Iron 3D-Orbital Configuration Dependent Electron Transfer for Efficient Fenton-Like Catalysis.

Transition metals are excellent active sites to activate peroxymonosulfate (PMS) for water treatment, but the favorable electronic structures governing  reaction mechanism still remain elusive. Herein, the authors construct typical d-orbital configurations on iron octahedral (FeOh ) and tetrahedral (FeTd ) sites in spinel ZnFe2 O4 and FeAl2 O4 , respectively. ZnFe2 O4 (136.58 min-1 F-1 cm2 ) presented higher specific activity than FeAl2 O4 (97.47 min-1 F-1 cm2 ) for tetracycline removal by PMS activation. Considering orbital features of charge amount, spin state, and orbital arrangement by magnetic spectroscopic analysis, ZnFe2 O4 has a larger bond order to decompose PMS. Using this descriptor, high-spin FeOh is assumed to activate PMS mainly to produce nonradical reactive oxygen species (ROS) while high-spin FeTd prefers to induce radical species. This hypothesis is confirmed by the selective predominant ROS of 1 O2 on ZnFe2 O4 and O2 •- on FeAl2 O4 via quenching experiments. Electrochemical determinations reveal that FeOh has superior capability than FeTd for feasible valence transformation of iron cations and fast interfacial electron transfer. DFT calculations further suggest octahedral d-orbital configuration of ZnFe2 O4 is beneficial to enhancing Fe-O covalence for electron exchange. This work attempts to understand the d-orbital configuration-dependent PMS activation to design efficient catalysts.

Selectively triggering photoelectromacro for CO2to CH4reduction over SrTiO3{110} facet with dual-metal sites.

In this article, the roles of surface-active sites in dominating photoelectron selectivity for CO2reduction products are well demonstrated over photocatalyst models of SrTiO3{100} and {110} facets. On the easily exposed {100} facets terminated with Sr-O atoms, photoelectrons are of 8 mol % for CH4and 92 mol % for CO generation. The Sr-O-Ti configuration in the {110} facets could enrich the surface charge density due to the lower interface resistance for higher photocatalytic efficiency (1.6 fold). The dual sites of Ti and adjacent Sr atoms are active for strong adsorption and activation of the generated CO* species from primary CO2reduction on the surface, thus kinetically favoring the activity of photoelectrons (73 mol %) in hydrogenation for CH2* species and hence CH4product. Inversely, the poor CH4selectivity is due to difficulty in the subsequent photoelectron reduction reaction by the weak adsorption of CO* at the single-Sr site on the {100} facets, independent of the electron and proton concentration. Our results may offer some illuminating insights into the design of a highly efficient photocatalyst for selective CO2reduction.

A Template Editing Strategy to Create Interlayer-Confined Active Species for Efficient and Durable Oxygen Evolution Reaction.

Substantial overpotentials and insufficient and unstable active sites of oxygen evolution reaction (OER) electrocatalysts limit their efficiency and stability in OER-related energy conversion and storage technologies. Here, a template editing strategy is proposed to graft highly active catalytic species onto highly conductive rigid frameworks to tackle this challenge. As a successful attempt, two types of NiO6 units of layered Ni BDC (BDC stands for 1,4-benzenedicarboxylic acid) metal organic frameworks are selectively edited by chemical etching-assisted electroxidation to create layered γ-NiOOH with intercalated Ni-O species. In such an interlayer-confined intercalated architecture, the large interlayer space with high ion permeability offers an ideal reaction region to sufficiently expose the OER active sites comprising high-density intercalated Ni-O species, which also suppresses the undesirable γ to ß phase transformation, thus exhibiting efficient and durable OER activity. As a result, water oxidation can occur at an extremely low overpotential of 130 mV and affords 1000 h stability at 100 mA cm-2 . The strategy conceptually shows the possibility of achieving stable homogeneous-like catalysis in heterogeneous catalysis.

Electrochemically stable frustrated Lewis pairs on dual-metal hydroxides for electrocatalytic CO2 reduction.

The sluggish kinetics of CO2 activation and reduction severely limit the energy conversion efficiency of electrocatalytic CO2 reduction into fuels. Here, ZnSn(OH)6 with an alternating arrangement of Zn(OH)6 and Sn(OH)6 octahedral units and SrSn(OH)6 with an alternating arrangement of SrO6 and Sn(OH)6 octahedral units were adopted to check the effects of frustrated Lewis pairs (FLPs) on electrochemical CO2 reduction. The FLPs were in situ electrochemically reconstructed on ZnSn(OH)6 by reducing the electrochemically unstable Sn-OH to Sn-oxygen vacancies (Sn-OVs) as a Lewis acid site, which are able to create strong interactions with the adjacent electrochemically stable Zn-OH, a Lewis base site. Compared to SrSn(OH)6 without FLPs, the higher formate selectivity of ZnSn(OH)6 originates from the strong ability of FLPs to capture protons and activate CO2via the electrostatic field of FLPs triggering better electron transfer and strong orbital interactions under negative potentials. Our findings may guide the design of electrocatalysts for CO2 reduction with high catalytic performances.

N-Doped Graphene-Coated Commercial Pt/C Catalysts toward High-Stability and Antipoisoning in Oxygen Reduction Reaction.

Stability and antipoisoning effects are the main challenges for the application of commercial Pt/C catalysts. Herein, we soaked and adsorbed polydopamine to coat Pt particles on commercial Pt/C and subsequently converted the coatings to few-layer N-doped graphene by calcination to produce Pt/C@NC. The coatings effectively block the direct contact of Pt nanoparticles and electrolyte, thus enhancing the catalyst stability by avoiding Ostwald ripening and suppressing the competitive adsorption of toxicants, contributing to the enhancement of the antipoisoning ability. More importantly, the coatings do not hurt the oxygen reduction reaction (ORR) activity of commercial Pt/C, which exhibits a half wave potential of 0.84 V in an acidic electrolyte. The spectroscopic and theoretical results confirmed that the coatings originate from a strong Pt bonding to pyridinic N of N-doped graphene and that the high ORR activity results from the coordinately unsaturated carbon atoms, as the real ORR active sites, to strongly capture electrons from Pt.

In Situ Tuning of Defects and Phase Transition in Titanium Dioxide by Lithiothermic Reduction.

Defects engineering of oxides plays a vital role in tuning their physicochemical and electronic properties and thereby determining their potential applications. However, the safe and controllable production of effective defects in the oxides is still challenging. Here, we report a facile one-pot solid lithiothermic reduction approach to generate graded oxygen defects in TiO2 nanoparticles. Various levels of lithium reduction are systematically studied, and meanwhile, a distinct phase transition from anatase TiO2 to cubic LixTiO2 is observed with the increasing lithium ratio. The structure and evolution of surface defects and bulk phase transition are investigated in detail. Afterward, we demonstrate their applications in carbon dioxide photoreduction and photothermal imaging. The slightly reduced TiO2 with effective oxygen defects affords a highly broadened solar spectrum absorption and yields significantly enhanced visible photocatalytic activity in CO2 conversion, which is further revealed by theoretical calculations. The highly reduced TiO2 with obvious phase transition shows enhanced solar absorption and achieves high photo-thermal-conversion efficacy, showing huge potential in photo-thermal-related applications. The lithiothermic reduction is a general and effective approach to produce defects and induce phase transition in oxides, which can be used in multiple applications.

One-step synthesis of IrOx-decorated ultrathin NiFe LDH nanosheets for efficient oxygen evolution reaction.

The oxygen evolution reaction (OER) is a vital proton donor for various clean energy technologies. Here, we synthesized IrOx-decorated ultrathin NiFe-LDH nanosheets (thickness 1-2 nm) by a one-step co-precipitation method. The IrOx was uniformly dispersed on the surface of ultrathin NiFe-LDH nanosheets, greatly increasing the active sites and the electric conductivity for NiFe-LDH. As a result, the IrOx/U-NiFe-LDH exhibited excellent OER performance with a low overpotential (236 mV) and a Tafel slope (74.3 mA dec-1).

Ta3N5 nanorods encapsulated into 3D hydrangea-like MoS2 for enhanced photocatalytic hydrogen evolution under visible light irradiation.

Tantalum nitride (Ta3N5) with an appealing band gap (∼2.1 eV) has emerged as a promising catalyst in the photocatalysis field. However, Ta3N5 application in the photocatalytic hydrogen evolution reaction (HER) is limited due to disadvantages such as unsatisfactory separation and transfer of photogenerated carriers. Here we utilize MoS2 as co-catalysts to promote the kinetics of photocatalytic H2 evolution over Ta3N5. The Ta3N5 nanorods were encapsulated into 3D hydrangea-like MoS2 for maximizing the contact areas between Ta3N5 and MoS2 and offering rich active sites. More importantly, spectroscopic analysis and theoretical calculations consistently reveal that the unique interfacial interaction, as well as the matching band alignment between Ta3N5 and MoS2, accelerates the photogenerated charge extraction from Ta3N5 to MoS2, reducing charge recombination losses in Ta3N5. Thus, the optimized Ta3N5/MoS2 hybrid exhibits a substantially enhanced hydrogen evolution rate (56.5 µmol h-1), over 22 times higher than that of pristine Ta3N5. This work may provide a general strategy to overcome the low photocatalytic activity of nitrides for hydrogen evolution.

Schottky junction effect enhanced plasmonic photocatalysis by TaON@Ni NP heterostructures.

We chemically deposited amorphous Ni(OH)2 layers over TaON particles with irregular surface morphology, and subsequently in situ reduced them to Ni (10-20 nm) nanoparticles, to construct a TaON@Ni photocatalyst. Such a hierarchical hybrid aims to combine the enhanced light absorption by the metal Ni plasmonic effect with accelerated charge separation by a Schottky barrier, and herein, achieves a higher photocatalytic activity in CO2 reduction than TaON.