In Vitro and Computational Studies of Perezone and Perezone Angelate as Potential Anti-Glioblastoma Multiforme Agents.

Glioblastoma multiforme (GBM) represents the most malignant type of astrocytoma, with a life expectancy of two years. It has been shown that Poly (ADP-ribose) polymerase 1 (PARP-1) protein is over-expressed in GBM cells, while its expression in healthy tissue is low. In addition, perezone, a phyto-compound, is a PARP-1 inhibitor with anti-neoplastic activity. As a consequence, in the present study, both in vitro and computational evaluations of perezone and its chemically related compound, perezone angelate, as anti-GBM agents were performed. Hence, the anti-proliferative assay showed that perezone angelate induces higher cytotoxicity in the GBM cell line (U373 IC50 = 6.44 µM) than perezone (U373 IC50 = 51.20 µM) by induction of apoptosis. In addition, perezone angelate showed low cytotoxic activity in rat glial cells (IC50 = 173.66 µM). PARP-1 inhibitory activity (IC50 = 5.25 µM) and oxidative stress induction by perezone angelate were corroborated employing in vitro studies. In the other hand, the performed docking studies allowed explaining the PARP-1 inhibitory activity of perezone angelate, and ADMET studies showed its probability to permeate cell membranes and the blood-brain barrier, which is an essential characteristic of drugs to treat neurological diseases. Finally, it is essential to highlight that the results confirm perezone angelate as a potential anti-GBM agent.

Evaluation of blood-brain barrier penetration and examination of binding to human serum albumin of 7-O-arylpiperazinylcoumarins as potential antipsychotic agents.

The delivery of drugs to the brain is complicated by the multiple factors including low blood-brain barrier (BBB) passive permeability, active BBB efflux systems, and plasma protein binding. Thus, a detailed understanding of the transport of the new potent substances through the membranes is vitally important and their physico-chemical characteristics should be analyzed at first. This work presents an evaluation of drug likeness of eight 7-O-arylpiperazinylcoumarin derivatives with high affinity towards serotoninergic receptors 5-HT1A and 5-HT2A with particular analysis of the requirements for the CNS chemotherapeutics. The binding constants to human serum albumin (HSA) were determined at physiological pH using fluorescence spectroscopy, and then their mode of action was explained by analysis of theoretical HSA complexes. Dynamic simulation of systems allowed for reliable evaluation of the interaction strength. The analyzed coumarins were able to pass BBB, and they present good drug likeness properties. They showed high affinities to HSA (log KQ = 5.3-6.0 which corresponds to -8.12 to -7.15 kcalmol-1 of Gibbs free energy). The changes of the emission intensity upon binding to HSA were scrutinized showing the different mode of action for 4-phenylpiperazinylcoumarins. The values of computed Gibbs free energy and determined on the basis of experimentally obtained binding constants log KQ coincide suggesting a good quality of the theoretical model. Overall the 8-acetyl-7-O-arylpiperazinyl-4-methylcoumarin derivatives represent valuable lead compounds to be further tested in various preclinical assays as a possible chemotherapeutics against CNS diseases. Studied coumarins can be metabolized by cytochrome P450 to aldehydes and hydroxy derivatives. The existence of other binding sites inside HSA than Sudlow's site 1 was postulated. The longer aliphatic linker between coumarin and piperazine moieties favored binding to HSA in other than Sudlow site 1 pocket.

Development of a validated strategy for the determination of tryptamine in human cerebrospinal fluid in the presence of competitors using molecularly imprinted polymers.

This study presents a validated strategy for the determination of tryptamine in the presence of its competitors, which involves the molecularly imprinted solid-phase extraction combined with high-performance liquid chromatography coupled with fluorimetric detection. Tryptamine-imprinted microscale sorbent was produced from 4-vinylbenzoic acid and ethylene glycol dimethacrylate in methanol by precipitation polymerization, and its imprinting factor was equal to 15.4 in static experiments or 18.6 in dynamic binding experiments. The method for tryptamine determination in the presence of serotonin and l-tryptophan was validated using a complex matrix of bovine serum albumin yielding the recoveries of tryptamine that ranged between 98.7 and 107.0%. Very low limits of detection and limits of quantification for tryptamine (19.9 and 60.3 nmol/L, respectively) allow the quantification of tryptamine in human cerebrospinal fluid in the presence of tryptophan and serotonin.

Efficient strategy for the selective determination of dopamine in human urine by molecularly imprinted solid-phase extraction.

An efficient molecularly imprinted solid-phase extraction protocol was developed for the separation of dopamine (DA) from human urine. After successful validation of the analytical method using high-performance liquid chromatography coupled with fluorescence detection, a new strategy for the selective determination of DA in the presence of norepinephrine and epinephrine in human urine was presented. In the proposed protocol, the LODs and quantification for DA were 166 ± 36 and 500 ± 110 nmol/L, respectively, and the total recoveries of DA in the range of 1-15 µmol/L varied between 98.3 and 101.1%. DA was detected in the real urine samples at the level of 47-167 µg/L (0.250-0.895 µmol/L). The superiority of the novel analytical strategy was shown by comparison with the results obtained for a commercially available imprinted sorbent.

Pentamidine analogs as inhibitors of [(3)H]MK-801 and [(3)H]ifenprodil binding to rat brain NMDA receptors.

The anti-protozoal drug pentamidine is active against opportunistic Pneumocystis pneumonia, but in addition has several other biological targets, including the NMDA receptor (NR). Here we describe the inhibitory potencies of 76 pentamidine analogs at 2 binding sites of the NR, the channel binding site labeled with [(3)H]MK-801 and the [(3)H]ifenprodil binding site. Most analogs acted weaker at the ifenprodil than at the channel site. The spermine-sensitivity of NR inhibition by the majority of the compounds was reminiscent of other long-chain dicationic NR blockers. The potency of the parent compound as NR blocker was increased by modifying the heteroatoms in the bridge connecting the 2 benzamidine moieties and also by integrating the bridge into a seven-membered ring. Docking of the 45 most spermine-sensitive bisbenzamidines to a recently described acidic interface between the N-terminal domains of GluN1 and GluN2B mediating polyamine stimulation of the NR revealed the domain contributed by GluN1 as the most relevant target.

Probing the relationship between anti-Pneumocystis carinii activity and DNA binding of bisamidines by molecular dynamics simulations.

The anti-Pneumocystis carinii activity of 13 synthetic pentamidine analogs was analyzed. The experimental differences in melting points of DNA dodecamer 5'-(CGCGAATTCGCG)2-3' complexes (ΔTm), and in the biological activity measured using ATP bioluminescence assay (IC50) together with the theoretical free energy of DNA-ligand binding estimated by the proposed computational protocol, showed that the experimental activity of the tested pentamidines appeared to be due to the binding to the DNA minor groove with extended AT sequences. The effect of heteroatoms in the aliphatic linker, and the sulfonamide or methoxy substituents on the compound inducing changes in the interactions with the DNA minor groove was examined and was correlated with biological activity. In computational analysis, the explicit solvent approximation with the discrete water molecules was taken into account, and the role of water molecules in the DNA-ligand complexes was defined.

In vitro screening of pentamidine analogs against bacterial and fungal strains.

A series of linear pentamidine analogs exhibiting low cytotoxicity, active against Pneumocystis carinii, were evaluated for in vitro activities against bacterial and fungal strains. The majority of the tested bis-amidines exhibited marked activities against Gram-positive strains. In view of the fact that the highest potency was found for 1,5-bis(4-amidinophenoxy)-3-thiapentane dihydrochloride 1j with the S atom in the middle of the aliphatic linker, four new pentamidines bearing S atoms were synthesized and also evaluated against MRSA strains. N,N'-Dialkylated pentamidines with S atoms in the linker are the promising lead structures for antimicrobials development.

Improving the Selectivity of the C-C Coupled Product Electrosynthesis by Using Molecularly Imprinted Polymer─An Enhanced Route from Phenol to Biphenol.

We developed a procedure for selective 2,4-dimethylphenol, DMPh, direct electro-oxidation to 3,3',5,5'-tetramethyl-2,2'-biphenol, TMBh, a C-C coupled product. For that, we used an electrode coated with a product-selective molecularly imprinted polymer (MIP). The procedure is reasonably selective toward TMBh without requiring harmful additives or elevated temperatures. The TMBh product itself was used as a template for imprinting. We followed the template interaction with various functional monomers (FMs) using density functional theory (DFT) simulations to select optimal FM. On this basis, we used a prepolymerization complex of TMBh with carboxyl-containing FM at a 1:2 TMBh-to-FM molar ratio for MIP fabrication. The template-FM interaction was also followed by using different spectroscopic techniques. Then, we prepared the MIP on the electrode surface in the form of a thin film by the potentiodynamic electropolymerization of the chosen complex and extracted the template. Afterward, we characterized the fabricated films by using electrochemistry, FTIR spectroscopy, and AFM, elucidating their composition and morphology. Ultimately, the DMPh electro-oxidation was performed on the MIP film-coated electrode to obtain the desired TMBh product. The electrosynthesis selectivity was much higher at the electrode coated with MIP film in comparison with the reference nonimprinted polymer (NIP) film-coated or bare electrodes, reaching 39% under optimized conditions. MIP film thickness and electrosynthesis parameters significantly affected the electrosynthesis yield and selectivity. At thicker films, the yield was higher at the expense of selectivity, while the electrosynthesis potential increase enhanced the TMBh product yield. Computer simulations of the imprinted cavity interaction with the substrate molecule demonstrated that the MIP cavity promoted direct coupling of the substrate to form the desired TMBh product.

Synthesis and antifungal activity of derivatives of 2- and 3-benzofurancarboxylic acids.

We found that amiodarone has potent antifungal activity against a broad range of fungi, potentially defining a new class of antimycotics. Investigations into its molecular mechanisms showed amiodarone mobilized intracellular Ca2+, which is thought to be an important antifungal characteristic of its fungicidal activity. Amiodarone is a synthetic drug based on the benzofuran ring system, which is contained in numerous compounds that are both synthetic and isolated from natural sources with antifungal activity. To define the structural components responsible for antifungal activity, we synthesized a series of benzofuran derivatives and tested them for the inhibition of growth of two pathogenic fungi, Cryptococcus neoformans and Aspergillus fumigatus, to find new compounds with antifungal activity. We found several derivatives that inhibited fungal growth, two of which had significant antifungal activity. We were surprised to find that calcium fluxes in cells treated with these derivatives did not correlate directly with their antifungal effects; however, the derivatives did augment the amiodarone-elicited calcium flux into the cytoplasm. We conclude that antifungal activity of these new compounds includes changes in cytoplasmic calcium concentration. Analyses of these benzofuran derivatives suggest that certain structural features are important for antifungal activity. Antifungal activity drastically increased on converting methyl 7-acetyl-6-hydroxy-3-methyl-2-benzofurancarboxylate (2b) into its dibromo derivative, methyl 7-acetyl-5-bromo-6-hydroxy-3-bromomethyl-2-benzofurancarboxylate (4).

Effective separation of dopamine from bananas on 2-(3,4-dimethoxyphenyl)ethylamine imprinted polymer.

A 2-(3,4-dimethoxyphenyl)ethylamine imprinted polymer (MIP(pt) ) was prepared via the precipitation polymerization together with a nonimprinted polymer (NIP). The morphology of particles was investigated by scanning electron microscopy and the specific surface areas were estimated by methylene blue adsorption (60.5 ± 3.5 and 36.9 ± 1.2 m(2)/g for MIP(pt) and NIP, respectively). The binding experiments were performed to determine the binding capacity of MIP(pt)/NIP particles toward dopamine. Next, the effects of solvents on loading, washing, and eluting steps were examined on solid-phase extraction (SPE). Methanol-water 85:15 v/v (loading step), methanol (washing step), and 0.04 M aqueous ammonium acetate-methanol 30:70 v/v (eluting step) were selected as the most effective systems. Described SPE protocol was successfully applied for separation of dopamine on 2-(3,4-dimethoxyphenyl)ethylamine imprinted particles. Finally, the molecularly imprinted polymer was used for determination of dopamine in spiked banana extract. The total recovery of dopamine from MIP(pt) was equal to 88.5 ± 4.6%, but from NIP was only 12.8 ± 2.3%. The developed material and method were demonstrated to be applicable for the separation of dopamine from bananas. The commercial sorbent C18 was not suitable to such application.

N-(2-Arylethyl)-2-methylprop-2-enamides as Versatile Reagents for Synthesis of Molecularly Imprinted Polymers.

The paper describes the formation of six aromatic N-(2-arylethyl)-2-methylprop-2-enamides with various substituents in benzene ring, viz., 4-F, 4-Cl, 2,4-Cl2, 4-Br, 4-OMe, and 3,4-(OMe)2 from 2-arylethylamines and methacryloyl chloride in ethylene dichloride with high yields (46-94%). The structure of the compounds was confirmed by 1H NMR, 13C NMR, IR, and HR-MS. Those compounds were obtained to serve as functionalized templates for the fabrication of molecularly imprinted polymers followed by the hydrolysis of an amide linkage. In an exemplary experiment, the imprinted polymer was produced from N-(2-(4-bromophenyl)ethyl)-2-methylprop-2-enamide and divinylbenzene, acting as cross-linker. The hydrolysis of 2-(4-bromophenyl)ethyl residue proceeded and the characterization of material including SEM, EDS, 13C CP MAS NMR, and BET on various steps of preparation was carried out. The adsorption studies proved that there was a high affinity towards the target biomolecules tyramine and L-norepinephrine, with imprinting factors equal to 2.47 and 2.50, respectively, when compared to non-imprinted polymer synthesized from methacrylic acid and divinylbenzene only.

Theoretical evaluation of EGFR kinase inhibition and toxicity of di-indol-3-yl disulphides with anti-cancer potency.

Research aimed at developing potent di-indol-3-yl disulphides for cancer diseases makes use of various theoretical techniques to evaluate the drug-likeness parameters and the mode of action. A drug-likeness filter helps evaluate the therapeutic potency of four bis-indole derivatives, structurally related to 3,3'-methanediyl-bis-indole (DIM) but having the S-S instead of the methylene linker and showing a high inhibitory impact on the variants of cancer cell lines (among them HL-60 and DU-145). Based on in vitro experimental results for their close analogues, a correlation was found between the epidermal growth factor receptor kinase (EGFR) inhibition and the theoretical energy of complexation. Docking studies of ligands followed by molecular dynamics were performed at the ATP-binding site of EGFR tyrosine kinase to scrutinize the inhibition of the di-indol-3-yl disulphides at a molecular level. Derivatives with bromine or iodine substituents at C-5 positions of the indole moieties made strong complexes by interaction with the most important hinge region residues Met-793 and Cys-733. The inhibition model for EGFR kinase and the proposed procedures can be very informative in the biological testing of selected bis-indoles and may be useful for future research on effective inhibitors for the treatment of EGFR-related cancer.Communicated by Ramaswamy H. Sarma.

Polytyramine Film-Coated Single-Walled Carbon Nanotube Electrochemical Chemosensor with Molecularly Imprinted Polymer Nanoparticles for Duloxetine-Selective Determination in Human Plasma.

We devised, fabricated, and tested differential pulse voltammetry (DPV) and impedance spectroscopy (EIS) chemosensors for duloxetine (DUL) antidepressant determination in human plasma. Polyacrylic nanoparticles were synthesized by precipitation polymerization and were molecularly imprinted with DUL (DUL-nanoMIPs). Then, together with the single-walled carbon nanotube (SWCNT) scaffolds, they were uniformly embedded in polytyramine films, i.e., nanoMIPs-SWCNT@(polytyramine film) surface constructs, deposited on gold electrodes by potentiodynamic electropolymerization. These constructs constituted recognition units of the chemosensors. The molecular dynamics (MD) designing of DUL-nanoMIPs helped select the most appropriate functional and cross-linking monomers and determine the selectivity of the chemosensor. Three different DUL-nanoMIPs and non-imprinted polymer (nanoNIPs) were prepared with these monomers. DUL-nanoMIPs, synthesized from respective methacrylic acid and ethylene glycol dimethyl acrylate as the functional and cross-linking monomers, revealed the highest affinity to the DUL analyte. The linear dynamic concentration range, extending from 10 pM to 676 nM DUL, and the limit of detection (LOD), equaling 1.6 pM, in the plasma were determined by the DPV chemosensor, outperforming the EIS chemosensor. HPLC-UV measurements confirmed the results of DUL electrochemical chemosensing.

Cilostazol-imprinted polymer film-coated electrode as an electrochemical chemosensor for selective determination of cilostazol and its active primary metabolite.

An electrochemical chemosensor for cilostazol (CIL) determination was devised, engineered, and tested. For that, a unique conducting film of the functionalized thiophene-appended carbazole-based polymer, molecularly imprinted with cilostazol (MIP-CIL), was potentiodynamically deposited on a Pt disk electrode by oxidative electropolymerization. Thanks to electro-oxidation potentials lower than that of CIL, the carbazole monomers outperformed pyrrole, thiophene, and phenol monomers, in this electropolymerization. The pre-polymerization complexes quantum-mechanical and molecular dynamics analysis allowed selecting the most appropriate monomer from the three thiophene-appended carbazoles examined. The electrode was then used as a selective CIL chemosensor in the linear dynamic concentration range of 50 to 924 nM with a high apparent imprinting factor, IF = 10.6. The MIP-CIL responded similarly to CIL and CIL's pharmacologically active primary metabolite, 3,4-dehydrocilostazol (dhCIL), thus proving suitable for their determination together. Simulated models of the MIP cavities binding of the CIL, dhCIL, and interferences' molecules allowed predicting chemosensor selectivity. The MIP film sorption of CIL and dhCIL was examined using DPV by peak current data fitting with the Langmuir (L), Freundlich (F), and Langmuir-Freundlich (LF) isotherms. The LF isotherm best described this sorption with the sorption equilibrium constant (KLF) for CIL and dhCIL of 12.75 × 10-6 and 0.23 × 10-6 M, respectively. Moreover, the chemosensor cross-reactivity to common interferences study resulted in the selectivity to cholesterol and dehydroaripiprazole of 1.52 and 8.0, respectively. The chemosensor proved helpful in determining CIL and dhCIL in spiked human plasma with appreciable recovery (99.3-134.1%) and limit of detection (15 nM).

Synthesis of homoveratric acid-imprinted polymers and their evaluation as selective separation materials.

A bulk polymerization method was used to easily and efficiently prepare homoveratric acid (3,4-dimethoxyphenylacetic acid)-imprinted polymers from eight basic monomers: 2-vinylpyridine, 4-vinylpyridine, 1-vinylimidazole, N-allylaniline, N-allylpiperazine, allylurea, allylthiourea, and allylamine, in the presence of homoveratric acid as a template in N,N-dimethylformamide as a porogen. The imprinted polymer prepared from allylamine had the highest affinity to the template, showing an imprinting factor of 3.43, and allylamine polymers MIP8/NIP8 were selected for further studies. Their binding properties were analyzed using the Scatchard method. The results showed that the imprinted polymers have two classes of heterogeneous binding sites characterized by two pairs of K(d), B(max) values: K(d)(1) = 0.060 µmol/mL, B(max)(1) = 0.093 µmol/mg for the higher affinity binding sites, and K(d)(2) = 0.455 µmol/mL, B(max)(2) = 0.248 µmol/mg for the lower affinity binding sites. Non-imprinted polymer has only one class of binding site, with K(d) = 0.417 µmol/mL and B(max) = 0.184 µmol/mg. A computational analysis of the energies of the prepolymerization complexes was in agreement with the experimental results. It showed that the selective binding interactions arose from cooperative three point interactions between the carboxylic acid and the two methoxy groups in the template and amino groups in the polymer cavities. Those results were confirmed by the recognition studies performed with the set of structurally related compounds. Allylamine polymer MIP8 had no affinity towards biogenic amines. The obtained imprinted polymer could be used for selective separation of homoveratric acid.

[Investigations of molecularly imprinted polymers for medical diagnostics and clinical analysis]. / Poszukiwania polimerów ze sladem molekularnym do diagnostyki medycznej i analizy klinicznej.

The review focuses on progress of molecularly imprinted polymers for medical diagnostics and clinical analysis. This class of new and selective polymeric materials could find future applications in monitoring of diabetes and tumors, in diagnostics of kidney and heart diseases, arteriosclerosis or in blood analysis.

Deposition of pentamidine analogues in the human body - spectroscopic and computational approaches.

Bis-benzamidines are a diverse group of compounds with high potential in pharmacotherapy, and among them, pentamidine is a drug of great therapeutic significance in Pneumocystis jiroveci pneumonia (PJP) prophylaxis and therapy. Pharmacokinetic properties of these cationic species such as transport, acid/base equilibria, and interactions with potential target molecules are still of interest, especially for recently designed compounds. To broaden our knowledge drug-likeness, human serum albumin binding, and acidity constants (Ka) were experimentally and theoretically examined for five pentamidine analogues 1 - 5 with -NH-CO-chain-CO-NH-bridges of increasing length and O, N, and S atoms in the chain. The studied analogues display very marked activity against Pneumocystis carinii without cytotoxicity that inspired us to perform an in silico analysis of their mode of action based on the hypothesis that the small DNA groove of rich in adenine-thymine pairs is their molecular target. These studies allowed us to classify them as very promising lead molecules.

Molecularly imprinted polymer nanoparticles-based electrochemical chemosensors for selective determination of cilostazol and its pharmacologically active primary metabolite in human plasma.

Molecularly imprinted polymer (MIP) nanoparticles-based differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) chemosensors for antiplatelet drug substance, cilostazol (CIL), and its pharmacologically active primary metabolite, 3,4-dehydrocilostazol (dhCIL), selective determination in human plasma were devised, prepared, and tested. Molecular mechanics (MM), molecular dynamics (MD), and density functional theory (DFT) simulations provided the optimum structure and predicted the stability of the pre-polymerization complex of the CIL template with the chosen functional acrylic monomers. Moreover, they accounted for the MIP selectivity manifested by the molecularly imprinted cavity with the CIL molecule complex stability higher than that for each interference. On this basis, a fast and reliable method for determining both compounds was developed to meet an essential requirement concerning the personalized drug dosage adjustment. The limit of detection (LOD) at the signal-to-noise ratio of S/N = 3 in DPV and EIS determinations using the ferrocene redox probe in a "gate effect" mode was 93.5 (±2.2) and 86.5 (±4.6) nM CIL, respectively, and the linear dynamic concentration range extended from 134 nM to 2.58 µM in both techniques. The chemosensor was highly selective to common biological interferences, including cholesterol and glucose, and less selective to structurally similar dehydroaripiprazole. Advantageously, it responded to dhCIL, thus allowing for the determination of CIL and dhCIL together. The EIS chemosensor appeared slightly superior to the DPV chemosensor concerning its selectivity to interferences. The CIL DPV sorption data were fitted with Langmuir, Freundlich, and Langmuir-Freundlich isotherms. The determined sorption parameters indicated that the imprinted cavities were relatively homogeneous and efficiently interacted with the CIL molecule.

Low-oxidation-potential thiophene-carbazole monomers for electro-oxidative molecular imprinting: Selective chemosensing of aripiprazole.

New thiophene-carbazole functional and cross-linking monomers electropolymerizing at potentials sufficiently low for molecular imprinting of an electroactive aripiprazole antipsychotic drug were herein designed and synthesized. Numerous conducting molecularly imprinted polymer (MIP) films are deposited by electropolymerization at relatively low potentials by electro-oxidation of pyrrole, aniline, phenol, or 3,4-ethylenedioxythiophene (EDOT). However, their interactions with templates are not sufficiently strong. Hence, it is necessary to introduce additional recognizing sites in these cavities to increase their affinity to the target molecules. For that, functional monomers derivatized with substituents forming stable complexes with the templates are used. However, oxidation potentials of these derivatives are often, disadvantageously, higher than that of parent monomers. Therefore, we designed and synthesized new functional and cross-linking monomers, which are oxidized at sufficiently low potentials. The deposited MIP and non-imprinted polymer (NIP) films were characterized by PM-IRRAS and UV-vis spectroscopy and imaged with AFM. The structure of the aripiprazole pre-polymerization complex with functional monomers was optimized with density functional theory (DFT), and aripiprazole interactions with imprinted cavities were simulated with molecular mechanics (MM) and molecular dynamics (MD). MIP-aripiprazole film-coated electrodes were used as extended gates for selective determination of aripiprazole with the extended-gate field-effect transistor (EG-FET) chemosensor. The linear dynamic concentration range was 30-300 pM, and the limit of detection was 22 fM. An apparent imprinting factor of the MIP-1 was IF = 4.95. The devised chemosensor was highly selective to glucose, urea, and creatinine interferences. The chemosensor was successfully applied for aripiprazole determination in human plasma. The results obtained were compared to those of the validated HPLC-MS method.

Examination of imprinting process with molsidomine as a template.

Eight different functional monomers were used with ethylene glycol dimethacrylate as a cross-linker and molsidomine as a template to obtain molecularly imprinted polymers (MIPs). Non-covalent interactions between molsidomine and each functional monomer in DMSO prior to thermal bulk polymerization were utilized. On the basis of calculated imprinting factors, MIP prepared with N,N'-diallyltartaramide was chosen for further investigations. Examination of interactions in the prepolymerization complex between molsidomine and N,N'-diallyltartaramide was performed using the Job method. The absorbance of isomolar solutions reaching a maximum for the molar ratio of template to monomer equal to 1:4. Scatchard analysis was used for estimation of the dissociation constants and the maximum amounts of binding sites. The polymer based on N,N'-diallyltartaramide has two classes of heterogeneous binding sites characterized by two values of K(d) and two B(max): K(d)(1) = 1.17 mM(-1) and B(max)(1) = 0.8 mumol/mg for the higher affinity binding sites, and K(d)(2) = 200 microM(-1) and B(max)(2) = 2.05 mumol/mg for the lower affinity binding sites. Furthermore, effects of pH and organic solvent on binding properties of MIP and NIP were investigated, together with release of molsidomine from both MIP and NIP.