (qRT-PCR) and western blot evaluated the mRNA and protein expressions, respectively. The binding site of miR-214-3p/PTEN was detected via dual luciferase assay. RESULTS: FN suppressed cell viability and induced apoptosis, and decreased miR-214-3p level and promoted PTEN expression. PTEN was then regarded as a target of miR-214-3p, and FN improved PTEN level via inhibiting miR-214-3p. Further analysis showed that overexpressed miR-214-3p improved cell viability and suppressed apoptosis of MG-63 cells by inhibiting PTEN expression. CONCLUSIONS: Finally, our results revealed that FN inhibited cell viability and induced apoptosis by regulating miR-214-3p. FN acted as a new treatment for MG-63 cells via increasing PTEN level by inhibiting the miR-214-3p level.